P
PrintablesHugo
Spool Holder - 2kg, 1kg, 250g
You will need bearings. for 2kg three 608 for 1kg two 608 for 250g two 696 Among the STL files are auxiliary bearings - before you get the necessary pieces :-)
- Pobrania
- 3437
- Polubienia
- 1019
- Ocena
- 4,75
Wyniki wyszukiwania: 50g
Liczymy pasujące modele…
P
PrintablesMediaMan3D
Adapter Rings for 250g Filament Spools for Bambu Lab X1-Carbon AMS (140-154mm diameter)
UPDATE 12-16-2022: Added support for Stronghold and AMOLEN 250g spools. ---- Eryone spools are a different size (150mm diameter), so I modified the original design in a couple of ways. This should work for any filament spool that is…
- Pobrania
- 3251
- Polubienia
- 471
- Ocena
- 4,63
P
PrintablesBasement Creations
Sub 250g Autonomous Drone Platform
About the Project: About the Frames In my video I talk in detail about the design process, but here I also wanted to add something about the suitable filaments. The truth is that you can 3D print those frames from almost any rigid enough…
- Pobrania
- 3234
- Polubienia
- 1008
- Ocena
- 5
P
PrintablesBobbyThunder
Efficient SD Card Case (Hold 11 SD cards + 8 Micro SD - Under 50g Filament)
I made this case to hold 11 full-size SD cards and 8 micro SD cards in a small, rugged case that uses less than 50 grams of plastic total. I added knurling and grip to both parts to make opening and closing easy. I recommend alternating…
- Pobrania
- 2080
- Polubienia
- 335
- Ocena
- 4,88
P
Printablesyn
Bambu Lab AMS Spool Adapter for Sunlu 250g Bambulab
Bambu Lab AMS Spool Adapter for Sunlu 250g filament 27/11/2023: I added some minor changes to reduce the bouncing when winding/rewinding a nearly empty spool. Spool 195mm v12 -------------- I kinda reinvented the wheel. I was surprised I…
- Pobrania
- 1968
- Polubienia
- 103
- Ocena
- 4
P
PrintablesBillie Palmer
Bambu Lab AMS 500g and 250g spool adapter
This is an adaptor to fit smaller spools in my Bambu Lab AMS. I wanted something that didn't use up a lot of filament. Video of how to install: https://youtube.com/shorts/zUIok2ksIUY?feature=share Printer: Bambu Lab X1-Carbon Speed:…
- Pobrania
- 1868
- Polubienia
- 134
- Ocena
- 4,64
P
PrintablesDerSebbler
Silica gel container, 250g, 65x140mm
This silicagel container holds 250g and is a perfect fit for the NATO ammobox size 7 (~48x24x37cm). Dimensions of the container are: 65 x 140 mm. It requires a somewhat precise printer for the threads (you should be able to reach a…
- Pobrania
- 1303
- Polubienia
- 126
- Ocena
- 5
P
PrintablesShoverobotics
Project SVRN Combat Robot (150g UK Antweight / US Fairyweight)
Ever wanted to build an UK Ant weight / US Fairy weight, but you've had no idea where to start? The SVRN platform is a system I've developed and extensively battle tested over the last year to help get you started. The base robot is a 4wd…
- Pobrania
- 1189
- Polubienia
- 88
- Ocena
- 4,8
P
PrintablesLast_90
More Nutrition -Chunky Flavour 150g Scoop Holder
who doesn't know it? you always have to dig around in the Chunky Flavour to find the spoon and end up with sticky fingers. That always bothered me. That's why I created this spoon holder so that the spoon is always within easy reach. The…
- Pobrania
- 1096
- Polubienia
- 73
- Ocena
- 5
P
PrintablesSebazzz
250g spool extender for Bambu Lab X1 AMS
Small 250g spools do not fit on the Bambu Lab X1 AMS, because the spool itself is driven (wound/unwound) by rollers which engage the rim of the spool. The 250g spools have a diameter that is too small and the rollers won't touch the rim.…
- Pobrania
- 982
- Polubienia
- 95
- Ocena
- 4,67
P
PrintablesMrWhite
GoFlyPro - FPV Drone Frame - 3, 3.5, and 4 Inch / sub 250g
Hallo, es geht hier um ein sehr leichtes Drohnen Frame das für Freestyle und lange Flugzeiten entworfen wurde. Weil ich einfach nur Freestyle fliegen möchte habe ich mich für 3,5 Zoll Drohne entschieden. Die 3,5 Zoll Drohne versuche ich…
- Pobrania
- 972
- Polubienia
- 101
- Ocena
- 4
P
Printableshazardous89
AMS SUNLU 250G Spool Adapter
Just a simple spool adapter for the SunLu 250G spools you can get from Amazon to work on the Bambu Lab AMS. I printed them with .16 .20 and .24 layer thickness without much difference. there is a small pin on this spool that locks it into…
- Pobrania
- 887
- Polubienia
- 80
- Ocena
- 4,5
P
PrintablesJC_Hood3
Creality K2 CFS 250g Sunlu adapter
I made this to adapt the new style 250g Sunlu mini spools for use in the Creality CFS used with the K2. It is sized to perfectly fit the CFS and just barely touch the top spring sliders. It also has a tab to lock one side of the spool to…
- Pobrania
- 873
- Polubienia
- 97
- Ocena
- 5
P
Printablesschiko
Spoolino - AMS Adapter for Small 200g/250g Spools
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … For (nearly?) all 200/250g spools Only two parts…
- Pobrania
- 644
- Polubienia
- 67
- Ocena
- 5
P
PrintablesPatrick Faulkner
ModulAnt - Modular Antweight/Fairyweight Combat Robot - 150g
Now with 100% less motor Mounts!* The revised Body is through testing and now no longer requires fiddly motor mounts. The body works with both N10's and N20's, just clip the little tab out of the way if using with N20's. This works with…
- Pobrania
- 632
- Polubienia
- 92
- Ocena
- 5
P
PrintablesHexAxis3D
250g Filament Spool
Tired of having only a small amount of filament on a large spool, taking up unnecessary space? Or are those small loops of filament just sitting on your desk? Here is a small spool for holding leftover filaments, up to about 250 grams.…
- Pobrania
- 544
- Polubienia
- 43
- Ocena
- 4,75
P
PrintablesDesignCraft
SUNLU 250g Bambu Lab AMS Spool Adapter
PLEASE NOTE BEFORE PRINTING: This model may not fit newly redesigned SUNLU 250g spools. Please measure your spool and compare to the dimensions specified below! This adapter system attaches to the edges of a SUNLU 250g 118x42mm spool…
- Pobrania
- 538
- Polubienia
- 37
- Ocena
- 4,33
P
Printablesmilfordoj
BMW R1150GS Speedometer Drive Gear
Replacement gear for BMW R1150GS speedometer drive - BMW RealOEM number 62122306287. There is probably no official replacement part of the plastic drive, so I took the original one and re-modeled it. Please note that dimensions of the…
- Pobrania
- 529
- Polubienia
- 52
- Ocena
- 5
P
PrintablesGreg
Amolen 250g Adapter for Bambu Lab AMS
Remix of MediaMan3D's adapter ring to include a built-in spacer to securely fit Amolen 250g spools . This model allows you to use Amolen 250g spools in the Bambu Lab AMS. You Can Buy Amolen Filament Here: https://amzn.to/47JqUDE…
- Pobrania
- 519
- Polubienia
- 52
- Ocena
- 4,5
P
PrintablesDester
Small spool adapter ring for Bambu AMS (140mm --> 200mm, for 3DJake 250g spools)
Converts a 140mm small spool to 200mm diameter. This is the standard size for 3DJake small spools. Many thanks to bkilian for the original one and providing the Fusion 360 file to be able to adjust to this size easily! Original model with…
- Pobrania
- 495
- Polubienia
- 29
- Ocena
- 5
P
PrintablesGri
Holder for Carpuride W702 / W502 on a 12mm bracket (e.g. BMW R1250GS)
remove the RAM mount ball by unscrewing the centre screw close the hole by screwing the screw back in or replacing it with a suitable M4 screw remove the 4 screws at the corners of the metal plate press 4 pieces of M3 nuts into the…
- Pobrania
- 482
- Polubienia
- 26
- Ocena
- 0
P
PrintablesJiří Sobota
250g Fishing Sinkers Mold for Concrete | Reusable Casting Form
This is a reusable 3D printable mold designed for casting 250g fishing sinkers from concrete. Ideal for anglers looking for an eco-friendly and cost-effective alternative to lead sinkers. The mold is easy to print and use, and it can be…
- Pobrania
- 480
- Polubienia
- 35
- Ocena
- 0
P
PrintablesMr_Q
Adapter Rings for 250g Eryone cardboard spool
First of all, big thanks to the creator (MediaMan3D) of the original adapter rings and clips; great design and work! The original designer has created an adapter ring and clips that fits the plastic spools of Eryone, but the clips do not…
- Pobrania
- 464
- Polubienia
- 56
- Ocena
- 5
P
PrintablesSamuel Neber
Chunky Flavour 150g Löffelhalter / spoon holder
Wenn du nicht jedes mal deine Finger beim Löffel rausholen in Pulver baden möchtest, ist das die Lösung. Passend für die 150g Dose. Einfach und schnell gedruckt. Falls die Reibung nicht ausreicht, dass der Halter nurch durch eindrücken…
- Pobrania
- 444
- Polubienia
- 15
- Ocena
- 5
P
PrintablesBennay
DJI Mini 2 lightweight landing gear | Landefüße - under 250g + improved fit
This is an improved version of Roboprint3d's Landing gear. I modified the mounting clips, so that they fit better on the Mini 2 and removed the arrow, beause this was a weak point. Verbesserte Version von Roboprint3d's Landefüßen. Die…
- Pobrania
- 410
- Polubienia
- 63
- Ocena
- 4,6
P
PrintablesFlo-3D
Adaptateur SUNLU pour bobine CFS/AMS 250g
J'ai réalisé un adaptateur de bobine pour utiliser mes petites bobines SUNLU de 250G dans le CFS de Creality, aussi compatible avec l'AMS de Bambu. Imprimé en PETG pour une meilleure résistance en cas de choc ou chaleur, mais en PLA ça…
- Pobrania
- 408
- Polubienia
- 42
- Ocena
- 5
P
PrintablesBrett Norman
Maisto Model Motorcycle Stand (BMW R1250GS)
This stand is designed to not only hold the 1/12th scale model bike, but it also gives you the option to electrify the stand with connection points to the bike. This opens up the option to install LED lights in the bike and have it light…
- Pobrania
- 370
- Polubienia
- 59
- Ocena
- 5
P
Printablespryde4114
Laundry Detergent Powder 50g Scoop (No Support)
Laundry detergent powder scoop, holding approximately 50g of poweder Created such that it can print without support Design has an angled front scoop surface, with markings denoting that the ¼, ½ and ¾ points, for ease of reading and…
- Pobrania
- 359
- Polubienia
- 46
- Ocena
- 5
P
Printablesantionion
AMS SUNLU 250G Spool Adapter Remix print faster
Redesing of https://www.printables.com/de/model/528366-ams-sunlu-250g-spool-adapter without hexagonal pattern to print faster. Instructions bolt and nut → see original modell
- Pobrania
- 352
- Polubienia
- 35
- Ocena
- 4,25
P
PrintablesmoWerk
Adapter for Creality Dry Box 2.0 (250g Spools) filament dryer
Adapter for 250g Spools: Sunlu, Jayo, Tinmorry, Eryone Designed for 250g spools from Sunlu, Jayo (plastic), Tinmorry, and Eryone (cardboard). Sunlu and Jayo share plastic spools, Tinmorry and Eryone share cardboard ones. Remixed from…
- Pobrania
- 351
- Polubienia
- 69
- Ocena
- 5
P
Printablesfonzy
Silica spool container 25mm for 200-250g spool
25mm height to fit 200-250g spool thanks to @gdrag for your Silica gel spool container 50mm
- Pobrania
- 276
- Polubienia
- 30
- Ocena
- 4,86
P
PrintablesMaximilian Mehner
150g Antweight/ Fairyweight 4WD battlebot combat robot
I did compete with this robot in four full combat competitions so far. Attesa performed (imo) really well and was able to use the shield and the spikes effectively. The speed, combined with the grippy tires, makes driving a lot of fun.…
- Pobrania
- 273
- Polubienia
- 52
- Ocena
- 5
P
PrintablesDesignCraft
JAYO 250g Bambu Lab AMS Spool Adapter
This adapter system attaches to the edges of a JAYO 250g 118x42mm spool enabling usage within a Bambu Lab AMS. Features: Reusable JAYO nameplate for easy identification when reusing Instructions: Measure your spool first to ensure it…
- Pobrania
- 270
- Polubienia
- 21
- Ocena
- 0
P
PrintablesMaximilian Mehner
ONI - 150g Antweight/ Fairyweight shuffler hammer saw combat robot battlebot +.step
This was a fight against a flipper with titanium top armour. ONI can both, do damage and control his opponents quite well. Weight: ca. 223g Size: fits 150x150 square I printed the chassis and side armour in 95A TPU. The top plates, glider…
- Pobrania
- 252
- Polubienia
- 42
- Ocena
- 5
P
Printablesmilfordoj
BMW R1150GS Hand guard Extension
Extension for hand-guards on R1150 GS/A and similar ones (R1200 GS should have the same shape, but not tested). Extensions is made in two variants: Connection to hand-guard with M4x12 bolts and nuts (ideally with some button flange head…
- Pobrania
- 235
- Polubienia
- 17
- Ocena
- 0
P
PrintablesMLS
Small Spool Adapter for Sunlu S1 Filadryer / Adapter für kleine 250g Spulen im Sunlu S1 Filament-Trockner
Der Sunlu S1 ist nur für die 1kg Standard-Spulen vorgesehen. Um auch die kleinen 250g Spulen verwenden zu können, entwarf ich diesen Adapter. Nachdem die Spule auf den Adapter gebracht wurde, wird dieser nur zusammengesteckt und in die…
- Pobrania
- 227
- Polubienia
- 45
- Ocena
- 5
P
Printablesdanielkrah
![[~50g filament usage] ESUN, ROSA3D, Prusament, Kraus spool (1Kg refill coil)](https://media.printables.com/media/prints/135190/images/1291358_221e72b2-298c-4745-babe-2a166e0894d2/img_5168.jpg)
[~50g filament usage] ESUN, ROSA3D, Prusament, Kraus spool (1Kg refill coil)
This spool is designed to use with threaded inserts I used the ones from cnckitchen: http://cnckitchen.store/shared-products/431146823?ref=v1:431146823:-1510512723 If you use the “inner - minimal” then a full spool need less than 50g. 6x…
- Pobrania
- 225
- Polubienia
- 31
- Ocena
- 5
P
PrintablesMM3D Workshop
SPOOL for 500g of filament- CLICK CONNECT- just 50g to make!
The lightest spare filament spool you can find online! All other versions take 100-150 grams of filament to make. TESTED PRINT PLUS THIS SPOOL NEEDS NO SCREWS OR GLUE TO CONNECT TWO PARTS . It has locking "mechanism" designed inside of…
- Pobrania
- 208
- Polubienia
- 11
- Ocena
- 5
P
PrintablesMetroBroomin
SSD PCB Case for 250GB Samsung 860/870 Evo
Case for the PCB of a Samsung 860/870 evo that is 250GB as it does not fill up the full case and needs some walls to support its positioning unlike the original which uses different ways. I used M3x8 screws to keep it together but you…
- Pobrania
- 194
- Polubienia
- 12
- Ocena
- 0
P
PrintablesDesignCraft
ERYONE 250g Bambu Lab AMS Cardboard Spool Adapter Ring
This adapter system wraps the edges of a ERYONE 250g 149x38mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable ERYONE nameplate…
- Pobrania
- 187
- Polubienia
- 16
- Ocena
- 5
P
PrintablesTomáš Ciffra
Mercusys Halo H50G WallMount
Wallmount for Mercusys Halo H50G Mesh AP, airvented
- Pobrania
- 186
- Polubienia
- 11
- Ocena
- 5
P
PrintablesAndrás Bognár
GepRC Cinelog25 – Cleanest, light-weight printable parts for the famous sub-250g CineWhoop
Update 19.05.2024.: I upgraded the propeller guards further. Rigid on the inside and flexible on the outside. And 3 grams lighter! https://www.printables.com/model/884159-unbreakable-propeller-guard-for-cinewhoops-upgrade Update…
- Pobrania
- 178
- Polubienia
- 25
- Ocena
- 0
P
PrintablesRetro
Silica Gel Holder/Box/Storage 150g
This desiccant container holds over 160g of silica gel and includes a lid designed to securely hold a thermometer without the need for glue or tools. The thermometer can be easily screwed in and stays firmly in place. It's a convenient…
- Pobrania
- 176
- Polubienia
- 15
- Ocena
- 0
P
PrintablesDebOrtiz
Mika3D 250g Spool Adapter for Bambu AMS
I had quite a few smaller 250g spools of Mika3D rainbow filament that I wasn’t able to use in the Bambu AMS. My skills are limited to TinkerCad however, I found that I could create my own 250g Spool Adapter for Mika3D Spools. My Mika3D…
- Pobrania
- 173
- Polubienia
- 16
- Ocena
- 5
P
Printablesdronyhawk
30mm rims for 32mm 2 or 3 O ring wheels with D hub for N10 N20 N30 motor for 150g combat robot high traction wheels
I couldnt find any good wheels for my 150g combat robot that fit my chassis, had enough traction, and stayed on the hub well. So I made one. There are 2 models one for 2 O rings and 1 for 3, size 211 works best 212 can work (from harbor…
- Pobrania
- 168
- Polubienia
- 12
- Ocena
- 0
P
PrintablesAngus B. Clark
Mini (250g) Bambu Lab Reusable Spool
Reusable spools are great! That is, until you end up with a small amount of filament left over. With a large model, I prefer to use a fresh spool of one colour - what do you do with the leftover ~200g of material? Enter - the mini…
- Pobrania
- 158
- Polubienia
- 11
- Ocena
- 5
P
PrintablesJonathan Weber
Fix for AMS 250g Spool Adapter
Print 2X per spool
- Pobrania
- 158
- Polubienia
- 16
- Ocena
- 5
P
PrintablesEvilProphet
ESRack - Module - MikroTik hEX RB750Gr3
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
- Pobrania
- 154
- Polubienia
- 14
- Ocena
- 0
P
PrintablesHellforge Actual
7.62x51/.308 Ammo Can Label Stencils (150gr & 175gr)
Spray paint stencils for your 7.62x51 / .308 ammo containers! - 150gr - 175gr Enjoy, more stencils to come!
- Pobrania
- 151
- Polubienia
- 31
- Ocena
- 0
P
PrintablesJantar
ZOHD Dart 250g DJI O3 Cam Mount
This is a DJI O3 Cam Mount for the ZOHD Dart250g. Print in PLA with no supports.
- Pobrania
- 148
- Polubienia
- 8
- Ocena
- 0
P
PrintablesDesignCraft
MIKA3D 250g Bambu Lab AMS Spool Adapter
This adapter system attaches to the edges of a MIKA3D 250g 134.5x44mm spool enabling usage within a Bambu Lab AMS. Features: Reusable MIKA3D nameplate for easy identification when reusing Instructions: Measure your spool first to ensure…
- Pobrania
- 146
- Polubienia
- 14
- Ocena
- 5
P
PrintablesN-Spire
“Everything Adapter” Universal Spool Adapter (200g / 250g / 500g → AMS / CFS Compatible) N-Spire
HOW TO THANK A DESIGNER? Post a make! If you like "universal" printer stuff, check out my printer stand/drawer system here: ⚙ Key Features of the spool adapter Sorry the first photo is messy, dang AI photo generator. But look at the other…
- Pobrania
- 145
- Polubienia
- 14
- Ocena
- 5
P
PrintablesTommi
Spool holder / box for 250g spools
A box for smaller filament spools (250g). It is designed to hold a filament spool and protect it from dust. Max spool measurements: 150mm diameter, 50mm width. Print instructions Parts just about fit the Prusa Mini build plate. With 0,4…
- Pobrania
- 144
- Polubienia
- 24
- Ocena
- 5
P
PrintablesHive78
Ikea Kallax Filament Storage Remix for Sunlu 250g spools
A remix of the great Kallax filament storage solution by Blocker modified for 250gr spools (from Sunlu for example). There are two versions, on mostly used for the front with just one row and a double-whopper edition where you can store…
- Pobrania
- 144
- Polubienia
- 36
- Ocena
- 5
P
Printablesmilfordoj
BMW R1150GS Navigation Phone Bracket
Bracket to hold bar for your navigation or phone on BMW R1150 GS motorcycle. Important note : This bracket is made for -street- use. If your navigation / phone is heavy and you will be riding a lot of offroad-ing, the vibrations of…
- Pobrania
- 142
- Polubienia
- 15
- Ocena
- 5
P
PrintablesSAW1L
10 Inch rack Mikrotik rb750gr3
I started working with 3D for a litle time, I did not find any Mikrotik rb750gr3 for 10 inch rack, so I made my own.
- Pobrania
- 139
- Polubienia
- 12
- Ocena
- 0
P
PrintablesMrWhite
GoFlyO4Pro - FPV Drone Frame for DJI O4 Pro - 3, 3.5, and 4 Inch / sub 250g
Das GoFlyPro Frame wurde weiterentwickelt um die DJI O4 Pro und das Walksnail Moonlight Kit einzubauen. Es werden hier nur die benötigten Dateien für die GoFlyO4Pro Drohne hochgeladen. Es ist sozusagen einfach nur ein Upgrade und baut auf…
- Pobrania
- 139
- Polubienia
- 10
- Ocena
- 0
P
PrintablesGamano_CZ
Case RB450G
Official documentation: https://routerboard.com/CA150 . After realizing that every piece of RB450G is different, I had to make universal adjustments. So, the modification in version 3.
- Pobrania
- 136
- Polubienia
- 9
- Ocena
- 0
P
PrintablesRJCDesigns
Bambu Lab/ACE Pro AMS Spool Adapter for Sunlu 250g - Push fit REMIX
This is a re-useable push-fit adaptor that holds both sides of the spool adaptor firmly together and also fits firmly inside the Sunlu 250g spools i purchashed that have a 53mm centre hole. This allows you to use smaller spools in your…
- Pobrania
- 128
- Polubienia
- 8
- Ocena
- 5
P
PrintablesNick.96
ZOHD Dart 250G battery mount
Battery mount for the Dart 250G to use velcro battery strap and simple adjust the COG.
- Pobrania
- 126
- Polubienia
- 12
- Ocena
- 0
P
Printablespahapuha
Lego-compatible 6.5 stud spring - 750g
Print in PETG with line width of 0.3mm, make sure z-seam is not on the thin spring and the spring is actually 2 lines wide (I printed 0.3 mm out of 0.4mm nozzle just fine) Takes about 750g to fully compress (pretty much in between grey…
- Pobrania
- 126
- Polubienia
- 28
- Ocena
- 0
P
PrintablesBasementLAB
BMW R1250GS - Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger
BMW R1250GS - Keychain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the property of their respective…
- Pobrania
- 125
- Polubienia
- 7
- Ocena
- 0
P
PrintablesMaxime Le Dû
250g spool drawer (sunlu)
After endless search to re-use my spool from a 8x250g filament purchase, I went back to the drawing board and present to you my take on the spool drawer. Fit for Sunlu 250g spool ¤14cm - H2,8cm (drawer) Handle for easy access locking pin…
- Pobrania
- 121
- Polubienia
- 25
- Ocena
- 4
P
PrintablesNick.96
ZOHD Dart 250G screwable ESC cover with antenna mount
ESC cover for the Dart250G with intigrated antenna mount. Glue in the 3D printed nuts and you can remove it any time.
- Pobrania
- 120
- Polubienia
- 15
- Ocena
- 0
P
Printablesoizopetr
Keychain BMW F650GS Dakar
Rotating keychain for owners and fans of the BMW F650GS Dakar motorcycle.
- Pobrania
- 120
- Polubienia
- 11
- Ocena
- 0
P
PrintablesKen
250g spool adapter Sunlu
I bought some Sunlu filament and didn't realize that it was 250g spools. So here was my fix.
- Pobrania
- 118
- Polubienia
- 10
- Ocena
- 5
P
PrintablesKeepy
Mikrotik HEX RB750Gr3 Vertical Mount
Printed using eSUN PLA+ Black
- Pobrania
- 114
- Polubienia
- 9
- Ocena
- 0
P
PrintablesMisterD
Spool Stand (for 250g SUNLU spools) (for 1kg Filamen PM ~untested~)
for storing sunlu 250g spools second model should work for most 1kg spools but is untested it is designed to need as little filament as possible. it has 2 holes for mounting to a shelf. it also has holes in the side to connect multiple…
- Pobrania
- 107
- Polubienia
- 14
- Ocena
- 0
P
PrintablesFabietto3D
Bobina 250g
fac-simile bobina 250g Print Settings Printer Brand: Creality Printer: CR-X Rafts: No Supports: Yes Resolution: 0.20 Infill: 20% Filament: qualsiasi pla qualsiasi Category: 3D Printer Accessories
- Pobrania
- 105
- Polubienia
- 3
- Ocena
- 0
P
PrintablesFlorian Mulatz
Scoop Holder for MoreNutrition Chunky Flavor (new matte 150g jar)
Tired of digging through powder avalanches to find your scoop? 😅 This holder is designed exactly for the new MoreNutrition Chunky Flavor jars – because all the models I found were either too big (for the large jars) or made for the old…
- Pobrania
- 104
- Polubienia
- 3
- Ocena
- 5
P
PrintablesEOD Dave
Det Cord Connector for 50gpf Det Cord
Det Cord Connector for 50gpf Det CordDet Cord Connector for 50gpf Det Cord
- Pobrania
- 103
- Polubienia
- 7
- Ocena
- 0
P
Printableskoesterakis
New Core One+ Spoolholder for 250G spools
The new Core One Spoolholder does not fit 250G spools. So I edited the original model. Still fits nicely in the puck. You can find the puck under the original upload:…
- Pobrania
- 103
- Polubienia
- 12
- Ocena
- 5
P
PrintablesJanDupal
BMW R1150GS Adventure plexi mounting brackets (outer part only)
If you managed to crack your original Adventure mounts, this is a model for you. If you're looking to upgrade your standard GS with Adventure plexi, then this is NOT a complete model – the inner (larger) brackets aren't here. This model…
- Pobrania
- 103
- Polubienia
- 14
- Ocena
- 0
P
PrintablesJosh
250g Battle Bot
I made this battle bot and it weighs about 250 grams, not the best but it has potential. I used some Gear Motors and a 400 Milliamp lipo battery. For the switch, I stole one off of a laser X gun. The tires are from a scx24 crawler. they…
- Pobrania
- 102
- Polubienia
- 10
- Ocena
- 0
P
PrintablesStefanN
Spoon-Holder for Chunky Flavor Cans 150g - 2025 (FreeCAD)
This holder is designed to fit into the new cans of 150g size (2025) with a opening of 81mm. It got some features: three noses to fixate the holder-ring in the can-opening designed the plane to hold the spoon in place left a hole in the…
- Pobrania
- 101
- Polubienia
- 3
- Ocena
- 5
P
PrintablesAmir
Protective cover cap for BMW G650GS
Do you have a G650GS, awesome! And did you lose/broke the protective cover cap on the back. Print and cover those screws. Printed with Bambu X1C: 0.4 nozzle 0.28mm, Extra Draft (you decide the quality) 15% infill Recommended to print with…
- Pobrania
- 101
- Polubienia
- 6
- Ocena
- 0
P
PrintablesWIESEMANN 1893
Mini Sledgehammer Wall Mount (1350g) 032 I ENFORCE I for screws or peg board
Tool holder for mini sledgehammer. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 100mm W - 53,29mm H - 60mm We design all…
- Pobrania
- 99
- Polubienia
- 16
- Ocena
- 0
P
PrintablesNick.96
ZOHD Dart 250G TBS Wallmount
Wallmount for ZOHD Dart 250G. The gcode is sliced with manual filament change, if you have an MMU you can slice it yourself. Print it with or without TBS logo.
- Pobrania
- 97
- Polubienia
- 12
- Ocena
- 0
P
PrintablesTRIMAGIA
Mikrotik RB750Gr3 plus raspberry pi 4/5 10-inch rack mount
1U 10-inch rack mount for a MikroTik RouterBoard RB750Gr3 (installed without its case) and one Raspberry Pi 4 or 5. Requires M3 nuts and bolts for mounting the MikroTik RouterBoard. Requires M2.5 bolts for mounting the Raspberry Pi.…
- Pobrania
- 95
- Polubienia
- 13
- Ocena
- 0
P
PrintablesE Sands
KiwiFil Adapter for carboard 1kg and 250g spools in AMS or other dry box
Made this to suit my cardboard spools I buy from a local supplier and my AMS. I printed in PLA to start and also did one in PETG. Both worked great with no support needed at 0.2mm layer height. Has spikes to aid in gripping the cardboard…
- Pobrania
- 95
- Polubienia
- 6
- Ocena
- 4
P
Printables3D-Hummel
Filament Wall Mounted Rack for 250g spools
A storage option for filament rolls. As connection I used 15,5x1,5mm aluminum tube which can be bought in the Globus hardware store. With a length of one meter and an infill of 35%, the hold is still very stable. At lengths over a meter…
- Pobrania
- 93
- Polubienia
- 11
- Ocena
- 5
P
PrintablesTheRealChadford
Small (250g) Spool Holder
If you have a small spool that doesn't fit where you normally put your filament, you can put your filament on this, and it'll stay standing and should feed well too. I printed mine out in PETG, and I don't know how it would work with PLA.…
- Pobrania
- 92
- Polubienia
- 8
- Ocena
- 5
P
PrintablesMetal Matt
Skyr 450g Yoghurt Pot Lid
Simple yoghurt pot lid which fits the 450g Skyr pots you can get in the UK. Not much else to say. Uses about 21g of filament.
- Pobrania
- 92
- Polubienia
- 2
- Ocena
- 5
P
PrintablesJanDupal
BMW R1150GS Adventure tank guards v0.3
BMW R1150GS Adventure with the 30 liter tank tends to get nicked when you “have to lay ‘er down”. There were aftermarket tank guards available by Touratech, but they aren’t manufactured any more and very hard to get second hand. WARNING:…
- Pobrania
- 92
- Polubienia
- 6
- Ocena
- 0
P
PrintablesIper82
Spool adapter for SUNLU 250g with diameter 42mm
Adapter for 250g SUNLU spools with an inner diameter of 42mm. Considered 15% infill but with 3 walls to make it rigid. The two pins have the anti-rotational function, locking the two pieces with the pins in the side holes of the spools…
- Pobrania
- 91
- Polubienia
- 3
- Ocena
- 5
P
PrintablesMetti
3DJAKE 250g clip for AMS spool adapter
I really like the adapter rings from MediaMan3D, but the clips didn't work for my 3DJAKE 250g spools. With this clips you can use the rings for 140mm spools and get a nice, snug fit on your spools.
- Pobrania
- 87
- Polubienia
- 12
- Ocena
- 5
P
PrintablesBasementLAB
BMW R1250GS Key chain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger
BMW R1250GS Key chain - Portachiavi - Porte Clès - 钥匙链 - Schlüsselanhänger Type B / C / D Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the property of…
- Pobrania
- 85
- Polubienia
- 7
- Ocena
- 5
P
PrintablesRafael
Mikrotik RB450Gx4 Case
A modern enclosure for this fantastic Mikrotik device with the following features: Very tight geometry. Follows Mikrotik Branding Guidelines. Air ventilation placed where heat is mostly generated. Textured enclosure for less 3d…
- Pobrania
- 83
- Polubienia
- 6
- Ocena
- 0
P
PrintablesGreg
SainSmart 250g spool adapter for Bambu Lab AMS
Remix of MediaMan3D's adapter ring that provides a custom fit for SainSmart 250g spools. This model allows you to use the SainSmart 250g spools in the Bambu Lab AMS. Want to support my work for free? Check out Amazon for your hobby…
- Pobrania
- 81
- Polubienia
- 13
- Ocena
- 0
P
Printablesyesthisisted
Spool Holder for Sunlu 250g Rolls (Multicolor Bundles)
I bought two multicolor bundles to be able to print toys for my kids, but they have very small spools that don't fit on the bambu p1p's spool holder. They were also just the wrong size for the spool holder from…
- Pobrania
- 79
- Polubienia
- 9
- Ocena
- 5
P
PrintablesJanDupal
BMW R1150GS Adventure side stand extension
I've bought Marselus R1150GS sidestand extension , but it's designed for the non-Adventure R1150GS. The Adventure has a different footprint. This model reuses two (middle and bottom) out of three stainless plates + mounting hardware from…
- Pobrania
- 79
- Polubienia
- 14
- Ocena
- 0
P
PrintablesBen
VIFLY/other strobe mount for DJI/other drones (under 1g for 250g drone laws)
A simple slide to lock in connector for mounting VIFLY strobes to any drone including DJI <250g models. Use double sided tape to connect the light top to a flat section on the strobe (battery side etc) and the light bottom to a flat…
- Pobrania
- 77
- Polubienia
- 10
- Ocena
- 5
P
PrintableszKraken
Wrath of Felix - 150g ant weight sumobot
If you feel like helping me fund my kids journey into Combat Robotics: https://buymeacoffee.com/happykraken
- Pobrania
- 75
- Polubienia
- 2
- Ocena
- 0
P
PrintablesChrizz
Spool Idler - FormFutura 250g Mini Cardboard Spool
RC-1.0 - 1 December 2022 FormFutura released their new EasyFil ePLA / ePETG range. These also come on cute small cardboard spools but they are a bit different and come with a bore (hole) diameter of 53~54mm. The cardboard spools give a…
- Pobrania
- 75
- Polubienia
- 12
- Ocena
- 5
P
PrintablesandHoc
BMW R1250GS navigation spacer v1
BMW R1250GS navigation spacer Print with 20% infill
- Pobrania
- 73
- Polubienia
- 6
- Ocena
- 0
P
PrintablesandHoc
BMW R1250GS navigation spacer v2
You need brass inserts instead of nuts. A screw has been added for a more fixed installation. I recommend grinding the tip of middle screw to a point.
- Pobrania
- 73
- Polubienia
- 6
- Ocena
- 0
P
Printablesx_giedrius_x
Creality Space Pi Filament Dryer Spool Adapter for Smaller Spools (250g/500g)
A common issue with the Creality Space Pi filament dryer is its design for larger 1kg spools, which causes smaller spools (like 250g and 500g) to not spin correctly and the filament to get dislodged from the rollers. This adapter solves…
- Pobrania
- 72
- Polubienia
- 13
- Ocena
- 0
P
Printableseurad
Rolling Little MasterSpool (750g Filament)
Remix of DAS FILAMENT Little Masterspool ( https://www.thingiverse.com/thing:2791930 ) with some ideas taken from existing remixes. Changes: Rings added Area for label added Filament slots on inner and outer rings added Filament coil…
- Pobrania
- 71
- Polubienia
- 8
- Ocena
- 5
P
PrintablesOlliWer
Adapter small Nutella jar (450g)
The adapter is supposed to be printed without supports. I used PETG and 0.2mm layer height and this worked flawlessly for me. I printed a second one, where I adjusted the angle so the jar is parallel to the front of the dispenser. This…
- Pobrania
- 69
- Polubienia
- 10
- Ocena
- 5
P
PrintablesDiAleksi
Airtight case for 3DJake's 250g spool
Airtight case for 3DJake's wonderful 250g spools. To keep them always dry. The case comes with two versions. For 6mm and 4mm PTFE tubes. But you can use the case also without the tube. Insert 10x10x4mm sponge with a hole in the centre.…
- Pobrania
- 66
- Polubienia
- 8
- Ocena
- 0