Liczymy pasujące modele…
Another little helper for your power wall. Connecting a smarthsunt to the Lynx on the female side via 30 mm copper bar leaves some connections bare. Hence, a cover would be appreciated. Here it is, based on the original step file of…
This Victron Energy 500A shunt is the newer (IP65 version, released 2023). I think the older non-IP65 version has the same bolt hole spacing, so this cover should work on that one too. This is a simple cover to protect the 10mm hex bolt…
I uploaded the entire project in both STL and 3MF format and it can be found in the project: Victron Energy LCD Box
I bought my router from Ebay, the adapter for my ShopVac was missing. So I designed a new one! The screwholes are to small, they are 5mm, you need 6mm screws! Print instructions I printed it with PETG, PLA should be fine, too. Standard…
Case Victron SmartShunt 500A
Victron 500A Smart Shunt
21/10/2024: Made a V2. Hole is now 94.2mmx57.2mm. Print it like a little house, no supports. Printed the closed one seems pretty good. Haven't tried the open one. 29/11/2022: Screen holder at 45 degrees. Opening is exactly 94mm x 57mm as…
This is a cover for a Victron 500A Smart Shunt. It has been designed with the cables coming out in a specific direction (as seen in the photos). However, if the cables on your system come out in another direction you are welcome to vary…
This is a printable, customizable insert for the PSU cutout on Phanteks cases. I made this file because my SuperFlower PSU has a data sheet on the side facing out when installed fan-down, which isn't very good looking. I modeled this case…
LEGO STEYR 1500A kfz 31
Use a strong filament for the back plate, as PC, PETG, etc For the blue face, you can use any filament. Use supports! A list of parts HERE The closest colour match I can find to the original Victron colour seems to be (I did not have that…
Simple shunt cover for the open-frame Victron 500A Smart-shunt in a straight-through cable configuration. Parametric FreeCAD file included for customization.
Mount your Renogy Battery Monitor on a flat surface. Fit is pretty solid, it won't come loose on its own but its not stuck in there.
Description This 3D model is inspired by the single-row 18650 holder from AliExpress, redesigned for improved accuracy and durability. It’s perfect for assembling single rows of 18650 cells during spot welding, testing, or cell grouping.…
This fixture is designed for 21700 lithium-ion cells used in DIY battery pack building. It provides precise alignment for single-row configurations, ensuring clean and accurate welding. It’s the 21700 version of the original 18650 Single…
Simple but effective fan duct. It can be mounted to a 140mm fan in the front of the case. Print settings: 2 walls 10% infill no supports ---------------------------------------------------- Einfacher, aber effektiver Luftkanal. Er kann…
Custom covers for the rear ITX motherboard plate. -Included a blank plate so that you can design your own. 1/3/2021- Fixed Seasonic plate Print Settings Printer: Ender 3-v2 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament:…
Shunt base measures 45mm x 83mm
The detachable Spool Pin for the Singer 500J & 500A series sewing machine Aka, the Rocketeer Sewing Machine
Part that is useless now can be a hex tool holder. It might get handy as battery contacts are not phillips head standard as usual. Simply unscrew the original and replace. Caution: this design requires battery belt to secure the hex tool…
I wanted a shelf to put atop my CyberPower BRG1500AVRLCD UPS so drew one up in Fusion 360 and printed it out. Print parts in the orientation provided - you will one to print two or three of the legs stl. I suggest you use supports on the…
Simple spacer to go underneath these reasonable bus bars. Designed for two purposes - allow wiring to pass beneath the bus bar and to height match to the smart shut so that copper flat can be used for high amp interconnects. Pass through…
Front and rear stands for P500A Desktop Case. Raise off floor/carpet to allow more air to PSU etc. 30% at least infil 0.3mm res
The foldable Spool Pin for the Singer 500J & 500A series sewing machine Aka, the Rocketeer Sewing Machine
Moved things around and added a pre-charge button and led to it. Had to get creative with the busbars to make it fit, not the prettiest busbars. button: https://s.click.aliexpress.com/e/_c40G5HgV light:…
This is a replacement base for the SmartShunt 500A/50mV
I remixed the design of an adapter to use a PGS 500 A1 grinder on a TopsCNC, from heavy to normal version. Fits this support : https://www.thingiverse.com/thing:3589949
I made these brackets to fix a Cyberpower CPS1500AVR battery backup device I purchased used. The L bracket / hooks that hold the front faceplate on were broken. Since straight gluing them would not be strong enough I created these small…
Made a simple mounting base for DC circuit breaker used in PV installations and energy storage systems Link to aliexpress: https://pl.aliexpress.com/item/1005006149911452.html
This is a replacement handle for a 500-amp battery disconnect switch . These switches are fairly generic, so this handle should fit most common models. The handle mounts using an M4 flat head screw (approximately 20 mm long) . Compared to…
Unofficial dimensional reference model for the Rigol RP3500A oscilloscope probe. This is intended for designing holders, trays, Gridfinity inserts, scope accessories, and other bench tooling around the RP3500A probe. This is a…
Yet another repair method for the 500a broken hinge knuckles. Not a perfect model, but works and can be sanded. Just the typical JB-Weld to reform the knuckle failed on me. So this will shape and reinforce the repair.
Rigol RP3500A probe holder for ERGO-FLEXI-FIX Stick the probe in here and zip tie or twist tie it down. Source Source files are available on Github .
Remix of an HDD to replace proprietary HDD cages for the Explipse G500A
The detachable Spool Pin for the Singer 500J & 500A series sewing machine Aka, the Rocketeer Sewing Machine
The foldable Spool Pin for the Singer 500J & 500A series sewing machine Aka, the Rocketeer Sewing Machine
This is a replacement handle for a 500-amp battery disconnect switch . These switches are fairly generic, so this handle should fit most common models. The handle mounts using an M4 flat head screw (approximately 20 mm long) . Compared to…
Simple enclosure, designed to be press-fit with enough room to fit a bit of cable under the back of the unit. On the back is 4 screw mounting holes and a ½" hole which is large enough to fit the cable connector through. This battery…
This shunt enclosure/cover protects against accidental short circuit and physical damage . Designed specifically for the standard 500A/50mV Victron shunt (included with BMV-Series battery monitors with physical display ) for a snug fit…
This Victron SmartShunt enclosure/cover protects against accidental short circuits and physical damage . Designed specifically for the 500A/50mV Victron SmartShunt (Bluetooth, without physical display ) for a snug fit and optimal…
