Wyniki wyszukiwania: xtruder

Sortowanie

5741 modeli

P
Printablesteookie

Delta-P fan duct V2-R2 for MK3S(+) extruder

July 27 2022 house keeping note: Somehow, reviews and makes for the older version of this fan duct have been showing up on this page, and reviews and makes for this updated version were showing up on the old versions page as well. To…

Wydruk około 2,01 €–2,46 € nettoWstępna wycena jednego wariantu

Pobrania
10 279
Polubienia
1934
Ocena
4,87
P
PrintablesCUBE3DWORLD

Mega Extruder Rotation Visualizer Bundle

Inspired by Mikolas Zuza Link: https://www.prusaprinters.org/prints/10-extruder-rotation-vizualizer What you need: Super Glue 8x3mm Neodymium Magnet 3D printed Visualizer Montage: Just glue the magnet correctly in the center of the circle…

Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu

Pobrania
8420
Polubienia
2458
Ocena
4,84
P
PrintablesPrusa Research

Extruder linearity correction calibration tower

This object can be used to calibrate linearity correction factor for extruder motor. More info in https://help.prusa3d.com/en/article/extruder-linearity-correction-calibration_2254 Print instructions Print with PLA

Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu

Pobrania
8347
Polubienia
686
Ocena
4,88
P
PrintablesMikolas Zuza

Extruder rotation vizualizer

Extruder movements on both MK2/S and MK3 can be quite difficult to see. The other three axes are easily visible, and honestly, it can be super mesmerizing to watch. A lot of us always want to know what’s our printer doing. Peter…

Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu

Pobrania
6427
Polubienia
1162
Ocena
4,95
P
PrintablesRossero

Single Extruder - TRIPLE Color - Sleepy Cat

(for Bambu, check below) Please like, share, download and all the amazing good stuff! Since this is my final model in my "Single Extruder - Dual Color" series where I managed to put 3 colors together into one model! Not counting the…

Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu

Pobrania
4715
Polubienia
2487
Ocena
4,91
P
PrintablesJoe Paradise

Single Extruder - Dual Color - Panda

Size: 55mm x 69mm x 43mm Filaments: PLA Jet Black (black) and PLA Vanila White (white) Note: Some parts of the model may need to be glued. Organic support recommended.

Wydruk około 1,18 €–1,45 € nettoWstępna wycena jednego wariantu

Pobrania
4577
Polubienia
875
Ocena
4,94
P
PrintablesJoe Paradise

Single Extruder - Dual Color - Fox

Size: 61mm x 47mm x 42mm Filaments: PLA Prusa Orange (orange) and PLA Vanila White (white) Note: All parts need to be glued.

Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu

Pobrania
4430
Polubienia
1457
Ocena
4,93
P
PrintablesKalleKnall

Prusa MK3 / MK3S / MK3S+ X-Axis Linear Rail Guide Upgrade - updated (Bondtech Extruder) / MK3S+ Tensioner

THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…

Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
3252
Polubienia
630
Ocena
4,98
P
PrintablesJD

Pokemon Snorlax Single Extruder - Dual Color

I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest models:…

Wydruk około 2,13 €–2,61 € nettoWstępna wycena jednego wariantu

Pobrania
2303
Polubienia
634
Ocena
4,67
P
Printablesjb

5015 adapter for Sovol SV06 extruder

UPDATE: Version 3 included with better tuned dimensions and fixes based on feedback. UPDATED UPDATE: Thanks to Crosslink for featuring this in his video!! The extruder on the SV06 can get quite hot, due to the weak stock fan, especially…

Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1995
Polubienia
158
Ocena
4,92
P
PrintablesLegufix

MK4 Nextruder nozzle change tool

Because changing nozzles with the supplied multi-tool was too wobbly for me, I developed a simple tool to hold the hotend more stable. As can be seen in the CAD image in cross-section, the tool is designed in such a way that the hotend…

Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1958
Polubienia
372
Ocena
4,94
P
PrintablesClement

Hypnotic Extruder Visualizer - Kinetic Art - Optical Illusion - Mandala

Update : there is now a version that can be mounted on the X carriage of the Prusa Mini :) Hi !! I'm a jeweler and use my beloved prusa MK3s to design invented custom tools for my craft. The visualizer challenge, encouraged me to create…

Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu

Pobrania
1711
Polubienia
737
Ocena
4,82
P
PrintablesIan Rich

Prusa Extruder Rotation Visualizer Turbine

All design credit goes to ZekeAsakura https://www.thingiverse.com/thing:2900552 I remixed it as follows: Reduced the diameter to +/- 40mm Trimmed the height to +/- 10mm Recessed a small hole to make it easier to glue in a 8mmx3mm magnet…

Wydruk około 0,61 €–0,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1049
Polubienia
96
Ocena
4,78
P
PrintablesJohnM

Prusa i3 Mk3 reverse Bowden extruder PTFE connector

This print allows the use of a Bowden tube direct to the extruder when printing hygroscopic filaments. The top is threaded to accept a PC4 M10 fitting (which is actually a 1/8 BSP thread). This fitting has a larger hole inside, so it…

Wydruk około 0,32 €–0,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
957
Polubienia
115
Ocena
5
P
Printablesteookie

Delta-P fan duct V2-R2 for BEAR extruder

This is version 2 (V2) of the Delta-P fan duct for BEAR. It has several updates compared to the original: Easier to print Better cooling Refined flow path CFD optimized Even cooling front to back and left to right Improved visibility of…

Wydruk około 1,29 €–1,58 € nettoWstępna wycena jednego wariantu

Pobrania
952
Polubienia
131
Ocena
4,96
P
PrintablesJoe Paradise

Single Extruder - Dual Color - Modern Vase

Two types of Modern Vases Size: 99mm x 99mm x 135mm Filaments: PLA Jet Black (Outer) and PLA Blend Viva La Bronze (Inner)

Wydruk około 1,98 €–2,42 € nettoWstępna wycena jednego wariantu

Pobrania
836
Polubienia
245
Ocena
5
P
PrintablesKLM

Minimalistic Extruder Rotation indicator

This was designed to be used with a cylindrical magnet (8mm diameter by 10mm long) This is a press fit, no glue is required... Print instructions 200 microns works fine !

Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu

Pobrania
832
Polubienia
87
Ocena
4,78
P
PrintablesPetclaud

Prusa i3 MK3S Noctua Extruder fan cover

The first Prusa MK3's were shipped with Noctua fans with hideous colors. Hence I made a cover for the Noctua fan as found here: https://www.thingiverse.com/thing:2730049 When Prusa released the new MK3S parts, some modifications to the…

Wydruk około 1,43 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
679
Polubienia
78
Ocena
4,63
P
PrintablesKevin Barker

Gridfinity Bin for Prusa Nextruder Nozzles

There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…

Wydruk około 4,77 €–5,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
567
Polubienia
146
Ocena
5
P
Printables3DyPrinterGuy

Prusa Mini BondTech Extruder Bełt Tension Meter

Literally just took the original Prusa Mini gcode file and in text editor changed the M92 line to M92 E415 in order to print well with a BondTech Extruder. Thanks to JamesHZ (https://www.printables.com/social/116023-jamehz/about) for…

Wydruk około 0,86 €–1,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
433
Polubienia
57
Ocena
4,83
P
PrintablesRo3Deee

Nextruder Main Plate load cell protection - no supports (Prusa XL, Prusa Core One, Prusa MK4)

As stated by the original project here : Sometimes the filament gets stuck between the stepper motor and the drive gear of the nextruder. This design closes the gap between the stepper motor and the drive gear, thus limiting this source…

Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
380
Polubienia
53
Ocena
4,75
P
PrintablesUNIT3D

Extruder Rotation Visualizer Radioactive

Just another Extruder Rotation Visualizer "Radioactive" Follow the Instructions here: https://blog.prusaprinters.org/visualize-extruder-motor-movements_7392/

Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
334
Polubienia
38
Ocena
5
P
PrintablesCUBE3DWORLD

Extruder Rotation Visualizer Collection

How-To Print: Recommended layer height: 0.10 mm Color Change (Please see the tutorial below) Support: No needed Let the Visualizer cool down slowly on the printing plate to avoid being bent. How-To Change Filament Color: Montage: Just…

Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu

Pobrania
301
Polubienia
62
Ocena
4,67
P
PrintablesJoe Paradise

Single Extruder - Dual Color - Turtle

Size: 63mm x 49mm x 20mm Filaments: PLA Blend Viva La Bronze (gold) and PLA Mystic Brown (brown) Note: Need to be glued.

Wydruk około 1,38 €–1,68 € nettoWstępna wycena jednego wariantu

Pobrania
299
Polubienia
102
Ocena
0
P
Printableslecter

Silly Walks - Extruder rotation visualizer

This is an Extruder Visualizer based on the epic John Cleese character from the Ministry of Silly Walks sketch by Monty Python. Check out https://www.prusaprinters.org/visualize-extruder-motor-movements/ for more info on how to use it. I…

Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
263
Polubienia
58
Ocena
4,83
P
PrintablesJLTX

Easy MMU3 Purge Calibration Tool for MK4 and other Nextruder models

This print is only 40 minutes, uses only about 1.5g of each filament. The layout matches the purge matrix so you can easily enter your values after eyeballing the clean point. You will get cleaner prints and probably save a lot of…

Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu

Pobrania
258
Polubienia
98
Ocena
5
P
PrintablesBdaboy

Prusa Mini Filament Sensor Arm for BondTech extruder

Allow Top loading of filament when using the BondTech Extruder. To make this work you will need a M3 x 50mm screw and hex nut. That was the hardest part as finding anything that long took some time. This is the arm only so you will need…

Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
257
Polubienia
59
Ocena
5
P
PrintablesJoe Paradise

Single Extruder - Dual Color - Pony / Horse

Size: 82mm x 52mm x 41mm Filaments: PLA Mystic Brown (brown) and PLA Vanila White (white) Note: All parts need to be glued.

Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu

Pobrania
188
Polubienia
42
Ocena
5

Ender 3 V3 SE Extruder Rotor Visualizer

This lightweight rotor-style visualizer mounts onto the shaft of the Ender 3 V3 SE's silver extruder stepper motor. Designed for effortless visual monitoring, it rotates as the extruder motor turns, clearly indicating direction and speed…

Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu

Pobrania
187
Polubienia
22
Ocena
3,33
P
PrintablesOxma 3d

Extruder visualizer mendel i2 style

Extruder visualizer Prusa mendel i2 style. No glue, No support\ It needs 3 magnets (8x3mm) to work.

Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu

Pobrania
177
Polubienia
26
Ocena
4,8
P
PrintablesPeter Main

Nextruder Nozzle Holder / Extruder Identification Label

These holders hang from the XL's side extrusions to store your extra Nextruder nozzles. When the nozzle is in an extruder, the holder becomes a label that clips on to the extruder to remind you which nozzle is currently in use. The .3mf…

Wydruk około 3,74 €–4,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
163
Polubienia
59
Ocena
4,63
P
Printablesserialx

iOS Settings Extruder Rotation Visualizer

This is an extruder rotation visualizer in the theme of iOS settings icon for NEMA 17 motors on the Original Prusa i3. This is a remix of Extruder Visualizer from GerryPB . Video Clip Remix Changes Made the printing and assembly more…

Wydruk około 0,42 €–0,52 € nettoWstępna wycena jednego wariantu

Pobrania
154
Polubienia
66
Ocena
4,63
P
PrintablesJoe Paradise

Single Extruder - Dual Color - Kitten

Size: 70mm x 49mm x 38mm Filaments: PLA Galaxy Black (black) and PLA Vanila White (white) Note: Parts need to be glued.

Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu

Pobrania
142
Polubienia
36
Ocena
5
P
PrintablesDanAndersen

DanAnd's Mount for E3D Revo Micro, Sherpa-Mini, Creality Ender3, CR10 or Sunlu S8. Bowden-Setup and Direct-Extruder possible

Mounting a E3D Revo Micro on Creality Ender 3 , CR10 , Sunlu S8 and many more printers. Bowden-Setup and Direct-Extruder with Annex Engineering Sherpa Mini ! Silent Setup with 5015 Blower and 40x40 axial Fans. Detailed build instruction…

Wydruk około 4,02 €–4,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
122
Polubienia
21
Ocena
5
P
PrintablesKageve

Mk4 Nextruder Hotend Assembly Box (MMM option avalible)

A simple two-piece box that stores a full Mk4 Nextruder hot-end assembly (Heater, Thermistor, Heaterblock, Mk4 Nozzle or v6 adapter+v6 nozzle) as well as one to three v6 nozzles. It has a few small features on both short ends to allow it…

Wydruk około 1,96 €–2,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
119
Polubienia
26
Ocena
4,67
P
PrintablesJoe Paradise

Single Extruder - Dual Color - Dragon

Size: 65mm x 71mm x 41mm Filaments: PLA Blend Viva La Bronze and PLA Lipstick Red Note: All parts need to be glued.

Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu

Pobrania
118
Polubienia
36
Ocena
5
P

KLP1 EXTRUDER COVER ''BLACK''

EXTRUDER COVER FOR KINGROON KLP1 210 My print is printed from Graphene PET Printed on 3 perimeters, filling 40% with a wall height of 0.15mm. Supports are not needed I recommend printing from ABS, ASA, PET material. Enjoy

Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
106
Polubienia
10
Ocena
5
P
PrintablesJoe Paradise

Single Extruder - Dual Color - Zebra

Size: 82mm x 52mm x 41mm Filaments: PLA Jet Black (black) and PLA Vanila White (white) Note: All parts need to be glued.

Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu

Pobrania
101
Polubienia
24
Ocena
0
P
Printablesperoteq

FFCP Single Extruder Printhead Mods Flashforge Creator Pro

These are the all the parts I use to lighten the printhead of the FFCP, improve cooling and cable management for single extruder use. Needed hardware: 6 x short M3 heatset insert (CNC Kitchen) Optional: 2nd cooling fan + 2 x M3 heatset…

Wydruk około 5,96 €–7,28 € nettoWstępna wycena jednego wariantu

Pobrania
100
Polubienia
18
Ocena
0
P
PrintablesDroneGirl

Extruder Motor Rotation Indicator

As if Prusa printers aren't already mesmerising enough to watch. By adding a Motor Rotation Indicator, you've got no reason to spend countless more hours watching it turn! Oh, well, that's what I do anyway! Love em! Here's my Hourglass…

Wydruk około 0,30 €–0,36 € nettoWstępna wycena jednego wariantu

Pobrania
99
Polubienia
8
Ocena
5
P
PrintablesElyse

Money Box or pencil cup Impossible passthrough - Single Extruder, Dual Color

Overview Inspired by the "dual color, one-extruder" contest, I designed this model in Fusion 360 with a fun passthrough mounting. You can use this model as money box or pencil cup : as you want ! Printing Printed with 0,4 nozzle, 0,2 mm…

Wydruk około 7,35 €–8,98 € nettoWstępna wycena jednego wariantu

Pobrania
96
Polubienia
24
Ocena
0
P
PrintablesMazze

Santa Claus multiple colors on a single layer with a single-extruder 3D printer / babbo natale stampa inversa multicolor

Segnaposto che diventa una decorazione per albero di natale (è presente un foro per far passare un gancetto o un filo sottile ed appendere all'albero di natale) realizzata con stampante 3d a singolo ugello mediante stampa inversa. Per…

Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu

Pobrania
85
Polubienia
21
Ocena
0
P
PrintablesT_K

Prusa MK4, Nextruder nozzle box

I needed a safer storage for my spare nozzles so i made this to replace the plastic bag the spare nozzle came in. This is for a single nozzle which i prefer over boxes with multiple nozzles in my sparepart kit. Easy print, text can also…

Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu

Pobrania
78
Polubienia
10
Ocena
5
P

Wu Tang Clan Extruder Visualizer

The Wu letting you know you rollin! Protect ya neck with this killer bee of an add-on. I printed it from Matter3D Basics sun yellow PLA: https://www.matter3d.com/products/basics-series-pla?variant=42420619772081 0.40mm nozzle 0.15mm layer…

Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu

Pobrania
69
Polubienia
24
Ocena
4,67
P
PrintablesFox Hunter 12

Extruder Rotations Template/Gantry Neptune 4

I build this gantry to check the righ Extruder Rotation in your printer

Wydruk około 2,18 €–2,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
65
Polubienia
11
Ocena
5
P
Printablesecsv

QIDI X-Max (2022) Extruder Carriage Mounted Dial Indicator Holder

The Carriage Mounted Dial Indicator Holder for the Qidi X-Max is an excellent design by humebeam . It can be used with the original carriage by Qidi. Only the cover, ribbon cable, two screws for the extruder and the extruder itself have…

Wydruk około 1,33 €–1,63 € nettoWstępna wycena jednego wariantu

Pobrania
62
Polubienia
7
Ocena
0
P
PrintablesZenmaster33

Nextruder Hotend and Nozzle holder for Skadis

Description: I needed a storage solution for 1 extra Nextruder hotend and something to store spare/different Nextruder Nozzles. So I remixed the model of Relive93 to store 1 Hotend and 4 Nextruder Nozzles on a Skadis pegboard. Print…

Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu

Pobrania
59
Polubienia
16
Ocena
5
P
Printablesv68AQP

Extruder rotation visualizer - 2 color without MMU!

I liked Mikolas Zuza's "triangles" extruder visualizer design and wanted to make a small modification of it. This new design allows you to print it with 2 colors on the same layer (with pre-made GCode or via manual slicing) without…

Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu

Pobrania
57
Polubienia
9
Ocena
5
P
PrintablesDiana Šinková

Hammerhead shark Christmas Ornament / Decoration (single extruder)

Hammerhead shark Christmas Ornament / Decoration single extruder - multicolor by leayers

Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu

Pobrania
55
Polubienia
14
Ocena
0
P
PrintablesAsus1357

Dart holder for MMU / single extruder available

I uploaded an old file but have uploaded the correct one (pointed out by a user :)) Visually based on model 1167828. Complete redo from scratch. This version for MMU. Uses key holes for hanging,(#6 screws). Load as project if you want to…

Wydruk około 2,80 €–3,42 € nettoWstępna wycena jednego wariantu

Pobrania
51
Polubienia
5
Ocena
0
P
PrintablesMartin

PrusaSlicer Extruder V1.3

2 Different Filament Black & Orange Magnetic 5.00mm X 4.00mm

Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
44
Polubienia
9
Ocena
5
P
PrintablesdePrintinator

Ferris Wheel Extruder Motor Visualizer

This extruder visualizer was fun to make. It was a challenge to fit it all into a 38mm square space and make it as thin/detailed as possible. It was an extra challenge to limit myself to a .4mm nozzle. I had to slow down the print a lot…

Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu

Pobrania
41
Polubienia
39
Ocena
4
P
PrintablesHemento

Super Metroid Emblem Extruder Indicator

Any Metroid fans around? Here is my take on Samus' emblem that you can use as an extruder indicator. Print in PETG or PLA with 100% infill and glue 2x 8x3mm magnets to the back of the print. For multiple colors use print stops where…

Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu

Pobrania
40
Polubienia
8
Ocena
0
P
PrintablesGorbParametrics

Fantastic Four 3D Logo (Single Extruder)

Easy to print multicolor, filament change at each top layer. Attached gcode file has pauses included in the slice. I added ½" magnet tape for a nice fridge magnet.

Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu

Pobrania
34
Polubienia
5
Ocena
5
P
PrintablesPat_S

Extruder wheel / Extruderrad

Diameter 26,0 mm Height 5,0 mm For the extruder wheel for the Prusa MK3S you need a 8x6mm neodymium magnet after printing. This is then pressed in and the wheel is placed on the shaft. Happy printing! If you like this thing leave a like…

Wydruk około 0,08 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
34
Polubienia
5
Ocena
0
P
PrintablesC3D

POCKET PAWNS : Single Extruder Travel Chess/Checkers Set

This portable chess and checkers set is designed to fit into any standard paper towel tube and can be scaled for different sizes. It features a simple coin design that is compact, light, stackable, and packable all in the size of a paper…

Wydruk około 1,96 €–2,39 € nettoWstępna wycena jednego wariantu

Pobrania
30
Polubienia
28
Ocena
0
P
PrintablesPreischl 3D

Pokestop Extruder Visualizer

Pokestop Extruder Visualizer Hey maker! 👋 Add a fun and practical touch to your printer with this Pokestop-style extruder visualizer. Features: Easy to mount using two 8mm x 3mm magnets (4mm also works). Stays securely in place while…

Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu

Pobrania
28
Polubienia
13
Ocena
4
P
Printableslordofhyphens

Protoxtruder mount for EBB36 Gen2

Print flat against bed, optionally with support on build plate

Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu

Pobrania
27
Polubienia
4
Ocena
0
P
PrintablesPobi

Creality CR-M4 sprite extruder plate

Creality CR-M4 sprite extruder plate. During shipping of my printer from a friend, the plate got damaged and bent. Since I can't find where to just buy it, I made it taking into consideration the original one. Left space for airflow. Can…

Wydruk około 0,91 €–1,12 € nettoWstępna wycena jednego wariantu

Pobrania
21
Polubienia
3
Ocena
0

CORE One L mod: Cat paw Nextruder lever

This is a CORE One L mod for cat lovers: the Nextruder level gets a cat paw that is trying to catch the bird on the grille handle every time the printer opens or closes the chamber ventilation. Printing There are two versions (of the…

Wydruk około 0,31 €–0,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
19
Polubienia
23
Ocena
5
P
PrintablesLudo B

Single Extruder - Dual Color. Mini spool holder hanging Prusa i3 MK3S+.

Ik vind het leuke spooltjes, hoe krijg ik die aan mijn Prusa i3 MK3S+ printer gehangen. Na redelijk wat tekenwerk paste het prefect. Om dat het zo klein is moet je wel heel voorzichtig zijn bij het plaatsen, de lipjes breken anders af. Er…

Wydruk około 1,24 €–1,51 € nettoWstępna wycena jednego wariantu

Pobrania
19
Polubienia
6
Ocena
0
P
PrintablesJ Fromel

This is The Way: Protector of the Nextruder LoveBoard

Do not print with Beskar fiber filament. It is far too heavy for the Nextruder to handle. Instead use something very light yet somewhat flexible. This print is with some cheap 8% Carbon filled PLA I got Amazon for about $30/kg and it fits…

Wydruk około 2,90 €–3,55 € nettoWstępna wycena jednego wariantu

Pobrania
15
Polubienia
2
Ocena
0
P
Printableslordofhyphens

Revised Protoxtruder 2.0 ebb36 mount for tapchanger

GCode is for a CoreOne with 0.4 HF nozzle and ABS print material. Height modifier set to help print the ziptie pieces

Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu

Pobrania
11
Polubienia
1
Ocena
0
P
PrintablesRudi

Modular Nintendo (NES) Catridges Wall mount - screw version & multicolor single extruder

I did some small modifications to original design by @Shabubu . Make sure to like his stuff. You will still need to head over to @Shabubu to download the "Pair of Brackets" file. This wall mount rack is designed specifically for NES games…

Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesOurAngryBadger

Bambu X1 PTFE Extruder Bracket AMS Error Fix

Do you have the following printer errors when printing with the AMS? Failed to pull out the filament from the extruder Failed to feed the filament into the toolhead Well, give this little mod a try! In my case, I found the most common…

Pobrania
24 047
Polubienia
2872
Ocena
4,75
P
PrintablesMkloberg

Taurus V5 Cooling Duct for Creality Sprite Extruder, Dual 5015 Fans, Ender 3 S1/S1 Pro/S1 Plus, CR10 Smart Pro (Stock / Spider / Ceramic)

Taurus V5 Final Release Part of this release in the display case for Klipper WiFi connected TFT displays, please check it out: https://www.printables.com/model/624504 We're sorry this took so long, but the V5 changes were quite drastic,…

Pobrania
10 707
Polubienia
1344
Ocena
4,87
P
PrintablesDCHFPV

Creality Ender 3 S1 Sprite/Pro Extruder Part Cooling Fan Duct

Disclaimer: Due to duct tips having close vicinity to the nozzle, use at your own risk of failed print depositing globs covering/melting the ducts. Low-profile part-cooling duct for stock Creality Sprite Sprite-Pro extruder 40x40 part…

Pobrania
8510
Polubienia
905
Ocena
4,81
P
PrintablesRossero

Single Extruder - Dual Color - Dutch Cow

This is the first design I made in my single extruder - dual color series. My final design is out right now and takes this principle to a whole new level: Single Extruder - TRIPLE Color - Sleepy Cat ! And now back to the cow This is a…

Pobrania
7798
Polubienia
2045
Ocena
4,86
P
Printablesrogerquin

Cable Chain ( SPINE ) for SOVOL SV06 3d printer extruder cable

This cable chain ( SPINE ) supports the extruder ribbon cable on the Sovol SV06 3d printer and stops it from sagging on taller prints. There are three special pieces for the ends of the spine. Refer to the pictures for correct placement,…

Pobrania
7060
Polubienia
1434
Ocena
4,86
P
PrintablesRui Reis

Ender 3 V3 KE Vibration Sensor Extruder Mount V2

Remake of the Creality Vibration Sensor for the E3 V3 KE Printed in PLA

Pobrania
6090
Polubienia
306
Ocena
5
P
Printableskriswillcode

Creality Sprite Extruder cable mount for Ender 3 / Pro

This mount is designed to hold the cable from the Creality Sprite Extruder Pro kit. The model referenced in the documentation fit poorly, had sharp edges, and looked bad. This design is cleaner and fits better, while holding the cable…

Pobrania
5456
Polubienia
655
Ocena
4,9
P
PrintablesFreshPrints

" Anycubic Key " Proximity Sensor height tool & Extruder Tension disengage tool & for Kobra 2 , Kobra 2 Max , Kobra 2 Pro , Kobra 2 Neo , Kobra 2 Plus

" Anycubic Key " 2 Tools in One Extruder Tension disengage tool & Proximity Sensor height tool. Disengage tool allows you to disengage extruder tensioner. Gives you the ability when you load your filament all the way without having to…

Pobrania
5228
Polubienia
592
Ocena
4,96
P
PrintablesNadir @ CN3D

MMX Multi-Material Extruder – Exclusive Final Release

🚀 MMX OG — Serial Number Registration Now Open! We’re officially opening serial number requests for the MMX OG (4-Color) Multi-Material Extruder . If you’ve built one and made it work — this is your moment to make it official. 🔩🔥 Each…

Pobrania
5209
Polubienia
849
Ocena
4,64
P
Printablesjedisct1

Nextruder nozzle wrench for Prusa MK4, Core One and XL

On the Prusa MK4, nozzles can be cold swapped. The procedure is actually far easier, faster and likely safer than removing the heat block as originally documented. After having cleaned your nozzle as documented (heat at 250 degrees for 5…

Pobrania
4940
Polubienia
1015
Ocena
4,96
P
PrintablesRossero

Roll Up Chess - Print in Place - (Single Extruder)

- Prusa Print files added! - Presenting you: my iteration of a Roll up Chess set! Please like, share, download, rate and all the amazing good stuff :) I have seen many roll-up chess models, but none that would fit my needs. What I really…

Pobrania
4837
Polubienia
3112
Ocena
4,89
P
PrintablesPetclaud

NEMA (extruder) motor rotation indicator

I always like to see what is going on with my printers. Sometimes I wonder what movement the extruder motor is making (extruding, retracting, slow, fast, etc.), which is not always so visible on the Prusa MK2 / MK2.5 / MK3. Hence I have…

Pobrania
4713
Polubienia
606
Ocena
4,85
P
PrintablesARTME 3D

Original Desktop Filament Extruder MK2 by ARTME 3D

Attention: These files are for version MK2. Please check which hardware you have! Please read these instructions completely and carefully. The requirements must be followed otherwise the function of the extruder may be impaired. The…

Pobrania
4378
Polubienia
606
Ocena
5
P
PrintablesIBNobody

MK4 Nextruder Nozzle Change Heater Block Clamp

Background As many of you have found, it is easier to swap MK4 Nextruder nozzles in-place rather than to disconnect and swap out the entire heater block. Problem In-Place Nozzle Swaps pose some amount of risk in that you have to hold onto…

Pobrania
4237
Polubienia
1027
Ocena
4,98
P
Printablesrace85com

Ultimate 5015 Part Cooling Dual Fan Duct for Ender 3 S1 (Pro) + Sprite Extruder

CHECK OUT MY NEW RELEASE → 5015 Hot End Fan Upgrade for Ender 3 S1 (Pro) + Sprite Extruder Design: I have created this model with the following considerations: dual, symmetrical airflow under the nozzle to be as light as possible- weighs…

Pobrania
4213
Polubienia
592
Ocena
4,7
P
PrintablesComrade_Zach

Creality Ender 3 S1 Fan Duct (Sprite Extruder) Version 3!!!

The stock part cooling fan and duct only cool the part from one side. This is my take on part cooling fan duct that directs air from three sides. I printed mine out of Prusament ASA. I print flat with tree supports 06/12/2023 Update:…

Pobrania
3968
Polubienia
419
Ocena
4,38
P
PrintablesMatthias E.

Flashforge Adventurer 5m Pro Extruder Pipe Guide

An extruder guide for Flashforge Adventurer 5m Pro to avoid scratches on the inside of the cover. The bottom part is made flexible to follow the extruder tube in any direction, while at the same time hold it down a little bit. Make sure…

Pobrania
3555
Polubienia
437
Ocena
4,92
P
PrintablesARTME 3D

Original Desktop Filament Extruder MK3S and MK3S+ by ARTME 3D

Attention: These files are for version MK3S light, MK3S and MK3S+. Please check which hardware you have! Please read these instructions completely and carefully. The requirements must be followed therwise the function of the extruder may…

Pobrania
3552
Polubienia
200
Ocena
5
P
PrintablesMightyeagle

buckle for extruder cable and the filament tube for FlashForge AD5X

This is an S-shaped dual clip designed to organize and hold two tubes in parallel. in this case, the extruder cable and the filament tube for the FlashForge AD5X 3D printer. Shape: The S-shape forms two opposing curved channels, each…

Pobrania
3547
Polubienia
313
Ocena
4,86
P
PrintablesNora

Ender 3 V3 SE Extruder Visualizer

Extruder Visualizer for Ender 3 V3 SE Print Settings Printer Brand : Creality Printer : Ender 3 V3 SE Supports : No Layer Height : 0.2mm Infill : 10% Filament : PLA

Pobrania
3504
Polubienia
375
Ocena
4,2
P
Printablesftobler

Soldering Flux Extruder

Handy tool for every soldering station. Accepts standard syringe style flux cartridges. Turn the know for precise extrusion. If you have trouble with bed adhesion while printing the screw, there a few tips: slow down use 'external…

Pobrania
3440
Polubienia
932
Ocena
4,93
P
PrintablesRobert Samples

Complete Orbiter V2 extruder 3D model

The mockup available only has the external shell and lacks any of the gearbox elements that would allow interesting repacks to be designed like what has been done for Sherpa mini and HGX extruders. I completed the CAD based on…

Pobrania
3343
Polubienia
178
Ocena
5

Ender 3 S1 / S1 PRO Better Ribbon Cable Protector (Sprite Extruder)

This is a quick remix. I don't have the cable inserted in the guides (see pic #2) with this cable protector I don't have to. Plus I can slide the protector more easily up when I need to connect the ADXL345 mount.…

Pobrania
3279
Polubienia
224
Ocena
4,96
P
PrintablesGerryPB

Extruder Visualizer

This is an extruder visualizer designed for the Original Prusa to replicate the iPad settings/downloading icon. It would likely fit others as well. It is for use with 8mm rare earth magnets. I added a photo of the brand I used that was…

Pobrania
3229
Polubienia
1218
Ocena
4,89
P
PrintablesARTME 3D

Original Desktop Filament Extruder MK2.5

Attention: These files are for version MK2.5. Please check which hardware you have! Please read these instructions carefully. The requirements must be followed, otherwise the function of the extruder may be impaired. The Original Desktop…

Pobrania
3191
Polubienia
963
Ocena
5
P

Bambulab X1 HotEnd / Nozzle & Extruder Holder

This is a holder for your HotEnds / Nozzle and spare Extruder, as well as some necessary screws/Mounts. The last of the top row holders is for a fully assembled Hotend/Nozzle with fan & silicone sock. Update 12/23/22: Added new version…

Pobrania
2916
Polubienia
238
Ocena
5
P
PrintablesMathieu

Prusa MINI/MINI+ Extruder Shield

Update (July 13th, 2022) After receiving feedback about mounting the shield and the occasional break, I have decided to strengthen a few parts of the design to prevent breaking during support removal, slipping off the left mounting point,…

Pobrania
2902
Polubienia
615
Ocena
4,79
P
PrintablesYosuke

Extruder cable clip for Prusa i3 mk3s

This is a small clip for the extruder cable. I was not satisfied by less fixing of the extruder cable of my i3 mk3s. The textile cable sleeve easily gets out of the original clamp and then the cable slack rubs the printing bed slightly.…

Pobrania
2888
Polubienia
587
Ocena
4,86
P
PrintablesRossero

Single Extruder - Multi Color - Easter Eggs (Extra Twist)

This is my 2025 iteration of my multi color slide together Easter Eggs! But this time with an extra twist One has an extra color added and the other is one of my previous designs that now twists together instead of slides together! Here…

Pobrania
2851
Polubienia
634
Ocena
4,81
P
PrintablesFizzy Chickens

Pen Plotter for Sprite Extruder ~ Ender 3 S1

Also see our Latest Project Launching on Kickstarter 30th April 2023 https://www.kickstarter.com/projects/fizzychickens/3d-printable-antikythera-mechanism Remix of Three Ducks in a Bear Suit Pen Plotter Requires 2 x M3 Bolts (To hold Pen…

Pobrania
2830
Polubienia
756
Ocena
4,78
P
PrintablesVoxel3D_NL

X, Y and Z calibration tool for IDEX / dual extruder / dual color 3D printers

Remix of the amazing design of Lmaker . Added a part to be able to compare/finetune the Z-axis (offset) as well. This is a 10-15min print to make life easier when calibrating the X, Y, and Z-axis of (independent) dual extruder 3D…

Pobrania
2787
Polubienia
215
Ocena
4,94
P
PrintablesARTME 3D

Original Desktop Filament Extruder MK3 by ARTME 3D

Attention: These files are for version MK3. Please check which hardware you have! Please read these instructions completely and carefully. The requirements must be followed therwise the function of the extruder may be impaired. The…

Pobrania
2697
Polubienia
347
Ocena
5

Sovol SV06 / Plus Extruder Colling Fan 5015

Printable without supports. Designed for GDSTIME GDB5015 24V. Unobstructed homing. Complete replacement for stock extruder cooling. V2: lighter design. Fixed cracking issue at screw hole. Requiered Hardware: 1x M4*20 1x micro JST plug…

Pobrania
2566
Polubienia
336
Ocena
4,82

Creality Sprite Extruder Model

Creality Sprite Extruder Model

Pobrania
2537
Polubienia
111
Ocena
3,5
P
Printablesnhchiu

ProtoXtruder

ProtoXtruder Latest update: 2024/12/12 An extruder that utilizes the large extrusion gears of HGX-lite gear kit and comes with the mounting pattern of the Sherpa Mini Extruder . There is also an untested version for Bondtech LGX Lite…

Pobrania
2478
Polubienia
470
Ocena
4,97
P
PrintablesDaniel Franc

Cute Articulated Dragon (Single Extruder – Dual Color)

About This articulated dragon is my design. It's made especially for the Single Extruder – Dual Color contest. In my opinion, it's cute and well flexible. You can make it as long as you might even want! The parts fit together well. The…

Pobrania
2455
Polubienia
1067
Ocena
4,9