Liczymy pasujące modele…
Additional parts needed: Rasberry Pi 4b 40 mm PWM 4V Fan (such as Noctua NF-A4x10 5V PWM) 4x M4 countersunk screw (Normally supplied with the fan) Optional: 4x M3 nut and 4x M3x6 screw (To screw Raspberry pi securely into the case) Print…
Wydruk około 3,63 €–4,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA
Fan shroud to mount an Noctua NF-A4x10 to an LSI 9300-8i HBA. Design idea copied from @BlackHornet_355398 's fan shroud here: https://www.printables.com/model/377809-lsi-9300-16i-noctua-nf-a9x14-fan-shroud I have a LSI 9300-8i, but this…
Fan shroud to mount an Noctua NF-A4x10 to an LSI 9400-16i HBA. Design idea copied from @BlackHornet_355398 's fan shroud here: https://www.printables.com/model/377809-lsi-9300-16i-noctua-nf-a9x14-fan-shroud I have a LSI 9400-16i, but this…
For printing tips/advice: https://github.com/TonyBrobston/yet-another-smart-vent/blob/master/docs/VENT_PRINTING.md Check out the GitHub project for more information. https://github.com/TonyBrobston/yet-another-smart-vent
Initially indended to print as a keychain but can also be used as a place holder for a 40mm fan in cad proojects.
I upgraded the fans on my Monoprice select mini from the cheap 30mm units to 40mm Noctua. I found a particularly nice design for a velocity stack for 40mm fans that I was going to print out, but discovered that it had a larger center hub…
Mounting kits for mounting 3 Noctua NF-A4x20/A4x10 fans above and 3 fans below the CPU cooler in Fractal Design Terra case. Can be used only in position number 1 of Terra's inner bracket. The top bracket connects to PCI-E riser included…
Fan cover A4x10 / A4x20 (Noctua) Cover for A4x10 and A4x20 fans. Just put it over and screw it with the fan. With and without cable routing available. The width has a little bit play, the height is adjusted to my printer, if needed…
Just a touch too large for a 250mm print bed. I had planned to print it in two pieces for myself, but will probably just wait for a larger printer (Prusa XL) for the absolute best finish. Posting it now in case you already have the…
A Nuki Smart Lock adapter for a rectangular 4x10mm knob. It has a 2% tolerance, that worked nicely in my knob. Can be modified in OpenSCAD. I'd recommend printing it with 100% infill, as it's a small piece that will suffer a moderated…
LSI 9300-8i Fujitsu model remix of original. Below is link for onshape if you need to make more edits. Need supports as per the original.…
All Raspberry cases I have found were small, fancy, without possibility to mount a fan. So I have made one. It is not the smallest one or the fanciest case, but it is easy to print and there is possible to mount 40x10 fan (I am using…
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
4-wide shelf 10 bits per section for 40 total
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
Have to print slowly external perimeter and with 20% infill. If you need a different logo, feel free to contact me and I will create exactly what you need.
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
Simple fan mount for Raspberry Pi Compute Module 4 (CM4). Fan is a noctua NF-A4x10 40mmx10mm. Requires no additional hardware, just snaps in. Has clearance for a low profile heatsink.
Print with something that can survive the heat of the brakes. I made mine with PETG. Needs supports.
Great to test fitment before buying real wheel spacers. various spacers for NA/NB/ND miatas (4x100 54.1mm center bore) Simply scale the model if you want a custom size.
With a Noctua 40mm fan in hand, I decided to play around with air flow. This design pumps air from the back in the case past all the major components on the board. A little bit is diverted past the bottom to cool the M.2 slot. I set the…
An enclosure around a Wondom 4x100 amp (Sure Electronics STA503 clone) and a Mean Well NES 350-24 powersupply. Usually used to power a sim racing transducer setup.
I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…
Fan shroud for the Big Einsy case that hides the brown Noctua a4x10 fan and matches the case aesthetic. It also helps to protect the fan from debris that can cause damage. The fan should install into the shroud with a light press fit, i…
Print in PET-G. Holes are supposed to be tight with the standoffs. I can upload a looser one upon request. UPDATE 01/02/2025: Added STEP and Solidworks Maker (2025) files.
Noctua NF-A4x10 adapter for RaspberryPi 4B What is it? It fits Raspberry Pi4b dual fan aluminium radiator/fan case. Why? Bearing seized in one of original fans and I wanted to upgrade it with spare Noctua NF-A4x10 5v fan to make it quiter…
Transfer your 810 sheet film holder to 410 film holder. You need 0.2mm thickness double sided tape (10mm width) to attach it to your 810 holder. Place the tape into the blue gap (according to the picture). Remember to double check the gap…
This case for RADXA Rock 3A needs 4x M3x20x6mm standoffs and is made for M3x5mm melt-in thread inserts. Mount the SBC on the case-base with the four M3 standoffs with M3 threads. To fix the top-case use 4x M3x6 or M3x8mm countersunk…
Simple 4x10 grid Ortho. Top mount with/without O-rings. Handwiring required. Compatible with any controller thats less than 24mm wide and kinda flat around the USB port. You need the following tools and items to build this: Soldering…
A rectangle is called simple perfect if it can be filled completely with squares of different integer side length. This nice mathematical feature can obviously be turned into a puzzle. The smallest simple perfect rectangles consist of…
Fan shroud for the 40mm Noctua NF-A4x10 to cover it up and make it look better. Intended as friction mount - just put it on the fan and it should hold on there firmly. Arachne wall generation and smaller nozzle recommended.
My stock blower was dying and I was getting a lot of stringing, so I put these noctuas. This is specific for the Ender 3 Petsfang Bullseye Duct 9.27, which was made for the stock Ender 3 blower. Uses the screws that came with the Noctua…
This hotend fan mount fits a Noctua A4 fan or any other fan that's mounting hole distance is 32mm. Ruthex M3 heat insert are needed. Holes for these are 4mm in diameter and ~5.7mm deep. This is but a rough draft btw. So please bear in…
This will temporarily replace your 4x10 floor register. To save on material and time as well for added strengths I used 1.5" ABS from Home Depot. The glove sections use 12" of 1.5" ABS pipe and the boot sections use 8" of 1.5" ABS pipe. I…
Cool drivers is necessary. My cnc 3018 from Banggood is overheating (drivers) so I want to cool it. I model this model in Fusion 360 for Dingqi Electronics cnc board. The board have 92mm wide and 72mm high. You just need to print, unscrew…
I needed dual color led and the stock RED diffuser was replaced with one printed from transparent PET-G.
This design exists to take the load off of the stepper motors so that the weight of the X-axis is always supported. It also acts as a 90° support for the Z-axis and will keep the lead screw parallel with the Z-axis if properly assembled…
Big Einsy Cove Noctua NF-A4x10 5V. Noctua NF-A4x10 5V: https://www.amazon.de/dp/B00NEMGCIA Fan can be directly mounted to the Einsy Board 5V on the top right. You have to use the 2pin Adapter from the from the included accessories and…
I made this adapter for an aluminum cooling case for Raspberry Pi 4 that I ordered from AliExpress. The original case uses two small 25 mm fans, but I found them too loud for everyday use. To make the setup quieter, I designed this…
The model is not 100% finished: The corner rails of the lid don't fit the case at the moment, but you can easily clip them off and then the case works fine. It fit well enough for my usecase so I didn't go back to touch it up. If you want…
Noctua NF-A4x10 extension for E3D V6 mount for Ender 3 w/ BL Touch You need a Noctua NF-A4x10 and 2 m3 inserts.
Bought the Pittsburgh Test Probe 5-Piece set the other day at Harbor Freight and wanted a handy holder so I could use them with ease for cleaning up resin prints and not have them run away. Added stand holes for ease of use while actively…
Remixed fan cover for Noctua A4x10 Fan on a RaspberryPi with an Aluminum Armor/Heatsink Case as I needed something to keep the fan in place and to protect the fan blades/fingers. * This was printed in Bambu Labs Translucent PETG * Printed…
Print a base, which I had to position sideways to fit a P1S. Then choose a grill design—more options are on the way. This isn’t as sturdy as a metal grill, so I suggest placing it in a spot at home where no one will step on it, but where…
Fan shroud for the 40mm Noctua NF-A4x10 to cover it up and make it look better. Intended as friction mount - just put it on the fan and it should hold on there firmly. Arachne wall generation and smaller nozzle recommended.
I made this adapter for an aluminum cooling case for Raspberry Pi 4 that I ordered from AliExpress. The original case uses two small 25 mm fans, but I found them too loud for everyday use. To make the setup quieter, I designed this…
Great to test fitment before buying real wheel spacers. various spacers for NA/NB/ND miatas (4x100 54.1mm center bore) Simply scale the model if you want a custom size.
This is a wheel adapter which allows you to bolt 4x100 wheels onto a car with a 5x114.3 bolt pattern. Obviously this is for test fitment purposes only. Just to simply see if wheels will fit over your brakes and hub. The 4x100 side it…
Hi i made this Rial Viper D60 Rim just for fun. I got them on my golf 3 and really like them. The size should be 1:10 but the thickness isn’t right might fix that in the future.
Print a base, which I had to position sideways to fit a P1S. Then choose a grill design—more options are on the way. This isn’t as sturdy as a metal grill, so I suggest placing it in a spot at home where no one will step on it, but where…
Welcome to Series 04 of the Modular Brick System! This collection features 7 large standard bricks, ranging from 4x4 to 4x10. (Note: 4x1, 4x2, and 4x3 are already covered in previous series). These massive 4xN pieces are the heavy-duty…
N-Scale W24x104 (24" deep x 104lbs/ft) steel wide flange beam. Actual print size is 3.8mmH x 2.0mmW x 96mm, which scales out to 24"H x 12"W x 50'L. Print instructions The thin walls were designed for a 0.25mm nozzle and 0.10mm layer…
The sole purpose on why I remixed the model is due to the wires being out in the open, and just wanted a cleaner setup, I also added a filament cleaner to make sure that no dirt gets into the extruder risking clogs and debris. The wires…
This is a spool holder for IKEA Skadis which fits 3 spool with a size of about 100mm diameter and 44 mm thickness. The spools need to have a inner diameter of at least 13mm. Bigger inner diameters work as well (mine have ~ 17mm). I creted…
This is a "sliding" baseplate that you can use on your desk drawer, it uses the legal size rails to slide or you can use the included Rail Guide to use it on the actual drawer to slide on. it uses up ALL the Ender 3v3se print bed and wil…
