Liczymy pasujące modele…
Modified from the original design. Wider clip and printability tweaks. You may need to give it a nudge with a pair of pliers to fully seat it. Durability untested. The button still presses against two clips as per the original design. An…
Wydruk około 0,24 €–0,30 € nettoWstępna wycena jednego wariantu
Connector housing for DC-5521 / DC5521 low voltage connectors. I did not like that there is no strain relief when attaching cables to the typical DC-5521 connectors you get on eBay or Amazon, so I designed these housings. I left the area…
This model is compatible with the lego system.
I suggest this being used not only for bed slingers, but also for any printhead. Just glue it somewhere…
Wall Mount to use with various Lego Star Wars TIE models. Tested with sets 75211(Solo TIE Fighter) and 75348 (Mandalorian TIE Interceptor) Gives enough clearance to rear for Solar Arrays of both models tested. Makes use of a Head piece…
Filament: - JAYO - white - PLA+ - ERYONE - Marmor - PLA Objektgröße: ca. L:B:H in cm 14:17:25 Drucker: Bambu Lab X1-Carbon Düse: 0,4 Schichthöhe: 0,2 Infill: Variiert zwischen 5% und 10% Stützen: keine Druckzeit: - Fuß: 2h:52min - Block:…
Simple CCS adapter holder, can be mounted in the boot using velco or there's an optional ‘clip’ model which fits (snuggly) into the main holder body. I've used the clip version to attach the holder to the edge of the carpet cutout for the…
This model is compatible with the lego system.
Not the best model but it works. Maybe usb-c port hole need to be little bigger. Print with some TPU. I printed with TPU 96A and it's great. Good luck!
Diese Wagen sind ein Community-Projekt. Mitglieder verschiedener Foren trugen erheblich zur Entwicklung bei. Herzlichen Dank an der Stelle an alle, die öffentlich sichtbar oder auf Umwegen Stücke zum Puzzle beigetragen haben. Das fertige…
A simple lens hood made for the Sony 55-210mm F4.5-6.3 lens. Begone lens flare! For the print I used a 0.4mm nozzle, 0.2mm layer height. I have added supports at the bottom for the bayonet mount and also a brim because this is a…
Chain Guard to replace the original discontinued part. Works on the following motorcycles: NX250 NX650 XL600R XL600V XRV650 XRV750 Requires 2 m6 bolts and washers.
Diese Wagen sind ein Community-Projekt. Mitglieder verschiedener Foren trugen erheblich zur Entwicklung bei. Herzlichen Dank an der Stelle an alle, die öffentlich sichtbar oder auf Umwegen Stücke zum Puzzle beigetragen haben. Geschichte…
My parents got a new EGO ST1521S string trimmer to replace their aging trimmer they had. The new one did not come with an obvious place to put a shoulder strap like their old one did. This clamps onto the shaft of the trimmer just below…
I designed this to raise the airport fan from being so close to desk and the scratching of the bottom of the Airport. A 2nd Airport also fits underneath if wanted to stack two or more. Put a rubber band around bottom of Airport to make…
I remixed this from https://www.thingiverse.com/thing:3108158 for my friends polaris rzr unfortunately the newer models have different style hubcaps (part# #1521128 for stock alloy wheels) fits these models Enjoy!
A tripod ring for your Sony 55-210mm SEL55210 (kit telephoto) lens! After struggling to find a aftermarked lens ring I decided to design my own for this kit lens. I plan on making different aesthetic versions and keep the thickness/safety…
Wall mount for Knipex 1252195 wire stripper with hole for M4 srew
Not as fancy as a Pegasus Astro Powerbox, but works great just for providing enough DC jacks to power gear. Can technically be daisy-chained. Working on a V2 with individual circuit relays and possibly a dew heater controller. Made to fit…
The original insert for the grinder always made a huge mess during and after grinding. So I remixed an insert off thingiverse to also hold a dosing cup. (dosing cup)…
Save space and show off the more interesting angles by mounting your LEGO X-Wing kit vertically on a wall. I plan to make a mount for each of the kits I have over time. Check back in to see the collection grow! Notes on use: If things…
Container for the Gridfinity system for two Anker 521 (PowerCore 5K) Can be printed without support Good results even with 0.3 mm layer height (Prusa i3 MK3S+) Fits the flat Ikea Alex drawers Not stackable Credits: Many thanks to Zack…
Modelo diseñado en fusión 360, básico y resolutivo, lo diseñe por no encontrar nada en los repositorios, espero que les sirva, a mi me fue de maravilla.
This model is compatible with the lego system.
About model Optimised and prolonged inner handle for Mitsubishi Delica's sliding doors. Made for a friend's offroadsafari.cz orange Delica. ASSEMBLY ! You need to put your original steel nut into plastic insert first, rounded side in.…
I remixed this from https://www.thingiverse.com/thing:3108158 for my friends Polaris razor unfortunately the newer models have different style hubcaps (part# #1521128 for stock alloy wheels) fits these models Enjoy! This model features…
Disclaimer : Swapping the strain relief involves opening the charger, which is a mains-powered device. Such devices contain components like capacitors that can store high voltage even after being disconnected from power for long periods.…
Tundra and Sequoia owners who have had their front skid plates on/off multiple times (e.g. each oil change) will eventually experience the failure of Toyota Part #52116-0C090 due to over tightening or material brittleness etc. This 3D…
This model is compatible with the lego system.
This model is compatible with the lego system.
This lensboard can be used to convert the Ikonta 521/15 folding camera. You can srew in an 65mm threaded focus adapter. It has an Arca Swiss mount to secure the camera on a tripod and a mounting point for a hotshoe. When used with 120…
Wall bracket for Fiskars pruner P521 and all other with similar blade shape. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 20% Filament: Prusament PLA Black…
A simple mount to install a Supernova V521S front light on a normal bike light support (width of 8mm, M6 screw). Use the provided screw that comes with the light. Print on the side. No support required. Printed mine in ASA with 0.4mm…
Good model from cults, but the tabs were very weak. Beefed up the strength of the tabs and it works great now. Print with supports under the tabs Allegedly this remote is the one used for the following models of home theatre amp RAV521…
Store the mains and 12v car adaptors for your Anker Powerhouse 521 directly on the units rear panel - no danger of misplacing or forgetting them. There are slots for 10mm strips of velcro to secure the adaptors if needed, and space for a…
Alternative key cap for Fujitsu KB 521 rubber dome boards. Some modifications for easier printing. Printing black ABS like resin 50 µm layer height
I made a little 10 inch rack mount for my Raspberry Pi 4b (but the 5 should also fit) with a flexiDOCK MB521SP-B There are options with more disks but i'm not confident it will work (not enough power through a single USB port). The…
Support de batterie d'origine pour Honda s2000. Crée à partir du modèle d'origine Idéal en ABS ref 31521-SR3-0000
Someone mentioned that the file is broken (STL), this happens when you split the parts and arange the plate, there still are thin slices that also get moved around and break the part. I have uploaded a split parts STL remix for that.
Model of a 5212 body pack to assist in making pouches.
Main DPS unit: DPS3005, DPS5005 Female banana connectors: standard ones should fit OK Speaker spring connectors: standard double pole version 5521 DC jack: again, standard ones that look like this (approx. 9mm x 11mm x 14mm)
This is a custom insert for the game 5211 (Azul Edition) for use with 4 x 6 Photo Caddy boxes. My Photo Caddy is Iris branded.
Follow plug tool for cross-style lock cylinders. I used this for a Prime-Line GD 52139. Remove retaining ring, insert key and turn 45 degrees, insert follow plug into cross hatch, push tool against cylinder to remove from the cylinder…
I could not source the filters the AirManager V2 is build for. This is why I bought a random airfilter for cars, that uses activated carbon. I then constructed a adapter to use it in the AirManager V2.
About This is a replacement locking mechanism for a very common style of slow masticating juicer. The juicer appears to be a white label product sold under many brand names such as Aobosi, AUMATE, and Aicok, differing only in name and…
Rack mount for Inspur SA5212M4 HDD Cage (SFF-8643 version) with cable tie points for mounting 80mm/120mm fans. Mirror along the appropriate axis for the other side's bracket. Print... With a 0.4mm nozzle with 4 perimeters (adjust…
Dies ist ein Ständer für den Lego X-Wing 75218. Theoretisch passt er genau auf die Unterseite des X-Wings. Auf dem Bild sind weiße Striche. Das liegt an der Stützstruktur und zu der Zeit hatte ich meinen 3D-Drucker noch sehr neu und…
The PVL5211/PVL526 manifold can be used to actuate pneumatic robotics such as the Sunram 7. A single manifold base houses up to eight valves, but the Sunram 7 needs twelve. So two manifold bases are needed and these can be effectively…
This is a tool mount for a Craftsman 183.172521 Rotary Cutting Tool for the MPCNC Primo CNC. It is sized to fit the Universal Tool-Mount Plate for MPCNC ( https://www.thingiverse.com/thing:1697287 ). There are four parts (files) to this…
Este es un Set de LEGO NO OFICIAL, NO ES COMPATIBLE CON LOS LEGOS TRADICIONALES. Para imprimirlo de manera adecuada aseguraros de mirar las notas que tienen ciertas piezas ("Lego enganche" y "Lego 63") para que el set este completo y se…
Had a HP 5210 USB camera laying around. Removed the base and replaced it with this model. Attached using this mount: https://www.thingiverse.com/thing:2886101
Printing Printing in PETG recommended (not tested in PLA, likely to lose friction fit if left in a hot car). Print with 0.2mm layer height flat on the print bed - there is a slight taper to aid the friction fit. No need to mirror,…
I created a simple and small ring mount for use with the, pretty standard, 43mm square tripod quick release mount. It feels quite perfectly balanced over a wide range. As printed in two parts you will need a M4x30mm screw and a M4 Nut,…
ORGANIZER GT521 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
The brown, broken part is the original one. I printed the part with PETG Filament with 0,2mm layers. Category: Replacement Parts
Боковая пластиковая втулка переднего бампера на Toyota Hiace.
If you're in the alarm industry you are likely familiar with the Lynx Touch and likely have been working with the LYNXTOUCH-MSD updater tool for upgrading LTE radios in these panels. I made this box to hold the PCB and instructions to…
I had an old HP HD5210 webcam lying around that I wanted to use for my printer, but I found nearly every available arm used the Logitech C270. Instead of reinventing the wheel, I just made a rudimentary adapter to allow my HP to use the…
Guide bracket thing for Frontier snowblower. I got the machine from my neighbor's trash to fix up, and this was part of it. I printed in glass fiber nylon, as the low temps this will see would tend to make most plastics brittle. It's also…
Simple Stand for Grundig MT 5210 Multi-Trimmer
No special requirements. Print on the default setting.
Best if you have big rolls supply, better money economy with this diy can fit any type of roll type and length, max 10-11 cm wide
Better model of Realme 9 rmx3521 phone case
Now, with a little work you can add your name to this sweet Nokia 521 phone stand! Just download the model and import into your favorite 3d modeling program and add some letters. Export, slice, print and enjoy! Category: Mobile Phone
Lightning Lid iQ100 Wandesse 90 cm LC94WA521 Sparepart since the plastic clips from the original break from time to time. There are some tricks to use to get the transparent filament truly transparent enough to be used as a Lid for this…
hold 3 pbswiss 5215 screwdriver handles, 10 of 5215 pbswiss bits, and extra 6.35mm standard bits. for IKEA Skadis pegboard hanger designed you can print without pbswiss logo or modify it check for 3mf file
a case for sennheiser sk5212 place for a battery antenna and the beltpack
This is a hood-mount solar filter adapter designed specifically for the Sony SEL55210 (E-mount APS-C). The adapter locks directly into the original lens hood bayonet groove, allowing the use of an existing full-aperture solar filter…
Adaptér na připojení 10Nm pohonu Belimo NF24A (a podobných) na kulový kohout s přírubou velikosti F03 ISO 5211 tisknuto z šedé a černé: PC/ABS Šedá (1,75 mm; 1 kg) | Tiskové struny | Filament PM Použitý kulový kohout: Ventil kulový…
Sony Alpha 6000 SEL55210 optic mount with 2x10mm magnets for sun filter from glasses for solar eclipses.
4-Chlorobenzotrichloride (C7H4Cl4, CAS 5216-25-1) — a free educational 3D molecular model for teachers and students, by MolGod.org. Each atom is labelled with its own engraved element symbol: no colour chart needed. At its heart,…
This is a hood-mount solar filter adapter designed specifically for the Sony SEL55210 (E-mount APS-C). The adapter locks directly into the original lens hood bayonet groove, allowing the use of an existing full-aperture solar filter…
ORGANIZER GT521 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
I created a port cover to protect my solar generator's DC output ports because it didn't come with any covers. Quick and simple design but effective. This is meant to be printed using flexible filament. I used Filatech FilaFlex40 and the…
This model is compatible with the lego system.
This model is compatible with the lego system.
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Someone mentioned that the file is broken (STL), this happens when you split the parts and arange the plate, there still are thin slices that also get moved around and break the part. I have uploaded a split parts STL remix for that.
5211 This is a remix of the fantastic Photo Box game insert created by Gut Shot Games . Enough room for all game cards and instruction book that fits above the cards. Made specifically to fit Photo and Craft Keeper 4x6 inch storage bins…
I created a port cover to protect my solar generator's DC output ports because it didn't come with any covers. Quick and simple design but effective. This is meant to be printed using flexible filament. I used Filatech FilaFlex40 and the…
This adapter allows attaching standard quarter-turn actuators to cheap PVC ball valves to automate them. It provides a standard ISO 5211 F04 mount. Mounting The adapter is designed for valves with a body diameter of ~41.6mm. Here is a…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
![Display Stand for LEGO Star Wars 75257/7965/75105/75212 Millennium Falcon [last update 9.04.2024]](https://media.printables.com/media/prints/838473/images/6458017_a30dbb81-8f18-48b2-8a94-f5863e103e49_79e2d29e-48ed-40dc-977f-c4132af73026/75257-4.jpg)
![Display Stand for LEGO Star Wars 75219 Imperial AT Hauler [last update 23.04.2024]](https://media.printables.com/media/prints/855248/images/6643963_300aeac0-86d6-4acd-8c40-bbbe2f9fb6ef_6be7f5dd-d08f-435e-9391-0a5f165b9db2/75219.jpg)
