3819 modeli
Edit 27. 12. 2023 Now you can also print a napkin holder with these gnomes! https://www.printables.com/cs/model/695300-napnik-holder-with-gnome Edit 10. 12. 2023 Thank you so much for all the downloads! I was so happy for the first 100 in…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
Hello, Today I have a Door stop for you. It works well and holds doors or windows really well. Ideal when it is drafty. I used PLA/PETG Basic as the material No need to use supports If you are interested in my work, the links are here:…
Wydruk około 2,29 €–2,80 € nettoWstępna wycena jednego wariantu
A Nintendo Joycon grip with front-looking windows for the LEDs. It prints without supports and the LED windows face forward, so you can see them right as you normally hold the joycon. The LEDs shine into a slit that arrives to a 45º…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
This is my version of a Window Stop. It works very well :) Second Version is thicker: 7mm thick arms each side and rounded corner :) Print instructions I print it with 15% infill, PETG
Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A vent to mount onto a window with a 100mm air duct adaptor. It can either be ‘hung’ from an airing window, or placed horizontally in a standard window. The vent area is ~62 cm², which is close to the adaptor/hose area of ~65 cm² (worst…
Wydruk około 0,63 €–0,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tired of the wind slamming your PVC windows shut or swinging them wide open? This 3D Printed Window Keeper is a simple, highly functional wedge designed to sit securely near the hinge mechanism, keeping your window perfectly propped at a…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inspired from existing "Stoppy Stoppy" stopper available in the market.
Wydruk około 2,80 €–3,43 € nettoWstępna wycena jednego wariantu
I recommend checking out remixes made by @ Hanak1nSolo and @ fneb Both are great, and could be a better fit for your specific case! You can find them in Remixes tab window outlet size is 40mm x 200mm is has the same area as the input…
Wydruk około 6,24 €–7,62 € nettoWstępna wycena jednego wariantu
Sometimes you will lose or break a connector in your window blind chain. This simple project will fix it so you can enjoy a working blind chain again. It is designed for chains made of balls with diameter of 3,0-3,5mm.
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Cat & mouse door/window corner
Wydruk około 1,70 €–2,08 € nettoWstępna wycena jednego wariantu
Quick and easy print (~1hr), no supports. I designed this with the mindset that the Wyze Cam v3 has a nice ledge along the bottom that's perfect for ‘locking’ the camera in place if one installs it upside down. I printed the first 1mm in…
Wydruk około 0,94 €–1,14 € nettoWstępna wycena jednego wariantu
While I like the convenience of Twindos, I don't like that the cartridges are not fully emptied or even rinsed. (The machine is level, so I suspect a design flaw.) I also don't like the empty cartridges Miele sells for use with 3rd party…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
@Osfald's connector is cool but not strong enough for my use so I have connected two of them together. Let's see how long it will last :) Also because my chain balls are smaller (2.8mm), I have scale the connector down a little Printed…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bracket for attaching a movable window sill to a window. This allows the window to be opened without removing items from the window sill. A wooden board is required, which is screwed between the two bracket angles. The design was inspired…
Wydruk około 10,61 €–12,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Drainage cover for plastic windows and doors. First draft print (the included gcode) proved to be sufficient. The print using PLA is not as flexible as the original part, but it fits and looks good.
Wydruk około 0,60 €–0,74 € nettoWstępna wycena jednego wariantu
The original parts keep breaking… so I do replace them on demand. None of the printed parts broke yet ;)
Wydruk około 0,20 €–0,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
In my caravan, a Sprite Europe, de blinds are hold by 2 little holders. Some of them were broken, therefore I copied them in Fusion 360 and printed with Prusament PETG. Sliced in PrusaSlicer 2.6.6: 0.6 nozzle, 0.15 detail, brim, organic…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
When they insulated our panel house, they insulted us with one cover, so why not model it and print it out :).
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Idea While mounting the fly screen on a window, the idea for this spare parts arose: The profiles are constructed for windows up to 130 x 150 centimeters and are meant to be individually shortened. When mounting to a smaller windows, many…
Wydruk około 6,87 €–8,39 € nettoWstępna wycena jednego wariantu
Print from PETG, ABS or other heat resistant material. For this piece use clear see through filament because of the LED. Original switch part number: 61318365300.
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description Caravan window handle for old caravan. Distance between bolts is 28mm. Model contains of 4 parts of the handle, stop and otdoor cover. While printing Handle_base, insert pause at 4,4mm and insert M5 nut. Handle top has to be…
Wydruk około 1,77 €–2,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The original window caps rotted away so I printed new ones with petg. The legs are 16mm apart and 5mm thick.
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Background There are a lot of amazing and well thought through hose adapters for mobile air conditioners available, but these have quite long print times. I'm impatient and wanted something which is simpler, uses the available parts of my…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Easy print (~2hr), no supports. I designed this with the mindset that the Wyze Cam v2 has a nice ledge along the bottom that's perfect for ‘locking’ the camera in place if one installs it upside down. PLA 0.2mm layer height 0.4mm nozzle…
Wydruk około 1,37 €–1,68 € nettoWstępna wycena jednego wariantu
Print creepy haunted house and hang in a window to light it from the back. You can put transparent tape over the little windows and doors to add some color. Happy halloween!
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
Great original model by Whity . After printing the original version I decided to make a small modification. I moved the position of the upper suction cup mounts to allow for better viewing of the birds, and I made all the mounts a little…
Wydruk około 4,55 €–5,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Both knobs from handle of my car window have broken plastic that holds them in place and everytime i wanted to open or close window this knob detatch and stays in my hand after one turn. So to use the fact that i started learning some 3d…
Wydruk około 0,93 €–1,13 € nettoWstępna wycena jednego wariantu
A snowflake which can be attached to a window with a suction cup.
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
70x100x110 mm, um die Deko auf der Fensterbank zu erhöhen
Wydruk około 4,85 €–5,93 € nettoWstępna wycena jednego wariantu
Fresh air scoop for piper aircraft like Cherokee or similar. borrowed from thing verse.
Wydruk około 18,69 €–22,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Window handle repair set
Wydruk około 0,76 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Town token in Spirit Island board game.
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Window ventilation hole cover. Designed for original Vekra windows. Printed from PETG, but as it is designed for outdoor, ASA would be better.
Wydruk około 0,13 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
a simple fan duct designed for 120mm computer fans. This housing allows for ventilation through narrow slot type windows often found in high rise buildings. This is a great tool for removing smoke or fumes in a building with slot type…
Wydruk około 11,29 €–13,80 € nettoWstępna wycena jednego wariantu
The Window size should be the same as the bottom frame layer & should be able to hold it. Use petg for heat-resistance. I cut a hole in the wood a tiny bit smaller than the window, i measured the acrylic would fit in the frame of the 3d…
Wydruk około 6,52 €–7,97 € nettoWstępna wycena jednego wariantu
TwinDos Funnel for Miele Washing Machines Update 2025-11-11 I added a modified version: Actuator2 and funnel2. This design works better. We use a Miele washing machine and dryer, and really appreciate the convenience of the TwinDos…
Wydruk około 0,81 €–1,00 € nettoWstępna wycena jednego wariantu
The factory clips for holding the screen/blind together consistently fall-out. This clip is design to securely connect to the screen while allowing a quick disconnect to the screen. PETG, 0.3mm layer height works great. Not tested with…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple, single screw cleats for window pull cord. I filled the screw hole with color matched putty after installing. I needed two different heights for different mounting locations. Please share your Make:) Like the freebie? Feel free to…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
The holder is suitable for mounting a Lenovo T16 and a 16" monitor that can be folded back and forth on a shelf/window sill or table. The holder can be mounted on up to 21.5mm thick boards, tables or window sills (use the step file for…
Wydruk około 13,33 €–16,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
recommended printing on ASA filament, of course PLA or PETG is fine
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
The Easter decoration can be printed in a single color or, as in my example, in two colors. To achieve this, I paused the print before the final layers (the “Happy Easter” lettering) and changed the filament color. - Die Oster-Dekoration…
Wydruk około 2,41 €–2,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the cover for the lower hinge. You can find the matching cover for the upper hinge here . You may need to mirror it in the slicer, depending on whether the door is hinged on the left or right.
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Retrofit of window regulator 6205-25-016821P, used for WV / Audi. Printed mine in PTEG with supports, although the supports can be tricky to remove inside the small gap. Clips easily onto frame and was easy to mount correct. Included the…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Story: We have recently moved into a new apartment. It is a nice flat, but pretty old. The bedroom and living room have two rows of windows each. During the winter months a lot of humidity accumulates between those windows. In order to…
Wydruk około 11,47 €–14,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Side cover to the window roller blind
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
If you want to reuse Miele cartridges, drill 22mm hole and use this cork. Fill cartridge only to lower point of the hole. Use sealant, if hole isnt round. If you need custom sizes for cork, let me know.
Wydruk około 0,22 €–0,26 € nettoWstępna wycena jednego wariantu
A randomly generated geometric snowball ornament! The main body should be printed with support, mainly for the step at the opening and highest inside area. The window was printed in clear PETG on a small piece of glass from home-depot…
Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu
This is a paper clip with a rectangular hole for displaying the selection. I recommend printing the entire clip from PETG so that the clip is flexible enough, but you can also use other filaments. Size of the entire model: 17x10x1 mm (can…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holder for steel profile 15x15mm Material: ASA
Wydruk około 2,75 €–3,36 € nettoWstępna wycena jednego wariantu
This model is for the Aqara Door & Window Sensor (affiliate link), and helps you level the two pieces inline with any door or window trim. My door has a ½ inch trim that frames it, and makes it not possible to keep the two pieces of the…
Wydruk około 0,46 €–0,57 € nettoWstępna wycena jednego wariantu
modèle BE 171 modelisé
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
Easily add window screens to your louvered air vents to keep bugs out of your garden shed. Use PETG filament for outdoor use. No supports or brims. Print 2 frames. Apply outdoor rated 1" wide double stick tape to back side of frame. After…
Wydruk około 4,63 €–5,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Transform your windows into a scene from a horror movie with these eerie reaching hands! Watch as trick-or-treaters do a double-take when they spot these haunting silhouettes pressed against your glass, creating the unsettling illusion of…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
In the 3ds Game: “Tomodachi Life” when a Mii is in love this icon shows up in their window! I've made 2 other models so far which I've put into a collection so check that out! Also I have been using an Ender 3 Pro for this so I don't know…
Wydruk około 0,71 €–0,86 € nettoWstępna wycena jednego wariantu
I printed the prototype with PETG.
Wydruk około 0,42 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
We have several Velux windows in our house. There was a need for another stick to open these windows. The stick is adjustable in length. I created three settings, but you can vary. For this model you need to search in your hardware store…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
Dieser Fensteradapter ersetzt den herkömmlichen Deckel und die Batterie von Fibaro Door/Window Sensor 2 und ist eine überarbeitete Version des vorherigen Adapters, da die Batterien ER14250V 1/2AA immer so schnell leer sind. Die Kontakte…
Wydruk około 1,06 €–1,30 € nettoWstępna wycena jednego wariantu
side bracket for the lower rod on the window blind
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Zur Befestigung von Fensterdekorationen mit Abstand zur Fensterscheibe eignet sich dieser Haken. Der Haken wird durch eine Schnappverbindung in den Winkel eingesetzt und kann leicht entfernt werden, um z.B. das Reinigen des Fensters zu…
Wydruk około 0,95 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Zur Befestigung von Fensterdekorationen mit Abstand zur Fensterscheibe eignet sich dieser Haken. Die Ausladung beträgt ca. 80 mm. Die Befestigung erfolgt mit Powerstrips Large, die Fläche ist dafür 45 x 25 mm groß. Die nicht klebende…
Wydruk około 0,95 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
On my window the support was broken. I made a spare part to make it functional again.
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Improved (stronger) motor mount for Window Master WMU1200101. Among other things, the wall thickness has been increased by one millimeter to prevent the motor holder from breaking again. The holder consists of two parts (for better…
Wydruk około 0,05 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple model to support a plexiglass window of height 3 mm. Features a screw hole for Spax (self cutting, wood) 3x16. This is my first model, and the .stl can surely be optimized. However it was very helpful when making a…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I couldn't find a French window handgrip which uses screws to mount it. I use the original screws. Uses two screws with a diameter of 3 mm. Supports: Yes Printer: Creality Ender 3 Infill: 20% Filament: Aurapol PLA White
Wydruk około 2,29 €–2,80 € nettoWstępna wycena jednego wariantu
Zur Befestigung von Fensterdekorationen mit Abstand zur Fensterscheibe eignet sich dieser Haken. Der Haken wird durch eine Schnappverbindung in den Winkel eingesetzt und kann leicht entfernt werden, um z.B. das Reinigen des Fensters zu…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Check out rest of my Spring decorations here --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to purchase the design and…
Wydruk około 2,76 €–3,37 € nettoWstępna wycena jednego wariantu
I made this replacement flip-out window lock to replace the original flip latch locks that keep breaking over time. I thought someone else might like to use this model.
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I used Tinkercad to make this and I don't know if it works with all 3d printers or whatever you're using it for. Feel free to remix it I'm not a huge creator. Hope you have fun with it! -HardworkingDog (P.S. Sorry the image quality sucks…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
Good results printing in place on Core One with Overture PLA and default prusa slicer settings. The front of the object should be face down
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
This model is like the other one I have made but this time it's the problem icon! I've been using an Ender 3 Pro to print these (I know it's kinda old to some of you) so be cautious when you print this I'm guessing it'll work with other…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
This is from the the 3ds game “Tomodachi Life” where you take care of little Miis on a small island. Search it up. I hope you like this print I've been working on something big so ;) I've been using an Ender 3 Pro to print these so I'm…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Print in PLA or PETG, so far I printed in PTA but still need to see with time if it handles properly. I used infill 30% and supports
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
Window for firehouse for training kids
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
On the Nintendo 3ds there is a game called “Tomodachi Life” This window is from that game! As always the time and weight are approximate and also the g-code is not the best so make sure you slice it yourself. I have been using an Ender 3…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
Overview A functional replacement window latch / clip designed for vintage Avia trucks (frequently used in classic European fire trucks and utility vehicles). This part attaches to the side window mechanism to keep the window securely in…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
18 Snowflakes with approx. 50 x 50 x 2 mm for Christmas decoration. Put your favorite snow flakes on your window, gifts or decorate your Christmas table. 09.12.2025: Added two more snowflakes See also my original snowflake collection with…
EDIT 02.03.2026: Added an alternative version with grip grooves, which can provide improved grip in certain door and flooring combinations. The Flex-Hex-Hook is a compact, flexible door and window stopper optimized for TPU printing. The…
Can be used horizontically or vertically. works with 100mm tubes.
Update: anbei der Modellink zu thinkercad . Besonders in diesem Sommer hatte ich einige Update- und Remixanfragen zum Modell. Ich will das Modell mit euch teilen, fühlt euch frei es für eure Zwecke zu optimieren. Damit lässt sich die…
Use it to anchor a door or window in any position. It uses a clamp-like mechanism. Screw the bolt to make a friction with a perpendicular to the door surface. A door can still be fully closed with a mounted stopper on it. Just unscrew the…
Air conditioner exhaust into the ventilation window. Výdech klimatizace do okna ventilace. Category: Household
Air Scoop – Fresh Air for Cars Without A/C Stay cool on warm drives without air conditioning. This Air Scoop mounts securely to your partially open window and channels fresh outside air directly towards the driver. It uses a cap that…
Ventilation system for 3D printer. Easy to hook to the top of opened window and connect to 100mm aluminium hose. Works greatly with QIDI plus 4 printer. Suggestion is to remove inside filter in the chamber, connect 100mm aluminium hose to…
The model uses interlocking boards and a vent. The interlock is an angled dove tail that will provide a very tight seal (more air tight than the typical window seal kit). The interlocks are modeled with no clearance. You will likely need…
Window defrost dash vent VW passat b5/5.5 (golf IV), Audi B5/A4/A3 (8p1). Seat (leon/toledo),….. (only modeled, untested. Sorry) driver's side the passenger side must be mirrored Print instructions Unassociated tags: audi a3, b5.5, golf 4…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
Spare holder of the chain. For chain balls diameter 3mm. Print instructions Print Settings Printer Brand: Prusa Printer: i3 MK3 Supports: No Resolution: 0.15 Filament: Filament-PM PET-G
Eine kleine Hilfe um Fenster bei durchzug offen zu halten. Zur Aufbewahrung einfach am Henkel befestigen oder an einem Nagel aufhängen. Gedruckt habe ich den Fensterstopper in TPU damit er elastisch ist. A little help to keep windows open…
Update August 2026 Finally put down the time to improve on this design. I managed to increase the output surface area keeping in mind of the restrictions of my current window. The slot is the same height but now 20 cm wide. Please double…
DE (EN see below): Einfaches Klicksystem um 150mm Klimaschläuche an einer Durchführung im Fenster oder einer Tür zu befestigen. Funktioniert sowohl für harte PVC-Schläuche als auch weiche Soft-Schläuche (z.b. Kaltluft-Ansaugung). Das…
Window for a dollhouse Print instructions Kompletní okno je tvořené z 3 částí . 2x ram-vnitrni-venkovni.3mf a 1x okno-110x60.3mf . Pokud v doménu nechcete vnitřní díl stačí vám jen 1x od každého . Je to rozdělené kvůli snaží…
Simple window stopper that prevents unwanted windows closing.
Christmas Tree Window/Door Sign 2 Sign/decoration in the shape of a christmas tree for example, the door/front door or window. Dimensions: 132 x 170 x 4 mm --- Weihnachtsbaum-Fenster-/Türschild 2 Schild/Dekoration in Form eines…
A variation on my general commander deckbox design with but with a slot for a clear toploader. it will hold 100 double sleeved cards. Note: These parts have a nominal interlocking clearance of .10mm. This fit is intentionally a little…
A small and cute window feeder for small birds. You can always watch the birds from home thanks to the window mount. With 2 parts, you can customize the color of the feeder yourself as you like and this makes printing easy (no supports…
https://www.buymeacoffee.com/maxt ---------------------- 3D print with 5 different houses that can be placed in a window. You have the possibility to change the houses and rotate them in whatever way you please. The houses can also…
Ames Window is an optical illusion. When the window rotates around on a string, it appears to oscillate side to side. for more info on how it works check out the video below. I decided to make this after watching this Veritasium video: I…
This print is designed to be printed in two parts, one part either painted or printed in black filament, and then superglued together. I did this so I could print this on my single-filament printer, since I don't own multiple filament…
A bird feeder which is mounted to a window using suction cups. As you very likely don't have the exact same suction cups as I used, I also uploaded the Fusion 360 file. The required values can easily be changed with Fusions parameters…
This is inspired by the Window Decor created by MaxT . You can find the original window decors here: MaxT's Christmas Window Decor . My window silhouettes are the two houses with garages and the Christmas Tree with the Gazebo. Updated on…
![Air Duct Window Vent [r.4]](https://media.printables.com/media/prints/7b76bdf0-c1e5-4156-b510-bb3d0fd1fa5a/images/10171299_74288e78-5b67-42f2-bd07-d947e7bf40cc_5b25485a-2bff-4670-907c-d16bb9518486/air_duct_100mm_window_exhaust_-_duct_adaptor_2025-jul-06_05-16-24pm-000_customizedview14193478432.png)
