Liczymy pasujące modele…
Collection of Gridfinity basic cups height 9 (67mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
This an Airsoft Spring Loaded BB pellets grenade. 67 x 94mm For maximum spreading performance, load it with 50 to 60 BB (30 on each side max) Printed in PLA matte Sunlu 0.2mm layer height 0.4mm nozzle 4 Walls Thick 20% Infill Support…
Golf ball sized (42.67mm) balls with various surface textures. Each ball is printed as two identical halves and are held together using two permanent locking pins . No adhesive or supports are needed. I would not recommend that you hit…
A extra slim lens/photography filter case with magnets (6x2mm). Fits 77mm, 67mm, 58mm, 52mm and 45mm Filters. 92mm x 87mm x 10mm Maximum filter thickness 7mm
Do you need to attach a ND filter to your iPhone 17 Pro or Pro Max? Here's a solution. A total of 10 magnets are required. Magnets should be 10mm x 2mm . Glue magnets into each of the 5 depressions on both the base plate and filter ring.…
FDM -> It is recommended to use a layer height below 0.15 for printing. It is recommended to use LCD or SLA for printing to obtain higher precision. "A series of high-precision bullet models." In order to meet the needs of military…
I did this adapter to use together with the case from YGroza “https://www.thingiverse.com/thing:5694589”, I have tried it with the TPU case bought in the store, and it works fine too but I couldn't check if it fits the other cases, if…
Spray can holder for wall control pegboard. The can shown is 67mm.
A Pixar Luxo Jr. themed ball that requires no AMS, AMS Lite, MMU, or any other automatic material changer. Parts are held together using miniature locking pins. No adhesive necessary. The 70mm sized ball is ideal for juggling and the golf…
Fast and light adapter, kinda screw in, holds with friction. 52mm (lens) to 67mm (filter) Prints in about 20 minutes
permet de fermer les boites d'encastrement proprement en D: 67 , imprimé en PETG sans support.
Eine Abdeckung/Abdeckkappe für Zaunpfosten 67x67mm (Innenmaß)
Quick little remix to work with the 67mm Gspeed Gshot builds. 38mm mounting accepts TGH and 3 gear Axial. Also more than likely accepts Enduro Stealth X transmission.
This is a remix of the Chimes_Industries wheel, built for installation on 12mm RC models, easy to install and removable
Infil 100%, 0.15mm PETG, supports - yes.
needed a simpel spray can holder for wallmounting with drywall screws
This model will serve as the housing for solar film (sold separately) to create a complete solar filter, safe and capable of imaging the sun and its sun spots and faculae. Print one inner filter, one outer filter, and two caps. Cut your…
Moving into larger glass and your previous lens cap holders letting you down? Me too! That's why I recreated my favorite lens cap holder, but now for the 67mm Sony Nex lens caps. Just like its smaller siblings, this strap mounted lens cap…
58mm / 67mm / 77mm lens cap holder for Peak Design wide strap. Tested with modern Canon lens caps. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: .12mm Infill: 100% Filament: Prusa Research…
Stelzen in der Höhe von 33-167mm für Garteneisenbahn LGB Spur G: 33mm 43mm 65mm 133mm 167mm Update 1. Juli 2025 - weitere Höhen verfügbar: 150mm 116mm 82mm 20mm Stelzen bestehen aus jeweils 2-3 Druckplatten: 2 Stelzen Seitenteile mit der…
Cache pour Boîte d'encastrement 67mm
A clip to hold your 49mm/67mm lens cap, for your camera backpack strap, jacket, belt or pocket. I edited the lens cap buckle to be more minimalist and compact, and combined with the clip to be printed on its edge without supports.…
That's an adapter to use DSLR/Mirrorless filters of 67mm on the iPhone 13 with a silicon case, for other types of cases need to test fit first.
I used recommended standard quality in Cura and printed on Ender 3 S1 pro. Tested with torque wrench on 20Nm
This macro converter allows you to hold a ø67mm lens through its lens hood fittings. This converts any telelens with a ø67 mm diameter into a macro lens. Disclaimer: this model is missing any locking mechanism to hold the camera and…
i use a 0.8mm nossle 5 walls and 15% gyroid for printing this
It's designed for a 67mm cap, since I don't have another lens, so I haven't tried other designs, but remixing remains enabled, so you can edit it if you like.
AstroSolar filter & mask holder for camera thread 67mm
Adapter the final part to fit our smaller diameter. Added some structures for printing support.
This is a slim and small lens cap holder for 67mm lens caps. I drew this for my fathers Nikon D90 as a birthday gift :) It fits for 67mm lens caps only! If you need a smaller or bigger version let me know! First I printed the "normal"…
This object consists of helping to drill three consecutive holes with a hole saw of diameter 67mm. This avoids alignment problems between each hole whether vertical or horizontal. The two rectangular holes that you see are used to place 2…
This is remixed adapter ring that fits lenses with 67mm filter thread to use with lee filter 100 system.
Been wanting a lens caps holder like this for a while after losing too many to pockets, backpacks, setting them down and forgetting, etc. The lens cap just clips in and is held by friction, I tried some kind of overhang to lock it in but…
Perforated Kilner Jar lid used for soaking and straining chick peas.
Description: Born from the depths of forgotten caverns, Voidscale is a fierce crystal dragon designed to stand out instantly in any fantasy miniature collection. With razor-like scales, massive wings, and a powerful stance emerging from…
This part can be ordered printed here: https://www.justway.com/project/shareproject/Aeropress_Fellow_Flow_Control_67mm_cup_adapter_1864e1a3.html This is an extremely specific adapter to fit the Fellow flow control Aeropress filter to very…
I used silicon at the back to support those two small screws to hold it firm. Actually, you should never hide your extinguisher, but as a compromise you can make sure you know where it's is. Every time you open the door you get the…
Elevate your soldering station's functionality and aesthetics with the "TipCleanerTrove 67mm - Gridfinity Remix", a redesigned holder specifically for a 67mm soldering iron tip cleaner. This model seamlessly integrates into your…
Lens cap mount for 45mm wide Peak strap. The mount has a 10° chamfer to make the cap sit very firm. I shaked the holder hard with the 77mm cap mounted and it wouldn't come loose. UPDATE 08.05.2026 - Added an model with space for 82mm cap
This is a support for fitting smaller downlights in a pre-existing hole, the insert is added to the upper side of the hole and is glued or taped in place, it allows plaster to be added in the gap between the existing ceiling and the part…
I threaded this so you can put in lens filters.
Zátka/krytka venkovního sloupku na plot ( vnitřní průměr trubky 67mm)
These parts fit a generic Diesel heater sold on Amazon under the OMT, Orion Motor Tech brand. It is thin and tall. The legs fit a 167mm base. There are also two parts in there to convert it for a top cover only or top and two sides. This…
Having trouble installing your flush-mounted box cover due to your rolling shutter module? No worries! This cover creates extra space, making installation quick and hassle-free. Enjoy a practical and efficient solution to easily install…
An ASYMETRIC 64.5 - 67mm vacuum cleaner holder
These are 3d printed rods for replacing the M8 threaded rods needed for this IKEA drybox model: It prints alright vertically in a core-xy printer - even though it already flexes around on top. Use a brim for adhesion. Bed slingers…
A simple filter adapter for 67mm lens filter size to use 95mm filter. Since I create the 100mm to 95mm one, I might as well do this size since it's more common on Pentax6x7 lens. This one needs to put together by glue (I use super glue).…
Keeps your lens cap on the strap instead of in your pocket, in the bag, or on the floor of a parking lot. Prints in under ten minutes from whatever is left on the spool. Fits — the cap Any 43mm-67mm center-pinch lens cap. Retention is on…
This is a functional replacement cap specifically designed for glass bottles with a 67mm outer diameter . To ensure a secure and reliable fit, the internal diameter of the model has been adjusted to 66.9mm . This slight offset provides a…
This setup allows you to mount any standard 67mm camera filter, such as a CPL or ND filter, directly onto your phone for mobile photography. It pairs a tailored SlimSkin case with a custom ring converter, featuring a built-in recess to…
A double hanger for wet/dry vacuum hoses! For a 2" (50mm) hose, go to the original design, masterfully created by Peter H ! Your slicer may object, this should fit a 256x256x256 printer- but you may have to manually move it to fit your…
I printed it with the following settings: Material: ABS Layer height: 0.08 mm Infill: 20% Supports: No Magnets ⌀2mm x 1mm are needed.
67mm Camera Filter thread to Logitech StreamCam Adapter. Printed in 0.1mm on 0.4mm nozzle for best camera thread.
made this for my hanimex 300mm f 4 but chould fit everylens with an outside diameter of 67mm it comes with a standard 1/4" threaded hole for mounting to tripods
This holder can be used with solar filter sheets, like Baader Astrosolar, and fits lens with 67mm threads. The back piece of the holder is wide to shade camera body from sun heat. Cut a 70mmx70mm square from the solar filter sheet, put it…
These are 3d printed rods for replacing the M8 threaded rods needed for this IKEA drybox model: It prints alright vertically in a core-xy printer - even though it already flexes around on top. Use a brim for adhesion. Bed slingers…
I uploaded this for convenience, if you want a can dispenser for these small cans without having to download autodesk fusion and adjusting the parameters yourself. All the instructions from the original model by @Whity apply
Ventilation grid for SDK hole 68mm with support for print Větrací mřížka pro sádrokarton díra 68mm s podporou pro tisk
Holder for drinking bottles. I used PLA and PEGT with 80% - 100% infill.
I have never bothered to buy the official base as found it to be flimsy and hollow. After long time of improvising I have decided to design my own bulky base to hold sharpening stone steady. There are three parts in my design. Bottom pad…
A simple protective cap for Nauticam N120 flat macro port, 67x0.75mm it thread. Category: Outdoor & Garden
Simple grip replacement for a sony lens cap might need to heat up the arms and stretch it a bit out to make the gripper work ---- Update 1: Made the chamfer better to grip the lens
Prints in just two parts and clips together without screws or springs. Designed for PLA+ filament and requires supports . Print one 1x body with your selected design and 1x spring
Model of the .425 Westley Richards Magnum cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale. Use superglue to conect the parts. Casing is made to be ligth and cheap to print, if you…
Nothing special :-) Two versions are available: 70 mm and 80 mm height. Please let me know if you need further information/data. Print Settings Printer brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 mm Infill 15% -…
Simple cover for 67mm flush-mounted electrical boxes. Easy to print, fits standard recessed boxesSimple 3D printable cover for 67mm flush-mounted electrical boxes. Easy to print, fits standard recessed boxes
Skadis-compatibel 67mm diameter holder - e.g. for 400ml Isopropanol can
made this for my hanimex 300mm f 4 but chould fit everylens with an outside diameter of 67mm it comes with a standard 1/4" threaded hole for mounting to tripods
This holder can be used with solar filter sheets, like Baader Astrosolar, and fits lens with 67mm threads. The back piece of the holder is wide to shade camera body from sun heat. Cut a 70mmx70mm square from the solar filter sheet, put it…
I uploaded this for convenience, if you want a can dispenser for these small cans without having to download autodesk fusion and adjusting the parameters yourself. All the instructions from the original model by @Whity apply
The Bike Phone Holder is very useful to use navigation or music while biking. These two size of vertical holder works with the horizontal holder 70-80mm and the holder locks provided in the original model linked. Another enhancement:…
Overview Don't throw away your empty tuna cans. This utility lid converts empty 67.00 mm diameter cans into robust, interlocking storage bins for screws, resistors, hardware, or small parts. The design features a recessed top profile,…
Customized version of http://www.thingiverse.com/thing:9860 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=9860 Instructions Using the following options: mount_lip_height = 0.1 circle_sides = 70…
This remix was changed diameter off the hole for my bottle of 67 mm The original model is: https://www.thingiverse.com/thing:4562303
Resized Grease Jar from Thingiverse thing:1654011 by Shinny Toaster. I needed a larger diameter and a deeper jar. Remixed from original. I have included photos, STLs, and GCODE for i3 MK3S. Print instructions Remixed Grease Jar for…
I needed this for a specific project so function was more important than form. And I'm still learning Fusion, so I just simply extended the model. Process was import .stl to Fusion, clean the mesh surfaces as best I could, and lengthen to…
Modified Caesar1511's bottle holder to fit 67mm diameter bottles
Two lens cap holders I printed using the remixed parametric design. The lens caps are for my Sony 20mm f1.8 G lens, Tamron 28-200, and Sony 55mm f1.8 Zeiss. The second (triple) lens cap is for a friend who has a Sony GM 24-70 GM I, Sony…
Made a remis of this one, https://www.thingiverse.com/thing:2485988 , to fit on my 67mm screw mount. Now i can glue in a sunfilter. Category: 3D Printing
To be mounted with MultiConnect
For best results, print with supports using a material like PETG, ABS or ASA at a high detail level (0.12mm or better)
Simple screw-on wall holder for standard spray cans or soda cans.
