Liczymy pasujące modele…
🛠 3D Printable Parts for 40x40 Extruded Aluminum Mount You can 3D print M5 nuts and bolts for use with 40x40 extruded aluminum using the models below: 🔩 M5 Drop-In T-Nut 📎 https://www.prusaprinters.org/prints/3246-m5-drop-in-t-nut 🔧 M5…
A Native American drone flute in F# tuned to A = 432hz I noticed there were only a few drone flute files available online and I wasn't quite happy with the quality of them so I took it upon myself to design one that I was happy with. It…
F32H32. Is smaller than osVAC-original. I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis auf die immer aktuellste Version ist hier:…
Click here for 3hatch type / 4batteries included https://www.printables.com/model/315831-missile-pod-style-battery-holder-aaaaa-3hatch-type Click here for the improved Version 2.0 with easier assembly, pre-configured 3MF profiles, and…
I just modded the XY Joiner for the Gantry to fit MGN12H Rails instead of MGN9C. WHY? Cause i don't have 9C Linear Rails in stock :) Just the lower part has to be changed, upper joiners still stock. Print Settings Supports: No Resolution:…
EVA3 dropped support for MGN12H and here I am adding it back in! Keep an eye out on www.3dpandme.com for full installation pictures and content. BOM: 4 x M3 inserts Support me by buying your dragon hotend (or any other 3d printer…
this can be used on the Trident This Requires 2 M3 heat inserts in the Key to work properly. 3 M2 heat inserts for the pcb Klicky version This a Mount for the Voron Dragon Burner on a MGN12H. Can be used on any printer with the belts on…
Useful print to have when washing MGN12H carriage blocks in IPA in an ultrasonic bath or when you want to thoroughly clean/lubricate your linear rails without accidentally knocking the carriage off and having to pick up all the little…
I integrated a slip ring into M32H32. Ich habe in den M32H32 einen Drehring eingebaut. I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis…
Just remodeled the Voron Trident Z Carriages to fit MGN12H Rails, as i'm reusing some old parts for my build. Please NOTE THAT, Positions are all the same, nothing changes. As MGN12H Carriages are wider than your extrusion, you should use…
These linear rail MGN12 and the block MGN12H objects with exact dimensions, are intended as help tools in prototyping and designing. There are 2 types of rails, one without holes, that can be elongated/stretched to any desired length by…
::edits again:: So I've come across a much more elegant solution for the Orbiter 2 mounting setup @ https://github.com/elcrni/Voron-Mods/tree/main/Orbiter_2.0_SB_CW2_Enclosed I recommend this over the one in here. So skip the orbiter…
Set 0 botton and top layers Infill: Honeycomb, I used 25%
Tested on SE. Fits KE. Updated V4 with spot to attach your Input Shape Sensor (WARNING: this mod is not meant for beginners. Nothing wrong with being one but you might be over your head with this one. I am an experienced Machinist and…
Top for EVA 3 MGN12H instead MGN12C. For sensorless homing.
This mount is made to accept a dragonburner/mini stealthburne for ender 3 neo printer with linear rail in the x axis. Print with minimum 4 wall and +40/50 infill you can go 100%. Height of cr-touch can be changed when you want . Made an…
It's my take of linear rail kit I've designed for my Anycubic Vyper. The kit includes the left and right MGN12H mounts that replace the V-roller bearings and original Y-axis endstop mount for 2020 extrusion. [UPDATE] Through some changes…
This remix allows you to easily mount an Eddy probe on a Dragonburner toolhead. I used Chirpy's 'Carriage_Base_Short' as the base for this design, making adjustments to fit the probe securely. It keeps the probe at an optimal distance for…
My take on the Duender by Sergei Irbis. This version uses MGN12 linear rails with H size bearing blocks and adds mounting points to use end stops if you prefer those to sensorless homing. For the configuration I used, you will need the…
You'll need four M5x12 and eight M3x6 for the linear rail block (M3x8 might work too, not sure) To install it, partially screw in the screw into the hex nut (use the stock ones) to lift the nut, and place the mount over the rail block…
Print model IO shield for Gigabyte GA-B320M-S2H
******************************** Update: I've added a cut out to mount an end stop as I personally need one and I like having the option available for others :) ********************************* This is a remix of Gulsifer's wonderful…
CR-6 SE Y-axis Linear rail and MGN12H carriage mount This conversion method DOES require you to replace the Y-axis belt, but unlike some other projects doesn't require you to cut the rail. Required Supplies: 2x 350mm long MGN rail with…
It started by finding the original model of the “ Heat Insert Press ” by BaGooN, which I really like! since I still have some iglidur i150 filament lying around, I thought, hey why don't print the rail and the carriage by myself? but the…
UPDATE - Included new (untested rear plate). I wasn't very happy with the clamp version to hold the belt. This is more HeroMe-ish. If you try it out, please let me know how it works. I have one ready to test but I just haven't had the…
Just a remix to be able screw RPi to frame using tnuts.
I didn't want to buy limit switch PCBs, so I designed an upper mount with an inbuilt limit switch
I wanted a design to fit an MGN12H rail that I have on my custom printer so I thought I'd alter the existing top on EVA 3 to accommodate both MGN12C and MGN12H
Remixed backplate to add extra strength, holes for nylock m3 nuts, and flush cap head screws for the linear rail.
Replace the V-Slot-Rollers on your Sovol SV05 with MGN12H linear rails using these adapters. The belt tension on the Y axis will increase slightly with this mod, but this shouldn't be an issue. You will need some additional hardware to…
Another Air purifier which should be used with some additional active carbon It can be used in 2 ways: Print only upper part, insert 6x3mm magnets and snap it on exisitng filtration fan Print everything and make a closed loop ventilation…
Minimal print area loose. No end stop adjusting... This project is based on SK-Tank CF BMG Dual 5015s Mount by declinox. https://thingiverse.com/thing:5182358 ) I find his design while looking a project for “MGN12H rail system, BMG…
Stückliste: Linsenkopfschrauben oder Zyl. Für den Halter 2x M5x8 Für den Schlitten 4x M3x6 Für die Winkel 6x M3x8 Für die Winkel 6x M3x14 Einschmelzmuttern 7x M3s Einschmelzmuttern 2x M5s Linearführung MGN12H…
This is a printed adapter to mount the Micro Swiss Direct Drive Extruder for Ender 5 on a MGN12h linear rail carriage that utilizes the CoreXY belt configuration on the Mercury One.1, Voron 2.4r2 and maybe others. When doing the build,…
required hardware: 4pcs FHCS M3 5mm 4pcs M3 square nut (5,5mm x 5,5mm x 2mm) Zen3D
IMPORTANT PRINTING INFO Follow the screenshot for part orientations. No supports required for anything. The little block and gasket need to be printed twice each and from TPU For the gasket use 100% infill and “avoid crossing perimeters”…
This allows you to remove the 2 to 1 hose adapter and use a single 4" hose. It has a single hole for the original screw that is used to hold the original adapter in place. I used some thin foam insulation tape to help make the connection…
Instinct MI50 BBQ blower fan shroud JSCAD share link There is a new sticky “Radeon Instinct MI50” thread on mersenneforum.org (registering needed for access): https://www.mersenneforum.org/node/1072920 Used Radeon [pro] vii GPU prices are…
The stopper has a M4 counterhole. Simply mount it on top of the cheap 2020 belt tensioner. Now the carriage can't leave the rail anymore. On the other end of the rail sits the x axis endstop to do the same. The model was designed around…
Build plate is held at 45 degrees on roll and 15 in pitch, so the dripping is faster. No supports when printing. Category: 3D Printer Accessories
MGN12H rear Z carrier for Trident-R1 CHANGELOG 01.05.2023: WobbleX - Opened up the center hole (where the leadscrew goes through) too 13mm to allow for more leadscrew movement without interfering witht he carrier body. 25.04.2023:…
I made this stand for the PS2HDMI adapter so it doesn't hang and put stress on the AV port of the PS2. This stand should work on both the Slim and Fat models. This has a really tight fit, but after putting it and taking it off one time,…
Same as Heat Insert Press by BAGooN but modified to use MGN12H linear rail. This is a compact heat insert press that utilizes a 150mm linear rail with MGN12H block that is avalable on amazon. Follow BAGooN's instuctions as the only…
Mount for the Behringer UMC202HD USB audio interface (maybe works for other models, too). The front plates are hold in place by M4 melting inset nuts. Printed in Devil Design PETG on a Prusa Mini clone.
This is a printed adapter to mount the Micro Swiss Direct Drive Extruder for Ender 5 on a MGN12h linear rail carriage that utilizes the stock belts If you are looking for an adapter using CoreXY belt config, check here:…
English version below! Work in progress! Additional pictures will follow! Wie Besitzer des Acer S242HL vielleicht wissen, hat der Monitor keine Vesa-Befestigung. Deswegen habe ich aufbauend auf der originalen Befestigung einen…
This is a gantry conversion kit for the TronXY X5SA 400. It should work with the other X5SA models however you'll need to adapt the length of the linear rail (450mm for X5SA 400). Check out the installation video here:…
This is a 42HP 3U Eurorack case. The structure is interior. With the high side version it may interfere with some modules at the left and right ends of the rack. A version with low sides is also provided for reduced interference with…
Die Y-Linearhalter sind ein Remix von: https://www.printables.com/pl/model/169489-anycubic-vyper-mgn12h-y-axis-linear-rail-kit?fbclid=IwAR2GCK7LIJAdjURp8Q7YlXN_zA7_29ol_zSFM_jpIRnWyBzvQ_V145M47dc Stückliste: Linearführung MGN12H 2x…
I remixed Chirpy's original MGN12H X Carriage model to add some mount points that interface to the bottom “feet” of Chirpy's PCB Mount for the Sherpa Mini for extra toolhead rigidity.
So the pin that holds the headphones together on the side sheered off and I really didnt want to buy another set of headphones, these have been great for the years Ive had them. A bit of measuring and bam new pin. I did not reuse the clip…
A simple outdoor housing for the Aqara G2H camera. After testing a Aqara camera outside under a awning for a while I wanted a housing so that the camera could be hung at other places as well. Borrowed some parts from Nano Vise V2 by PRIma
Printed with the top (the part with the hole for the fan) on the build plate and tree supports set to only touching build plate. In testing on superposition 1080p high this kept the card about 10c cooler than the triple fan model and…
This is a chess set that I designed years ago to print sequentially ("Complete individual objects" in PrusaSlicer) in order to have an extremely quick print while having no seams due to the spiral vase mode. The set can print in about 2…
This is an add-on for the Creality LD-002r resin printer to help drain the resin from the build plate (and model) after a print. UPDATE: I haven't personally tried it, but others in the comments have said that it also works for the…
Modified X-Carriage for Voron Stealthburner Toolhead Severely bastardized x-carriage for this wonderful Prusa Bear Linear Rail mod by @Thehead Starting parts for the carriage mod came from @Sebastian - I used his carriage he made for the…
Modeled in Fusion 360 Printed in PLA .2mm layer height
Remixed for my Ender 5S1 Mercury One.1 with a 235x235mm bed.
I took design inspiration from the Printer Mods Y-Linear Rail kit. This design fits Creality-style printers that use their heat bed mounting scheme. The gantry frame mounts to the brackets with M5 screws and washers. Mount the brackets to…
Note: This is for the older Ender-3 printers with the flat/z-shaped front Y idler bracket. Here's the mod for the newer style with the U-shaped front Y idler bracket. The original design placed the belt too close to the frame which caused…
Insert holds: M12BLIDRC M12 battery (in my case M12HB2.5) M12TC2 USB charger Small compartment in the back for bit holder or other small parts Remaining space of the organizer is used to store a SHOCKWAVE Set 38pcs (4932492009) or other…
so... back to planes Anyways, here's the B-52H. I mismeasured and the wings ended up a little chunkier than I'd have liked, but it's not abhorrent. It should print with minimal supports, only on the engines and the little antennas along…
Print 1 and 2. The join in the middle is on an angle, to prevent light leaks. The lid itself is quite thin and fits perfectly. File "full" is included just for reference. Category: 3D Printer Accessories
Material: ABS / ASA /PETG Infill: 40% Supports: No Top/Bottom Layers: 4/5 Wall Line Count: 2/3 Italiano: Questo progetto permette di installare il Bl-Touch all'interno del carrello, con una copertura per proteggerlo dal calore English:…
Actualización 22-12-2024: Añadido última versión en formado step. Soportes para guías lineales Eje Z MGN12H de longitud 400mm. Necesario comprar: Guía lineal MGN12H + Carril 400mm (x4 pro) 28 T-nut M3 ( sujeción guía lineal al perfil ) 8…
I reworked the original XOL Toolhead mount to fit on an anycubic vyper or similar printers. I have also added a mount for a BL-Touch. Works for the low XOL-Toolheads like for Phaetus Dragon or Bambu Hotend. Clamps have been fitted to…
I noticed the original Y-limit switch bracket on Ender3/Pro style printers was not appropriately aligned to make contact when mounting linear rails to the extrusion. Additionally, I noticed that I lost about 10mm of print size on the…
See the FilamATrix Github for additional info and other needed modded parts (includes parts to support the EBB SB2209 USB board). See the EBB SB2209 USB GitHub for additional info and other needed modded parts if not using the FilamATrix…
This is a simple casing for the "Adafruit FT232H IO" board. The SCAD files can be downloaded here https://github.com/andimoto/case\_adafruit\_ft232h Assembling the case with 2mm or 2.5mm screws. Print instructions Category: Electronics…
STORE LINK: Shop on BRS Store VCORE 4.1 - 4.0 - 3.0 - 3.1 - 3.2H AWD modules for Vcore ALL Vcore (Non hybrid) Based on the "best seller" product of BRS-ENGINEERING, the BRS-AWD for Vcore 3/3.1, I present you the BRS-AWD V2.1, different…
Design goals: re-use with minimal hardware changes the original parts (except the fans assembly/shroud, see below) minimal number of printed parts extremely simple design of the printed parts Carriage adapter has large (10 mm) sides for…
Ein kleine Stütze für den Analoge2HDMI / ElectronAnalog Adapter von Electron Shepherd für ein Playstation 2 Slim. Hier Speziell für eine SCPH-70004. Verwendet wurden M2,5 Schrauben.
Note: This is for the newer Ender-3 printers with the U-shaped front Y idler bracket. Here's the mod for the older style with the flat/z-shaped front Y idler bracket. The original design placed the belt too close to the frame which caused…
This mod will add a 2020 aluminum extrusion to your Y carriage. This allows you to mount your rail onto the extrusion and will give additional support to your Y carriage. Needed Hardware 1 150mm 2020 Aluminum Extrusion (for normal size…
The original author of these files uploaded a STEP file which required isolating the mount then saving each component as an STL. I have done the work for you.
Adapted SimpleCore XY to use MGN12H
Prusa Bear Linear Rail MGN12H Voron Tap X-Carriage Modified Voron Tap MGN12 carriage to work on Prusa Bear Linear Rail mod by @Thehead Voron Tap >> https://github.com/VoronDesign/Voron-Tap Integrated belt tensioner by @humebeam…
It combines Xol monolith carriage with dragonburner mount. For MGN12H block and 9mm belts. Added more screws to secure belt clips. WARNING: The middle screw should be the same level as the top and bottom screws; if not, the worst…
A endstop for 2020 Profiles. Designed for collision with the carriage.
Pebble 2/2HR Replacement Button Kit This comprehensive button replacement kit solves the notorious button degradation issue affecting Pebble 2 and Pebble 2 HR smartwatches. The design features a dual-material approach for optimal…
Tool used to center MGN9H rail on a 20mm wide piece of aluminum extrusion while fastening it down as seen in the following video: In this episode, I assemble the X gantry with the newly designed MultiJet Fusion printed parts, and install…
In adapting the Eva 3.0 toolhead for my Ender 5 I needed to adapt it for a fixed endstop sensor on the right side and to fit my MGN12H rails. This model removes the endstop mounts from the left and adds a bumper on the other side. The…
A 24mm high spacer to fit into the Dell S3222HG monitor's recessed VESA mount so that larger VESA plates/rails can be used. Its overall dimensions are 121 x 121 x 24mm. Make sure to use the appropriate length screws to prevent damaging…
I made this model to align my cheap USB cameras for stereo imaging. It's press fit for the PCB, and enough space to add some glue to fix the cables. Distance of the cameras is 35mm. I'll add a cover plate later maybe with a strain relief.…
THIS IS THE OLD VERSION. WITH A 42MM vertical spacing A new version has 36.373mm spacing that better matches the Hex spacing that is called GOEWS GRID. A Square configuration of the GOEWS system. 42mm spacing vertically and horizontally…
I have made core XY MGN12 3D Printer. Printer dimension of 440X400X600 and Printing dimension of 200X200X300. Print instructions Category: 3D Printers Summary I have made core XY MGN12 3D Printer. Printer dimension of 440X400X600 and…
Hello, Here is small and easy project of Behringer U-Phoria UMC202HD mount. You can put your Audio IF under your table and… stable. In my case printed with PLA.
Here is a bracket i designed for converting my CR10 Max to linear rails on the Y axis. No modification to the bed is needed! The bracket uses alignment tabs on the six big holes on the bed (three on each side) You will need to source six…
After adding MGN12H linear rails, the limit switch on the X axis has to be 8mm higher. That means, that the stock stepper pulley cover has to me removed to make more room for a custom limit switch adapter. Pulley Cover : I created two…
Mega Mods Collection for the Voron Trident R2 (Everything already tested and safe to print and use) Since I always heavily modify my Voron printers, I've decided to upload all of the R2 mods I've designed so far in one package. Every…
Edit: added zero-g diffuser for the cowl with the logo. based on the voron diffuser, all measurements match. printed and tested, let me know if there's any issues and I'll fix asap.…
A box I designed for L23UGSR-5HaxD2HaxD Routerboard. Has 1 open side for air ventilation. Uses M3 bolt to hold the board (M3x6-M3x14) will work. Has mounting points on the backside, which use M4 screws with max ~7mm diameter of the head.…
This base gives Aqara G2H some ground clearance to give it a better view from a window, guarding that beloved Weber on your porch. Wire can be routed through the holes and the foot slips snugly into the base. Print settings: the base was…
Dichtring VAT Tank LD002H creality Mir ist der Dichtring vom VAT Tank kaputt gegangen da habe ich diesen gezeichnet und gedruckt mit TPU A95 und Raft, dieser passt sicher auch in ähnliche Tanks Durchmesser ca. 145 mm Sealing ring VAT Tank…
I'm currently running a Stealthburner and an X-axis linear rail on my Ender3V2. But I was tired of losing bed space to an ADXL-mounted CR Touch. This is my solution. I've remixed prasadp4009's CR-Touch Switchwire mount to print better (no…
CR6 Linear Rail Hotend adapter Project under development! I'm working on some adapters that might make is easy to mount the stock hot end onto linear rail using an MGN12H carriage. Mounting the rail on the front of the x-axis does move…
Use M3 heat inserts Ready to use chains Bltouch support offsets X -21 Y -40 5015 blower fan some supports for zip ties
Remix of ultimate X axis upgrade for MGN12H instead of 15.
This is a modification I came up with for my CoreBot V2 printer to convert the linear motion system from Rollers to MGN12H linear rails. I also added a (somewhat) quick-change system for the tool head as well as support for the E3D Hemera…
About I bought this cheap little camera figuring I could either make a box and mount for it, or someone else would have one ready. I didn't see any options I liked that were pre-made, so I came up with this. Uses standard action camera…
