Liczymy pasujące modele…
I have been working on a custom build on the newbeedrone mosquito frame on and off for a while now and was not satisfied with all the issues and annoyance of trying to use rubber bands Printed with inland generic tpu, at 100% infill in…
Aufbewahrungsbox für INBUS® 73660 Schoneinsätze mit Größenangabe. Ich habe die Box in PETG gedruckt, da ich sie im Auto aufbewahren möchte. Storage box for INBUS® 73660 protective inserts with size specification. I printed the box in PETG…
Background The design was originally intended to be made from aluminium — and it still works perfectly that way. The geometry is simple enough that it can also be done with basic hand tools and a drill press, no CNC or mill required.…
Print with ABS or ASA, no supports needed. Split camera holder to have separate top cover. Run your camera wire in an inner side slot of the front left profile. No disassembly, just push the cable under the tensioner. I use original…
2 cases for the OV3660 3MP camera board/module with the small lens. Probably fits other board of the same form factor but I can't guarantee as I only have the ov3660. Minimal case is as small as possible and only includes a hole for the…
This adapter is specifically designed to make the Givi BF25 tank lock system compatible with the Aprilia Tuareg 660 . It serves as a bridge between the bike's tank and the Givi flange. ⚠ IMPORTANT INSTALLATION NOTES: Screws: To install…
Just wierd case. Printed with petg. It is necessary to remove the audio jack module in order to route the wires to the battery.
Inspired by ohanhi design, I created my own 44mm variant stand with extended plateau for a better stand. The 6660 fritzbox gets sold in different variants. The rented versions are usually the bigger one, the 44mm version seems to be the…
Small storage compartment for Aprilia Tuareg 660 that can be installed next to the lithium battery. Suitable for model year 2026. Maybe also 2025? Perfect for storing insurance papers (and some tiny tools). The box doesn't have any lid…
The original model fits perfectly, thank you @tokyo2ooo I added fillets to optimize printability. Additionally I made the model 120mm long to fit my needs. I recommend printing the holder upright with a lot of walls for best results.
I modified the original version so it doesnt block as much of the notebooks air outlet
Compatible with: GiamaicaWorx Front Rack System (Front Rack + Device Holder) 🔗 https://www.giamaicaworx.com/front-rack-system/ If you're mounting a DMD T865, T880 using the road/adventure holder, there's also a adapter model for that: 🔗…
Modified from the IP6600D card tray STL. Converted card tray STL into STEP via FreeCAD and imported into F3D to convert it into a disk tray. Used the commonly available DIY template (see…
Replacement cruise control switch for the Aprilia Tuareg 660 (Tested on 2025 Rally pn: 2D000549). The OEM plastic switch breaks easily and is not available as a separate spare part requiring replacement of the entire control assembly.…
The hinge was broken on my paper input tray so I recreated the entire tray. I realized it was also missing the paper straightening flap that (apparently) automatically folds out. I recreated this flap from a few pictures, included in the…
The only pre-existing part I could find for this printer was the PVC card tray on Thingiverse. It was only available as a STL, so I used FreeCAD to convert it into a STEP file. You need to place silver tape, glue some foil, or use a…
This file is the rear I/O panel model file for the Asrock B660M-HDVP/D5 model. Although it does not fit perfectly into the ports, it can simply cover the rear panel in cases where there is no rear I/O panel. When outputting, if you set…
I wanted a headlight that pointed in the direction of the wheels. This bracket mounts to the steering stem cover with three 10mm nuts and bolts. There are two small backer pieces not pictured that together hold the bracket on by clamping…
Leifheit wandrollenhalter parat royal 25660 - Halterung Zewa Ihr braucht noch eine Welle zum durchstecken, hab ein Alu Rohr mit 15mm Durchmesser genommen. Hab das ganze auch als Part Datei hochgeladen, also kann man es super editieren.…
This bracket attaches to the wall via the screw holes in a standard US outlet box where you would normally screw in an outlet or switch. It then attaches to the WAP (wireless access point) using the bracket that is included in the box…
simple print in place negative carriers. print in PETG, no supports required. use pliers to hold outside of hinge with carrier main body then snap the pivoting core away. the outside bit and the main body move as one with the hinge…
Hello! I used the following designs to create this mount: CR-10 Streamlight Microstream Holster by i_need_a_better_name on Thingiverse SKADIS Universal Hook - base and modified hooks by galvanization I printed at 100% infill in PLA with…
nameplate/nametag for the pelicase 1660. 3mf and stl file so you can add your own text
Clamp for a RAM Mount Quick-Grip XL phone holder and Aprilia Tuareg 660 or other bikes with a 12mm crossbar. Clamp holds the device in a horizontal position. The clamp is offset 4 mm to fit better the Aprilia Tuareg display and…
Obudowa dolnej części przerzutki do shimano slx z roku 2010 -2013
This minimalistic vertical stand lets the FRITZ!Box 6660 cable modem stand fully upright like a skyscraper, instead of the long edge up like the other models I could find. This stand will friction fit around the modem and provide a flat…
The suction cup mounting screw broke on our Ken-Tech shower clock (https://www.amazon.com/dp/B001KA94T2) the clock still worked, but didn't have an easy way to use it since it won't sit upright by itself without the suction cup mount.…
This is a mounting bracket for 10" racks that holds the bare PCB of a FRITZ!Box 6660 Cable. It's recommended to have one 1U slot free before installing this. The FON1 and USB ports are sticking out of the PCB, so it has to be inserted in…
Ermöglicht die Montage des Synology RT6600ax an der Wand - der Adapter sorgt dafür daß der Router flach an der Wand anliegt.
This model is compatible with the lego system.
This wall mount can be printed upright, the bridge between the two rails feels a bit flimsy, but that doesn't matter as soon as all 4 screws are in. It works just fine, printing this model in PLA .
Aufbewahrungsbox für INBUS® 73660 Schoneinsätze mit Größenangabe. Ich habe die Box in PETG gedruckt, da ich sie im Auto aufbewahren möchte. Storage box for INBUS® 73660 protective inserts with size specification. I printed the box in PETG…
Just a Dust Cover Remixed for the Signal Generator to have a snug fit
There are already two available camera mounts on printables that fit OV3660, but I was not able to user either one of them https://www.printables.com/model/703993-voron-0-usb-camera-mount Great mount, but unfortnutely I bought a 110 fov…
My Zumo 660 cradle wiring bundle has 2 cables that I've never used. One appears to be a 3.5mm audio jack with a round 11mm housing. The other has a 2.5mm hole and an 8mm hex housing. I designed these caps to protect the jacks when not in…
These are pretty standard in motorcycles to mount plastic fairings. 8.5mm inner diameter makes it just a touch tighter than original providing a snug but not too tight fit. Printed in Bamboo TPU HF on P1S printer 50% gyro infill but I…
I didn't like to mount my phone on the bars or above the dash therefore created this beefy blinker stalk to attach the RAM clamp just above the usb charging port. Have at least 3000 offroad miles on it at this point with zero issues and…
This is an Internal Chassis replacement for the wide "pizza-box" style Apple Macintosh computers from the 90s that included an internal CD-ROM drive. Specifically, this part is for the Centris 610, Centris 660AV, Quadra 610, Quadra 660AV,…
blade guard wants to get in the way when going in to a board at an angle, or other instances. Used a cabinet backboard nail as hinge (2mmØ) and some random bolts i had laying around for attaching it to the saw
Currently testing v.0.9. Looks like the stand itself has been removed from evasolo.com. https://www.evasolo.com/en/furniture/accessories/tv-stands/carry-tv-stand-on-castors-stainless-steel
I kept losing the rubber feet at the bottom of my vornado and it kept sliding around and vibrating on counter so I modelled a replacement. Printed in TPU.
J'ai conçu cette pièce pour tenir bloc disque sur le cadre de ma moto, j'ai fait différents essaies et celui ci tient bien et ne bouge pas. J'ai imprimé en PETG avec avec couche de 0.2mm, c'est maintenu par 3 serres câbles plastique…
Before you print 3dp fc660 v3 OLED hand wired mechanical keyboard Here's a more recent version of this keyboard with optional OLED support. Printing Before printing, make sure to orient the pieces correctly. Flip the plate pieces upside…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
This is a very quick-and-dirty remix of a Sony a6600 cage made in Tinker CAD. It hides an AirTag in the hand grip. There is nothing holding/clipping the AirTag in place, other than the body of the camera. The printed example was made with…
This is a slim grip extension for a Sony a6600 camera. It holds a single AirTag under the battery compartment. The AirTag on the non-door model is held-in by gravity and there is no clip or cover holding it in. The hinged door model has a…
A simple webcam mount. Made with some degree of height adjustment. IF your webcam has a ¼ tapped hole id recommend Lufas Bolts, they work great and come print ready in a few lengths no washer required.…
This is a replacement cap for SEB YG660100 yogurt maker jars, designed to fit snugly and seal well, just like the original. 🔧 Features : Compatible with SEB YG660100 yogurt jars Precise geometry for a secure, leak-resistant fit Includes…
I could not find a cradle for the a6600 so I made my own :)
Die Monokey Kofferhalterung wird am Montagepunkt des Rücklichtes/Kenzeichenhalerung Verschraubt. Orginal von Triumph ist eine Dichtung an der Fläche verbaut. Die Givi Halterung ist komplett ungeschützt und lässt Wasser direkt in das…
A working model of ASD1660 Toolholder from PeWe-Tools. Created for Holding a Dial Indicator. This will fit in a Multifix AS16. See here: https://www.prusaprinters.org/prints/134855-holder-for-dial-indicator I recommend printing all the…
Extended version of a hot shoe grip for a6000 series cameras. This allows for some access to mode knob while not interfering with the standard Sony eye piece cover. Pictures show how the model fits on an a6600 and an a6300.
I hate proprietary Vacuum hoses, adaters and accessories. The Makita backpack vacuum has smaller than average hose diameter and the accessories mount the other way around as others. This simply would not do, so I had to adapt the Makita…
This is a custom-made Waterpik holder for the WP-660 model I made for my bathroom. It screws into the bottom of the Waterpik via 6-32, 1-¼ in machine screws. This model is imperfect, and I welcome anyone to come and make additions to this…
Remix of Nick's MPCNC dust shoe ( https://www.thingiverse.com/thing:2797108 ) and ZQ8Blazer's ( https://www.thingiverse.com/thing:2908356 ) for a 2.5-in. shop vac hose with a support rib and taller hose insert. I had to increase the…
This is a Industrial control rack for controlling stepper motors. The main rack mount takes M6 heat set inserts, the PC104 takes M3 inserts, the TB6600 rack takes M4 inserts.
A minimalistic mount OV3660 on an aluminum extrusion. I designed this to mount on Voron 2.4's Gantry so I made it as compact as possible as it's going to share space with multiple accessories. Use M4x20 screw Get camera casing parts from…
Cheap webcam implementation to AD5M Flashforge sells camera kit, but it's kinda expensive in here, so i wanted to go to cheaper route. You need: (Maybe) Klippered AD5M - Haven't tested with the original firmware so it might work or it…
OLEO-MAC Lawnmower Throttle Lever 66070341AR – replacement throttle handle for lawnmowers. Designed to restore full control over engine speed, compatible with selected OLEO-MAC models. Durable and easy to install.
English description below Maßstab des Modells ist 3:1, das Gesamtgewicht inklusive Stahlwellen 240g. Verwendete Materialien: Prusament PLA Jet Black OWL PLA Weiß (RAL 9016 Verkehrsweiß) OWL PLA Rot (RAL 3001 Signalrot) Fiberlogy FiberFlex…
Shelf for the Asus AX6600 mesh router unit. I added multiconnect rails at the back so I could hang it on my my multiboard. It's flipped around so I can access the cables and because it wouldn't fit on the shelf otherwise.
2 Höheneinheiten Modell muss wahrscheinlich im Slicer geschnitten werden. Gedruckt ohne Stützen
It works, printed with TPU 85A, 15% infill. Less infill, softer it is.
I designed this mod for converting a rx 6600 sapphire pulse to itx and suit my case, the gpu has a total of 172mm length and uses two 80x10mm fans, I had to cut and crimp the fans cables to the original PH2 4 pin connector, the gpu…
Scanned with a Creality Raptor X and applied to Gridfinity via the Autodesk Fusion plugin. V2 has a slot for a USB-C to Micro USB adapter. I bought this one: https://www.amazon.com/dp/B0CDP9JWVY
Print it with high temp materials like ABS ASA PA or PC. Also fits 3652 G2 motors. Original design by Burak Ozcan
Background The design was originally intended to be made from aluminium — and it still works perfectly that way. The geometry is simple enough that it can also be done with basic hand tools and a drill press, no CNC or mill required.…
This configurable coupling generator (couplings_parametric.scad) is capable of producing an X8031 (Hornby/Bachmann), X9660 (Dapol/Hornby/Airfix) and Hornby dovetail (hornby's NEM socket socket), with and without hooks. Usually the real…
Remix of Ereen's "TB6600 Rail Clip Mount", altered to use M3 Heated Inserts. Modifications: Extended Base to fit full width of TB6600 variant Thickened mounting surface to accommodate using M3 Heated Inserts (3.5mm→7mm) Added Fillets to…
One model for printing by TPU(smth like 95a) and another for petg/abs/etc. filament. TPU model just print and put a case on the phone. Petg model need M2x8 screw. Supports needed
To allow wall mounting , I reused the mounting hole design from this model: https://www.printables.com/model/998011-darth-vader-lego-toilet-paper-holder It allows you to securely attach the base to the wall with two screws. To attach the…
unscrew the two mounting bolts for the passenger footpads and use the same bolts to mount this to attach straps or bungees to secure items to the seat of the motorcycle. Countersunk holes prevent snags.
Print with ABS or ASA, no supports needed. Split camera holder to have separate top cover. Run your camera wire in an inner side slot of the front left profile. No disassembly, just push the cable under the tensioner. I use original…
lego 3070 3069 63864 2431 6636 4162 14719 3068 26603 87079
2 cases for the OV3660 3MP camera board/module with the small lens. Probably fits other board of the same form factor but I can't guarantee as I only have the ov3660. Minimal case is as small as possible and only includes a hole for the…
It has sufficient cable space, and space from the wall not to affect antenna tuning.
Light stand power supply mount for the Neewer 660 video light and similar power supplies. Requires a 3/4" Velcro "One Wrap" tie to mount. More info: https://www.partsnotincluded.com/3d-printed-light-stand-psu-mount/ Category: Camera
This adapter is specifically designed to make the Givi BF25 tank lock system compatible with the Aprilia Tuareg 660 . It serves as a bridge between the bike's tank and the Givi flange. ⚠ IMPORTANT INSTALLATION NOTES: Screws: To install…
Disclaimer: This model is part of a larger collection of ZX-4R 3D scans that I have on my profile. All models were scanned with my Metro x laser scanner at 0.2-0.3mm resolution. If you have managed to break any of the parts, you can use…
Scale Sciex 6600 Mass Spec. Prints in 4 parts that are glued together. Category: Engineering
Just wierd case. Printed with petg. It is necessary to remove the audio jack module in order to route the wires to the battery.
Replacement Name Plate modeled for Shimano ST 6600 Ultegra
Inspired by ohanhi design, I created my own 44mm variant stand with extended plateau for a better stand. The 6660 fritzbox gets sold in different variants. The rented versions are usually the bigger one, the 44mm version seems to be the…
Small storage compartment for Aprilia Tuareg 660 that can be installed next to the lithium battery. Suitable for model year 2026. Maybe also 2025? Perfect for storing insurance papers (and some tiny tools). The box doesn't have any lid…
Little chute to redirect output air from DW660 to blow onto the cutting area. Two little pegs are intended to fit within the output ports to hold it in place. Two holes near the top of the part are intended for #6 sheet metal screws to…
Disclaimer: This design is an independent creation and is not affiliated with, authorized by, or endorsed by the LEGO Group. It is designed to be compatible with standard building blocks. This brickvariation corresponds to the Lego Roof…
Using bambustudio - I re-mixed the original flat top swingarm cover on Thingiverse https://www.thingiverse.com/thing:7102387 & re-mixed the top yoke plug from Printables, to make a rather nifty swingarm pivot cover with the triumph logo.…
This is a taillight lens for a 1964 Rambler Classic 660 printed with petg transparent red, still dialing in the settings
The original model fits perfectly, thank you @tokyo2ooo I added fillets to optimize printability. Additionally I made the model 120mm long to fit my needs. I recommend printing the holder upright with a lot of walls for best results.
I modified the original version so it doesnt block as much of the notebooks air outlet
This is a electric motor mount with a mount for the gear box intended for my Redcat Earthquake 3.5. The Gearbox withstood my rc car and motor, but it lowers the speed as intended. This is only my second model so if there's anything i can…
Compatible with: GiamaicaWorx Front Rack System (Front Rack + Device Holder) 🔗 https://www.giamaicaworx.com/front-rack-system/ If you're mounting a DMD T865, T880 using the road/adventure holder, there's also a adapter model for that: 🔗…
Support Mural pour Robot Laveur de Vitre Alfawise WIN660. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: Geeetech PLA Black Category: Organization
Modified from the IP6600D card tray STL. Converted card tray STL into STEP via FreeCAD and imported into F3D to convert it into a disk tray. Used the commonly available DIY template (see…
Replacement cruise control switch for the Aprilia Tuareg 660 (Tested on 2025 Rally pn: 2D000549). The OEM plastic switch breaks easily and is not available as a separate spare part requiring replacement of the entire control assembly.…
The hinge was broken on my paper input tray so I recreated the entire tray. I realized it was also missing the paper straightening flap that (apparently) automatically folds out. I recreated this flap from a few pictures, included in the…
