Liczymy pasujące modele…
Should be compatible with Logitech Headsets G230, G231, G332, G430, G432, G930 but only G332 was tested, and works perfectly. I used Prusa Mini+ with Prusament PLA and default “0.10mm DETAIL” settings in PrusaSlicer. Original author:…
This model is compatible with the lego system.
Remix of the following model. https://www.printables.com/model/401147-ballenzange-round-bale-handler-replacement-bruder- But modified the existing left side(minor fillets) and additionally modelled the right side too.
If you’d like to say thank you, you can always buy me a coffee: buymeacoffee.com/the4n8 German: Gedruckt habe ich die Halterung mit meinem modifizierten Vyper mit schwarzem PLA. Es werden Stützstrukturen/Supports benötigt. Außerdem…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
The FRC team I'm a part of (3015) uses these cameras and I designed these mounts. Decided I should upload the .stl's for anyone that wants them. I'll try to post new revisions as well. Print Orientations: The cap should be printed with…
This model is compatible with the lego system.
This model is compatible with the lego system.
I liked the design of the original case, and it fits well, but the lip of the bottom part comes off after disassembling once or twice. So i remixed the case, so that the lid can be screwed in place. In this version you can also mount a…
My toodler broke the orginal one two times… this time I replace the broken side with a 3d printet one. I design the points where it was destroyed a littel bit stronger. have fun
Modified 1x1 with Studs on all sides
This model is compatible with the lego system.
Requires 2 insert-empty adapters printed per side. (Can be found in “Fasteners and parts for attaching hooks and objects” in https://www.printables.com/model/152592-honeycomb-storage-wall ) Print Settings: Print Quality: 0.20mm Supports:…
This model is compatible with the lego system.
This case is for the ROC-RK3328-CC (Renegade) to turn it into a mini desktop PC. This case was edited from Michael Klements' amazing "DIY Raspberry Pi 4 Desktop Case With OLED Stats Display" design:…
Mitutoyo 293-332-30 2-3" Digital Micrometer Gridfinity Bin
This is a 1" pegboard mount/holder for an Innova 3320 multimeter. The design is essentially a copy of jww's thing 2024376 on Thingiverse, though I designed it in Fusion from scratch. I recommend printing with 3 walls and 20% infill for…
This model is compatible with the lego system.
Einlagefächer für Ikea RYKTA Box 305.332.09
Hier möchte ich, wie weiter oben beschrieben, einige Kunstoffteile des “Kleinen Uhus” hochladen da es diese schon lange nicht mehr zum nachkaufen gibt. Vielleicht kann ja irgend jemand die Sachen gebrauchen der sich mal wieder nach langer…
Nach dem Einsetzen einer neuen Philips Hue Lampe kann diese über den Schalter nicht mehr geschaltet werden. Und um unbeabsichtigtes schalten zu vermeiden habe ich nach Vorbild der Originalen Wippe eine Blende konstruiert. Verwendetes…
Recognizable anywhere, the 332nd Company marched into battle wearing orange helmet markings in honor of Jedi Commander Ahsoka Tano . This unit, part of the famed 501st Legion , fought through the Siege of Mandalore and stood at Ahsoka’s…
I designed this for the aftermarket audio unit that I installed in my 2003 Toyota MR2 Spyder. The dimensions are very specific to my need so I'm not sure how useful it will be to anybody else, but, I'm going to upload it anyway. Maybe…
General This is a replacement for the rubber corner for the Land Rover Series and early Defender B- and C-Pillar (part number 33215). Commercial replacements are available but as you need 4 or 6 for each vehicle, printing can be cheaper.…
In the past I was struggling to find this scoop by De'Longhi so after all I decided to make one for my self so I can do a holder. You can find holder for this scoop here:…
A little wall platte of a clone helmet
Installation Instructions: Back Wheel for Philips FC9353 / FC9349 / FC9332 Remove the Broken Wheel: Use a flathead screwdriver to gently pry off the damaged or worn-out wheel from the axle. Clean the Axle: Remove any dust, debris, or…
Lost mine for my vaccume, designed 3d printed this up and it was a tight fit, but fit well. Designed to slide over hose.
The low side of my car's AC is buried and I couldn't get my hand in there to tighten it well. I figured with a special wrench, a socket extension, and a wrench I can 1) avoid mangling it with pliers, and 2) get a good feel for how much…
A basic bracket designed to hold Centralite Micro Motion Sensor [Model 3328-G] to the wall. The motion sensor snaps in an out pretty easily for installing or battery changes but is held quite secure otherwise.
Heute präsentiere ich hier mein erstes Model. Es handelt sich um ein im Maß einstellbarer Adapter für die Laderaumhalterung des Opel Insignia. Gedruckt ist das Ganze aus rTitan, wobei gutes ABS / ASA dafür auch reichen sollte. Bei einer…
The walls are maybe a bit tall for a spool, but the whole thing works. Requires 5 long segments, a short one (No using a perfect circle causes some fitting issues), and 18 pegs to hold it all together. Use PETG or warping is going to be a…
This is a custom-designed enclosure for the WAVGAT / ATGM332D Mini GPS modules commonly found on electronics marketplaces. It features a compact design with a snap-fit lid, ensuring your module is protected and cool while remaining…
ORGANIZZATORE GT332 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
Fine tuning AXA window faster - striker distance The spacers for the AXA 3320 allow you to fine tune the distance between the window fastener and the striker (sluitkom). Drilling holes for the window fastener may not always be precise…
An Libre Renegade 3328-CC case. Parts: Libre Computer Renegade 3328-CC Hardware: 4 - M2.5 ~4mm heat set inserts 4 - M2.5 ~4mm screws 7 - 5x3mm magnets Print Notes: PETG / ABS / ASA / PLA
Cut from rubber, or print in TPU 100% infill
Cover for a Softsoap liquid hand soap dispenser. Slide into the sleeve (snug fit) and unscrew dispenser top and put through the top and screw the dispenser top back on.
Technic Steering / CV Ball Joint Female 4L in Orange (6563322 | 7659) - longer version of older 3L joint. Multi-body STP with older 3L included.
kick start shaft to a Puch Maxi E50 Engine Part number: 349.2.13.332.0 Module: 2.75mm Putch Circle Diameter: 82.5mm Pressure angle: 20deg Number of teeth: 30 Shaft nominal diameter: 16mm Shaft model diameter: 15.85mm The part is modelled…
Backplate for HPE 332T Dual 1GbE low profile network card for Lenovo ThinkCentre M720 Tiny. You will need longer (6mm) M3 screw for the back.
This is a replacement front instruction for Brandt DFH1332 dish washer since the original instruction were erasing... Update v2 model for better rendering and installation
Tsunoda PW-332 Stackable Gridfinity Holder
Slip on Sun Shade. Remove 3 rails before using.
This is a replacement part for the BRIO bridge system (33253) . If one of your supports is missing or broken, this model provides a simple and functional alternative. The design is optimized for easy 3D printing and does not require any…
This adapter was designed for the Eschenbach 33213 microscope , allowing standard 48mm Barlow lenses to be used in place of the original proprietary Eschenbach accessories. The factory microscope uses a ribbed push-fit mount for Barlow…
This is a NON-EXACT replica of a British GPO No. 332 Rotary Telephone intended for projects that use a micro-controller. The hole in the front fits a GPO No. 12 or No. 21 Dial. This was made as an enclosure for a Raspberry Pi Pico & as…
Remix of Case for Libre Computer Board ROC-RK3328-CC (Renegade) by Viktor von Due (thanks, Viktor!). I really liked this case but wanted these changes: Closed the GPIO section of the lid Adjusted for the use of M3*8mm inserts by raising…
This model is compatible with the lego system.
This model is compatible with the lego system.
Cover for a Softsoap liquid hand soap dispenser. Slide into the sleeve (snug fit) and unscrew dispenser top and put through the top and screw the dispenser top back on.
This model is compatible with the lego system.
Should be compatible with Logitech Headsets G230, G231, G332, G430, G432, G930 but only G332 was tested, and works perfectly. I used Prusa Mini+ with Prusament PLA and default “0.10mm DETAIL” settings in PrusaSlicer. Original author:…
This is a recreation of Lego Technic part 6332570 (axle and pin connector). I printed on my Prusa i3 MK3S at .10 detail. After printing, I would recommend either the .07 or .05 ultradetail. The part works perfectly but it is not totally…
![Centralite Micro Motion Sensor Wall Bracket [Model 3328-G]](https://media.printables.com/media/prints/306635/images/2670583_91fb4546-eaec-4edb-9955-d14b8bc92025/20221030_204405.jpg)
