Wyniki wyszukiwania: wv

Sortowanie

123 modeli

P
Printablessblomfield

4" DWV to 4" Flexible Dust Collection Hose Adapter

This adapter converts 4" Drain/Waste/Vent PVC pipe to 4" flexible dust collection hose . My previous adapter was a two piece that needed to be epoxied together, which resulted in me seldom using it because I didn't want to break out the…

Pobrania
1122
Polubienia
136
Ocena
5
P
PrintablesNickFAdame

Humvee Card Model 1:100 Scale HMMWV High Mobility Multipurpose Wheeled Vehicle

This Humvee Model is in 1:100 Scale and replicates the look of a military Humvee. Its equipped with a 50 caliber machine gun. This model is ideal for use as a board game piece or tabletop model. Superglue may be required for assembly.…

Pobrania
850
Polubienia
147
Ocena
4
P
PrintablesNicG

4 inch (100mm) DWV PVC Pipe Bracket

I use 4 inch DWV PVC pipe to connect my various larger tools to my dust collector in my workshop and needed a bracket to be able to securely mount it to my walls and ceiling. This bracket securely fits around the pipe to hold it in place.…

Pobrania
629
Polubienia
57
Ocena
5
P
PrintablesAndi

Wandhalterung für Kärcher WV5 Fensterreiniger

Habe einen Halter gesucht, um den Fensterreiniger Kärcher WV5 platzsparend und stabil im Putzschrank unterzubringen. Die verfügbaren Halterungen haben mich nicht überzeugt, deshalb habe ich selbst einen Halter konstruiert. Gedruckt mit…

Pobrania
554
Polubienia
81
Ocena
5
P
PrintablesAnson Liu

West Virginia, USA (WV) Topographic Map with Rivers

West Virginia, USA (WV) Topographic Relief Map with Rivers and Coastal Waters West Virginia, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of…

Pobrania
527
Polubienia
47
Ocena
5
P
PrintablesJohn Tran

Vertical Garden Tower parts for 100mm PVC DWV pipe.

I designed a garden tower that would side on top of my 100mm siphon shroud in an aquaponics system. Complete 3d printed options would take too much filament and time and so I went with modifying a spare 65cm x 100mm (hole) PVC pipe…

Pobrania
434
Polubienia
97
Ocena
0
P
Printablesnroyer

Down Range - U.S. Army HMMWV (Humvee)

This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the U.S. Army HMMWV unit .…

Pobrania
289
Polubienia
34
Ocena
0
P
PrintablesJake Judisch

Dewalt Vacuum Hose to Dewalt DWV9000 Universal Connector

I purchased a Dewalt Wet/Dry Vacuum (DXV10S) and was disappointed to find that its hose did not fit to any of my Dewalt hand or stationary power tools including my electric sander (DWE6421) and electric planer (DCP580B) which require a…

Pobrania
249
Polubienia
56
Ocena
5
P
Printableshli

Kärcher WV5 / WV6 tool holder

The Kärcher WV5 7 WV6 holder at https://www.printables.com/model/109045-wandhalterung-fur-karcher-wv5-fensterreiniger is just for the cleaner itself. But the Plus / Premium version come with an additional spray bottle and a second suction…

Pobrania
233
Polubienia
31
Ocena
5
P
PrintablesTafulla

Meowmere (Filomiau) - StardewValley / Terraria

I designed a model of the "cat sword" from stardew valley and terraria items. The 3mf file opened as a project in prusaslicer have the stops for change the colors. You can scale the model for cosplays. Post your make+Press Like&Enjoy!…

Pobrania
214
Polubienia
30
Ocena
0
P
PrintablesJPN_FI

Kärcher WV6 Premium Window Vac Wall Mount

Kärcher WV 6 Premium Window Vac Wall Mount for the main unit and narrow nozzle. Category: Household Supplies

Pobrania
213
Polubienia
21
Ocena
5
P
Printablessblomfield

DWV PVC Pipe to 4" Hose

NOTE: This part is superseded by an updated adapter that prints as a single piece . I do not recommend you use this one for future needs. It works fine, but it's a pain to epoxy together. Two part adapter to convert DWV PVC Pipe to 4"…

Pobrania
191
Polubienia
34
Ocena
0
P
Printablesukwebb

Karcher WV2 Window Vac hangers

A simple hanger for the Karcher Window Vac Print Settings Printer: Wanhao i3 Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Generic PLA white Category: Household

Pobrania
174
Polubienia
18
Ocena
5
P
Printablesstritti

Kärcher WV50 Button

I had to do several prints until the stability was usable. Take *.3mf-file to find the position. Printer Settings Supports : Yes Brim: Yes

Pobrania
167
Polubienia
7
Ocena
4
P
PrintablesJonno12345

Shark WV200/WV251 Precision Attachment

Just a push fit attachment to give you a narrow aperture on the Sharks odd shaped handheld vacuum range, for getting into smaller area. Also included a particularly long one you can slice down to the size you want. No supports required.

Pobrania
148
Polubienia
5
Ocena
0
P
Printablesleonzz

SnowVi Snowboard and Ski Vise / Stand

A pair of vices for tuning and waxing. Works great for both snowboards and skis. 3 positions for board placement: horizontal, vertical and 30 degree; Elastic pads for board protection and added grip; Utility surfaces for clamping if…

Pobrania
146
Polubienia
31
Ocena
5
P
PrintablesJer

Plumbing Fitting - Cap - 1-1/2" - DWV/ABS/PVC

Cap fitting for 1-1/2" DWV pipe

Pobrania
140
Polubienia
11
Ocena
5
P
PrintablesMichael Gofman

DeWalt sander planer to WetDryVac to DWV9000 Quick Twist lock adapter

I have a number of DeWalt tools with dust extractor ports on them. I recently bought their Wet/Dry vac and was extremely disappointed that the provided hose, does not fit any of the DeWalt tools or even the special Twist Lock adapter that…

Pobrania
137
Polubienia
27
Ocena
0
P
Printablesnroyer

Down Range - USMC HMMWV

This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the USMC HMMWV unit . Three…

Pobrania
128
Polubienia
14
Ocena
5
P
Printablesglsf91

DeWalt vacuum hose adaptor airlock dwv9000

This is a vacuum hose adapter for DeWalt airlock systeem. On my DeWalt DWE315KT multitool it replaces the dwv9000-xj adaptor. Maybe it will fit also other DeWalt tools. It is for hose 32 mm. The diameter on the DeWalt adaptor on my…

Pobrania
118
Polubienia
11
Ocena
5
P
PrintablesJer
Pobrania
111
Polubienia
8
Ocena
0
P
PrintablesCargy

Karcher WV2 Squeegee Head Catch

So, the other day I was cheerfully cleaning my shower screen when, without warning, my head fell off!!!! This was, as you can imagine, slightly annoying! But I picked it straight up, and popped it back into place. However, a few seconds…

Pobrania
104
Polubienia
5
Ocena
4
P
PrintablesTeque5

WWVB Mount & Improved Hands for Modular Clock

Ain't got no time for quartz clocks. Get that WWVB goodness. Boblobs 's Modular Clock has a bunch of nice clock faces to choose from and is well thought out - it's just missing space for a better mechanism. Vitamins Remixed for HD-1688…

Pobrania
102
Polubienia
14
Ocena
5
P
PrintablesDurza

Collection of 2" and 3" PVC DWV fittings

This is a collection of 2" and 3" PVC DWV fittings I modeled while planning a bathroom reno. Mostly Charlotte Pipe from home depot. Some of the models aren't super pretty, but the hub locations are in the right spot relative to each other…

Pobrania
98
Polubienia
11
Ocena
0
P
Printableshjkl345

Shark WandVac WV200 Adapter for Vacuum Bags

Model is designed with a 2.2 mm wall, to fit 5x0.4mm lines. Material: PETG Line Width: 0.4mm Wall Lines: 3 → no infill Flow Rate: 110% on my Snapmaker printer, I needed a little more material, otherwise the walls would separate Print the…

Pobrania
93
Polubienia
15
Ocena
5
P
Printablesstritti

Kärcher WV2 Replacement Part

Printer Settings Supports : Yes

Pobrania
92
Polubienia
6
Ocena
3
P
PrintablesJames C. Foley

Left Hand Interior Door Handle HMMWV Canvas Door Handle

I did not create the original. I don't know who did. all I did was remix it to print without support. Print out of anything you want but remember that UV and Temp resistance for its use case would be important. Printed out of ASA. If you…

Pobrania
92
Polubienia
6
Ocena
0
P
PrintablesRobinson

WaveShare 5.5" amoled touchscreen WV16103 Case (not finalized)

Simple protection pour l'écran tactile WaveShare 5,5 pouces amoled (modèle WV16103), pour lequel je n'ai quasiment pas trouvé de modèle imprimable sur le net. Le but à terme est d'intégrer des pieds (ou un système d'accroche), ainsi qu'un…

Pobrania
91
Polubienia
8
Ocena
0
P
Printablesatchoom62

porte cles wv

porte cles

Pobrania
88
Polubienia
6
Ocena
0
P
PrintablesKelu

Dewalt Airlock (DWV9000) to Bosch vacuum adapter

This adapter works together with the Dewalt DWV9000 adapter in order to create a locked (but still rotatable!) connection between your Bosch AdvancedVac or UniversalVac vacuum cleaner and all of your Dewalt Airlock-compatible power tools.…

Pobrania
81
Polubienia
14
Ocena
5
P
PrintablesPropworks

WV Topography map (counties included)

a map/puzzle of West Virginia divided into the individual counties.

Pobrania
80
Polubienia
10
Ocena
0
P
PrintablesKwyn

DWV9000 to Festool Domino DF500 port

I have a lot of Dewalt tools and they all have a standard attachment compatible with DWV9000 quick connect vacuum adapter. Couldn't find one that attached to the domino so I designed one.

Pobrania
77
Polubienia
8
Ocena
0
P
Printablestinkertimber

4" DWV to 4" Powertec Blast Gate Adapter

Adapter that fits the female portion of a 4" sewer and drain Wye fitting to allow connecting a 4" Powertec (or similar) blast gate. Allows using PVC sewer and drain (DWV) for dust collection ducting. Print in PETG, 3 wall loops, and 20%…

Pobrania
77
Polubienia
8
Ocena
0
P
PrintablesJames C. Foley

Right Hand Interior Door Handle HMMWV Canvas Door Handle

I did not create the original. I don't know who did. all I did was remix it to print without support. Print out of anything you want but remember that UV and Temp resistance for its use case would be important. Printed out of ASA. If you…

Pobrania
77
Polubienia
8
Ocena
0
P
Printablesibrahim baş

99 model wv jant amblemi göbek

Yazdırırken ağaç desteği kullanmayınız normal destekle yazdırınız

Pobrania
76
Polubienia
2
Ocena
0
P
PrintablesBondFire

WV tire CAP

Car tunning, tires cup Printed on 0.2 leyer hight infill 100% PLA or PTGE optional----- you can change colors on first leyer

Pobrania
74
Polubienia
11
Ocena
0
P
PrintablesHzon 3D
Pobrania
74
Polubienia
13
Ocena
5
P
PrintablesNathanS

WVU LED Light W/Stand

Led light I designed with a stand

Pobrania
69
Polubienia
13
Ocena
5
P
PrintablesQuintin8

KARCHER WV2/WV5 Window vac fan motor impeller

The impeller on my Kircher wv2 broke and i made a new one. Its a 2 part assembly, glue is needed to attach the distance bottom rod to the impeller. I used Loctite to affix the impeller to the motor rod, super glue will probably work too :)

Pobrania
69
Polubienia
10
Ocena
0
P
PrintablesEllsworth Tech

Dewalt DWV9000 2.5 inch Adapter

I chose to print in PETG for additional durability and since I would be storing the adapter in my garage. Other than adding a brim for additional stability during printing, I used default settings for my 0.4mm nozzle which worked well for…

Pobrania
63
Polubienia
32
Ocena
5

wv logo keychain

model je velký 3x3cm

Pobrania
59
Polubienia
2
Ocena
0
P
Printablesc0deater

HMMWV Self Cancelling Turn Signal Arm

HMMWV/Humvee Self Cancelling Turn Signal Arm Pivot for those with Turn signals that are missing the flipper arm pivot. Printed on an LCD Resin printer out of ABS like resin, then used a brass tube brush to slowly ream center pivot hole…

Pobrania
56
Polubienia
4
Ocena
0
P
PrintablesYauhen Smaliuk

Ремонт ручки стеклоподъёмника WV Passat B3

Потерялась часть ручки стеклоподъёмника двери моего WV Passt B3, печатал остатками PET-G, сопло 0,4 заполнение 50% слоя 0,2, ручка с усилием садиться на своё место, но зато не вываливается и работает отлично,

Pobrania
50
Polubienia
6
Ocena
0
P
PrintablesChristian SU

Kärcher Fensterreiniger Set WV5 Premium

Wandhalter für das Kärcher Fensterreiniger-Set WV5 Premium bestehend aus: Wandhalter für den Kärcher Fenstersauer Wandhalter für die Sprayflasche Wandfalter für die kleine Düse Körbchen für das Netzteil, Anleitung etc.

Pobrania
50
Polubienia
3
Ocena
5
P
PrintablesSyllogy

WVR-6R Wolverine for Battletech | Syllogy

WVR-6R Wolverine for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files • wvr-6r3.stl…

Pobrania
49
Polubienia
3
Ocena
0
P
PrintablesFAVOS

Makita 5903R Dust Collection Port - with quick connect DWV900

Makita 5903R Dust Collection Port This 3D print file is designed to enable efficient dust collection on the Makita 5903R circular saw using a shop vacuum, in combination with the DeWalt DWV900 dust extraction quick connect. It's the…

Pobrania
45
Polubienia
14
Ocena
0
P
PrintablesNeil

Shark Deluxe WandVac 2.0 (WV270UKDB) 32mm head adapter

The default brush on the Shark Deluxe WandVac 2.0 is poor, so this adapter will let you fit a "standard" 32mm inner brush head. My make photo was a v1 to get the dimensions correct for the tolerances of my printer, so your milage may…

Pobrania
41
Polubienia
3
Ocena
0
P
PrintablesDr156

Leifheit WindowVac wall holder

Since there was no wall holder with this Window vacumcleaner, I modified an existing model to fit the Leifheit.

Pobrania
40
Polubienia
2
Ocena
5
P
PrintablesVirtualmisterl

80mm Round Fan Grille With Yawvr Logo

This is an 80mm round fan grille/cover with the Yawvr Logo on it. after i modded my yawvr base to retrofit arctic f8 fans to help with cooling, i created these covers for the exit fans on the back of the yawvr base. i did not add any…

Pobrania
36
Polubienia
4
Ocena
0
P
PrintablesItsVRK

YawVR X56 HOTAS mounts

Prints without supports, I used 2 processes so that the Joystick platform would be nice and strong: Joystick platform 70% infill Mounting Arm: 25% infill To mount X56 Joystick and Thruster to these platforms you will need 8* M5x60mm…

Pobrania
36
Polubienia
4
Ocena
0
P

pi pico wv 1.3 lcd case

added a front panel as it was missing in the original model

Pobrania
34
Polubienia
0
Ocena
0
P
Printablesksanislo

Formuling Steering Wheel Center Cap for WV

This is a center cap for a Formuling steering wheel with a 78mm hole and approximately 5mm plate thickness. It features a 1970 VW logo, which can be printed in a second color if desired. TPU is recommended, otherwise you may not be able…

Pobrania
34
Polubienia
2
Ocena
0
P
PrintablesKlaus

Karcher WV classic Drainplug

For a Kärcher WV Classic. Partnumber 6.38.31.03-0 It's a quick and simple part with TPU. Don't forget to activate the partcooler.

Pobrania
33
Polubienia
4
Ocena
0
P
Printablesrolfy

4" DWV Sleeve to 4" flexible dust hose adapter

This adapter converts 4" Drain/Waste/Vent PVC pipe sleeve to 4" flexible dust collection hose . Initially I had used this model but my pipe end was a sleeve end, and it seemed silly to cut a 40mm piece of pipe to pad out the sleeve, so I…

Pobrania
32
Polubienia
2
Ocena
0
P
PrintablesPaul Corbett

Screwverse GoPro adapter

End effector for the https://www.printables.com/model/812639-screwiverse-articulated-arm for attaching

Pobrania
32
Polubienia
5
Ocena
0
P
PrintablesSyllogy

WVR-6M Wolverine for Battletech | Syllogy

WVR-6M Wolverine for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files • wvr-6m4.stl…

Pobrania
31
Polubienia
2
Ocena
0
P
PrintablesItsVRK

YawVR VKB Gladiator NXT mount

YawVR VKB Gladiator NXT mount, print fairly solid, you will need to drill new holes in the rim of the YawVR bowl. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament:…

Pobrania
31
Polubienia
4
Ocena
0
P
PrintablesLCplBacon

Kärcher WV1 window cleaner adaper

I wanted to use the accessory of my Kärcher WV1 window cleaner without the cleaning pad in the middle. The adapter screws firmly onto the bottle. The sprayer head screws on top of the adapter. Under normal use, the adapter stays connected…

Pobrania
29
Polubienia
2
Ocena
5
P
PrintablesMike1950

Wandhalterung für Kärcher WV75

Eine einfache Wandhalterung für den Fensterabzieher von Kärche Modell WV75.

Pobrania
27
Polubienia
1
Ocena
0
P
Printableswilder

2" dwv inside pipe screen

I use this as a inside pipe screen will need to adhesive in. adjust by %1 scale if off.

Pobrania
23
Polubienia
4
Ocena
0
P
PrintablesSkomir

WV Caddy - Držák plata kufru

plastové držáky na výklopné pevné plato v kufru WV Caddy, už 2 roky funkční. kresleno ve Fusion 360 tisk PET-G

Pobrania
23
Polubienia
1
Ocena
0
P
PrintablesM.C. 3Design

4M1823533 SPINA BLOCCO LEVA APRI COFANO WV AUDI PORSCHE

SPINA DI BLOCCAGGIO LEVA APRI COFANO ANTERIORE COMPATIBILE CON AUDI PORSCHE E WV VERSIONE SEMPLIFICATA DA STAMPARE IN PETG RIEMPIMENTO 100% <<<<IN FOTO IL COMPONENTE NERO è QUELLO UGUALE ALL'ORIGINALE>>>> QUESTA VERSIONE è PIù SEMPLICE E…

Pobrania
22
Polubienia
4
Ocena
0
P
PrintablesHypergiggle

HMMWV

Made with Copilot Labs Category: 3D Printing Tests

Pobrania
22
Polubienia
7
Ocena
0
P
PrintablesAferac

Garage Remote Control Housing - Beninca TO.GO-WV

Remote Control Housing for the Beninca TO.GO-WV Version 2; I simplified and cleaned up the model a little. Printed using Neon green and matte black PLA, 0.2mm layer height and 20% infill. Version 1; Printed using transparent PLA, 0.2mm…

Pobrania
21
Polubienia
0
Ocena
0
P
Printablesavb

12V Motorbike mount (WVA9, GSF 1200 Bandit) V2

A much sturdier version with holding arms on both sides. Attach with a M8 bolt to the frame piece holding the cockpit. The socket I used is this: http://www.louis.de/index.php?topic=artnr_gr&artnr_gr=10032936 Category: Automotive

Pobrania
21
Polubienia
3
Ocena
0
P
PrintablesMuad' Dib

Dunbar WV Middle School Thor Hammer

Dunbar WV Middle School Thor Hammer. Remix changes to add more weight, easier printing on smaller printers, and just little cleanups here and there.

Pobrania
19
Polubienia
5
Ocena
0
P
PrintablesEttienne M

WV5 wall bracket, with plug clip

Added a clip to hold the charger plug when the window cleaner is not in the bracket.

Pobrania
19
Polubienia
1
Ocena
0
P
PrintablesDan

Lululemon Mirror Driver Board Mount (LM40SAMFHD700AG25WV)

A PCB mount for the LM40SAMFHD700AG25WV driver board used in one of the Lululemon Mirrors. Its a press fit but still has holes for mounting the PCB with hardware. The following hardware I used: 4x M3x4.2 Heatset Inserts (However better…

Pobrania
18
Polubienia
2
Ocena
0
P
Printablescamdotcam

Drain Grille shower floor waste DWV DN50

I made a floor waste grate for my bathroom/shower. I didn't want a large recessed panel for the grille, and as I polished the floor by hand there wasn't a good way to have a inset plate that was level with the surrounding floor. Photos…

Pobrania
18
Polubienia
1
Ocena
0
P
Printablesjames23

Downspout adapter - 2x3" to 3" S&D/DWV

An adapter from a 2x3" rectangular downspout to a 3" DWV/S&D (Sewer and drain) pipe. This being the USA, a "2x3" downspout is 2.25" by 3.25" and a 3" S&D pipe is really 3.25" in diameter. Includes FreeCAD model, .stl file and .3mf file…

Pobrania
17
Polubienia
3
Ocena
0
P
PrintablesItsVRK

YawVR VKB Gladiator NXT Mount - Angled

Angled VKB Gladiator NXT mount for Yaw VR, designed to be glued to a Peripheral Mount Base https://www.thingiverse.com/thing:4601501 Print with top of mount down, reccommend 70% fill for mount plate, 20% fill for the rest. Category: Video…

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesVirtualmisterl

Yawvr center mount adjustable locking mechanism

This is a multi position adjuster for the center stand wheel/yoke holder on the yawvr motion simulator. It will lock the stand in position stopping it from hinging back & forth making it much more solid than the default solution which has…

Pobrania
16
Polubienia
3
Ocena
0
P
Printablesrichspencer71

Charleston WV City Silhouette

Print the letters, silhouette, dome and base separate for best results. No support required. Base includes points for letter placement. I made the dome separate so it can be printed a different color, which should be copper!

Pobrania
15
Polubienia
3
Ocena
0
P
Printablesibrahim baş

1999 model wv polo yan sanayi dispratör sensör kablo tutucusu

orjinal olandispratöre uygun değildir ve ısı dayanımı için pc filament ile basılmalıdır

Pobrania
15
Polubienia
1
Ocena
0
P
Printablesali1234
Pobrania
15
Polubienia
2
Ocena
0
P
PrintablesTraunwolf

Ölfinne SV650 WVBY (WIP)

Schlauchhalter Hinterrad für Kettenöler, work in progress

Pobrania
15
Polubienia
1
Ocena
0
P
Printablesrookieprinter

WV Beetle Perspective Wall Art

" Cambered Beetle Perspective " is a 3D-printed wall art piece that brings a twist of humor and vintage vibes to any space! Featuring the iconic VW Beetle with a cambered stance and a cheeky "Why So Negative?" message, this design is…

Pobrania
14
Polubienia
3
Ocena
0
P
PrintablesDeeDee

Decorating template WV

Decorating template

Pobrania
13
Polubienia
5
Ocena
0

YA-WV-V0.8

Encoder-Based Wind Vane This wind vane achieves a directional resolution of 22.5° using optical encoder disks . The optical sensors (fork-type couplers) are reclaimed from discarded or defective inkjet printers. The primary objective of…

Pobrania
13
Polubienia
0
Ocena
0
P
PrintablesItsVRK

YawVR Battery Box

Full instructions at https://youtu.be/neCHO7eWlt8 Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Video Games

Pobrania
13
Polubienia
0
Ocena
0
P
PrintablesTangled

CrowView Note Pi Zero sled

Kinda disappointed that they only have a couple of their bridges. I do a LOT of zero projects, so I made my own. I'm just going to leave a PiZ2 on there to set up all my Zeros. (that way I can do a 64 or 32bit OS. And 64bit really isn't…

Pobrania
12
Polubienia
2
Ocena
0
P
PrintablesThomas

WVC-600 AC Plug (use on your own risk)

My WVC-600 came without the cable I ordered but I didn't want to wait so I made one. I used 3mm steel dowel pins I had laying around and soldered on a 3x1.5mm² power cable and insulated with heat shrink. yellow tape for additional…

Pobrania
12
Polubienia
2
Ocena
0
P
PrintablesItsVRK

YawVR Central Holder Brace

The central holder on the YawVR is prone to forward and backward movement when used with a racing wheel, this brace makes it extremely solid. Category: Video Games

Pobrania
12
Polubienia
0
Ocena
0
P
PrintablesItsVRK

YawVR Dome Rim 1/8th Section

This is to ease the process of designing mounts for peripherals, enjoy Note that the bottom of this part is actually the top of the rim. Category: Video Games

Pobrania
12
Polubienia
0
Ocena
0
P
PrintablesHypergiggle

HMMWV

Made with Copilot Labs Category: 3D Printing Tests

Pobrania
11
Polubienia
1
Ocena
4
P
PrintablesItsVRK

Peripheral Mount Base for YawVR Dome Rim

2020-10-03: Updated with better holding capability and screw hole for locking in place. You can use this STL to create peripheral mounts that have a friction fit and can slide the rim of the YawVR dome. It is my intention that you could…

Pobrania
10
Polubienia
0
Ocena
0
P
PrintablesHypergiggle

HMMWV

Made with Copilot Labs Category: 3D Printing Tests

Pobrania
9
Polubienia
3
Ocena
0
P
PrintablesJellyTitan

4 in. x 1-1/2 in. Spigot Hub Flush Bushing for PVC DWV

This bushing allows the insertion of the 1-1/2 pipe into the 4" pipe. The connection is intentionally not glued so that if the 4" in-ground pipe shifts or freezes, the drain waste pipe connection can move up or down. I needed to connect a…

Pobrania
9
Polubienia
1
Ocena
0
P

WV8T Antenna Isolator

Been looking for an Isolator that could be used with extra wire for adding or removing length for tuning. Added extra holes for that and for added strain relief. Made the hole at the top large enough for a S clip for hanging.

Pobrania
9
Polubienia
0
Ocena
0
P
Printablesgbombadon

Bracket for Karcher WV2 window vac

Bracket to store all the bits for the WV2. Designed in 3 parts for easy printing and assembly. Includes a couple of washers if using countersink 8g screws. I've used 3M command strips to attach it in the end. Supports - could probably get…

Pobrania
9
Polubienia
2
Ocena
5
P
Printablesleonzz

SnowVi HUD Adapter for Helmet (Patent Pending)

An adapter that converts your existing smart watch into a heads up display and mounts to a helmet. Patent pending. Open model from snowvi.com for personal use only. It has a GoPro-style mounting finger that can be attached to a helmet…

Pobrania
6
Polubienia
3
Ocena
0
P
PrintablesWVRPS

WVRPS Nayomi Bust

This is a bust of the iconic character of WVRPS with the trait “Nayomi”. is now available for 3D printing. 📜 License Notice All WVRPS 3D models (STL files) are released under the Creative Commons Attribution – NonCommercial – ShareAlike…

Pobrania
5
Polubienia
0
Ocena
0
P
Printablesleonzz

SnowVi HUD Watch Case for Apple Watch 42mm

This is only a part of the SnowVi heads-up display (HUD) system that converts smart watch into HUD. For other parts, please refer to the HUD adapter main models: helmet mounted version goggle mounted version Refer to the provided…

Pobrania
5
Polubienia
0
Ocena
0
P
Printablesleonzz

SnowVi HUD Adapter for Snow Goggle (Patent Pending)

An adapter that converts your existing smart watch into a heads up display and mounts to a snow goggle. Patent pending. Open model from snowvi.com for personal use only. It has a mount plate that clips to your goggle’s strap, which the…

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesSpit

inserts for WV Passat reinforced boot trim

Sugest printing with ASA, or ABS for UV resistance.

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesNikkio

Dewalt oval sander to DWV9000 adapter

Model is designed to print with no supports needed. I printed this out in PETG for additional impact resistance but any reasonably durable material should suffice. Onshape project can be found here , built with the help of the amazing…

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesStanislav

WV krabička na klíčenku

krabička na přívěšky od wv

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesAustin Pauley
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
4
Polubienia
4
Ocena
0
P
Printablesleonzz

SnowVi HUD Watch Case for Fitbit Sense or Versa

This is only a part of the SnowVi heads-up display (HUD) system that converts smart watch into HUD. For other parts, please refer to the HUD adapter main models: helmet mounted version goggle mounted version Refer to the provided…

Pobrania
4
Polubienia
0
Ocena
0
P
Printablesnanoamp

Kärcher WV5 window vac head wall mount

Kärcher WV5 window vac has interchangeable heads. I printed a wall mount for the vac ( https://www.printables.com/model/1286049-wv5-wall-bracket-with-plug-clip ) and fitting this model with a 135mm gap allows the spare head to sit neatly…

Pobrania
4
Polubienia
0
Ocena
0