"Oma" Plätzchenausstecher
Resolution: 0,2mm Nozzle: 0,4mm
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
- Pobrania
- 75
- Polubienia
- 5
- Ocena
- 4,5
239 modeli
Resolution: 0,2mm Nozzle: 0,4mm
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
This is my rendition of a 2-Gang Surface Mount Box for Decora Remote Controls specifically for the DBX ZC8 controls, might fit ZC9 as well. I recommend you do not use a boot in the RJ45 as there is limited space and keep the daisy chain…
Wydruk około 11,09 €–13,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Studenti si navrhnou a vytisknou vlastní spirograf, kterým si mohou nakreslit opakující se obrazce.
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
Leg for CZC Gaming Crusader keyboard. Fits perfectly. Printed with Creality PLA, 0.1mm, 15% infill, with supports.
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
Scroll down for firing demo video ⬇ Please leave a like and rating and consider posting a make if you print and enjoy the project! The Zc Aus is a pocket-sized, high-powered, mag fed (5-13 dart capacity) foam dart (Nerf) spring-powered…
DISCLAIMER: I designed the potions for a friend and they wanted a poison apple along side them. I did not design the apple in the pictures I took but if you wish to get the full set you can support creator JAVIBU13 at…
Specs: These are high poly scans, the average poly count per mesh is about 2,500,000 triangles. NOTE: 3D scans aren't perfect, if light cannot hit certain parts of the object then the scan will contain 'Blobs' in those areas. These scans…
Pusta tablica rejestracyjna biała dla samochodu spalinowego i zielona pusta dla elektryka. Czcionka do pobrania poniżej.
Sterne in Form eines Baumes für zB die Klötzchen. Nette Deko für Weihnachten. Hier auf den Bildern auf 66% Skaliert.
Plätzchenform für Feuerwehr Fans
Kleine Krippe als Deko für Weihnachten. Kombiniert mit den bekannten Klötzchen.
Mezclador para taladro diseñado para impresion 3D Utiliza una tuerca de 3/8" y una varilla roscada o tornillo de 3/8". puedes usar el largo de la varilla de acuerdo al uso que le des. Puedes limpiarlo despues de cada uso para seguir…
Stojak na końcówki do szczoteczki oral-b
The GI Joe Classified Trubble Bubble was lacking a flight stand, so I made a little attachment that fits on the bottom and has a hole for a 6mm peg compatible with Mezco flight stands. Now fly, my pretties!
Some very old cookie cutters gone lost, so I have recreated them to ensure there is no shortage of these classical cookies! https://cad.onshape.com/documents/ef4b67b2c175f5678b45bf47/w/2ccde084d1ddb12db11db955/e/9c4045429b544a090ba7fb17…
JetKVM 1U Rackmount Remix for 10" Racks – Built for EZCOO KVM Integration Meet the JetKVM-KVM — a clean, compact solution for managing up to four systems with a single JetKVM and a KVM switch. Designed to fit 10" racks, this custom 1U…
🎄 Bring Christmas to life with the cheerful Gingerbread Woman. 🍪 This 3D model is a sweet remix of the Gingerbread Cookie figure (by Overture3D – https://www.printables.com/de/model/669856-easy-filament-swap-gingerbread-cookie ) – now as…
First time making and uploading a model. Should be simple enough to print since it was built in 3D Builder. Original file from here: https://www.thingiverse.com/thing:4865742
Blitzcrank from Leage of Legends
An easy print and fit starting point for replacing your fog light to duct air to your brakes. Mounts in the same way as the stock fog lights so shouldn't need any fettling or adjusting. It's a tight fit, but I made it to fill all the…
Pogoń Szczecin Logo Click in Prusa Slicer "Set auto color changes" to generate auto colors.
The model has been enhanced by narrowing the opening of the clip and constructing a feeding aid. Furthermore, chamfers have been incorporated to optimize both its aesthetic appeal and functionality.
This is a part I made to make it easy to draw circles mainly during math lessons and tests. The device is assembled with three or four parts: The main body. The base (the thing that touches the paper). A bearing (10x14x4 mm). A piece of…
This is an Custom Pickguard for my "Squier Paranormal Offset Telecaster". Mine came with an Singlecoil Telecaster Neck pickup and an pickguard for that but the Body is already routed for Humbucker in Neck and seemingly up to Strat…
Kätzchen -coffee stencil
easter-bunny cookie form / Osterhase Plätzchenform
Based on OEM 78132-68L01 roof rack cover. You can engrave anything on it in the slicer or just use Your favorite printing plate to give it a finish You want. For short use/cold countries: PETG Recommended: ASA (ABS if painted)
Print the flexible parts first, then print the body in a rigid plastic with pauses to insert the flexible parts. The flexible parts are put in upside down (side printed on build plate faced up). Print a total of 10 of the bristles (5 of…
This is a wall mounted holder for the Ryobi EZClean 18/40v handheld pressure washer accessories. I designed this to hold a spray wand(or wand extension), 3 spray heads, the soap sudser, and the angle adapter. And if you have the bucket…
Plätzchenform für Unimog-Liebhaber ;-)
Blitzcrank es un autómata enorme, casi indestructible, creado originalmente para el tratamiento de residuos tóxicos. Sin embargo, este propósito original le parecía demasiado restrictivo, así que se automodificó para servir mejor a los…
Kann je nach Bedarf noch etwas skaliert werden ...
Different variants cases for the cod.m ZigBee Coordinator (CZC-1.0). Currently the default one for desktop use and a wall mount variant. Print the wall mount version with support for the mounting hole. Otherwise there are no supports…
Ausstechform für feine Backhasen. Am besten ein “lebensmittelechtes” Fillament verwenden. Beim Drucken einfach einen schmalen Brim innen und außen für die ersten 10 Layer z.B. so ergibt sich ein stabiler Rand zum anfassen und eine gute…
Zann Consortium's Interceptor-IV frigate for Star Wars: Armada. If you like my work and want to support me you can visit my Etsy shop: https://www.etsy.com/shop/OnilCreations Or become one of my patrons you will get free and exclusive…
Hi, I hope you will find this project useful, it is a basic feeler gauge that I will use on escalators
Figurka Jaszczurki figurka jaszczurki o zaokrąglonym, minimalistycznym kształcie i delikatnie teksturowanej powierzchni. Jej zabawny, kreskówkowy wygląd i kompaktowy rozmiar sprawiają, że idealnie nadaje się jako dekoracyjna ozdoba…
Diesmal etwas völlig anderes: Keksausstecher für Doppelkekse oder Weihnachtsplätzchen. Er besteht aus 4+1 Teilen: A-D werden zusammengesteckt, E dient zum Auswerfen der angesammelten “MIttelteile” , also zum reinigen. Die Teile sind also…
Inspired by the artwork of Leesha Hannigan, in the Daggerheart beta 1.5 test material. Found here: https://www.daggerheart.com/ Idéale pour la résine, vous pouvez l'imprimer avec des supports. Un conseil, forcer ceux de l'épée car très…
Plätzchenausstecher Cupra Logo, druck entsprechend eigener Vorlieben im Slicer skalieren Am besten in PETG drucken
Pedal riser to raise the throttle pedal and provide better contact on the back plate as the two profiles don't match. Model is parametric to adjust the height as needed. May also help with heel-toe.
Nazca whistle bottle. (This version is non Functioning as a whistle) Solid. Added Uv Textures. Selective smoothing. Added Bottom.
The #1 complaint about the RYOBI EZClean 320 PSI Cleaner is that the hose connection breaks off. I tried to solve this by making a hose holder that attaches to the tool grip. This tool is great for small cleaning jobs. I use the rinse…
Agitadores para bebidas y tragos.
print it with a flexible and transparent filament
Credit for the teleprompter goes to KatzCreates: https://www.printables.com/model/90999-camera-lens-mounted-teleprompter
Für alle die danach suchen, ein kleiner spezieller Plätzchen Ausstecher. Lasst einen like da!!!
I like the design of Benny's caliper mount, but I have a tool wall on my desk, not pegboard. I followed this basic design, but I didn't actually import that design. It's a little bulky to make it printable without supports, and it prints…
My original fog lights had broken and I had been getting by covering them over with duct tape. I soon grew tired of the way they looked, and made this to test my improving CAD skills. I printed mine in ASA for UV resistance. There's a lot…
Das ist ein Ersatzteil für den Koffer für die Mauernutfräse DC-SE20 von Hilti. Da die normalen Clips bei mir alle nach ca. 1.5 Jahren abgebrochen sind habe ich mal versucht diese nachzuzeichnen in Fusion. Sie sind nicht perfekt und…
Stempel (Stamp) Herzchakra - Ø 33mm PLA 15% infill
This is a modification for the stock gear shift in a 3rd Gen (ZC32S) Suzuki Swift Sport (6 speed) that will improve the engagement of gears if yours has worn and become loose. NOTE - almost everyone will have worn shift cable bushings and…
Intex jakuzzi befolyó csonkja és a venturi elven működő víz alatti pórszívó közé.
Compatible with Vallejo's bottles. It doesn't works with AK or Citadel paints, but you can design a compatible eccentric wheel (hole radius: 2,5-3mm depends on fan's brand). Also need: At least 2x (ideal 6, 4x for foots) M3 10-15mm screw…
Schneeflocke als Deko für den Winter und Weihnachten. Kombiniert mit den bekannten Klötzchen. Habe das Klötzchen als negatives Volumen in der .3mf Datei eingefügt und anschließend mit Stützstruktur gedruckt. Klötzchen hab ich mit meinem…
I very much liked the original idea but saw there some remnants from the OEM design that weren't needed for a 3D printed version. I also wanted it as an all in one instead of a separate ball join piece as I didn't have the hardware on…
Kuzco Crown for cosplay
W pliku "pogon.3mf" bordiura przechodzi przez wszystkie warstwy, co znacząco zwiększa liczbę pauz potrzebnych do zmiany filamentu. Jeśli chcesz ograniczyć ilość zmian filamentu, wybierz wersję "mniej zmieniania filamentu.3mf", w której…
Cordless tool battery adapter. Ozito Battery to OLD Ozito skin tools in this example an old Ozito Hammer Drill OZCD18V2A Extra hardware spade connectors wire fuse terminal small self tapping screw - for a permanent fit, assuming you're…
I found the rackmount from “cjdawson_com” interessting and build it myself. I had a few problems with the keystones not holding correctly. So I merged the Keystone Panel Mount from “M” with the original model and also added a few extra…
Uniwersalny pojemnik na szczoteczki.
Full height PCIe bracket for Inspur YZCA-00431-102 network card Heavily modified remix of this model
Replaces the OEM fog light with an adapter that can used for ram air to the intake or an adapter for brake cooling (not designed let). It's a modular design for easier printing and will allow you to create custom attachments for things…
Kann nach Bedarf skaliert werden ...
The EZConnect Creator Cage is a modular protective cage made for GoPro HERO 9 through HERO 13 cameras. Its EZConnect mounting system is tested to handle over 45 lbs of pull force and features an integrated cold shoe mount for attaching…
Dzień Dobry. Projekt stojaka na szczoteczki wraz z ociekaczem. Można postawić na drewnianym blacie w Łazience bez obaw:)
Com dimensões de aproximadamente 78x80x15 mm, este design 3D é perfeito para fãs do jogo e ideal para festas temáticas, presentes criativos ou para criar lanches divertidos. Fácil de imprimir e usar, garantindo cortes precisos e bem…
The holder is very simple in construction so there is no problem to print it. The advantage of the stand is a simple hole in the middle that makes your toothbrush will serve you for many years. Unfortunately, when you put the brush down…
Autodrom Pomorze, Pszczolki, Poland, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
Aquila X2 has a different Y carriage plate and so I needed a different ZCC part
Store your spray nozzle on a wall or under a shelf
Mezclado para taladro o atornillador, para botes de pintura de 17ml tipo vallejo, Hace falta un rodamiento de 22mm de diámetro exterior y 8mm de diámetro interior. Se imprime al 100% de relleno a 0,2mm de capa.
Rackmount for the 4-port ezcoo KVM 4x1 switches that are recommended integration with PiKVM for controlling 4 machines. Supported devices include: ezcoo EZ-SW41HA-KVMU3P (ideal for PiKVM) ezcoo EZ-SW41HA-KVMU3L
Case for the cod.m ZigBee Coordinator (CZC-1.2). Usable for desktop use as well as wall-mounting. Print the bottom part with support for the screw holes and the wall-mount holes. The light tunnel is an optional addon which snaps in the…
What do you need is just a print (two of them) and a spring from original clothespin
Updated the intake from https://www.thingiverse.com/thing:5178034 to have the vacuum port orientated updates and further down the intake to create more vacuum to prevent error codes for boost reference issues. All instructions and…
Cedule pro modelovou úzkorozchodnou železnici Jindřichův Hradec - Nová Bystřice - Waggonfabrik BAUTZEN - narrow-gauge
Základní geometrické obrazce a útvary - krychle, kvádr, jehlan, válec, hranoly, obdélník, čtverec, elipsa, trojúhelník, kruh,…
Zapiaszczacz do lufy MSBS Grot, przeznaczony do zabezpieczenia wylotu lufy karabinka MSBS Grot przed piaskiem, pyłem i innymi zanieczyszczeniami podczas transportu lub ćwiczeń w terenie. Model należy traktować jako osłonę i przed użyciem…
Spinnengift und Krötenschleim Spare Parts / Ersatzchips for the board game "Spinnengift und Krötenschleim" https://de.wikipedia.org/wiki/Spinnengift\_und\_Kr%C3%B6tenschleim Our public library is giving away the game and unfortunately…
[CAT] Aquesta és una figura decorativa fan art de Wojciech Szczęsny, porter del FC Barcelona. El model el mostra amb l'equipació oficial de porter de la temporada 24/25, de color blau cel amb línies verticals, subjectant una pilota de…
These are the equivalents of the aluminium sets you see for sale such as https://www.rhdjapan.com/tm-square-shift-collar-set-swift-sport-zc33s.html These improve overall gear feel and make it feel more positive/clicky. Plastic may not be…
Organizer - stojak na szczoteczki do zębów i pasty których zawsze za dużo :)
Podkladka-lejek do czystego spuszczania oleju z pompy myjki karcher hds 696 lub podobnych
Szpulka do bojki sygnalizacyjnej. Do nawinięcia 35 m sznurka.
British band Buzzcocks beer mat. Designed in Fusion 360 for printing on my Prusa i3 Mk3 with MMU2. I printed this at 95mm x 95mm x 2mm with 100% infill. For more beermats, see my group: https://www.thingiverse.com/groups/beermats/things…
Ideální profil proti zmačkání výstelky. Sluchátka se opírají o pevný okraj výstelky. Počítá i s tím, že sluchátka povešená u stěny nevisi svisle ;) Ideal profile to prevent the lining from creasing. The headphones rest on the firm edge of…
Medidas: 130x130x4.5 mm (esas medidas dan por el contorno circular para que se pueda agarrar y no lastimarse al cortar). Tiene 1 mm de grosor. Reforzar '' el grosor de la pared '' : 1.2 mm Relleno: 5%
Ender 5 Plus Silent Fan Mod Strömungslüftung Schlitzcover Abdeckungen by pakkko * English: * Here I uploaded the necessary covers for you to close the side and bottom slots on the Ender 5 Plus housing. So you can then create a perfect…
mozCUBE features overhang, tolerance, thin wall, surface detail, and retraction tests. Has a print in place rotating column that locks in place with the included screw. 20mm original width. Rotate the N into a Z and lock it in place with…
The model was made for use during the city game. A photo of the original coin was used, leaving out most of the damage, dents and other imperfections. It should be printed using a 0.2mm nozzle. Print and glue together.
There are 2 versions: universal and perfect fit for younuon 92mm fan (which I recommend btw, it's quiet and cheap). You can cut 1mm from bottom – it'll be rigid enough. FYI : CZCL PSU's fan doesn't start immediately after printer starts –…
uszczelka do węży ogrodowych szybki druk polecane rzeczy w druku warstwa 0.15 prędkość 50mms temperatura stołu 60 dysza 250 druk wykonać z tpu 95a
Asus Zenphone max protective cover, can be done with pla or tpu 1 version is with a card slot in the back (card can not be removed from the cover without first removing the phone) 2 version is just the cover. I prefer to print it with 10%…
ZChain was designed to print flat and fast. Frees up counter space! Uses friction fit links and spacers to hold the roll center from the inside. Screw mounts are included to hang a ZChain horizontal if desired. 60mm, 70mm and 80mm mounts…