Liczymy pasujące modele…
There are two versions: one that goes from 4 to 36mm in 2mm steps and one that does that only to 20mm and from there on in 5mm steps - because most metric screws are available in 5mm steps above 20mm. It has a M5 printed thread where you…
A giant-scale version of the LEGO Flower "Plate 1 x 1 with 5 petals” (24866) piece from 2018, intended for use on the popular Giant LEGO Wreath . Interior diameter of the fitment is 30.0 mm; the same as the basic 1x1 stud piece. Redrawn…
This bin follows the design of the original Gridfinity basic bin. However the internal space extends down into that space normally reserved for the magnets. I've exported several sizes but if there's something that you would like to tweak…
These are 2-, 4-, 6-, and 8-stack versions of the HSW 211x248 wall panel. Print at 0.28 layer height with 5+ perimeters to avoid infill. There is a one-layer separation between each panel. Import the STEP file to your slicer, split the…
This was inspired by Zack Freedman's Gridfinity project. My take on a Micro SD card holder for Gridfinity. I created using Onshape . Added step file for easy changes.
Trimmed version of Gdschaf border to fit the Honeycomb storage wall 211 x 248 panel, which is about the largest panel you can print on a Bambu Labs printer.
Update (08.12.2023): I reworked these models to meet the correct Gridfinity Specs. I based the first version on this model: https://www.printables.com/de/model/399759-actually-parametric-gridfinity-base-grid-bins , which sadly does not…
This is probably the first fully printable case mod for the P1P (maybe). Important Update: 23.01.2023. Printing these Files is complicated. ABS/ASA/PETG all failed because of Warping, the parts are to thin and large. Even with my X1C i…
There is an updated bin design which has latching lids available at the links below (under “Other Stuff”). The version here does not latch closed (it was never intended to have that function, and only has a tab). Update - 2/20/2026: If…
1x1x1x1. with extra parts to make Forsaken 1x1x1x1. Print in PETG with tree supports for best results (In my opinion). UPD 1/13/26: Remade face to be more accurate. Added old face to Extra parts. Added full Forsaken version parts. UPD…
Update (08.12.2023): I reworked these models to meet the correct Gridfinity Specs. I based the first version on this model: https://www.printables.com/de/model/399759-actually-parametric-gridfinity-base-grid-bins , which sadly does not…
Replacement frames for Gira System 55. You can choose from single outlet to 5x outlet frames. All my original frames and plates (white) are breaking after 15 years, so i decided to CAD and print them, adding some design improvements…
Toy Binoculars for Kids Coudln't find any good toy binoculars with eye spacing that worked for kids, so I made my own. I copied some aspects of a few different binocular designs I found out there. I modeled the support piece in already.…
OpenSCAD model to build a 1x1 lid for gridfinity storage. From the model you can see the dimensions of the gridfinity base, and that the model is trimmed all around by 0.25mm within the 42mm grid.
This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 21x21 mm HGLRC M100-5883 GPS module on a SpeedyBee Mario 5 frame. GPS mount with GoPro v2: better fit and easier…
Gridfinity 1x2 bit holder I used a 0.2mm layer height with a 0.4mm nozzle. Included is the f3d file Included is a height extender (stl + f3d) if you want to stack two units.
It's a simple 7 card holder based on Gridfinity. All the cards are easy to take in/out, which was my main design goal. #gridfinity
1x1 Gridfinity 9 SD + 4 MicroSD Card Holder for storing memory cards. I couldn't find one that was quite the size and shape I wanted, so just made my own. Found this useful stacked on top of another simple 1x1 bin in my drawer.
This will hold anything with a diameter ≤ 27 mm and height ≥ 36 mm in a 1x1 gridfinity square. For example, an Elmer's washable school glue stick fits really nicely! This was inspired by the other model but: taller to handle the stick…
A border I created using Xander's OpenSCAD file for my HSW. Hopefully, it might save someone else the trouble of finding the best design. It suits wall-honeycomb-k1-211x201.stl for 220x220 size bed such as my Ender 3 S1. Print as many…
Small desk organizer (1x3 Gridfinity base) to hold pens and related desk paraphernalia: mine holds a pair of scissors, a bunch of pens, nail file, box cutter, and a couple of small picks and screwdriver tools. Reorganizing my desk and…
This module, for 4 Nozzle Wipers , works with in conjunction first introduced with the Multi-Modular Storage System -MMSS. It works on the current printers: P1P, P1S and X1C. Pre-made modules, here there are several, and many are…
Gridfinity compliant 1x1x3 block with 7.9 mm gap between each card for ease of access. No holes for magnets, my printer isn't dialed in enough to do those holes, so my entire Gridfinity collection is without.
18650 battery holder 1x4 4S1P. Remixed from : https://www.thingiverse.com/thing:4700523
Gridfinity AAA Battery 1x1x3 or 2x1x3 created using Onshape adjusted battery diamenter. Added step files for easy changes.
Remix of OV1A creation. Liked the snap fit and clean design.
I tried to generate all combinations i could fit on my Bambu. Magnets have a tolerance of 6.20, which works perfectly when printing the bins with a 0.6mm nozzle. Scoop A Scoop is the rounded ramp inside the bins. The position of the scoop…
This is a simple, modular drawer organizer for the Ikea Galant file drawer units. This thing is the 1x2 organizer that is 1/2th the width of the drawer. Print 2 of these to fill one row across the drawer - or mix and match with the 1x1…
1x a day version of Pill Box 2x a day Weekly pill box. Compartments for up to two times per day. Print instructions Category: Organization Summary 1x a day version of Pill Box 2x a day Weekly pill box. Compartments for up to two times per…
I found the full-size vase mode bins to be too tall and hard to reach the screws so I designed a shorter one including a place to put labels. These work great for things like screws and nuts. There are two magnet holes that are optional…
This is my SD-Card storage solution i designed using this Gridfinity Addin for Fusion360 . It can store up to 13 SD-Cards, and 9 Micro SD-Cards. The bin has little grooves on the inside, so the lid snaps in place and stays on. V11 Update…
Update - 2/20/2026: If you care about the future of 3D printing… Please inform yourself about the legislation which is currently being considered in Washington, California, New York and Colorado, and will restrict and regulate 3D…
This was inspired by Zack Freedman's Gridfinity project. My take on a USB-A & USB-C holder for Gridfinity. I created using Onshape . Added step files for easy changes.
I have revised the model of “morenostefanuto” to be 3D-printable. Need to mention that I am not a “Andromeda Fan” or “Trekki” but this Andromeda Ascendant model is really huge and looks really fantastic. The dimensions are: length: ca. 50…
A simple holder for 1x4 sized coffee filters. Best printed with the longest edge facing the bed.
Do you like Gridfinity? Like Storing Stuff? Hate Bland Designs? Try this Scifi-looking Gridfinity 1x2 Storage Box!
UPDATE Version 3.1: updated the fillet on the inside of the small squares to make grabbing screws easier. Version 3.0: I have included 2 models that use a 63 slot grid for ultra small magnets. One of the 2x2 trays has the grid embedded if…
Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini with an VL53L1X / TOF400C sensor and keep the whole thing as small and modular as possible. Later on, the project will be used with ESPHome and…
This is a 1x1 Gridfinity container used to store a single pair of side cutters and a single pair of tweezers. The side cutters shown in the picture and used to model the slot within this container can be found here . This model was…
Honeycomb Storage Wall 211x201 that you can print in stacks. important to print it with outside up and with ironing enable on all top surfaces. I recommend to print the test file first to see if the print settings is good. After print,…
Gridfinity 1x1 5U height. The v2 version has a slightly improved tighter tolerances and an updated design (chamfers to easily slide in)
This is a remix of idenny1's Gridfinity 1x1x3 micro SD card holder. I've removed half of the microSD card slots to make this a combination bin and micro SD card holder.
I designed this hex bit holder as none were quite how I wanted them. This organizer holds a total 16 Hex-Bits. I also designed a 1x2 Gridfinity 32 Hex-bit Holder that can be found here! Has holes for magnets and can be stacked on top of…
Face was Painted with Acrylic Paint And clear coated. 118mm x 80mm 5 Pieces Super Glue Required STEP 1: Add Glue, and line up then secure in Place. STEP 2: Add Face, then secure with glue. FINAL PART: add head, then secure with glue 95%…
Made in TinkerCAD, no fancy fillets for rounding to accommodate any 9v standard size despite edge rounding. Tested with batteries that were wrapped in plastic and still had space to place without issue, but not too loose.
2025.08.26: Added 1x2 bin divider versions for when you need to store longer objects. 2024.12.13: Added a STEP folder in the file section containing models of each version in case you need to modify one of these for your custom bins.…
A set of organizers for Dremel paraphernalia. I use them to organize my dremel's bits and bobs on the tiered gridfinity base plate .
obscure technic 1x15 with perpendicular holes. was missing from my AT AT and I didnt want to wait on shipping Print Settings Printer Brand: Anycubic Printer: Kobra **Rafts:** No Supports: No **Resolution:** .1 Infill: 100% **Filament:**…
Custom shallow-depth bin for Multiboard (http://multiboard.io). Using this one to conveniently hold small tools like a Leatherman multitool. Could use some iterating but will work until there are official 0.5 depth bins in the system.…
This module, for 4 microSD's , works with in conjunction first introduced with the Multi-Modular Storage System -MMSS. It works on the current printers: P1P, P1S and X1C. You can see in the context, with the specially designed MMSS case ……
Tikka T1x Cheek Riser. Mount with 2 sided tape.
I downloaded and printed the sd card holder from "mmurase00". Then I figured out that the print can cause that sd card (micro and general sd as well) could either fall out of the slot or you have so much resistance that you run a high…
UPDATE: I have created screw bin holders in 2x2 grid sizes for plates and other bigger parts as per my field research data. I’ve also created 1x1 lids for the screw bins! The big parts tray has 3 xrta small slots, 2 small slots, one…
Design description I needed a 6x1 bin and couldn't immediately find one. My print-bed is large enough to print it diagonally, so I didn't want to deal with sideless bins and simple created one myself. This has a height of ⅔, stackable…
I found the full-size vase mode bins to be too tall and hard to reach the screws so I designed a shorter one including a place to put labels. These work great for things like screws and nuts. There are two magnet holes that are optional…
Simple 1x2 gridfinity block, had two D batteries that needed a home, no holes on bottom, simple / fast print
This is a remix of the Apple Watch Charger Stand from Mate0126 and the Gridfinity Block template from Filip Kolinsky. This is part of my EDC / Dresser Valet series that I'm creating. If you're not familiar with the Gridfinity system from…
A 1x3 Gridfinity unit for storing your Flipper Zero.
🧱Lego Duplo Brick 1x2x2 #76371🧱 RICORDATI CHE OGNI PERIODO DI GIORNI PUBBLICHIAMO I NUOVI PROGETTI (ANCHE LEGO) QUINDI ISCRITIVI,👤 SCARICA⬇ E LASCIA UN LIKE👍. REMEMBER THAT EVERY PERIOD OF DAYS WE PUBLISH NEW PROJECTS (ALSO LEGO) THEN…
Simple 1x1 size Gridfinity container to store 8x CR2032 and 3x CR2430 Batteries Printed with: 0.6mm Nozzle 0.30mm Layer height 15% Infill
Based off of Marius' design but with a 1x1 footprint. Marius' design was remixed from a desk organizer from DRDflow. Each slot holds either : 3 micro SD 1 regular SD 1 USB A 2 USB C (may collide with walls if the device is too large) This…
Terminal Halter für Wago Klemmen im 2x design für 12V/24V Verkabelung. Da ich nur Stehende Exemplare gefunden habe hier mal eine flache, liegende Variante. Die Halter sind recht eng in der Toleranz und klemmen bei mir recht gut, ist es…
The most common modular concrete fence in the USSR and Russia, which became a visual symbol and brought fame to its author - Boris Lakhman. File in scale 1:100. Print instructions Supports: No Resolution: 0.2 Infill: 30 Notes: For greater…
Tikka T1x is a great rimfire rifle, but the bolt handle is slick and small. When I run bolt faster - my fingers tend to slip off the handle from time to time. I designed a knob that fits on top of the stock bolt handle and allows a better…
18650 battery holder in 1x6 configuration. Remix from : https://www.thingiverse.com/thing:4700523
Gridfinity is life, gridfinity is power. I'm converting my office “quick grab stuff” cupboard to gridfinity, which means I needed a holder for my AirPods Pro case. Other airpods gridfinity options exist, but they typically mount the case…
Extended version of @KYZ_446301's medium sized knife holder.
This is the “timeless” 1x1x1x1 skin from the asymmetrical horror game forsaken. Print this model in PETG for longest lasting joints, but you can print in PLA if you are okay if they loosen over time. You can paint this model if you want…
This gridfinity part is made to store this set of heat-set Insert tips: https://www.amazon.com/dp/B09VL41T7K?psc=1&ref=ppx_yo2ov_dt_b_product_details It comes label with exact sizes for each tip. Feb 27th 2023 Update: I added a v4 version…
remixed internal dim's H=21mm L=60mm W=40mm
This bin organizes my whole cable collection if you guys can see from the photos I use lots of USB Cables and keeping them organize was a challenge until now with this grifinity usb organizer I can pick i cable within seconds no thumbling…
CaseOh figure, but like a 1x1 Lego piece
Gridfinity (1x2 and 1x3) holder for 1/4 inch hex bits. Inclined design to fit into a tool chest drawer. 14/10/2023: 7 and 8 slots versions. 25/10/2023: Adding a 1x3 version with 12 slots. 08/12/2023: Adding a 2x3 version with 12 slots for…
Made for the 1/4 in. Drive SAE & Metric High Visibility Socket Set, 21 Piece sold by Harbor Freight. If you’re looking for a socket wrench storage solution, check out…
For an alternative design, or a different storage capacity, please check this design: https://www.printables.com/model/1326070-15-ml-falcon-tube-holder-4x-6x-8x-10x For 50 mL tubes, please check this model:…
I liked the ideas for Gridfinity credit card holders that were already posted, but I had a slightly different use case, i.e., a shallower drawer, and felt it could hold more to maximize storage space. I don't use a magnet system, so I…
LEGO 1x1 Plate Vertical Clip, part # 2555
Simple bin for the P1P hotend with heater and fan Gridfinity by Zack Freedman: https://www.youtube.com/watch?v=ra_9zU-mnl8 gridfinity Category: Tool Holders & Boxes
Gridfinity is a storage and organizer system introduced by YouTuber Zack Freedman in this video. In this video, he outlines the specifications, with a good bit of documentation of the Gridfinity standard published on http://Printables.com…
This is taking SamHain07's dovtail style socket rail and slap in onto gridfinity 1x5 baseplate. I have included 1/4 and 3/8 sized socket holders.. I do not use 1/2 sized socket so can't test the fit for that size. If you use 1/2 sized…
This is a bin compatible with ZackFreedman’s Gridfinity . Designs are available for both vase mode printing and solid printing. Notes: The minimum vase mode printing settings use a 0.4 mm nozzle with an outer wall width of 0.6 mm. In my…
Holder for 1, 3, 4, 5 or 6 falcon tubes (50 mL). For 15 mL tubes, please check this model: https://www.printables.com/model/501923-15-ml-falcon-tube-holder-1x-3x-6x or this one…
Gridfinity bin for Dremel It has a 1x2 bin footprint. Used for Dremel spanner, chucks and standard 3.15mm (1/8") tools. I really needed a bin with both spanner and tools, and figured I'm not alone. There's no lip on the bin since You…
I remixed Robo's https://www.printables.com/model/309548-gridfinity-bic-lighter-tray Bic Lighter Tray to fit the top of the BIC lighter more snug. Nozzle: 0.4 or 0.6 (tested with both) Layer height: 0.2mm layer height Infill: 10% minimum
Remix of the Bambu Lab X1C plate holder to work with Gridfinity. Uses 1x7 grid spacing and has magnet holes
Risers to raise Gridfinity bins up above the baseplate. Useful if you have a bunch of random height bins, but you want them to sit flush on top. Uses standard 6x2mm magnets (press fit). All risers are 1x1, with heights from 1U up to 8U.…
I have bought a couple of sonoff zigbee sensor (SONOFF SNZB-02) after some aqara sensor start failing, but differently from the latest they use the CR2450 batteries instead of the more common CR2032 I search printables and thangs for a…
here's a simmple gridfinity bin
I modeled some Gridfinity bins which will allow magnets to be press-fitted. I added an internal ramp like I've had in some bins I've downloaded in the past which is very helpful in getting small parts out of the bottom of the bin. Keeping…
Fixed for printing (original: https://printabrick.org/bricks/2431 ) Print instructions Category: Construction Toys
We all love additive manufacturing (aka 3d printing) because it creates so little waste. But what should I say. At least there is one subtractive process where the waste can be processed further. Cookie dough + cookie cutters ;-) The…
This is a LEGO Round Flat Tile 1X1 (3 tiles = brick). The tile is similar to the tile 4646844, but it does not need to be white.
I found the full-size vase mode bins to be too tall and hard to reach the screws so I designed a shorter one including a place to put labels. This longer one works great for screws or hot glue sticks. There are optional magnet holes with…
A remix of atucom's deburring tool to fit the cheap AliExpress deburring tool, which is 22mm. I had to sacrifice 2 blades to make it fit. Also, I made the holes bigger, because they didn't work properly when printing with a 0.8mm nozzle…
T-Nuts Holder for 11 wrenches for ikea skadis pegboards. Part 1 is for 5 wrenches / 22-32 Part 2 is for 6 wrenches / 6-16 What you need: 4x and 3x M2 T-Nut , M2 nuts and M2 12mm screws are needed for mounting. The holder uses the T-Nuts…
I made a 6u height Gridfinity Storage Box by Pred (now parametric) https://www.printables.com/model/543553-gridfinity-storage-box-by-pred-now-parametric/files for all my small electronic components. This jumper wire holder was made using…
![[OUTDATED] Forsaken timeless 1x1x1x1 articulated figure](https://media.printables.com/media/prints/1f7cd024-3b60-4de0-b1ac-97475a00bd73/images/10975212_0ba469e9-05d3-4f08-bf9f-b8bc64e6b6f0_b076447e-f4ab-4c5a-8906-26a3108a3853/screenshot-2025-10-22-150853.png)
