14 900 modeli
Description With the Nextruder, you have two ways to change the nozzle - you can replace the entire hotend or just switch out the nozzle without removing the whole assembly. However, changing just the nozzle involves some risk. You need…
Wydruk około 1,17 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is deceivingly hard 8 piece durable puzzle box designed to be difficult to solve and simple to print. Any rigid material should work. However 2, 5mmX1mm circular MAGNETS ARE NEEDED. Other than that and a little glue it's ready to…
Wydruk około 7,48 €–9,14 € nettoWstępna wycena jednego wariantu
UPDATED: see the new and improved print here: https://www.prusaprinters.org/prints/103948-sliding-number-puzzles-print-in-place-15-puzzle These are my 3d printed version of the classic sliding 15 puzzle. I've also included a 3x3 8 piece…
Wydruk około 3,30 €–4,03 € nettoWstępna wycena jednego wariantu
There are 363 ways to fit the 16 pieces into the frame. Good for all ages. Hint: The solution is engraved in on the backside, so you can't lose the solution. :-) Enjoy your time! Print instructions Print at least from two colors.
Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu
No brim or supports required. A set of finishing nozzle tips designed for silicone, caulk, sealants, adhesives, and similar cartridge-based materials. The nozzles screw directly onto standard cartridges and feature integrated finishing…
Wydruk około 2,66 €–3,25 € nettoWstępna wycena jednego wariantu
This is my 3D-printed version of the classic sliding 15 puzzle. I also included a smaller 3x3 8-piece puzzle along with a larger 5x5 24-piece puzzle. These are fully print in place, so the pieces all interlock straight off the printer.…
Wydruk około 2,92 €–3,57 € nettoWstępna wycena jednego wariantu
The box is symmetrical. You can draw the path to the exit on one of the sides. See image for solution (see my board game collection : https://www.prusaprinters.org/social/38889-djedje_zr7/collections/72597 )
Wydruk około 4,55 €–5,57 € nettoWstępna wycena jednego wariantu
A small model I've customized to be cute and fun. The large blank space can be used to add custom text or a logo with the negative volume feature of PrusaSlicer. I usually print out a few with extra filament and carry them around so I can…
Wydruk około 0,62 €–0,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of "Wave Puzzle 7" by ThinkingPegasis. ( https://www.thingiverse.com/thing:3739933 ) Changes and/or improvements over the original: Thicker pieces Pre-flipped a few of the tiles to not give the solver a hint based on the surface…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
It's a box for your 3D printer nozzles. Specifically, it's made for E3D v6 compatible nozzles, like those used in the Prusa printers. It fits 14 nozzles, 2 each of: 0.25, 0.3, 0.35. 0.4, 0.5, 0.6, and 0.8 mm. (These are the sizes that…
Wydruk około 2,59 €–3,17 € nettoWstępna wycena jednego wariantu
Stack all 12 hexagones and connect them with 13 pins (dowels). This requires a lot o thinking! . Each hexagon is different, and to win every hole on every slice has to be filled with a dowel. Great for kids, however, just as appealing for…
Wydruk około 1,61 €–1,96 € nettoWstępna wycena jednego wariantu
I've seen an interesting puzzle from Youtube ( https://www.youtube.com/watch?v=j6D1ie94y4M ) so this is it. Print 12 pieces of this to create one set of this puzzle. Category: Puzzles
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
A high level puzzle box 70 moves to open, but only if you don't hit a blind end of the maze. Made in Burrtool, xmpuzzle file is included and contains the solves and the parts. I added a 0.15 offset between the maze parts and 0.2 between…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena jednego wariantu
Beefore you start This is an assembly kit that you have to make by printing separate parts and fitting them together. If you want to make it sturdy use some glue but in my experience, I did not need it. I will feature your prints on my…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a stubby nozzle for the Milwaukee M18 FUEL Blower. This nozzle is for the NEW blower model (3017-20) that Milwaukee just released in 2024. I couldn't find one available for this model yet, so made my own. I was able to get it to…
Wydruk około 13,60 €–16,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This foamer uses the Venturi effect as an injection method, no pressurized systems Gardena-compatible hose connector Interchangeable screw-on nozzles: spray, jet, foam, and fan(only the foam nozzle works at high pressure with the…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
A puzzle box in the shape of a brick block. Printing All parts can be printed without supports, however Level 4 includes some long bridging that must not droop for good functionality. This project includes a version of this object with…
Wydruk około 5,03 €–6,14 € nettoWstępna wycena jednego wariantu
Update: Prusa XL 5T (4 Color) Multi Material Single Print project file added In my pursuit of a 3D-printable Torii, I faced a common issue – all models out there weren't quite compatible with FDM printing. They required more support…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena jednego wariantu
tl;dr If you want to switch between E3D nozzles on your CORE One, you should use this tool instead of the original. Because for E3D nozzles the heater block needs to be installed higher, the original nozzle replacement tool is…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Because changing nozzles with the supplied multi-tool was too wobbly for me, I developed a simple tool to hold the hotend more stable. As can be seen in the CAD image in cross-section, the tool is designed in such a way that the hotend…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Round version of the eye is added Project file added G-code file added
Wydruk około 8,89 €–10,87 € nettoWstępna wycena jednego wariantu
No brim or supports required. Threaded nozzle tips designed for silicone, caulk, sealant, adhesive, and similar standard cartridges. The set includes multiple nozzle variants: Flat tip 45° angled tip The threaded base allows the tips to…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
These nozzles feature the usual ½ inch (ISO228) thread that fits on most shower hoses. They create a very pointed and strong water jet that lets you power-wash the outlet of your shower or bath tube. The credit for the idea to print this…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
Compact Remix of my High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter.…
Wydruk około 2,09 €–2,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed another super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. This one has a sweep/broom/wide opening, especially useful for drying your car. I printed at 1.5mm line width using a 0.8mm nozzle and…
Wydruk około 4,45 €–5,44 € nettoWstępna wycena jednego wariantu
3 Kit Cards to print and gift to someone 148 Pieces, each optimized for FDM printers from the wood cut original Step by step assembly instructions available further down on this page 310mm x 180mm size of the finished model Friction-fit…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena jednego wariantu
version v2 model is now available (:
Wydruk około 4,54 €–5,55 € nettoWstępna wycena jednego wariantu
I saw this cool puzzle on TikTok and just had to model it for printing! The goal is simple, just fit all 6 game pieces through the hole in the box. It's fairly simple once you fiddle around with it for a little bit, but fun to entertain…
Wydruk około 5,86 €–7,16 € nettoWstępna wycena jednego wariantu
Which nozzle is the best in it´s spinning top version? Easy to print easy to have fun with. Just… let it rip! If you want a different nozzle version just let me know and send me a imagen in the comments Print instructions Print the…
Wydruk około 6,83 €–8,35 € nettoWstępna wycena jednego wariantu
Here are the files for my Trick puzzle This only has one way to go together (its really not that hard) and if you pick it up by holding 2 pieces its fine......But it you pick it up by holding just one part it will fall apart immediately.…
Wydruk około 2,69 €–3,29 € nettoWstępna wycena jednego wariantu
A replica of M4 muzzle brake (M4QD-type), designated for use with KAC QD suppressor replicas, but can also be used alone. The muzzle brake should be screwed onto the replica (CCW thread) so the windows are facing upwards. Use the enclosed…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Here is my design of a Europe map. You can either use this as a game, a puzzle or for educational purposes. Note that this is the geographical Europe (not the political). You will find the country names on the back side. I used the…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena jednego wariantu
Pre-Sliced the Temperature Tower starting with the Generic PETG Profile in PrusaSlicer and added the temperature changes accordingly. Included the .STL too, keep in mind when using it you need to add temperature changes by right clicking…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Puzzle Box V NIce easy to print Puzzle Box - great way to give a small gift. Once closed, the box is very eay to open - if you know how! This is updated fifth (and I hope final) version in my "Puzzle Box" series...Now even harder to…
Wydruk około 3,17 €–3,88 € nettoWstępna wycena jednego wariantu
I just loved this model. Remix of Lizzard to add smile and some texture on back. Sliced files added for PLA with 1, 2 or 3 Lizzards. Very cute original design by McGuyBeer and remix of Curled Articulated Lizzard by Stetofire.
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
Update: January 22, 2023 Inspired by @Wolfaert's remix, I decided to make a no-support version of the obelisk top. Print egyptian-obelisk-puzzle-top-no-support.stl as-is, no supports required. ----------------------- My 5th grader is…
Wydruk około 3,55 €–4,34 € nettoWstępna wycena jednego wariantu
Can you solve this 3d puzzle? It consists of 18 parts, so seems to be pretty easy. In original size each cube has an edge length of 2 cm (little smaller because of some tolerance), so the whole puzzle is 8 cm long in every direction. The…
Wydruk około 3,49 €–4,26 € nettoWstępna wycena jednego wariantu
MC Escher's famous lizard tessellation made into a puzzle with a storage box. Print instructions Print as many puzzle pieces as you wish, in as many colors as you wish. I have 27 printed and they all fit in the box nicely with room to…
Wydruk około 5,63 €–6,88 € nettoWstępna wycena jednego wariantu
This is a completely print-in-place sliding tile puzzle. There are six models and a customizable puzzle you can make simply using PrusaSlicer! 4x4 Plain (Blank Tiles) Numbered 3D Elevation Puzzle 3D Spherical Cap 5x5 Plain (Blank Tiles)…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu
A replacement straw for “Great Stuff” spray foam canisters. If you're like me, you have many small jobs, but after one use, the straw becomes clogged and unusable. With this model you can print your own and reuse a partially spent can…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
If you like my work and would like to see more, please consider buying me a coffee I needed a bottle for wood glue and I needed something cost effective. buying bottles specifically for decanting wood glue, wrecking the bottle with glue…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
If you are willing to take more time and really dial in your Z heights, please check out my new DETAILED first layer calibration for Revo Six (or any 0.25, 0.4, 0.6, 0.8mm) nozzles . If you simply want a fast way to set or confirm your Z…
Wydruk około 0,04 €–0,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…
Wydruk około 4,77 €–5,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the slim nozzle for Electrolux Ultrasilencer vacuum cleaner that uses special shape for accessories. Print instructions Print with brim as the object is tall with small print bed contact area.
Wydruk około 3,41 €–4,17 € nettoWstępna wycena jednego wariantu
The goal of this puzzled is to fit all 9 pieces into the frame provided. More challenging than a normal jigsaw-puzzle! Model include handy cover, made with PrusaSlicer modifiers . Check the .3mf file. Enjoy Inspiration from…
Wydruk około 2,32 €–2,84 € nettoWstępna wycena jednego wariantu
Das ist ein Würfel-Puzzle mit 3 Unterschiedlichen Stufen(leicht, mittel und schwer). Viel Glück :)
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Remix mit Noppen und Fuzzy-Skin für ein besseres Handling.
Wydruk około 3,29 €–4,03 € nettoWstępna wycena jednego wariantu
Check out the IMPROVED Lunar Lighthouse Puzzle Box here! This lighthouse themed puzzle box has lost its lamp room. Can you open the puzzle, retrieve the lamp room, and restore it to the top of the lighthouse? Bonus: Find the “Bonus Moon”…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
Ich habe das Puzzle mit der MMU über Repetier-Server gedruckt. Der gcode ist für die MMU. Wenn Ihr ohne drucken wollt, nehmt ihr die stl-Datei. Im Prusa Slicer dann auf das Objekt gehen, rechte Maustaste und “Modifizierer hinzufügen”…
Wydruk około 1,38 €–1,68 € nettoWstępna wycena jednego wariantu
Here's my design of a Prusa XL Nozzle Scrubber / Brush. There are tools for correct assembly, brush holder and filament collector. Drawn in Fusion 360 Print instructions ¤ Remenber to use tree support on Brush holder ¤ Use .3mf or .gcode…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description This is a simple yet challenging puzzle, can you fit all to the T Shapes into the box? What to print: Five T Shapes: 6 x T In The Box - T Shape.stl One Box: 1 x T in the box - Box.stl One Lid: 1 x T in the box - Lid.stl The…
Wydruk około 1,11 €–1,36 € nettoWstępna wycena jednego wariantu
The Prusa i3 MK3/MK2.5 R3 update comes with a nozzle fan holder, but it can be improved on several points. Features: Plugin replacement for standard holder. Uses two screws to give fan a solid mount onto the holder. No obstruction of…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dart shells, compatible with all Buzz Bee toy blasters. These allow for compatibility with solid-core darts. They have better performance characteristics, and you should see an obvious performance increase over the stock shells. You can…
Wydruk około 0,97 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a thumb rest designed to fit on a Fender/Squier Jazz Bass or similar. It won't fit on a Precision due to the hole spacing being different. Since it uses the already existing pickguard screw holes no drilling is required. The…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
I designed this for my King Industrial 14inch band saw model KC-1433FXR, It also fits Grizzly model G0555 bandsaws as these are the same bandsaws with different branding…. This has a much smaller slot that lets you get in close with small…
Wydruk około 0,97 €–1,19 € nettoWstępna wycena jednego wariantu
I was informed my previous version https://www.printables.com/model/728282-ergonomic-grip-for-miyoo-mini-plus-multipart-for-m was too big for some smaller hands so I crated this version (and a stand to go with it). Print with brim and…
Wydruk około 5,91 €–7,22 € nettoWstępna wycena jednego wariantu
This is a new design of the venturi nozzle V04. If you tested the older version too, please tell me which is best. With this print you can upgrade your normal compressed air gun to a gun with a venturi nozzle. This design is for a…
Wydruk około 0,64 €–0,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Crevice tool for vacuum cleaners with tube diameter d35 mm (tested on Thomson). Possible extension from 120 mm nozzle up to 280 mm. Printed with Pusament PETG. Layer height 0.3 mm should be enough since its not a mechanicaly exposed part…
Wydruk około 2,75 €–3,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just finished season two of JoJo's bizzare adventure. Loved Iggy, he is favourite mutt! So I made a sculpture of him you can print. :)
Wydruk około 4,12 €–5,04 € nettoWstępna wycena jednego wariantu
All in One Temperature & Bridging Tower - PLA MK4S GCode. Specifically sliced for the latest MK4S version with the 0.4mm high flow nozzle (HF0.4) Uses the default PrusaSlicer 0.2mm STRUCTURAL preset as that is what you will most likely be…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
Prusa Automatic Nozzle Cleaner This solution is for the Prusa MK-series printers, that don't really have an out-of-print area, most solutions will either collide during bed-leveling or can't coop with the PINDA-sensor. If your printer…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
This Evil Puzzle will keep you busy for many many hours. Simply place the four puzzle pieces within the available space. There is an easy and a hard option. Credits & Features This design is based on hairyfacedhoomans puzzle , where i…
Wydruk około 3,62 €–4,42 € nettoWstępna wycena jednego wariantu
This is a compact and efficient vacuum cleaner nozzle, designed with a focus on versatility and convenience. This Model is available in 3 different lengths. 100mm, 150mm and 200mm. Every Version features a 20mm x 100mm opening at the top,…
Wydruk około 3,17 €–3,87 € nettoWstępna wycena jednego wariantu
Two color swap options to choose from “Whole Body” version: To achieve a two color butterfly as shown in the tile picture., change filament after half of the layers to print. “Wings & Body separated ” version: Print the body parts in a…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
Intro There’s something truly magical about dropping a bath bomb into warm water. It fizzes, it sparkles, it releases your favorite scents while nourishing oils gently shimmer on the surface. The water comes alive — and so does the…
Wydruk około 5,96 €–7,29 € nettoWstępna wycena jednego wariantu
m3f included with all parts ready to print and suggested supports. Should all fit together if your printer is fairly accurate.
Wydruk około 4,73 €–5,78 € nettoWstępna wycena jednego wariantu
Do you not want to storage your nozzles beautifully and on your honeycomb wall? Here is an holder for the honeycomb storage wall which allows you to organise your nozzles by size. The model has the sides labeled as follow: 0.6mm x2 0.4mm…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
This is a triangular twist puzzle. This is a relatively easy puzzle to solve. The objective of the puzzle is to assemble the three pieces into a triangle. The puzzle should be able to be assembled with little to no force exerted onto it,…
Wydruk około 2,00 €–2,45 € nettoWstępna wycena jednego wariantu
Secret box size : 40x20x30 (L x W x H) Until 02/14/2022 contact me to personalize it with your text on the front front face For Better render : Print it with prusament Red lipstick (…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
holds 10 nozzels
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
This is Oliver, a pig themed sequential discovery puzzle box I designed. There are 20 individual pieces, and five small compartments you'll discover along the way. I don't think this is an extremely difficult disassembly, maybe a 5/10,…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
With this print you can upgrade your normal compressed air gun to a gun with a venturi nozzle. This design is for a compressed air gun with a diameter of 7,5 mm on the nozzle tip . For larger diameter you can change the scale in your…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
Write your text with this puzzle 26 letters + @ + . Layers 0,15 mm Print in 2 colors : first color from 0 to 2,45 mm second color from 2,60 to 3,05 mm
Wydruk około 5,54 €–6,78 € nettoWstępna wycena jednego wariantu
A small case to store your extra nozzle. There are three files 1, Top reads 0.4 Nozzles, 2, Top reads Nozzles, 3 Top is blank
Wydruk około 0,93 €–1,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix from https://www.thingiverse.com/thing:2172585
Wydruk około 1,83 €–2,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I did a quick remix of 3D Printy Print-in-Place Twisty Puzzle - Christmas Tree to have both simple and difficult versions of the Xmas case. This is the latest version of each puzzle. This is not the full print in place puzzle, you will…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
This is a stubby nozzle for the RIDGID R01601K 18V Brushless 130 MPH 510 CFM Cordless Battery Leaf Blower. Use organic supports, but block supports in the inside section where the clip attaches. Print the clip on edge horizontally so that…
Wydruk około 11,13 €–13,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have created an educational 3D-printable model to help children explore the function of semicircular arches, inspired by the hands-on learning approach of Montessori. Based on the Roman aqueducts, this model is my entry in this 3D…
Wydruk około 2,79 €–3,41 € nettoWstępna wycena jednego wariantu
This is a remix of the remix of the remix of the original - using the lift away nozzle holder and bucket inside the bucket - but going back to the original 6x3 magnets, which is what I had since they're used on all the other Voron stuff.…
Wydruk około 3,51 €–4,29 € nettoWstępna wycena jednego wariantu
These holders hang from the XL's side extrusions to store your extra Nextruder nozzles. When the nozzle is in an extruder, the holder becomes a label that clips on to the extruder to remind you which nozzle is currently in use. The .3mf…
Wydruk około 3,74 €–4,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My iRobot BraavaJet 240 floor washer clogged. The nozzle that sprays just dripped, so I went online to look for a fix, only to discover there's no way to unclog the nozzle or get a new one (assuming you discount Chinese sellers at…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
Just a small holder for the nozzles of the 858D, which can be attached with an M3 screw on the left side of the station.
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
this is my model of the feyenoord logo. i made some changes so you can print it with 1 nozzle. if you print this in prusa slicer and make color changes on high you can print full color with 1 nozzle. tips for the slicer. 0,2 mm the width…
Wydruk około 8,49 €–10,38 € nettoWstępna wycena jednego wariantu
Habe nach dem Update auf MK3.5 zum testen der Stock werte von Prusa mal eine PA test gemacht für PLA und 0.6 Nozzel. Im Prusa Slicer sind für PLA in allen Profilen 0.02 drinnen und bei PETG 0.025. Das ist schon sehr Pauschal. Bei ABS…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Make sure to print with supports. Built with a 2in circle on the bottom that fits into my humidifier. Separate file with no base, add your own that fits onto your humidifier. Note: You may want to drill out the nose holes to be a little…
Wydruk około 7,91 €–9,66 € nettoWstępna wycena jednego wariantu
I've been experimenting with Prusa Slicers' Fuzzy Skin setting. I wanted to better visualize how adjusting thickness vs point distance affects the look and feel of the print. I chose domes displaying the fuzzy setting, with a partial part…
Wydruk około 1,23 €–1,51 € nettoWstępna wycena jednego wariantu
A simple nozzle tray to hold the .25, .4, and .8 MK4 nozzles. Optimized to attach with M3x8 screws on the left side in the original PRUSA enclosure. Printed upside down with 0.4 nozzle PETG on the textured metal sheet of a MK4. See GCODE…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Quintet in F Tray-packing puzzle by Stewart Coffin (STC #253) Fit all five pieces into the parallelogram-shaped opening. Quintet in F is one of a series of tray-packing puzzles by Stewart Coffin. It seems impossible at first, but it…
Wydruk około 2,14 €–2,62 € nettoWstępna wycena jednego wariantu
This is a remix of my single frame mount of the E3D Revo Connect modular system. It's a four module inline nozzle holder bracket. It slips into the lower frame of the Prusa Mini/Mini+/MK3/MK3S/MK3S+ and be installed on the left or the…
Wydruk około 0,83 €–1,01 € nettoWstępna wycena jednego wariantu
Zum Valentinstag bekommt meine Frau etwas zum spielen. Ein kleines Puzzle :-) Ich habe das Puzzle mit der MMU gedruckt. Der gcode ist für die MMU. Wenn Ihr ohne drucken wollt, nehmt ihr die stl-Datei. Im Prusa Slicer dann auf das Objekt…
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
Magnet of the mascot for the University of Missouri/Mizzou. Designed to use 2 small 6mm x 3mm magnets. Two different designs have been uploaded. One with a gold border and one without. G-CODE has 2 layer pauses: 3.8mm: add magnets 6.2mm:…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
I adjusted the tolerances of the original model as well as tweaked some thicknesses in order to improve the printability on the .3mm setting. Tolerances were previously: 4.6mm model thickness, 5 mm slots, .4mm gap between “wells".…
Wydruk około 4,04 €–4,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Laundry detergent nozzle attachment, designed to make dispensing laundry detergent and fabric softener more convenient. Print each piece separately, then assemble the lever, base, and axle. Place the device over the nozzle and secure in…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena jednego wariantu
1.- Introduction: In the 80s I was exposed to this puzzle formed out of wood, that with the years it got broken. (wood that got deteriorated and a friend that tried to solve it broke two of the pieces of it) Today you can find this wooden…
Wydruk około 1,56 €–1,91 € nettoWstępna wycena jednego wariantu
A joke that I've spent too much time on: One of my airsoft teammates loves watching the hottest trends in the real “tacticool” shooting and considering the choice of a muzzle device, often kept repeating, that the best type ever is the…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I prepared two file variants. A version without a silicone sock and a version with. There is no difference in size, only text labels are added as modifiers directly in the PrusaSlicer. Feel free to change it as you need.
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Nozzle Box for EVO nozzles. Made in PETG. Storage space for 7 Nozzles.
Wydruk około 2,54 €–3,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Chouette Puzzle 3D A réalisé avec du PLA Bois de préférence pour un meilleur rendu. Dimension de l'objet 126x100 mm Ep 25 mm
Wydruk około 7,40 €–9,05 € nettoWstępna wycena jednego wariantu
Reverse engineered the original design so a STEP file is added.
Wydruk około 1,79 €–2,19 € nettoWstępna wycena jednego wariantu
Notizzettel Box für 9cmx9cm Notizzettel Note box for 9cmx9cm notespapers
Wydruk około 4,71 €–5,76 € nettoWstępna wycena jednego wariantu
