2336 modeli
Cyclo valve cover for 6 and 8 mm valves I recommend putting a collar around the valves so that they hold well on the printing plate
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
Info: another hand model for valve cap ALOHA! Not for presta valve! Print instructions: 0.4mm nozzle works good for me (for my MTB), I have already scaled original to best fit, so just print this at 100% scale or adjust slightly. 3mf file…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu
Customizable car / bike tire valve (Schrader) cap with thread. The thread starts from the middle so you don't need to make so many turns and it's easier to put on. There's an extra space for a tip. Print instructions Any filament works…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Info: remixed Robin_Pe rude finger cap found out, that his version printed at 97% with 0.4mm nozzle works great for me (Prusa MK3S+) Not for presta valve ! Print instructions: 0.4mm nozzle works good for me (for my MTB), I have already…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
I had trouble printing existing Schrader valve cap models in PETG, so I designed my own. This model has some error tolerances built in so it should work better with PETG which isn't as dimensionally accurate as PLA. Print in 0.15 layer…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Need a custom adapter for your cyclone separator? Comment the required inlet and outlet dimensions and I’ll make and upload it for you. This 3D-printable cyclone separator efficiently removes dust and debris from your vacuum system —…
Wydruk około 2,35 €–2,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a very simple emergency low-pressure water ball valve that can be printed quickly in place (print-in-place) and with no assembly. ver. 1 with 0,3 mm tolerances (in optimization, with comments…) Should be printed using mechanically…
Wydruk około 1,82 €–2,23 € nettoWstępna wycena jednego wariantu
Info: another hand model for valve cap Not for presta valve! Print instructions: 0.4mm nozzle works good for me (for my MTB), I have already scaled original to best fit, so just print this at 100% scale or adjust slightly. 3mf file…
Wydruk około 0,80 €–0,97 € nettoWstępna wycena jednego wariantu
Info: remixed my previous horns cap print - now with open thumb horns Not for presta valve! Print instructions: 0.4mm nozzle works good for me (for my MTB), I have already scaled original to best fit, so just print this at 100% scale or…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
🚴💨 Spin Your Ride – Bicycle Spoke / Valve Propeller Fun! 🌀 Why just ride when you can fly ? This 3D-printed propeller spoke/valve cover turns your bicycle into a mini aircraft (well… in spirit at least😉). As you ride, the propeller spins…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a tire valve cap with a Toyota logo I made to give as a gift. Super easy to print. Color change is at 14.3. You may need to print it with a brim. The pre-sliced file is for 5 caps.
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Ich brauchte einen Ersatzknauf/-griff für meinen Wasseranschluss meiner Waschmaschine im Keller. Dieser hat die, meiner Meinung, nach unschönen Rastbuchsen mit 7,7mm Durchmesser. Ich hab ein stark verändertes Remix durchgeführt und tadaa,…
Wydruk około 1,78 €–2,18 € nettoWstępna wycena jednego wariantu
What is a check valve? A check valve only allows fluid (gas or liquid) to flow freely in one direction (marked by arrow), whilst blocking it in the opposite direction. This valve does not seal perfectly, this is due to the tolerances…
Wydruk około 1,29 €–1,57 € nettoWstępna wycena jednego wariantu
Take a look at Shrek Valve Cap ! --------------------------------- Good looking valve cap for your bike made for Schrader type valve = most common --------------------------------------------- Print : 0.15mm NO Supports PLA, PETG, ABS…..
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
Starship shaped valve cap for Schrader and Presta valve types
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Inspired by the Valve Index Boomerang Charger and my lack of desk space. Thank you to Valve for sharing their Index CAD files. Make sure you have good layer adhesion and test the print, don't blame me for a dropped headset. The holder…
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
Hex valve cap with Moai on top got the valve cap base form here https://www.printables.com/model/524947-hexagon-presta
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
The Temset radiator uses a valve for which no adapters seem to exist. But for the installation of an eQ-3 eqiva thermostat, an M30x1.5 thread is required. The adapter makes it possible to install such a thermostat but the pin of the valve…
Wydruk około 1,29 €–1,57 € nettoWstępna wycena jednego wariantu
Schrader tyre valve to airbed mattress valve adaptor, Printed in PLA. No supports. Print wide end down. Requires you to punch out hole with small screwdriver Used variable heights in Prusaslicer, main body printed @ 0.2 and screw thread…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
Just a remix of a hexagon presta valve cap and a money statue, fits perfectly and snug, doesn't move around. pretty strong threads
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Info: another model for valve cap - Lego man this time Not for presta valve! Print instructions: 0.4mm nozzle works good for me (for my MTB valve), so just print this at 100% scale or adjust slightly. body 3mf file contains variable layer…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
Take a look at Bullet Valve Cap! Shrek Valve Cap made for Schrader type valve = most common Print : 0.15mm No Supports needed PLA, PETG, ABS…..
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Now you can print the block and valve covers in different colors of the 3DLabPrint Piper J-3 Cub for a more detailed look.
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
I made my own version of the lowpoly index visor after seeing a lot of people where having trouble printing the other one on thingiverse
Wydruk około 3,28 €–4,01 € nettoWstępna wycena jednego wariantu
I needed an additional valve shutoff knob since one of the automatic ones was malfunctioning. Checked the dimensions and designed this knob. Important information for printing: Depending on your tolerances, you will need to scale the…
Wydruk około 1,32 €–1,61 € nettoWstępna wycena jednego wariantu
Spare part: water valve lever
Wydruk około 0,31 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This print is used to help organize the super long cables for the Valve Index Basestations (SteamVR2). To use, detach the cable from the brick, slide the brick into the model, reattach the cable and wrap around the brick, finally plug in…
Wydruk około 2,33 €–2,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This remix increses the size of the hooks, to make the clamp fit better when printed on lower-end printers. Remixed from: https://www.thingiverse.com/thing:4908421 Category: Video Games
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Siehe auch " Upgrade zu meinem Modell "Ventilkappe Schraderventil mit Werkzeug"/ Upgrade to my model “Schrader valve cap with tool ” Vor allem am Vorderreifen unseres Elektrorollers Mi 3 ist es sehr schwierig, die Ventilkappe zu…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Updated to version v4.1: Reported that overhang (and other possible print material remains) inside the caps' hole may deflate a tire, therefore: The caps height increased by 2 mm. The caps inside hole end is modified to conical shape,…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
Does exactly what it says on the tin. Screw cap for scuba cylinder DIN valves to prevent dust and other crap getting into the valve. Has a hole on the outside for threading through a string and attaching to the cylinder. Edit 03/06/2025:…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
Remix of GLeZz's Red Valve Extruder Visualizer to fit bowden extruders on Anycubic Kobra Go / Ender 3. Downscaled. Print with supports, split the valve into two parts to save material, print the nut separately. Fits to stock extruder on…
Wydruk około 0,86 €–1,06 € nettoWstępna wycena jednego wariantu
Heart shaped Shrader valve stem dust cap. The included Gcode file prints at just the right size on my Artillery Genius Pro, but your experience may vary.
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
Info: another model for valve cap - for schrader valve (the type used in cars) changing colors via color change (no MMU needed) for flags with horizontal stripes vertical stripes ❗ Not for presta valve! Print instructions: 0.4mm nozzle…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
WARNING: Tilting could still cause strain close to the connector in front of the facial interface.
Wydruk około 0,36 €–0,43 € nettoWstępna wycena jednego wariantu
This adapter allows attaching standard quarter-turn actuators to cheap PVC ball valves to automate them. It provides a standard ISO 5211 F04 mount. Mounting The adapter is designed for valves with a body diameter of ~41.6mm. Here is a…
Wydruk około 3,46 €–4,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ich habe das Werkzeug zum Lösen der Ventilkappe meines Modells " Ventilkappe Schraderventil mit Werkzeug " verbessert. Ich habe das Werkzeug etwas modifiziert, damit es besser greift. Außerdem habe ich einen 5mm-Sechskant für einen…
Wydruk około 0,25 €–0,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My print reccomended tips: 3 perimeters, 100 % infill ASA or PETG 0,1-0,15 mm layer height (important for the thread printing) fuzzy skin on outside walls (for the rougher cap surface) 0,4 mm nozzle use a brim no support needed For the…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
Handles for the hot water / and steam valve Profitec Pro300 with 6 mm valve axis The core (here made of orange Prusa ABS) should be printed from ABS or a similar material, as other materials become soft and deformed by the heat. I printed…
Wydruk około 0,54 €–0,67 € nettoWstępna wycena jednego wariantu
Take your time. Don't rush this piece. This is used to organize the valves, springs, and spring clips of a MOPAR LA Small Block 360/318. I'm working on a 1985 Ramcharger and rebuilding the engine with new gaskets, seals, and other…
Wydruk około 47,23 €–57,73 € nettoWstępna wycena jednego wariantu
My Print Parameters: Resolution: 0.2 Seam position: Random Infill: any Perimeters: 4 Rafts: No Supports: No Material: PETG I used the 4x10 screw with lens head to fix it to the plastic sill.
Wydruk około 0,22 €–0,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update June 1, 2023: After 3 years of being in direct sunlight and intense Texas heat this replacement part is still holding up. I've probably had this solid brass shutoff valve and quick connect for 30 years. So when the knob for the…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Einfache Ventilkappen für Schrader Ventile mit dem neuen Volkswagen Logo. Simple valve caps for Schrader valves, featuring the new Volkswagen logo.
Wydruk około 1,07 €–1,30 € nettoWstępna wycena jednego wariantu
Replacement slider inside vacuum valve. Mopar part #3748429, C-body cars 1974-78. Might work on 1969-73 (Mopar #2950115) also despite valve being different externally. I have multiple valves and all of them had pin sheared off due to old…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Douk Audio U10 Mini Tube Headphone Amplifier comes with a perspex shield which I don't like. So I made this instead which when printed in eSUN Copper PLA+ I think looks better.
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
Présentation du modèle : Cette valve anti-retour est conçue pour faciliter la vidange d’une piscine tout en empêchant le reflux d’eau dans le circuit. Vidange piscine, système de filtration et pompe à chaleur. Le système comprend trois…
Wydruk około 3,73 €–4,56 € nettoWstępna wycena jednego wariantu
Print your own valve caps for your car and bike. This cap fits a standard Schrader valve. These caps have more threads than normal, so they stick better, and you don't loose them. -Print with 0.1mm layer height for good detail -Add a 10mm…
Made for Schrader type valve. (the most common type) Fits mountain bikes, road bikes, cars and motorcycles. 0.15mm tolerance on the default model and 0.05mm on the tight version Optimized for 0.12mm layer height. Please, share your…
This project is a fully functional V8 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-8-4-3-6-5-7-2, Fully printable timing chain, Can be…
************************************************************************************************** See this YouTube video by Nils Rasmusson ( https://www.thingiverse.com/the3dprintingzone/designs ) for a performance comparison of this…
I needed some air duct valves to control ventilation for several printers. I made some of PeterH1500's ball valves which are really good, but they are too heavy duty for some of my uses. I needed a lightweight valve that was cheap to make…
TL;DR: Model B “Recommended” is the most aesthetically pleasing, Model C “Minimalist” is the smallest and fastest to print and will fit better in a pouch/case/bag. The purple one on the main picture is Model B, the light blue one is Model…
From left to right on 2nd image; 1: Round Top 2: Flat Top 3-5: O-Ring Sealing, Plus Cutaways, SAE AS 010 and Metric 2x6mm O-Ring Sized Versions 6: TPU Printable O-Ring Insert for SAE and Metric Sized Caps (Insert so 45 degree angle faces…
Wanted a cap that sat a little firmer on, as they tend to fall off, or crack when you try to make them sit well. Recommends printing with maximum 0.1 layer height. Printing multiple at once is no problem. Remember dry filament. You might…
Loved this design, wanted it to make a Valve cover! Can be tight to get on the valve stem at first but keep it nice and straight and it goes on great! Printed this in Yellow PLA at 0.3mm with a little bit of variable layer height on the…
A small but very useful helper for vacuum bags. This allows the air to be extracted much easier and faster. You can simply stick the part with some double-sided tape from the inside to the valve. Of course it works without tape but then…
Źródło oznaczyło ten model jako treść 18+.
this part: https://1url.cz/FKSrA for this valve: https://1url.cz/EKSry only small O-ring needed
Why: I have a lot of troubles with getting all the parts needed for making this engine. Moreover, some parts just does not work very well, causing mechanism destruction. I'm sharing modified parts that allowed me finishing that project.…
This project is a fully functional V6 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-2-3-4-5-6, Fully printable timing chain, Can be…
See this YouTube video by Nils Rasmusson https://www.thingiverse.com/the3dprintingzone/designs for a performance comparison of this blast gate with other commercially available designs…
Źródło oznaczyło ten model jako treść 18+.
PLA / PETG 0,1-0,2
Update 07 Apr 24 A truncated version of this style and size of blast gate is now available (Print 835725) Update 06 Apr 24 Uploaded 63mm to 50mm adapter. The 63mm end sleeves outside the ball valve exit/entry tube (1.5mm taper), the 50mm…
This ball valve can be used to reduce flow a little or shut it completely. It is fully printable and has a ¾" tread on both sides, so you can use it with a lot of other hose connectors you might already have at home. Printing: Print all…
Ever forget to close up your gas cylinders and then donate your bottle gas to the atmosphere? This project fits onto a 5-lobe Sherwood cylinder gas valve and provides an instant visual indicator if the valve is opened or closed: The…
Check out the video around this project!: https://youtu.be/1E3Ajqaapqk 0.4mm Nozzle 0.2mm Layer height
Super easy to print valve stem cap fits standard valve stem on all types of vehicles no supports If you like this model check out this one https://www.printables.com/model/1381047-valve-stem-cap-with-print-in-place-air-release
For my new Eurotronic Spirit smart radiator valves I needed a clean and easy adapter. There are many adapters out there that are quite bulky, couldn't figure out why that would be necessary... So designed my own in a few minutes. My…
Please note that our files are free for personal printing use. If you are commercially printing any of our files, you must be a club member.
I can't find the original file I used to create this Valve Cap. It's an emoji, open source - right? Print Settings Printer: Qidi Tech x-One 2 Rafts: No Supports: Yes Resolution: .10 Infill: 15% Filament: Hatchbox PLA Gray Category: 3D…
Used for regulating airflow in a hose, like used for air stones in fish tanks. Printing: Print all parts in the given orientation. 0.2mm layerhight is recommended. Use: Feed the hose through the valve and tighten it for regulating the…
A Tesla Valve is a type of one-way fluid valve that has no moving parts. Category: Engineering
Update 01Sep20 I have an alternative design of blast gate that may be better suited to extraction of larger chips and shavings. 63mm (2½") ball valve: print 137795 A 100mm (4") ball valve: print 137794 This is a 100mm (or 4 inch) version…
Assembled with all of the same hardware as the original one, plus 2 longer bolts. I used 35mm I believe. Here is the link to the video where I talk about the servo motors I used.
Combination of two models from Thingiverse: Middle Finger Schrader Valve Cap Presta Valve Cap This is the first iteration of this design, made in a few hours pretty roughly. Threads came out pretty nice with no supports inside the valve…
Gardena connector to tyre valve adapter, I used the ring seal of an original adapter but you can also print one with TPU (file included). Perfect to blow the water out of garden hoses or tubes before the winter with a compressor. Update…
This tool can remove the valve core from Schrader-style valve stems. These are commonly found on mountain bikes, car tires, HVAC, and water rocket launchers . As this is a plastic tool, it cannot match the strength of a machined metal…
Deutsch Ich habe ein aufblasbares Bodyboard. Das ist gut für Flugreisen, aber die Pumpe ist zu groß um sie mitzunehmen. Deshalb habe ich einen Adapter auf Schrader-Ventil (Auto-Ventil) konstruiert. So kann ich das Board auch mit einer…
Custom Bike Valve Stem Caps — “Brick Galaxy” (Star-Wars-inspired) Bring a little Force to your wheels! These Star-Wars-inspired LEGO-style valve caps snap personality onto your bike in seconds. I modeled a set of 7 mini “heads” and turned…
.4 nozzle .2 layer tapered hole for times when you have elephant foot I have printed it in PLA, PETG, ABS I have no idea where the file came from, I can't find the exact match on sites picked something close because printables made me
Info: another bike valve cap model I took skull base from @ncsandor (thanks for design!) and remodelled with some terrifying factors and adjusted so it match valve cap and is still printable without supports Not for presta valve! Print…
This is a simple, minimalistic base to set Valve's Index controllers on for storage and charging. The base measures 3.625"W x 3.625"D x 2.5"H. The correct charging cables must be used to work with the base properly. A small capsule-shaped…
Valve Tyre with Volkswagen logo
General A Overhead Camshaft engine is an internal combustion engine with the camshaft placed in the cylinder head. This single cylinder model has four valves, with an engine capacity of 30 cc. This model was designed in Tinkercad.…
I have modeled this usefull bike tool. But I have modified original design to be able to use both "holes" to screw/unscrew presta valve core (see attached photos). I have tested and fits perfect, no loose. Enjoy Print instructions…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 These models are butterfly valves for flexible 100mm, 125mm and 150mm pipes commonly used in ventilation. They are made to fit inside the pipes, and for you to clamp the pipes onto it from the outside. They print with no…
Made for the Replacement Parts contest. The core model is a functional replacement for Presta and Shrader type dust caps as round on most cars and bicycles. After printing check internally for any hanging plastic which could depress the…
Version 4 added 8/13/25 but is untested. This is a simple valve spring compressor tool I designed for the M54/52 cylinder heads. I printed this in Overture PC on a Bambu Lab X1C in draft mode (0.28mm layer height) with 4 perimeters and…
STORMTROOPER VALVE STEM CAP FITS AUTO AND BIKE SCHRADER VALVE THREAD PERFECT FIT NO SUPPORTS PRINTED WIH REVO 6 .15 WITH 15%INFIL STANDARD SETTINGS
Gary Wilson Jr. (named by GF) designed for Project “Cocktail mixer”: intended for 6 mm PTFE-Tube (might also work for smaller an up to 7-8 mm) -controlled by Micro Server 9g (SG90) printed in regular PLA Since I´m still working on a…
Dunlop or Woods valves are usually used for inner tubes for bicycles. According Wikipedia these valves are not common in the US and are generally found on bicycles in Europe and Asia. The thread isn't exactly 1:1 to the valve thread but…
Decorative Croc valve stem cover. Includes both schrader and presta valve cap styles. After several test prints, found it came out best printing on it's side with some supports. Also remixed from the following:…
This model is a universal valve cap that can be used on Schrader valves which are on cars and bikes.
Helps clean carbon from the valves on various VW and Audi engines. Instructions and usage pictures can be found elsewhere. Originally designed to fit a BPY FSI engine. BPY, 2.0T, S4 3.0L Fusion 360 file: https://a360.co/2XFetag Print…
Description: Never lose your road bike pump adapter again! This 3D printable keychain holder keeps your Presta to Schrader (AV to SV) adapter securely attached to your keys or bag, so it’s always ready when you need it. The actual adapter…
SUP compressor adapter for high flow, low pressure valve. It should be printed with PETG and 4-6 perimeters. Best printed on the side with supports. It's a low pressure valve adapter.
lost your cap while refilling your car aircon? just print one. This is the M8x1 R134a System Cap, 13 mm. Downside: The thread is along the layer lines but as there ist no pressure and just a dust cap it'll work.
