P
Printablesthall72
Lego Compatible (61189.dat) Minifig Helmet SW Clone Trooper Phase I
This model is compatible with the lego system.
- Pobrania
- 1025
- Polubienia
- 112
- Ocena
- 5
Wyniki wyszukiwania: 611
Liczymy pasujące modele…
P
Printablesthall72
Lego Compatible (61190bdat) Minifig Armour SW Clone Trooper Pauldron
This model is compatible with the lego system.
- Pobrania
- 920
- Polubienia
- 74
- Ocena
- 0
P
Printablesthall72
Lego Compatible (61190a.dat) Minifigure Weapon Gun Blaster Small without Scope
This model is compatible with the lego system.
- Pobrania
- 676
- Polubienia
- 98
- Ocena
- 5
P
PrintablesV1 Engineering
DeWalt 611 Mount and removable dust shoe for the LowRider 3 CNC
DeWalt 611 Mount and removable dust shoe for the LowRider 3 CNC. Print at 30%+ infill, fits ~48mm OD Vacuum hose. Vacuum hose gets a cable tie on the upper tool mount and one to the top of the core. It can take a bit of muscle to get the…
- Pobrania
- 637
- Polubienia
- 31
- Ocena
- 0
P
Printablesthall72
Lego Compatible (61190c.dat) Minifig Armour SW Clone Trooper Tasset
This model is compatible with the lego system.
- Pobrania
- 618
- Polubienia
- 59
- Ocena
- 0
P
PrintablesV1 Engineering
DeWalt 611 Tool Mount and Dust Shoe for the LowRider 4 CNC
Tool mount and dust shoe for the DeWalt 660 series palm router and a 70mm OD or less vac hose. PETG or better if you are concerned with heat. PLA works for most routers, some new ones seem to be hotter than the old ones though. Best to…
- Pobrania
- 585
- Polubienia
- 35
- Ocena
- 5
P
Printablesbobmakes
Router Sub Base for Guide Bushings for Dewalt DCW600/DCW611
I recommend 4 top and bottom layers, 3 walls, 30% infill.
- Pobrania
- 537
- Polubienia
- 82
- Ocena
- 5
P
Printablesdsharlet
DeWalt trim router dust shroud (DWP611, DCW600, A27941)
I really don't like dust flying around my garage, routing edges was always one of the worst offenders. This shroud, combined with the standard dust collection port for DeWalt trim routers, will nearly eliminate stray dust from edge…
- Pobrania
- 499
- Polubienia
- 78
- Ocena
- 4,5
P
PrintablesR1CDM
Hikvision DS-KABV6113-RS protective shield
Hikvision protective shield for KV6103/6113 series villa door station.
- Pobrania
- 450
- Polubienia
- 35
- Ocena
- 5
P
PrintablesPoty
Oculink ATX external eGPU enclosure for SFF 8612 SFF 8611
My printer settings: Filament = ABS Layer hight = 0.2mm Infill = 16% Support = no Wallcount = 4 Material: 1x ATX Power Supply 1x Used Oculink PCB: cablecc 4X OCULINK (…
- Pobrania
- 396
- Polubienia
- 30
- Ocena
- 0
P
Printablesthall72
Lego Compatible (61190d.dat) Minifig Helmet Rangefinder for SW Clone Trooper Helmet
This model is compatible with the lego system.
- Pobrania
- 394
- Polubienia
- 49
- Ocena
- 5
P
Printablesloopj
Motorola MB8611 / MB8600 / MB7621 Cable Modem Rack Mount 1.3U
1.3U rack mount for the Motorola MB8611 / MB8600 / MB7621 cable modem, with ventilated shelf and keystone jack. Also has a screw mount hole to mount the modem directly to the modem tray. You must remove the base/stand of the modem in…
- Pobrania
- 387
- Polubienia
- 32
- Ocena
- 4,8
P
PrintablesErl
Bosch Dishwasher 00611472 Tine Row Clip replacement
My used dishwasher was missing these. STEP included.
- Pobrania
- 357
- Polubienia
- 26
- Ocena
- 5
P
Printablesthall72
Lego Compatible (61190e.dat) Minifig Helmet Floodlight for SW Clone Trooper Helmet
This model is compatible with the lego system.
- Pobrania
- 345
- Polubienia
- 43
- Ocena
- 0
P
Printablesloopj
Motorola MB8611 / MB8600 / MB7621 Cable Modem Rack Mount 1U-ish
Rack mount for the Motorola MB8611 / MB8600 / MB7621 cable modem, with ventilated shelf and keystone jack. Also has a screw mount hole to mount the modem directly to the modem tray. You must remove the base/stand of the modem in order to…
- Pobrania
- 340
- Polubienia
- 22
- Ocena
- 4,5
P
Printablespoelstra
Hikvision DS-KV6113 doorbell bracket (45 degrees)
Bracket for mounting Hikvision doorbell camera with 45 degree angle, intended to be mounted in a corner. Can be mounted left or right. Print settings: 0.2mm layers, 20% infill. I printed in silver PLA to (roughly) match the camera's…
- Pobrania
- 321
- Polubienia
- 18
- Ocena
- 0
P
Printablesthall72
Lego Compatible (61184.dat) Technic Pin 1/2 with Bar 2L
This model is compatible with the lego system.
- Pobrania
- 317
- Polubienia
- 42
- Ocena
- 0
P
PrintablesGage
Adjustable Height CNC Dust Shoe for DeWalt 611
Update 27 April 2020: Thank you to Jcharouz for the awesome 3D printed brush strip alternative. :) https://www.thingiverse.com/thing:3929569 Update 30 Aug 2018: Uploaded STEP file containing the 3 router parts. This dust shoe uses the…
- Pobrania
- 291
- Polubienia
- 42
- Ocena
- 0
P
PrintablesMatt B
X-Carve Dust shoe for Dewalt 611 spindle
This remixed dust shoe is designed to work with the Inventables Spindle Carriage, P/N 80033 for the Dewalt 611. The upper dust shoe and support arms now contain slots for nuts (both square and hex). This should allow for…
- Pobrania
- 289
- Polubienia
- 39
- Ocena
- 4,67
P
Printablesthall72
Lego Compatible (6117.dat) Minifig Chainsaw Blade
This model is compatible with the lego system.
- Pobrania
- 279
- Polubienia
- 50
- Ocena
- 0
P
PrintablesRingbaer
Knipex Cover 7803125/ 7861125
This is a small protective cover designed for the Knipex side cutter 78 03 125 (without lead catcher). When applied, the cover locks the pliers in the closed position, ensuring safety and convenience during storage or transport. Printing…
- Pobrania
- 270
- Polubienia
- 51
- Ocena
- 5
P
PrintablesJohny69
Bristles for "Adjustable Height CNC Dust Shoe for DeWalt 611"
These are bristles for the Adjustable Height CNC Dust Shoe for DeWalt 611 by Gage6917. It is very hard to source the bristles in Europe, so I decided to print them as well and it turned out fine. There are two versions uploaded, one…
- Pobrania
- 244
- Polubienia
- 33
- Ocena
- 5
P
PrintablesBilliam
Modular Dewalt DWP611 router collar (quick release)
This is a remix of the MPCNC quick release router mount to provide a slightly modular place to mount accessories. Print instructions Fed the original through netfabb to fix geometry issues. Removed the actual frame mount in the rear to…
- Pobrania
- 192
- Polubienia
- 39
- Ocena
- 4
P
PrintablesJohn
X-Carve / Shapeoko DeWalt 611 Router Dust Boot (69mm)
Here's links to the things I got on amazon to put in the slot at the bottom, and optionally reinforce the screw hole. The screws used were the ones that came with the CNC, but it's a 5mm threaded screw hole in the model, so any m5 should…
- Pobrania
- 181
- Polubienia
- 20
- Ocena
- 0
P
PrintablesRem
Drip Tray Replacement for Black + Decker Electric Griddle (GD1611B)
This is a drip tray replacement for a Black + Decker Electric Griddle (GD1611B). If your griddle looks similar to this exact griddle, this replacement may work for you with some slight editing! Print instructions It is recommended to…
- Pobrania
- 172
- Polubienia
- 6
- Ocena
- 0
P
Printablesthall72
Lego Compatible (61195.dat) Minifig Headgear Headdress SW Togruta Montrals Short with Triangles Pattern (Ahsoka Tano)
This model is compatible with the lego system.
- Pobrania
- 165
- Polubienia
- 24
- Ocena
- 0
P
Printablesjmynheir
DWP611 Router baseplate
I modeled the baseplate so I could use a jig setup by screwing a 1x3 board and route a radius. There are 2 stls, a stock baseplate, and a modified baseplate. I also include the Blend file if you want to modify further. Category: Machine…
- Pobrania
- 158
- Polubienia
- 24
- Ocena
- 0
P
PrintablesBilliam
CNC pen holders for Dewalt DWP611 mount
Collection of failed and successful pen holders attached to my my Dewalt DWP611. Print instructions A collection of pen holders I've tried attached to a Dewalt DWP611 (see parent project for mount). This is a work in progress Currently,…
- Pobrania
- 149
- Polubienia
- 15
- Ocena
- 0
P
PrintablesStawiamKlocki.pl
Display Stand for LEGO 31140 Rainbow Falcon / 40611 Millennium Dragon / 31124 Venator Z (MOC by Luke_Bricks82)
Before you go further! This project is for personal use only. Any commercial use is forbidden Follow me on Instagram to keep up with latest designs Check out this project's Instagram - @StawiamKlocki.pl Read FAQ Follow MOC designer on…
- Pobrania
- 146
- Polubienia
- 29
- Ocena
- 5
P
PrintablesBLawl
Netgear Hotspot Case (MR6110) - Nighthawk M6
About this model: This has been modeled for the Netgear Nighthawk M6 (MR6110) It is a simple snap fit outer case, made from PLA, PETG, or whatever filament you like. There is an inner “sleeve” designed for TPU. I mimicked basic phone case…
- Pobrania
- 114
- Polubienia
- 9
- Ocena
- 5
P
PrintablesWar_Crafts-3d
Italian Ab-611 Armored cars
Description I refined angles on this model through importing it to sharp3d and blender. I also wanted to make a print profile available to the public. Changes where made in the size and angles. I specifically wanted to fix the back to…
- Pobrania
- 113
- Polubienia
- 17
- Ocena
- 5
P
Printablesslynn1324
DWP611 CNC Dust Shoe
Dust Shoe for my CNC Router with a DWP611. Fits a Ridgid shop vac hose. Assembly of the top requires 2 long 5mm socket cap screws and 5mm nylock nuts. I measured and cut down 90mm cap screws with a hacksaw to roughly 77mm so that they…
- Pobrania
- 112
- Polubienia
- 11
- Ocena
- 0
P
Printablesthall72
Lego Compatible (61193.dat) Torso Mechanical Magna Guard
This model is compatible with the lego system.
- Pobrania
- 109
- Polubienia
- 30
- Ocena
- 0
P
PrintablesJosh
Dewalt DWP 611 router circle buddy
This is a simple model that can be mounted onto the DeWalt router. I have included holes for 6 to 18" holes. The name should not be changed. I am offering this model for personal use only. The orange jig pictured here is the first one I…
- Pobrania
- 103
- Polubienia
- 18
- Ocena
- 0
P
PrintablesDavidVelasco
LG Air Conditioner Remote Back Cover AKB73315611
A friend lost the battery cover for the remote of his LG Air Conditioner (model no. AKB73315611), so I decided to replicate the model using the other remote he has. It is better to print it in vertical or with one side in the hot bed…
- Pobrania
- 103
- Polubienia
- 6
- Ocena
- 0
P
PrintablesXenoBlaster
Albrecht AE 6110 Car Cup Holder
Albrecht AE 6110 Car Cup Holder this is a Remix from: https://www.thingiverse.com/thing:2517549
- Pobrania
- 101
- Polubienia
- 15
- Ocena
- 0
P
PrintablesMaggus
Holder for Panasonic Hair Trimmer (ER1611)
I´m trimming my hair in the shower and don´t want to leave the shower with hair all over my body. So I needed a place to put my hair trimmer while showering. I attached the holder with two double sided tapes onto the outside glas panel of…
- Pobrania
- 100
- Polubienia
- 10
- Ocena
- 5
P
Printablesdwp
Phillips Sonicare HX6110 Charger Mount
New toothbrush, new mount needed. Counterbore is for #8 size tapping screw, but I'm sure many will fit.
- Pobrania
- 99
- Polubienia
- 12
- Ocena
- 5
P
PrintablesVaclav
Adjustable leg (00611942) for SIEMENS / BOSCH dryer
The original leg is quite fragile and very expensive. So I made it by my own and you can see on the pictures the original (left) vs. 3D printed (right).
- Pobrania
- 93
- Polubienia
- 4
- Ocena
- 0
P
PrintablesOld Machinist
DeWalt DWP611 Router Dust Shoe Vac Hose Adapter
Adapter fits hose and dust shoe fairly tight, might want to reduce scale slightly. First print worked well enough for the task that I didn't feel the need to print another. Printed in PETG for my first piece.
- Pobrania
- 89
- Polubienia
- 28
- Ocena
- 4
P
PrintablesPuffi74
Kühlschrank AMICA Modek KS15611R
Hier der Schließer für das Kühlfach in verstärkter Bauweise.
- Pobrania
- 87
- Polubienia
- 2
- Ocena
- 0
P
PrintablesAlex_NL
Crystal Chandelier Pot remix to fit IKEA 104.611.47 hanging plant
In order to fit the IKEA plant I resized the pot and also removed the vase mode and turned it into a regular print. It now perfectly fit the IKEA plant item number 104.611.47.
- Pobrania
- 86
- Polubienia
- 12
- Ocena
- 5
P
Printablesthall72
Lego Compatible (10611.dat) Minifig Hair Combo Hat with Hair Helmet Space Retro with Open Front with Molded Earpieces and Crest and Ponytail Pattern
This model is compatible with the lego system.
- Pobrania
- 84
- Polubienia
- 16
- Ocena
- 0
P
PrintablesThomas
Remington PG6110 Beard Trimmer/Shaver Cut Length Attachment
I lost my 1.5mm attachment for my beard trimmer so instead of buying a whole new trimmer, I just printed a new one from scratch. The attachment is used for setting the length of trim and fits onto the battery powered shaver by snapping…
- Pobrania
- 82
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJeremy68
étui pince coupante knipex 7861125
étui pince coupante knipex 7861125
- Pobrania
- 79
- Polubienia
- 10
- Ocena
- 4
P
PrintablesM.O.U.E.
Collet Wrenches for DWP611, DW660 and PR20EVS
Simple hand wrenches for the Dewalt 660, 611 and Bosch PR20EVS routers works well with 2.5 inch endmills and v bits. The tip of the tool needs to be smaller than the nut. **Dec 2, 2020 updated fit and added .25 inch bit shank holder.…
- Pobrania
- 75
- Polubienia
- 14
- Ocena
- 0
P
Printablestomreeb
Motorola MB8611 Wall Mount
Simple wall mount shelf for a Motorola MB8611 cable modem. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Filament: any PLA any Category: Organization
- Pobrania
- 74
- Polubienia
- 7
- Ocena
- 5
P
Printablesflbdesign
Front tank bracket 17611437000 for Honda XLR XLS 125 1979-1990 Honda
Front tank bracket for Honda XLR XLS 125 1979-1990 Honda Original part Honda: 17611437000 Printing in TPU - PETG - ASA 100% infill
- Pobrania
- 72
- Polubienia
- 10
- Ocena
- 0
P
Printablesthall72
Lego Compatible (39611.dat) Plate 4 x 4 x 0.667 with Five Point Star Shape
This model is compatible with the lego system.
- Pobrania
- 69
- Polubienia
- 15
- Ocena
- 0
P
PrintablesMurdogk
Basic-brick 1 lego 3004 3008 3009 3005 3010 6112 2465 3622 6111
Bloques compatibles con sets lego Basic-brick
- Pobrania
- 68
- Polubienia
- 17
- Ocena
- 0
P
Printablesthall72
Lego Compatible (36112.dat) Minifig Headgear Mask Cat with Muzzle and Nose Pattern
This model is compatible with the lego system.
- Pobrania
- 68
- Polubienia
- 13
- Ocena
- 5
P
PrintablesKieran E
Magicshine MJ-6118 Bottle Cage Adaptor
Holds your Magicshine MJ-6118 battery in a standard MTB bottle cage location! The design has small detents to help hold the battery in place but still lets it slide out easily for charging. Optionally includes a cable routing channel if…
- Pobrania
- 67
- Polubienia
- 8
- Ocena
- 5
P
PrintablesFlurbb
Makita Circular Saw Hanger XSH03 DSS611
I can't mark it as a remix of a model from Thingiverse but this is a remix. Designed to fit #8 wood screws. Based on https://www.thingiverse.com/thing:5240190 by Brodo78 The original runs all the way down the shoe of the saw and it felt…
- Pobrania
- 66
- Polubienia
- 6
- Ocena
- 0
P
PrintablesCosmin
Bosch Unlimited Series 6 Vacuum repair BCS611 maybe 7 and 8th series
My bosch 6th series vacuum main brush has snapped. The part that allows it to rotate broke. I included the f3d file in case you want to make some improvements. I did my best to create some placeholders of some of the parts. The V1 had to…
- Pobrania
- 61
- Polubienia
- 6
- Ocena
- 0
P
Printablesthall72
Lego Compatible (6611.dat) Technic Angle Connector 4-Way 60 Degree
This model is compatible with the lego system.
- Pobrania
- 58
- Polubienia
- 16
- Ocena
- 0
P
PrintablesMike E
Shop Vac or 2 1/2 dust collection hose to Ryobi P611 Cordless Hand Planer
Needed a dust collection adapter to attach my Ridgid shop vac to my Ryobi P611 Cordless Hand Planer and only one I could find was too small for a standard shop vac hose. Also designed to fit 2 ½ dust collection hose on outside of fitting.
- Pobrania
- 58
- Polubienia
- 10
- Ocena
- 0
P
PrintablesLaKoS
Ikea Skadis Knipex Snipper 7861125 holder
This is my version of the Knipex Skadis holder. Did a few changes to it, so it can be printed in the standing Prints very easy…only the peg needs support, the rest can be printed without supports. Printed it in 0.2mm layer height.
- Pobrania
- 56
- Polubienia
- 7
- Ocena
- 5
P
PrintablesJay 974
Dewalt 611 dust shoe for CNC
Needed a dust shoe for a Workbee Z1 fitted with a Dewalt 611 router. Found a design i liked but it did not leave enough clearance on the sides and loosing 20mm on each side of the router was a bummer.…
- Pobrania
- 55
- Polubienia
- 11
- Ocena
- 0
P
Printablesfmriguy
Motorola MB8611 / MB8600 / MB7621 Cable Modem Rack Mount 1.3U - 10” Rack Edition
This mount will allow you to attach a Motorola cable modem (models MB8611 / MB8600 / MB7621) horizontally and store in a 10-inch networking rack. Unscrew the base from the modem, lay on its side and attach screws through the side of the…
- Pobrania
- 53
- Polubienia
- 5
- Ocena
- 0
P
Printablesdim20
Suzuki Ignis Center Air Vent Flap Linkage (73611-81A00)
This part should also fit for other Suzuki models such as the Jimny and possibly Wagon R+ related cars (i.e. Vauxhaull/Opel Agila) of the same era. For any broken off flap mount points, one can use small screws of similar diameter, set…
- Pobrania
- 52
- Polubienia
- 10
- Ocena
- 5
P
Printablesthall72
Lego Compatible (61192.dat) Minifig Head Modified SW Magna Guard with Cloak
This model is compatible with the lego system.
- Pobrania
- 51
- Polubienia
- 10
- Ocena
- 0
P
PrintablesMichael Kehm
Dewalt DWP611 mounting plate for Craftsman 25444 router table
This mounting plate lets you use a Dewalt DWP611 router with a Craftsman 25444 router table. The mounting plate is 1/4 inch thick. Same as the base plate that comes with the router. To mount the plate to the router table I used M4-20…
- Pobrania
- 51
- Polubienia
- 5
- Ocena
- 0
P
PrintablesTyler Mode
Shop-Vac to Ryobi Planer (P611)
This adaptor allows my Shop-Vac to connect to my Ryobi Planer (P611). The bag that comes with the planer is awful and clogs up almost immediately. The adaptor fits on the outside of the planer and to the inside of the Shop-Vac to prevent…
- Pobrania
- 48
- Polubienia
- 11
- Ocena
- 0
P
PrintablesKiko Lobo
X-Carve with Dewalt 611 Spindle - JTech Front Laser Mount
This is a custom laser cutter/engraver mount for the Dewalt Spindle Holder in the X-Carve CNC Machine. The laser head is built by JTechPhotonics. I use the 3.8 watt Version, but any head should fit (as of Sept/2017). This will mount your…
- Pobrania
- 48
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJay 974
CNC DUST Shoe Dewalt 611
I needed a compact CNC dust boot for the Z1 fitted with a Dewalt 611 Only hardware needed are : 2ea M6x20 hex screws ( the M6 female threads are printed in the main body) 4ea 10x3 magnets (optional, i did not receive them yet but the boot…
- Pobrania
- 47
- Polubienia
- 5
- Ocena
- 0
P
PrintablesGeorge Bobeck
Lionel Canister 6112 (Approximation)
This is a quickly thrown together rough model of a Lionel Canister 6112. The model isn't quite accurate to the original canister, but it is close enough to pass from a distance, and is better than running nothing in the car. I printed…
- Pobrania
- 44
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMarco Maker
Inventables X-Carve universal Dewalt 611 mounting bracket
Prusament PETG Prusa Orange 250°C Extruder, 85°C Bed Nozzle 0,4mm Additionally, you need: 9x Ruthex M4 thread inserts
- Pobrania
- 43
- Polubienia
- 9
- Ocena
- 0
P
PrintablesRGWoodVA
Dewalt 600 or 611 Palm Router - Makita Track - Robust Model
This robust jig attaches the corded (DWP611) or cordless (DCW600) Dewalt 1.25hp palm router to Makita track rail. Features: A. The router attaches to the jig using the original plate screws. B. I drew the Makita track profile and then…
- Pobrania
- 41
- Polubienia
- 15
- Ocena
- 0
P
PrintablesKiko Lobo
X-Carve with Dewalt 611 Spindle - JTech Side Laser Mount
This is a custom laser cutter/engraver mount for the Dewalt Spindle Holder in the X-Carve CNC Machine. The laser head is built by JTechPhotonics. I use the 3.8 watt Version, but any head should fit (as of Sept/2017). This will mount your…
- Pobrania
- 39
- Polubienia
- 3
- Ocena
- 5
P
Printablescasey
9x9 in Skeletonized Router Sub Base for Dewalt DCW600/DCW611
It is the maximum size of plate that my Bambu P1S can print.
- Pobrania
- 34
- Polubienia
- 5
- Ocena
- 0
P
PrintablesChuffine
Hakko 611 Solder Spool Bushing
Print at as high a resolution as you can to get the best results on the fillets. Resin might be a good option. I hit mine with a 1.5mm drill after print to make a clean channel.
- Pobrania
- 33
- Polubienia
- 7
- Ocena
- 3
P
PrintablesGR3D
Bosch Dishwasher 00611472 Tine Row Clip replacement REMIX
Material: ABS Handle modified with a cutout. Be careful during assembly, as the “claw” may break off during adjustment. The printout requires supports.
- Pobrania
- 31
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBilliam
Dewalt DWP611 CNC pointer attachment
Small angle bracket to hold a roughly 8mm diameter point. Print instructions This is designed to help measure travel distance on the X and Y axis when setting up and tuning a CNC router. Uses 1 m3x8 screw to hold the pointer in (a nail),…
- Pobrania
- 31
- Polubienia
- 4
- Ocena
- 0
P
PrintablesTailslide
LowRider V2 - DW611 Pen Holder
This is a pen holder that snaps into the dewalt router plate that is standard for the low rider V2. Just pull out the router (or retract it if you have a short pen) and snap in the disc from underneath. Compatible with my Z-Probe so it…
- Pobrania
- 30
- Polubienia
- 7
- Ocena
- 0
P
PrintablesKieran E
Magicshine MJ-6118 3D model
A simple STEP file of a Magicshine MJ-6118 battery pack. I'll tell you right now that it's not millimeter-perfect, but it was good enough to make a battery mount for my bike (with a 0.25mm offset).
- Pobrania
- 28
- Polubienia
- 2
- Ocena
- 0
P
Printableseried
Improved DeWalt 611 Air Diffuser for X-Carve /w lock button
Redirects the air flow of the router to avoid blowing directly on the work piece and also extends the lock button for an easy tool change. The original diffuser was nice but I added some improvements: -The base is 2 mm instead of 4 mm.…
- Pobrania
- 27
- Polubienia
- 4
- Ocena
- 0
P
Printableshugabaloo
Dewalt 611 CNC Tramming Tool
CNC Tramming Tool remixed from V1Engineering to fit the Dewalt 611's spindle nut.
- Pobrania
- 27
- Polubienia
- 1
- Ocena
- 0
P
Printablesrussman
Drill Press Dremel Adaptor 6117
I picked up a cheap drill press made for electric drills that came with a bunch of adapters but none fit a Dremel. I picked up a cheap drill press made for electric drills that came with a bunch of adapters but none fit a Dremel so I made…
- Pobrania
- 25
- Polubienia
- 10
- Ocena
- 0
P
PrintablesChristiaan
Front Tank bracket cushion 17611437000 for Honda NX 250 300 XLR XLS 125 ATC NSR 50
I was missing one of the two tank cushions, printed in TPU. It is a replacement for 17611-437-000. It should fit a lot of old Honda's including: nx250 atc250 nsr50 xls125 + more.
- Pobrania
- 24
- Polubienia
- 4
- Ocena
- 0
P
Printablesclusterfuggles
Dual Solder Spool Reel (inspired by Hakko 611-2) Includes NEW V2
I have a Hakko 611-2 dual solder spool reel and I love it so I created this printable version. Like the Hakko stand you can reverse the wire guide on the bottom spool so the stand can be used from the front and the back. Printing…
- Pobrania
- 24
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBrokenPoet
Dewalt DW611 Super-PID Tachometer Holder
I use a DeWalt DW611 Router as a spindle on my Shapeoko 3, and also use a Super-PID controller to control the speed of the router. The Super-PID controller requires an IR Tachometer to be mounted in such a way to see the spindle, which…
- Pobrania
- 24
- Polubienia
- 4
- Ocena
- 0
P
Printableshugabaloo
Lowrider 3 Dust shoe for the Dewalt 611
I mashed Philipp's Improved dust shoe design with the original V1E shoe so it fit the Dewalt 611 and could use the bristles from the the original. Philipp's design is for a different tool and while I did get it to fit and test it, the…
- Pobrania
- 24
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBTHRE3D
Hair Straightener Holder (combo of 161167 and 421296)
Merged the ideas of @JBear40_ and @Daniele for a adhesive based slanted hair straightener holder. Tested and works with Revlon Straightener Model RVST2174
- Pobrania
- 23
- Polubienia
- 3
- Ocena
- 0
P
PrintablesZvenk
Wolfcraft MG600PRO/MG611 Caulk Gun Holder/Hanger
I use my gun with liquid nails in my small cabinet shop a lot and needed a practical holder. Added a small drip tray on bottom with small storage for caulkblockers as well. I designed this holder to use it on side of my mobile toolcart.…
- Pobrania
- 22
- Polubienia
- 3
- Ocena
- 0
P
PrintablesIgor Ko
C.C. Packard shutter (re-render of work by Spiketin https://www.flickr.com/photos/145497036@N02/albums/72177720316113882/)
re-render of modern interpretation of vintage 1890s patented by C.C.Packard leaf shutter, remixed from published on flickr blow-up diagram. Used image to 3d model on Makerworld with export to .stl Powered by MakerWorld-Image-to-3D (…
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 0
P
PrintablesB&B TECH
Makita AN611 Siding Nailer Valve Sheet
Makita AN611 Siding Nailer Valve Sheet, print in TPU like material. 0.1mm layer height, all perimeters and i bet this will last longer than the cheap rubber ones as it was designed to be a little thicker in some parts. Category: Tools
- Pobrania
- 20
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDannyMac
Internal Chassis Replacement for Centris/Quadra 610 & 660AV, Power Macintosh 6100/60, Workgroup Server 6150, Performa 6110CD, 6112CD, 6115CD, 6116CD, 6117CD, & 6118CD
This is an Internal Chassis replacement for the wide "pizza-box" style Apple Macintosh computers from the 90s that included an internal CD-ROM drive. Specifically, this part is for the Centris 610, Centris 660AV, Quadra 610, Quadra 660AV,…
- Pobrania
- 19
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMindutis
Knipex Gridfinity Flush Cutters 7861125
Simply a remix for my personal taste. Saves a bit of filament. Most importantly - added protection barrier to protect fingers from touching sharp cutting-nose.
- Pobrania
- 19
- Polubienia
- 6
- Ocena
- 5
P
PrintablesOld_English_Workshop
Dewalt DW611 Dust Shoe
This is a dust shoe for the Dewalt DW611 router. The screws to attach to the lower base are 1/4-20" x 5/8" SHCS Long These are the magnets used, 10mm x 3mm and hot glued into the upper shoe.…
- Pobrania
- 18
- Polubienia
- 10
- Ocena
- 0
P
PrintablesShmoee
slightly less springy Lowrider2 Dewalt DW611 pen holder
This is a remix of Tailslide's DW611 Pen Holder. I got rid of the zipties and use screws. I also tried to take out some springiness (I printed in PLA+ and it is still very springy). The two smaller pieces are superglued to the underside…
- Pobrania
- 18
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDaniel Dunn
Laser Mount for LowRider CNC DWP611
This is a laser mount that uses the existing and stock Dewalt DWP611 router mount and a JPhotonics 7watt laser with spindle mount hardware (1/4" shaft). The only hardware required is single M5 25mm screw. This works for the Lowrider CNC…
- Pobrania
- 17
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSolarity
Celestron Spotter Scope 9x50 Dust Caps (51611)
Celestron Spotter Scope 9x50 Dust Caps (51611) from a Celestar Deluxe that was manufactured in the late 90's
- Pobrania
- 17
- Polubienia
- 0
- Ocena
- 0
P
Printablesmaker_rachael
Brick Compatible (49753 / 76116) Mechanical Arm with Thick Support
This model is compatible with major brick brands.
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJaroslav Dolejš
Vacuum cleaner Sencor SVC 611BL adapter C holder
I rather used PC to print this but other materials may probably be OK as well
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
Printablesdroidxbrad
DWP611 Dewalt Spindle mount for chinese 6040 and 6090
This was created to replace the stock spindle mount and upgrade the “spindle” to a dwp611 router. Save the linear slide bearings and plastic worm drive gear of the stock part to reuse them as i designed this to work with all existing…
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJaroslav
Spring seat for clutch pedal Volvo XC90 - 3546113
Spring seat for clutch pedal Volvo XC90 - 3546113
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
PrintablesShane Nyboer
400EX/X Seat Bushing (17611-HA5-000)
Seat bushing replacement for Honda Part # 17611-HA5-000. Save yourself $5 and print it for under 20¢ in material. Personally used on a 400EX but can work for all others with same part number (300EX, 250R, 700XX, etc). I've been replacing…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
Printablesdim20
Suzuki Ignis Side Air Vent Flap Linkage/Comb (73611-81A0)
This part should also fit for other Suzuki models such as the Jimny and possibly Wagon R+ related cars (i.e. Vauxhaull/Opel Agila) of the same era. I HIGHLY recommend printing this in a material that can withstand the heat. I went with…
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesShmoee
LowRider2 Dewalt DPW611 CNC plate in two halves (25.4mm)
Credit to Ryan at https://www.v1engineering.com/ for creating great DIY CNC options, and to peterfosseus here: https://www.thingiverse.com/thing:4834949 for the idea and OpenScad code to split this 25.4mm Dewalt DWP611 router plate into…
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCouchPrinter
Skadis Halter Prym 611992 Ölstift - Holder Prym 611992 oil pen
11.03.2024 - Update : die STL, STP und 3fm Dateien wurden ausgetauscht. Die Bohrung ist um 0,2mm zu große gewesen, was das ganze etwas zu locker machte. Ist jetzt berichtigt. the STL, STP and 3fm files were exchanged. The hole was 0.2mm…
- Pobrania
- 12
- Polubienia
- 2
- Ocena
- 0