Liczymy pasujące modele…
Scania R730 model RC wymaga klejenia i zaopatrzenia się w śruby m3 różnych długości. W razie problemów z włożeniem tapicerki do kabiny można z niej zrezygnować. Łożyska 6700 ZZ
To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Just printed in PETG orange / black. To hold the cap down i insert two magnets (4,5mm x 1,5mm x 9,5mm). MMU…
The 285mm long Scania tractor model features steering and freely rotating front wheels. The model was printed entirely in PLA, with a quality of 0.10 and 0.15, depending on the size of the part. To add a touch of realism, we printed the…
Reupload of the 7300 side rails designed by IU1OPK . No changes made as per original license. Print them standing - if you print them horizontally, the side forces you are protecting your rig against can easily cause layer delamination.…
Inner guard liners for the MJX 1/7 Citreon C3 Rally Car. UPDATES RE-TWEAKED FRONT GUARDS FOR NEW TYRE FROM ALIEXPRESS WHICH CAUSED RUBBING ON INNER WALLS ON FULL LOCK May look like an already available set on the market, but after seeing…
There are many similar brackets around for many different radios but none for the Icom IC-2730 , so I made one. I used cheap M4x8 socket head screw from a kit, they worked nicely but I feel that they are just a bit smaller than the holes…
Nothing special, almost any filament will do. 0.2 layer height, double-sided tape to attach.
To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Printed in PETG The frame STL is identical to the original, only the lid has modifications.
The frame designed by AndrewBrierley for the ICOM IC-7300 looked great, but I couldn't fit it in my printer, the part is 280mm long. In order to print the item I needed to cut it in half. You will need to print two of each part, the A…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
A simple mic hanger for my Icom-7300. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: .20 Infill: 20% Filament: hatchbox PLA Notes: I used tree supports with overhang over bed only.…
Designed for the Craftsman CMST40730 small parts organizer. It's slightly tapered – shorter side points downward.
Maïdou Doublé Voodoo Mentor of New Orleans 1730* Born in the West African kingdom of Dahomey (present-day Benin) Some strange voodoo prevented me from attributing her as being the mentor to a specific person in history. every time I…
I was using a piece of a 2x4 for holding up my radio at the right height. I decided to make a 3D printed stand with different height's so others could adjust them to their view. I sometimes record the audio and the radio settings, so with…
This model is compatible with the lego system.
This is a protective cover for the front of an Icom IC9700 or an Icom IC7300 Amateur Radio Transceiver. The front face plates of both of these Icom radios are identical and so for those of us lucky enought to own both, two print runs will…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
EDIT 01/11/24: V2 version is here. Few changes compared to V1: reduced weight/dimensions by roughly 50% (V1 weighted at 72.7grs, V2 at 37.2grs with 15% infill) larger access holes (10mm) to more easily access the screws holes increased…
Originally published here: Samsung Galaxy A8+ a730 case by tato_713 - Thingiverse Thanks to Vince Korz for testing the test this case. Some of the models are designed for rigid materials and others for flexible ones. The models materials…
This is a simple stand to use the Zyxel NR7302 indoors. It might also be compatible with the NR7301 and NR7303, but this is untested. To mount the Zyxel NR7302 to the stand you need 4 M4x15-20 screws.
A semi-faithful reproduction of Shimano's iconic Shark Fin, which “keeps the chain from jamming between the tire and chainstay” according to the original packaging. Attach to your bike using zip ties and/or double-sided tape. Please note…
Same model, just added holes for insertion of 6x2 magnets. Printed in PETG with tree supports. Added a bit of epoxy on the top of the magnet to hold it in place, but probably not needed.
The clips are really tight. You have to trim the plastic rail stop so the clips can fit. The rail stop doesn't seem to be necessary, as the window, at both maximum and minimum positions, is nowhere near the stop.
It can also be used as a modification to connect the CG-3000
I loved the original stand but noticed that there was no space to store the cleaning brush, so I thought I'd add one! I also added lips to the side compartments as I thought the attachments may fall out due to my clumsiness when being…
Nockenstapelgetriebe für Bernina-Nähmaschinen 730, 732, 830, 831, 832, 840, 850 To replace the broken plastik part or use it as negativ for a mold
Mount your Philips beard trimmer vertically, for example, in a bathroom cabinet. Remember to get it high enough to plug the charging cable in, and low enough to be able to drop it in easily. This prints as a single piece, with a little…
Je to rám pro ScaniiR730 od MLmodel. Celý model ScaniaR730 je možné zakoupit na www.mlmodel.cz. Upozorňuji že rám nebyl testován na modelu. This frame is designed for the Scania R730 by MLmodel. The complete Scania R730 model can be…
Connect your headset to your TRX. All connections fit into this small box. The box fits nicely on the side of the TRX. Holes are 6mm and 8mm offset. Holes for magnets are 10 to 1mm. If you have any questions you are welcome to write. Vy…
Imported from my designs on Thingiverse. Original upload was 27.03.2019 (dd.mm.yyyy) 3Dtommy requested this and helped me test all the iterations. Wait for the model to cool down or else you might screw up the tension. I tried mine when…
Subaru Overhead Ham Radio Mount (Icom 2730A) Vehicles It Fits: Outback 2015-2017 Possibly 2018 and 2019 as well. Forester: 2014-2016 WARNING: I am not responsible for any damage to your vehicle. This project will permanently alter your…
Nockenstapelgetriebe für Bernina-Nähmaschinen 730, 732, 830, 831, 832, 840, 850 To replace the broken plastik part or use it as negativ for a mold.
They are supports for the ScaniaR730 model. It is good to avoid fatigue of the leaf pens. Fold according to the photo and screw through with an M3 screw. Jsou to podpory pro model ScaniaR730. Je to dobré aby se zabránilo unavě listových…
I purchased a new mount for the control head of my Icom IC-2730A amateur radio. The mount uses the standard AMPS profile mounting pattern, but the radio has a custom spaced mounting pattern. The adapter plate sold by Icom was 40 bucks so…
Tato upravená palubní deska je pro model ScaniaR730 v měřítku 1/10 od MLmodel a nabízí možnost vložení LCD displeje.Díky tomu lze rozšířit Sound & Light System od MLmodel. Model ScaniaR730 1/10 a Sound & Light System lze zakoupit na…
Needed to replace a broken nylon cam gear on an old Bernina Record 730. The model provided on https://www.printables.com/model/298486-nockenstapelgetriebe-fur-bernina-nahmaschinen-730- did not fit well, It appears to be a straight gear…
This is a quick and dirty remix that will work for a dell 710/720/730 server that mounts it horizontally to the wall
there are specific slots for both the nose/ear trimmer and precision shaver on the sides.
4 wall loops Tree supports
Karcher adapter similar to 69974730 connector for garden hose 19mm (ID). Printed using PETG 0.2mm. Good to apply teflon tape on the both sides (thread, hose) and elastic band in the empty space under the thread (like the original). I've…
Purchased a couple craftsman (model CMST40730) mini drawers only to find they did not come with any dividers. I searched for other models, but they were too basic and lacked indents in the bottom for the little lines, so I made my own,…
I run a home server and it's a custom build, and my H730 controller was running at 53° C year round. Designed and printed this 40mm fan bracket and used a Noctua fan, and it now runs at 39-40° C year round. There were heat sink variations…
standard version is for use with M1.4 or M1.6 screws Second version is designed for M1.6 brass threaded inserts.
We picked up the Shun DM7300 kitchen shears as they were highly recommended by the folks of Cook's Illustrated/Americas' Test Kitchen. Since we are going to keep them in a drawer, it seemed like a good idea to have something to protect…
Bonjour, Nos 500cb ont bientôt 30ans pour les plus vieilles (comme la mienne l'année prochaine!). Et généralement si vous avez les clignotants d'origine, ils finissent pendus au bout de leurs fils! Rien y fait même en rachetant la…
Jeep XJ 96 and older, blocks off the existing center air vent on the dash.
Got a Mac Mini M4 and a BenQ 27 inch 5k monitor (PD2730S)? Then this is the mount for you :) Attaches the Mac Mini M4 to the back of the monitor to hide the Mac and its cables away, for a clean desktop experience. Printing instructions:…
I designed a mount for the Icom iC-2730A because the manufacturer no longer supplies it with the radio, only as an accessory. I printed it on 3-wall PETG with 15% infill. I hope it's useful.
I utilize an HP T730 in my network as the backup node for my pfSense firewall and my piHole ad blocker. I also wanted to utilize it as the backup point for my main server's virtual machines and data NAS. Due to the small form factor of…
Because of the complexity of the part I have printed the lever on my resin printer.
I picked up a dishwasher, but there were a few pieces that were broken.
Jelikož se mi do ruky dostal vysavač Sencor SVC730GR jako funkční před vyhozením a neměl hadici, rozhodl jsem se vytisknout nástavec na hadici, kterou jsem měl z jiného vysavače. Průměr na hadici je veliký 42mm. Model následně potřebuje…
Created a parametric model that automatically adjusts the necessary features for a custom height riser that snaps onto the wire shelves in the Nova Kool RFU7300D fridge. The provided files raise the shelf by 1 inch. Change the “height” in…
This is a reproduction of the top bezel of the IBM ThinkPad 730T Tablet computer. You can find more information in my restoration video below:
Some very simple holder for mg3730/15 Philips trimmer
These wall mounting brackets can be used to mount a Dell NPS730AB power supply to a wall or other vertical surface (I mounted it to the side of my IKEA Lack enclosure). The holes are dimensioned for M4 mounting hardware. Support If you'd…
Remove the lower sheet metal castor bar. there is one nut on the bracket. remove the pin from the castor part with a tool. print this part and put the old castor back into it. reassemble.
Here is my version of Icom IC-7300 Keypad. 4 memo. Knobs used from aliexpress shop: https://a.aliexpress.com/_EHrIWoA Projet can be copy in thinkercad:…
This is a reproduction model of a battery enclosure for the IBM ThinkPad 730T tablet computer. The inside is designed to accommodate 6 AAA-size NiMH cells and 3 terminals. If you'd like to see how I made the terminals, please watch the…
This is a rack mount ear for 10 inch mini racks like the DeskPi RackMate.
I have a Philips MG5730 and I couldn't find a stand that could hold the trimmer and all its accessories, so I designed my own! The stand has slots for all the attachments, power cable (AU/NZ) and brush. My print settings Material: PLA…
This is a reproduction of the PCMCIA door cover for the IBM ThinkPad 730T tablet computer. For video of the full restoration, please see below:
Closing Cap for Kverneland Accord CX Discs Coulters (ref. AC495730) There are two different versions. The outside diameter is equal, but the inner diameter ist different (22 mm or 29 mm). Print instructions Supports: No Resolution: 0.2mm…
This is a reproduction of the original pen holder for the IBM ThinkPad 730T Tablet computer as well as a custom version. 730T_door_pen - this is the original model that has a lever to help eject the pen. This can be difficult to print so…
Shelf for spices (Cooker hood BEKO CWB6730X)
This model is made for the specifically for the DJI air unit antennas but should fit any other similar antennas. Let me know if you want any changes to the design send me a messag or comment and ill do my best to help you out otherwise…
Der Aschenbecher in der Mittelkonsole des BMW E32 (und vermutlich auch viele weitere) ist mit Hilfe von zwei sog. Klemmmutteren, die innen in der Konsole auf zwei Kunststofflaschen stecken, verschraubt. Wenn der Aschenbecher allzu beherzt…
I needed a back plate to mount my Icom IC-2730a to a Lido AMPs mount. The stock brackets seem exorbitantly high priced for what they are, so I decided to make my own. Just pay attention that the Lido mount is asymmetric, note the way the…
Best grippy/slidey compromise I could find for these two headsets. This is my first design. I'd print four clips for each headset, two for each side. The two old LG headset models are slightly different sizes, and came with worthless…
made for motors with 19mm hole spacing (see pic) print with TPU
Zoe Phase 2 (from 2019 on) holder for ICOM IC-2730 print in PETG.
Just a very basic sturdy VESA mount for the Startech ST7300U3M USB hub in 70mm and 100mm sizes. I recommend at least 5% infill and print with the countersinks for the screws facing upward. Uses standard M3 pan head screws for the hub…
Bei diesem Model handelt es sich transparente Einlagen für den Aschenbecher eines BMW E32. Im Orginal sind diese Einlagen aus transparentem, roten Kunststoff und auf der Oberseite des Aschenbecher-Gehäuses eingebracht. Durch die…
Nohy ke klávesnici Genius Twin Touch 730e Legs
I bought a second-hand Canon SX730 with good discount because the battery lid had been broken off and missing. I fixed it with my Prusa and I'm sharing the model in case anyone has the same issue.
This mount should fit 2002-2007 classic Chevy trucks in the center console between the two power outputs. You will need to drill a single hole in the back for the wire to pass through and I used VHB tape to stick it down to the bottom.
A mount for attaching a 1730 hotend (plus a dc42 IR sensor) to a RobotDigg delta effector . It's meant to be used together with my Nimble mount . Category: 3D Printer Parts
I recently purchased a pre-assembled Geiger counter kit from Electronics Goldmine and noticed that they didn't have an option for a housing for it. So I thought it would be a fun Tinkercad project. This is a simple rectangular box with a…
This is an adapter to allow a Rand McNally RVND 7730 LM RV GPS to mount to a Rand McNally RVND 7720 LM RV GPS dash mounting plate in my 2015 Winnebago Brave 31C. Print Settings Printer Brand: Prusa Printer: i3 MK2S Filament: E3D…
🧩 The model I made this model for my Qotom Q730G5 S08 that is hosting my opnsense. The dimensions are the following : 155*127*48mm There is only one model but I did upload the Fusion file with all the steps if you want to remove or add…
Držák páky u pákového kávovaru Hyundai EM 7301. Velmi spolehlivý.
In case your radio doesn't have any feet / stand like mine does, these offer a 10 degree tilt for your radio. Use an M4 x 16mm style bolt to attach to your radio. duplicate and mirror this model to print legs for the other side of the…
Save $16+ and print it yourself Any plastic is good, I used PLA but PETG is probobly a better choice IMPORTANT! Print on its side as in the photo, this is extremely important for load transfer.
Ricambio meccanico ultra-resistente per la testina del decespugliatore (pomello battifilo). Progettato per resistere agli impatti contro pietre e terreni duri durante le sessioni di sfalcio più impegnative. Materiale: Altamente…
Stacking bracket for ICOM IC-7300/IC-9700 transceivers. Wanted to be able to use the tilt foot on the lower radio and a little more space between the units. This bracket (x4) provides the necessary stability and additional air gap. Note…
Fan mount 1:7 scale 7304 should work for the others to as long its 1;7 Scale. Mounting hole in chassi and the fan mount needs to be drilled or if you use any strong duble sides tape should work to
Two separate PCI brackets for the GT 730 graphics card. I needed to split the VGA and HDMI outputs separately into two tiers. It's better to print on the end face for greater strength.
This 3D-printable tackle box storage system is designed to securely hold one Plano 3731 or Plano 3730 tackle box in small boats, jon boats, kayaks, and compact fishing setups that don’t have factory storage. The holder includes multiple…
4 wall loops Tree supports
You can use this adapter to connect the MaxXT Electric Orbital Sander to the Bosch Click & Clean System. Printed in PETG with five perimeters. The adapter is slightly eccentric. Make sure you put it in the correct orientation.
This model is compatible with the lego system.
Držák páky u pákového kávovaru Hyundai EM 7301. Velmi spolehlivý.
I run a home server and it's a custom build, and my H730 controller was running at 53° C year round. Designed and printed this 40mm fan bracket and used a Noctua fan, and it now runs at 39-40° C year round. There were heat sink variations…
