P
Printablesthall72
Lego Compatible (32000.dat) Technic Brick 1 x 2 with Holes
This model is compatible with the lego system.
- Pobrania
- 1091
- Polubienia
- 56
- Ocena
- 4,25
Wyniki wyszukiwania: 3200
Liczymy pasujące modele…
P
Printablesthall72
Lego Compatible (32009.dat) Technic Beam 3 x 3.8 x 7 Liftarm Bent 45 Double
This model is compatible with the lego system.
- Pobrania
- 713
- Polubienia
- 50
- Ocena
- 5
P
Printablesgoju
Wall mount for Bosch ebike Battery Charger 2A BPC3200
Compact wall mount for Bosch ebike battery charger 2A BPC3200 with holder for both plugs and routing of the power cable on the rear side. Due to the edge on the underside, the print is made at an angle, which leads to better layer guidance.
- Pobrania
- 543
- Polubienia
- 31
- Ocena
- 5
P
PrintablesMr_D
Philips 2200 - 3200 2cm extra
Make of bean holder for Philips printables does not allow non-commercial license org model thing:5401987
- Pobrania
- 531
- Polubienia
- 44
- Ocena
- 5
P
Printablestangcla
Sony XAV-AX3200 and XAV-AX5000 double-DIN bezel fascia trim
I needed a larger bezel for my car as it has two single DIN frames (rather than a double DIN). I made this with a larger bottom edge to hide the gap, it fits snugly around the AX1000, AX3000/AX3200 and AX5000 screen. I curved it to match…
- Pobrania
- 235
- Polubienia
- 7
- Ocena
- 0
P
PrintablesDragoMej
DTF Epson I3200 Printhead Cleaning Station
DTF Epson I3200 Printhead Cleaning Station. Printed in two parts. You can modify upper part if you need for different type of printhead. On places that cover connectors I put cover cut of heat shrink tubing. It is tight fit.
- Pobrania
- 195
- Polubienia
- 12
- Ocena
- 0
P
PrintablesTechNerd
Cullmann Video 3200 Tripod Plate
I made a sturdy tripod plate for my old Cullmann Video 3200 tripod. It's almost like the original plate but without the pin. Use a ¼" photo screw and a washer. I've added also the Fusion360 project and the STEP file in case you have to…
- Pobrania
- 121
- Polubienia
- 14
- Ocena
- 0
P
PrintablesGabriel Ferreira
PHILIPS 3200 Series Fully Automatic Espresso Machine - Anti vibration feet
Remix from https://www.printables.com/model/163295-philips-ep2231-anti-vibration-feet because series 3200 seems a bit heavier. I suggest printing using PETG for strength, with the opening at the z-axis and support.
- Pobrania
- 112
- Polubienia
- 11
- Ocena
- 5
P
Printablesatform
Tapered Roller Bearings - 32005/32007
Functional tapered Roller Bearings in dimensions 35/62/18mm (32007) and 25/47/15mm (32005). You need 18 rolls for one bearing. I have printed the bearings in PETG without supports. For assembly you have to squezze all rolls between cage…
- Pobrania
- 107
- Polubienia
- 21
- Ocena
- 5
P
PrintablesRicky Li
3200 SAGE fly fishing reel Clicker
I bought this original old-school reel very cheaply because some parts were missing, and I loved it. I drew the spare part for the click mechanism because it often breaks. I printed it in PLA, PETG, and ABS. I know the model is correct…
- Pobrania
- 99
- Polubienia
- 17
- Ocena
- 0
P
PrintablesChristophe-P
Philips 3200 Series Espresso Machine little helper
modifié pour l'extension du bac à grains soit plaquée correctement comme sur la deuxième photo n'oubliez pas de poster vos photos de vos prints ça fait toujours plaisir !
- Pobrania
- 94
- Polubienia
- 13
- Ocena
- 5
P
PrintablesMrPlane
ACA Quadren Q-3200
Model Siren. Model is now fixed and hopefully won't use too much supports.
- Pobrania
- 93
- Polubienia
- 7
- Ocena
- 5
P
PrintablesJorx
Toniebox CC3200 debug adapter positioning aid
To access the debug port of a CC3200 Toniebox PCB, you can use some specialized adapters, soldering skills or - and this is something many of us will have - acupuncture needles. In order to easier position the needles (1/20" spacing…) and…
- Pobrania
- 81
- Polubienia
- 2
- Ocena
- 0
P
Printablestcies
Lego Technic Liftarm 32009 Organizer
I've been frustrated for a while for how unhandy it is to store the Lego Technic 32009 Liftarms: So I created this organizer, which saves around a factor of 2 of space!: Furthermore: One side is open, so you can directly find any color…
- Pobrania
- 70
- Polubienia
- 29
- Ocena
- 5
P
PrintablesBha
Xcortech X3200 MK3 - BB catcher
Everytime i want test the FPS of my airsoft replica the bbs fly thru my office. Thats the reason i created this simple but effictive box. it fits snug around the Xcortech X3200 MK3 and with a bit of old fabric the bbs are catched. No more…
- Pobrania
- 70
- Polubienia
- 3
- Ocena
- 0
P
Printablesglitchyme
Hoover Vacuum Part (part no. 303832001)
Hoover Vacuum Piece Button part from Hoover holder - adapter lower hose Uh70211 Uh70212 Uh70215 OEM Part Number 30383200
- Pobrania
- 63
- Polubienia
- 4
- Ocena
- 5
P
PrintablesSajeOne
KTM/HQV 450/500 Marking Mandrel Pt.# 78129032000
This is a re-created version of KTM/Husqvarna "Marking Mandrel" Pt.# 78129032000 intended for timing the balancer shaft when re-installing the side case on a KTM 450/500 or Husqvarna 450/501. Here's a YouTube video explaining the process:…
- Pobrania
- 57
- Polubienia
- 2
- Ocena
- 0
P
Printablesblue_radio
Single-Stud Mount for EGO 320W Charger (CH3200)
Mount bracket for the EGO Power 320W battery charger (model CH3200) which allows the charger to be mounted on a single stud instead of requiring something at least 4" wide. I tried to make this a quick print while still making it sturdy,…
- Pobrania
- 56
- Polubienia
- 4
- Ocena
- 0
P
PrintablesLev - 3DPing
Continuity Camera iPhone Holder with MagSafe for Benq PD3200U
A continuity camera holder for iPhone 12/13/14 pro (may work on others, I have not tested) with MagSafe insert specifically designed to sit on top of the Benq PD3200U. It may work on other Benq Monitors assuming they have the same side…
- Pobrania
- 55
- Polubienia
- 4
- Ocena
- 0
P
PrintablesFelix B
SKS3200M-4GPY2XF 10" rack mount
A simple 10" rack mount for a cheap SKS3200M-4GPY2XF switch. Model is available on OnShape if you want to remix it.
- Pobrania
- 48
- Polubienia
- 8
- Ocena
- 5
P
Printablestato_713
3200 Phaethon scaled one in eighty thousand
Originally published here: 3200 Phaethon scaled one in eighty thousand by tato_713 - Thingiverse I did not render this model, I just soften and simplified to look less "poly", using the model available in the DAMIT website. The file's…
- Pobrania
- 46
- Polubienia
- 4
- Ocena
- 0
P
PrintablesFelix B
SKS3200M-8GPY1XF 10 inch rack mount
Simple rack mount for a SKS3200M-8GPY1XF managed 2.5G router. OnShape file is available here for remixing .
- Pobrania
- 40
- Polubienia
- 2
- Ocena
- 0
P
PrintablesAlex
Diesel 3200 Badge
Printable Diesel 3200 Badge Print in PETG or something with a higher glass transition temp. Should be the right scale, but can be adjusted in the slicer Fusion file attached
- Pobrania
- 40
- Polubienia
- 5
- Ocena
- 0
P
Printablesstephen collins
Mig Feed Roller (8mm D-Shaft 18.8mm OD 11.6 Width) For Lincoln Welders Such as Weld Pak 3200
This is a prototype of a 3D printed Feed roller for Lincoln welders. Ideally this would be printed out of ABS, Nylon or Petg and would be used to feed aluminum wire through a PTFE lined gun. Category: 3D Printing
- Pobrania
- 38
- Polubienia
- 6
- Ocena
- 0
P
PrintablesYell
Xiaomi AX3200 Ceiling Mount
Print in PETG, i use 4 walls, top, bottom with 30% grid infill. (single screw to flex more and be able to rotate it) Onshape link in case you want to add more holes or make it thinner…
- Pobrania
- 38
- Polubienia
- 5
- Ocena
- 0
P
Printablesslavik kopanov
Riser legs for Philips Series 3200 coffee machine
I made this model because I needed access to easily clean under my coffee machine. It's not a complicated or cool model but it does the job. Fits for Philips Series 3200. Enjoy .
- Pobrania
- 37
- Polubienia
- 6
- Ocena
- 0
P
Printablesmax@kuka
KR Fortec-2 ultra (KR800 R3200-2)
About the Model: This 3D-printed model provides a highly realistic representation of the KUKA KR FORTE-2 ultra on a reduced scale of 1:10 and serves as an illustrative exhibit for visualizing one of our heavy-duty robots. The KR FORTEC 2…
- Pobrania
- 35
- Polubienia
- 4
- Ocena
- 0
P
PrintablesSkrattoune
Lego Technic Liftarm 32009 organizer (J) - 13x7
Tired of having your Lego Technic bent beams to take an awfull lot of space? Tired of having to sort them out each time you need a specific one? Tired of kids always mixing them up in the same bin, messing-up with your beautiful…
- Pobrania
- 31
- Polubienia
- 11
- Ocena
- 0
P
PrintablesForrest
Belkin rt3200 Router Wall Mount
This is a slide in router wall mount for the belkin rt3200, a very inexpensive and popular router for openwrt. It's a vertical mount, so the router either slides in right side up or upside down. It would work sideways also, but the router…
- Pobrania
- 31
- Polubienia
- 1
- Ocena
- 5
P
Printablesmari
Weber Q3000/3200 Gasregelknopf
Ich habe hier die Drehregler von meinem Weber Q 3200 nachempfunden. Die Originalen haben leider wiederholt ihre Beschriftung verloren. Das passiert jetzt nicht mehr. Gedruckt auf einen A1 mit PETG und dem Strenght Profil bei 0.2mm…
- Pobrania
- 28
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAtko
XikeStor SKS3200-8E1X-P Ethernet Switch Wall Mount
This is a simple wall mount for the XikeStor SKS3200-8E1X-P ethernet switch. This 9-port multi-gigabit switch with POE+ has three M3 tapped holes on either side that are designed to be used with the included rack mount brackets. I've…
- Pobrania
- 26
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTR
Extension handle for Philips 1200/2200/3200/4300/5400 Automatic Coffee machine water tank
I have my machine on the counter close to the fridge and it was a hassle to move the machine every time I had to refill the water so I designed an extension that will fit in the water tank handgrip and extend forward for easier refills.…
- Pobrania
- 26
- Polubienia
- 11
- Ocena
- 0
P
PrintablesElizer
AC-3200 wall mount
wall mount for Asus AC-3200 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: generic pla Notes: STL rotated 45 degrees to fit on smaller printers like a ender 3 which…
- Pobrania
- 25
- Polubienia
- 0
- Ocena
- 0
P
PrintablesOleg Klimin
XikeStor SKS3200-8E2X 10 inch Rack Mount
10-inch rack-mount bracket designed for the XikeStor SKS3200-8E2X managed 8/2-port 2.5/10 GbE switch. The mount attaches directly to the switch using M3×6 mm screws. Please note that the required screws are not supplied with the switch by…
- Pobrania
- 22
- Polubienia
- 4
- Ocena
- 0
P
PrintablesFang64
Linksys AX3200 or E8450 Wall Mount
I made this to wall mount the Linksys AX3200/E8450 because I didn't want to sit it on a table somewhere. I do believe others might want this as it is slowly becoming a popular router for OpenWRT and other open firmware on the market. I…
- Pobrania
- 22
- Polubienia
- 2
- Ocena
- 0
P
PrintablesCuntan Marius
xcortech x3200 support
With the help of this support and a box i've created an indoor crono. Just print this file, insert it in a card box, add a lot of foam and thats it! Category: DIY
- Pobrania
- 21
- Polubienia
- 3
- Ocena
- 0
P
Printablesntcom
Suzuki fuel tank center cushion (Product number: 4454113200)
I needed a fuel tank center cushion for my Suzuki ZR50 SL, so I borrowed a piece from a friend and made these model based on the factory part. I've printed it from Fiberlogy's FiberFlex 30D, and with the parameters given in the attached…
- Pobrania
- 15
- Polubienia
- 3
- Ocena
- 0
P
Printablesblechbude
Schablone für DX-Code ISO 3200; Template for DX code ISO 3200
Schablone um den DX-Code für ISO 3200 auf Filmpatronen zu übertragen welche diesen nicht haben. Die Seite mit den abgeschrägten Ecken an der Filmaustrittsöffnung platzieren und den Lack der Filmpatrone abkratzen. Bei Patronen aus…
- Pobrania
- 15
- Polubienia
- 3
- Ocena
- 0
P
PrintablesClaudia Calidia
Enclosure for double wire cable wago junction. VOB 1.5X2 3200W
Easy to print enclosure for connector (Wago like) for two cables of two 1.5mm² cables. Like the ones used in lampshades. This is to protect the wago for direct rain and dust for outside. I used it for low voltage leds and have no…
- Pobrania
- 14
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAlex Henstra
Mount for Xikestor 3200-5E1X
The default mounting method renders the indicator LEDs useless because they end up between the wall and the cables. This mount lets you use the same screws while positioning the switch so the LEDs face forward. I printed the mount with…
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
PrintablesNuno
Belkin RT3200 Support
Print two of these. These are to be used with Belkin RT3200 installed upside down, suggest using double-sided 3M tape.
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
Printablessartirious
Polycom Calisto 3200 Vesa Cradle
This cradle will attach to any VESA mount using the 4 M3 SHCS into the heat-inserts.
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
PrintablesAdrian Menzel
WD12X10327 GE Nautilus Dishwasher caster for GSD3200JWW/GSD3200J00WW
You will need to use supports on the round part of the model. I recommend to print it laying on it's side for best stability during and after printing. The part that holds the casters in place for the upper rack in the GSD3200JWW…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAqrox
Bosch MCM3100W, MK3501M, MCM3200W 636081 coupler
I've dropped our Bosch MK3501M food processor which broke the gear/coupler on the base of the machine so designed a new one. I've printed it with PETG with 100% infill but haven't tested the durability of the part yet. I can imagine that…
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMAGNO
Philips 3200 Grinder Plug
I was tired of fishing out old coffee beans from the hole in the cover over the grinder in my philips 3200 latte go coff
- Pobrania
- 11
- Polubienia
- 5
- Ocena
- 0
P
PrintablesOleg Klimin
XikeStor SKS3200-8E1X 10 inch Rack Mount
10-inch rack-mount bracket designed for the XikeStor SKS3200-8E1X managed 8/1-port 2.5/10 GbE switch. The mount attaches directly to the switch using two reusable hook-and-loop straps. I recommend using narrow straps to avoid blocking the…
- Pobrania
- 11
- Polubienia
- 3
- Ocena
- 0
P
PrintablesIridium
Easier access filter assembly for EASUN POWER 5600W 3200W Hybrid Solar Inverter and alike
I made this new air filter assembly since the original required you to unscrew a bracket every time you wished to clean the filters and as you might imagine these things are often located in cellars or other dusty compartments and as such…
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKingmiwok
T1 Ranger Battery Tray for the 3200 4S Shorty Lipo
Battery tray to hold the CNHL Black Series 3200mAh 14.8V 30C 4S Shorty Lipo. Holds the battery and prevents it from crashing into the flight controller, or the wires going to it.
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
Printableskohend
P3200 head pusher
Allows you to print while the lid is open, chamfered end towards the print head, PLA is enough. Also allows to print on larger labels (after cutting some plastic so P-touch tapes will work), naturally not to print on the entire width, but…
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKacper Synator
AC-3200 Skadis T-Nut mount
For the T-Nuts look at: https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb. By default the holes are made for M2.5 version. The router sticks out on Skadis board by the size of a mount, is it has…
- Pobrania
- 8
- Polubienia
- 2
- Ocena
- 0
P
Printablesshallax
IBM TS3200 LTO Tape Library Blanking Plate
Thick bar on the rear for added rigidity. Small cut out at the bottom right to allow installation in the bottom-most slot. Should work with any derivative of a BDT FlexStor II such as: 24-bay: IBM TS3100, Dell TL2000, Qualstar Q24,…
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
P
PrintablesNyptus
BenQ PD3200Q-T Remote Control Holder
The hole in the monitor's foot is perfect for inserting the kit remote control. Holder for secure installation and storage of excess cable. Material: PET-G / PLA Supports: YES The hole in the monitor's foot is perfect for inserting the…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCarsten Pauer
Brillenetui für wolfcraft 4932000 Arbeitsschutzbrille.
2-Teiliges Brillenetui für die wolfcraft 4932000 Arbeitsschutzbrille. 2-piece glasses case for wolfcraft 4932000 safety goggles.
- Pobrania
- 6
- Polubienia
- 3
- Ocena
- 0
P
Printablesmightypure
Jabra BIZ 3200 holder
This model was a remix of another creator which had magnet to be fastened on the back. This model allows user to fasten under the desk with two screws or with double sided adhesive. I printed with 50% infill PETG but i think PLA fine.
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
PrintablesCoco
Philips 3200-Series Compatible Front Plate
A replacement-style front plate designed around a Philips 3200-series coffee machine. This is an independent compatible design, not an official manufacturer part. Print guidance Use PETG, ABS, ASA, or another heat- and moisture-tolerant…
- Pobrania
- 3
- Polubienia
- 1
- Ocena
- 0
P
Printablessoul4sale
Stand for Poly Calisto 3200
A stand for Poly (or Plantonic or HP) Calisto 3200, making the speaker stand vertically and tilt backward 15 degrees.
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
P
Printables
Riser legs for Philips Series 3200 coffee machine
I made this model because I needed access to easily clean under my coffee machine. It's not a complicated or cool model but it does the job. Fits for Philips Series 3200. Enjoy .
P
Printables
XikeStor SKS3200-8E1X-P Ethernet Switch Wall Mount
This is a simple wall mount for the XikeStor SKS3200-8E1X-P ethernet switch. This 9-port multi-gigabit switch with POE+ has three M3 tapped holes on either side that are designed to be used with the included rack mount brackets. I've…
P
Printables
Mount for Xikestor 3200-5E1X
The default mounting method renders the indicator LEDs useless because they end up between the wall and the cables. This mount lets you use the same screws while positioning the switch so the LEDs face forward. I printed the mount with…
P
Printables
Philips 3200 Series Espresso Machine little helper
modifié pour l'extension du bac à grains soit plaquée correctement comme sur la deuxième photo n'oubliez pas de poster vos photos de vos prints ça fait toujours plaisir !
P
Printables
Xiaomi AX3200 Ceiling Mount
Print in PETG, i use 4 walls, top, bottom with 30% grid infill. (single screw to flex more and be able to rotate it) Onshape link in case you want to add more holes or make it thinner…
P
Printables
Philips 2200 - 3200 2cm extra
Make of bean holder for Philips printables does not allow non-commercial license org model thing:5401987
P
Printables
Philips 3200Series Milk Frother Holder
This is a custom-designed holder for the Philips 3200 Series coffee machine. The holder is designed to take advantage of the structural features of the machine. It slots into the side vent holes using two pins for positioning and is…
P
Printables
Lego Compatible (32001.dat) Technic Plate 2 x 6 with Holes
This model is compatible with the lego system.
P
Printables
![Lego Compatible (32001.dat) Technic Plate 2 x 6 [5 Holes]](https://media.printables.com/media/prints/d282824e-84d4-4b88-9963-a55ecdb26b3e/images/10107417_0593db17-dd7e-404f-ac5e-b015d9c6e11f_4b565fe3-53b8-4c0b-b9c9-fccf82b5a3ce/250x250p-8.jpg)
Lego Compatible (32001.dat) Technic Plate 2 x 6 [5 Holes]
This model is compatible with the lego system.
P
Printables
wall mounted vacuum cleaner holder red solution RV-UR3200
This is a wall mount for the RED SOLUTION RV-UR3200 vacuum cleaner. This model did not have a factory wall mount for stable parking of the vacuum cleaner. You can print PLA or PETG. My PLA model works fine. There are slots on both sides…
P
Printables
Magimix 3200XL blade wall mount
Wall bracket for the large blade of the Magimix 3200XL food processor. Since the processor has a small inner bowl, which is stored inside the large bowl, the large main blade has nowhere to go. This bracket allows it to slot conveniently…
P
Printables
Containers for small Tactix 320002 organiser - remix
This is a very simple remix to adapt Mr-J's organisers for the smaller 320002 5x compartment storage box. It's simply made by scaling the models, but the walls all still print well with standard 0.4 nozzle and 0.2 layer heights.…
P
Printables
Lego Compatible (32002.dat) Technic Pin 3/4
This model is compatible with the lego system.