Liczymy pasujące modele…
Remix of earlier designed privacy cover. Improvements is that the base/holder fits better on the camera, and the amount of material required is lessened.
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Description Tightening the nuts on your Logitech G27, G29, G920, or G923 steering wheel doesn’t have to feel like an arm-wrestling match with a gorilla. This wrench, based on the original design by magno23 (thanks for the initial work!),…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Print Settings 0.4mm 20% infill Support - Touching Build Plate Scale to 10% design is 10:1 to allow for detail. Can be printed with support and face down for quick/draft prints in under 1h, or with support face up for higher quality…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
1920's Gangster Deadpool
Wydruk około 7,78 €–9,51 € nettoWstępna wycena jednego wariantu
A tightening/loosening grip, for when the integrated clamp is tightened to much or to little on the Logitech G29/G920.
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
💬 Summary A set of rear wall spacers designed for Logitech G920 racing pedals . These structural bumpers create a necessary gap between the pedal unit and the wall, ensuring that the connection cables are not crushed, bent, or damaged and…
Wydruk około 1,20 €–1,46 € nettoWstępna wycena jednego wariantu
Compact camera mount with screw for UNC 1/4". This fits all cameras with UNC 1/4" thread like Logitech C920, Lenovo 500 FHD or similar. Dimensions holder: Width 155.12 mm height 65,00 mm Depth 51,66 mm Dimensions screw: Diameter 25.00 mm…
Wydruk około 2,95 €–3,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I lost a pin on my 2003 Kawasaki Prairie 650 and didn't wat to pay for a new one. So I designed and printed this. Its not perfect dimensionally to the OEM but it functions just like it. I printed PETG at .15 layer height with a 0.40…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
Flip before printing. No supports required. I used wood screws 4.2x14 to mount the steering wheel. Update 06.04.2025: - added f3d project Category: Video Games
now on makerworld
Shifter knob mod. Using original screw to mount the adapter, long shaft and locking to prevent breaking and over-tighten. Long version could be sensitive against breaking above the threadline. Short version in use since a few years. Screw…
Modular Phone stand for Logitech wheels G29/G27/G25. I used M5 screw with self locking nuts for assembly. The system is modular and adaptable for any smartphone. I use this with simhub dash. Print instructions Category: Video Games…
Added V.2 models. I find the new design more comfortable. It is a bit lighter beacause it only uses 2 magnets. And the design is better because it should not get loose with time. 3D printed modification that makes your Logitech G29 paddle…
I designed my own webcam mount for my Ender 3 S1 Pro. I wanted the cam drive with the Z-Axis. You can use the holes for different positions and cams. I printed it in black Petg and its worked perferct for me . Hope you enjoy. Today…
To assemble you need a M3x8 Screw and an M3 Insert. Update: new File “topRound” for those who wants to try it out. (request from comments) Disassembly instruction: https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077
you can print it without supports use some 1.75mm filament for the hinges
I really liked Smelliot's version of the 10inch rack mount for Lenovo Tiny PCs, but the m900q's rubber feet are in a different position, so I remixed it and moved the feet channels to fit the m920q/m720q, and perhaps any other tiny's that…
WIP! Let me know how well it works. Logitech G29/G920 Quick Release adaptor using 32mm bike seat clamp, like this one . Files Female adaptor for fitting to the Logitech base Male adaptor for refitting original Logitech wheel Male adaptors…
This is a Remix of this So it now fits a 19" I needed 2 of this mount for a 19" side by side …. i have adapted the mounts from @Mauker, so you can also just print one side and use some of @Mauker Modular Rack Mount for the other side as…
Left X-Axis Friction Fit Mount I put together to mount my Logitech C920 on the Ender 3 S1. You should be able to use any webcam that has a standard 1/4" tripod mounting screw insert. You will need to print out a 1/4" screw to mount your…
You don't own a Logitech Racing Wheel, unless you've at least come across the brake pedal mod at least once. They are known for having a rubber stop that is often removed for a better braking experience. There are other mods such as…
These extra feet make it possible to mount the Logitech G29 / G920 for a better feeling when gaming with a lower chair setting. Assembly Apply double-sided tape to the positions as shown in the picture below. left: top feet, right: bottom…
This model is compatible with the lego system.
It is very hard to print well because of all of the holes. It took my bambu p1s about 5 tries to get it right. It looks great and was very easy to install because of how ITG Gear designed it. I also used his front cover design and it…
Reupload of a popular wheel mod for Logitech G racing wheels. This includes everything you need to print it and get racing. G920 Tutorial - This is the video I used to figure out how to install the wheel. When reassembling, don't install…
Replaces the top cover of a Lenovo Mx20Q/X and provides fan opening for 120 or 140mm fans. It's not a total like for like, so you'll need to bond the front panel to the case as the supplied screw won't be enough to hold the panel on with…
Wheel center hub replacement faceplate with Nissan GT-R logo, fits the Logitech G29/G920 wheel. I've added additional layers to the logo should you wish to include a color change (red recommended). Remove the screws on the original center…
Didn't seem to find a cover for the C920 so made one with inspiration from another user. Recommend using the improved version of the cover which fits better to the camera. Logitech C920 privacy cover improved by siamigo | Download free…
Hello, here you can download a steering knob designed for Logitech G29 / G920. These parts are needed: 1x Hex Head Screw M5x35 1x Allen Screw M5x40 1x Thread insert Ruthex RX-M5x9,5
Fixing overheating issues when installing a GPU with a ventilation side panel on the Lenovo M910s, M920s, M720s, and M71 This project introduces a meticulously designed ventilation side panel built specifically for Lenovo M910s, M920s,…
Print settings: 0.2mm layer height 4+ bottom layers and 5+ top layers 6 perimeters w/ 0.6mm nozzle or 9 perimeters w/ 0.4mm nozzle 10+% infill I used PETG. PLA may work fine, but I was concerned about creep. I have also not tested the…
I wanted a shifter mod that looked good, stiffened up the shifter, and could also be transformed into a sequential shifter. I took a few of the other designs (links below) on thingiverse and molded it into this. I printed it but it needed…
This is a 3D model of the Thinkcentre M920. The 3D model from shuki on GrabCad https://grabcad.com/library/lenovo-2 was used as a reference and significantly modified to fit the M920 better. Fusion and STEP files included so you can…
This is an easy to print camera mount for a Logitech C920 (may work for other camera models that have the same bolt size) so it can be mounted from the front of an Ender 3 Pro. PLEASE READ THE PRINT INSTRUCTIONS (SEE BELOW) The camera…
Mirror in slicer for both sides Made becouse not even epoxi is strong enough Print with supports and min 45% infill
This is a wall mount for the Fujitsu Esprimo Q920 mini PC (USFF). It consists of a base and an optional mirrored top part; the base is working fine without it, but I felt more comfortable also adding the top. Make sure that the vent holes…
This model is compatible with the lego system.
Easy-to-install wall mount for Logitech gaming pedals. Needed to get them up from the floor, to ease access for vacuuming. This is the left part. Mirror to print the right part.
A holder for a Logitech C920/C930E webcam without the heavy base for a Prusa i3 MK3/MK3S X-axis nema 17-motor. Uses the original hinge to keep tilt functionality. Last picture is from the webcam. It requires disassembly of the camera, but…
English: This is a hook for the channel rail of a Thule Omnistor 9200/9300 awning. It features a a bracket for some fairy lights. I use this fairy lights with the hook Camplight:…
This is a pedal extender to move the pedals of Logitech G29/G920/G923 pedal set up 50mm, and cant the angle of the pedal back towards the driver 7 degrees. it adds more precise feel and adjustment through increased travel distance. And i…
Wanted to get rid of the heavy base on the Logitech C920 and mount it to the arm. This adapter is a mash together of the two existing things. (minor disassembly of webcam required) Just a mashup of:…
A simple stand that adds a bit of height. Enough to watch the printer if needed, but easily moved around.
I lost one of the spacer bit for my g920 and decided to model the one I still had in fusion 360. Print settings I used: Layer height: 0.2 10% gyroid infill Brim adhesion
Die Faceplate ist für die montage am g29/920 anstatt der originalen Plate gedacht. Für jeden Audifan also ein muss. schreibt gerne in die Kommentare ob es sonst noch logos gibt die ihr gerne haben wollt ich werde dann mein bestes geben um…
This model is compatible with the lego system.
Wheel center hub replacement faceplate with BMW logo, fits the Logitech G29/G920 wheel. I've added additional layers to the logo should you wish to include a color change (recommended sequence black/white/blue). Remove the screws on the…
After trying different ways to mount my Logitech c920 onto my Ender 3, I decided I wanted a way to mount the camera off the bed or Y axis. I came across @SCHEMENKE's design for an iPhone mount and thought it was a brilliant design. So,…
ENG: Vertical stand for Lenovo USFF Tiny PCs. Works with M700q, M900q, M710q, M900q and presumably oder and newer variants like M720q and so on. As long as the PC is not thicker than 36mm. Made with Tinkercad. GER: Ständer für Lenovo USFF…
I don't have a C270, so I borrowed the measurements for the box part of this one and married them up to a slot mount I designed for the C920. The camera base slides in with no modification now and chills comfortably with the nozzle right…
I enjoyed this mount but wanted the camera a little further from the print bed. I elongated the arm by 60mm and then also lengthened the mount point so it can accommodate a thumb screw such as this After using this for a while I found…
Fits on a Creality Ender 3 V2 Neo, and older models with similar Y axis design. I initially tried corner mounts that go between the bed and the springs underneath, but it kept ruining the bed leveling since it's very easy to bump into and…
Since the case of the Logitech c920 was for my Trident and the Stealthburner hit the top front when mounted, I created a slim case inspired by this model:…
Die Faceplate ist für die montage am g29/920 anstatt der originalen Plate gedacht. Für jeden Audifan also ein muss. schreibt gerne in die Kommentare ob es sonst noch logos gibt die ihr gerne haben wollt ich werde dann mein bestes geben um…
This model is compatible with the lego system.
Die Faceplate ist für die montage am g29/920 anstatt der originalen Plate gedacht. schreibt gerne in die Kommentare ob es sonst noch logos gibt die ihr gerne haben wollt ich werde dann mein bestes geben um dies umzusetzen. :-) Kein Spacer…
These buttons are designed for the Logitech G29 but are also compatible with the G920 sim racing steering wheel. They feature a press-fit design that’s easy to install yet simple to remove if needed. Additionally, they can be securely…
The tab on the bottom of my Logitech C920 webcam is longer than the bezel of my Dell S2721QS LCD. I made this spacer so that the webcam doesn't overlap the screen area. Print Settings Printer Brand: Monoprice Printer: Mini Delta Rafts: No…
>>>Newer Altered Version Available<<< I am using Sunlu PLA+ and had to reprint the slider multiple times after just a few days. I modified the slider for increased durability and smoother movement, and I remixed the top plate for added…
Remix of the ‘Larger slide cover’ by RasmusB, which is based on https://www.printables.com/model/411917-logitech-c922-webcam-cover-slide-to by codysechelski Remix differences from RasmusB's version Removed the gap between the body/button…
You will need to remove the main/heavy C920 swivel mount. This mount then replaces that maintaining the swivel but being easier to mount to an extrusion frame with M3 screws/nuts. To use a C920 you will probably need to open the webcam to…
Screw used for mounting Logitech C920 ¼ inch. I've used it for my Ender 3 v2 Neo Webcam mount from thingyverse. https://www.thingiverse.com/thing:5843656
This bracket is designed to allow quick and easy install to hold your C920 webcam securely to your printer frame. The first .stl works well with an acrylic topped printer as it has a step in the base to accommodate the thickness of the…
Eine einfache Halterung für die Logitech C920 Webcam am rechten Z-Motor des Prusa i3 MK3S. Zum Anschrauben an den Motor können die Originalschrauben verwendet werden. Die Schraube mit der die Webcam von unten an den Halter geschraubt…
Snap on extensions for using larger wheels.
This is a preload spacer for the Logitech G920, G29, G27, & G25 pedals. May work for others too? Let me know if so and I'll update the descriptions. I included the dimensions so you can figure it out yourself or remake it however you…
A new Remix of this nice mount https://www.printables.com/model/1040412-lenovo-thinkcentre-tiny-m720qm715qm920q-10-rack-mo They can now be assembled in the back too for more strength/support. The screw and hex connector's is adapted from…
A simple knob replacement for the Philips HD9200 Airfryer. Designed to fit the timer knob, but I think it would also fit the temperature knob. I used a sharpie to put marks at the 10-minute intervals. With the knob installed, the 0-minute…
The Final Shifter Mod… Modular sequential shifter mod for Logitech G Shifter (G29 G920 G923) and H-Pattern stiffness improvement. Only 4 M3 x 16 screws + Nuts needed. I moved the slider on top of the shifter mod to make it more versatile…
This is a remix of https://www.thingiverse.com/thing:3646996 I have modified it to use a 40x20mm fan, instead of the 40x10 fan from the original. Tested with a Noctua NF-A4x20 FLX fan. For best results, print on it's side with…
Fujitsu Futro S920 is often sell with a 2/4GB mSATA SSD. For many usage it's not enough. To avoid spending too much money on a new mSATA SSD, I designed a 2,5" drive holder to be able to reuse an old SSD that I already had. How to install…
As the monitor bezel is to thin for the c920 i designed a spacer which raises the webcam. Probably useable for many Dell monitors and other webcams. Created with Solidworks Printquality doesn't really matter, as the part is almost not…
I designed this front plate to house my Synology DS 920+ at the bottom of my RackMate T1. Included Keystone and non-Keystone versions. After a few failed prototypes (RIP my filament), I finally got the measurements right. The DS920 is…
Print with lots of walls at high quality
Baffle for dual port 2.5GBit NIC for Lenovo M920q/M720q, in principle should work for other Lenovo-tiny series PC. Here is a link to the file created in onshape:…
Logitech Paddle Shifter Adjustable Extenders These clip-on paddle shifter extenders offset the stock paddle shifter to better fit aftermarket wheel adaptations. These are designed to fit perfectly with my other hot swap wheel connector…
This is custom, modular design that allows you to stack Lenovo M920 machines
Hi, just got some used lenovo m920q (should work for a lot of tinys with the same form factor). It has a offset ~ 32mm cause my task has pipes and metal with 30mm under the desk. So cables and connectors are not blocked. this is version…
Just a relatively easy to print, F1-style wheel. You can assemble the parts with just glue/epoxy. Alternatively, if you want the ability to change handles more easily, you can use 4x M3 x 14 screws and 4x M3 nuts. This design was tested…
I was looking for a camera mount for my elegoo neptune 4 but all mounts are overcomplicated, require additional M screws or even taking apart the camera. My version: simply clips on the aluminum rail tight without screws or taking apart…
2025-10-16 If you don't have (or like or use) heatset inserts, there is a version that will take an M3 x 10mm screw that does NOT need the insert. ------------------------------------ This is a camera mount for the Anycubic Kobra 3. I…
I loved the original design, but, it didn't support the camera angles needed to be useful on my Voron Trident printer. This was a very quick and crude STL edit and it worked out absolutely perfect. The cantilever does require supports but…
Updated geometry to fit with a different graphics card. Inner mounting holes needed slight adjustment. I also shrinked the hole for the standoff screw just a tiny bit so you can use a heat press insert (M3). I also added a simple cover…
Very snug fit HDD bracket for Fujitsu Futro S920. Fixed with 2xM3 screws to the Futro. Vertical printed without any supports (as in the 3mf file) 2,5" HDD with 9,5mm height fits inside. HDD can be fixed with 2xM3 screws too.
When completely ‘folded up', the Logitech C920 has a 3mm gap that the camera can hang on. I took that and focused on a strong, light mount that didn’t require any hardware changes to the E3S1 Pro printer. The uploaded file slips on the…
This is ball mount joint for a Logitech C920 camera that allows it to directly attach to the ball nut from the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2. This allows you to remove the standard mount from the C920 and…
A new Remix of this nice mount https://www.printables.com/model/1040412-lenovo-thinkcentre-tiny-m720qm715qm920q-10-rack-mo They can now be assembled with more screws and hex nuts. + 2x keystone Print face down. Walls - 4 infill - 30 ore…
print at 0.2 layers or better
Shift Knob Threaded Adapter for Logitech Shifters Ever wanted to put an actual shift knob on in place of the Logitech foe leather knob? Do it! Install ; Remove logitech foe leather shift ball by popping off center cap. Unscrew standard…
Should bolt on the wheel perfectly with the bolts already on the original cap.
I recommend printing this in PETG (or at least not PLA) to avoid drooping after a while. Is designed to slot into the aluminum extrusion frame used by many common printers.
Camera Arm for Logitech C920 for Prusa i3 Mk3s You will need 1/4" Bolt and nuts. The one I used was 3/4inch in length. This is the same ones you use for cameras. You can get away with any other bolt similar size. Print instructions Please…
Requires six 6x2mm magnets Refer to https://www.ifixit.com/Guide/Logitech+C920+Webcam+Disassembly/115077 to disassemble webcam to replace with mount In order to guide the USB cable from the top down you will need to disassemble the frame…
Logitech C920 camera mount for Prusa MK2 to MK3 (This is what I use it for) The third picture shows the resulting view in via OctoPrint Camera disassembly Guide Notes Be careful inserting the camera hinges into the printed part, the print…
replacement panel clip for interior door panel behind mirror. Toyota Tacoma
Bracket for the back plane of a M720q/M920q Lenovo ThinkCentre mini PC that has a NVIDIA T1000 graphics card fitted to it.
DO NOT TRY TO PRINT THIS WITH PLA SINCE IT WILL MELT!! If you have ABS at your disposal: use that. Otherwise PETG will do for prints below 80°C bed temp. This remix adjusts the form to fit the angular Y-Carriage on the MK3S, adjusts…
Made for the Logitech G-series wheels to change the angle to 18 degrees for a more F1-like feel. !!! MAX 35mm thickness of table/desk !!! Two of each. Put them in place with double-sided tape for easy use. 0.2 No Supports 50% Infill
This is a camera mount model using remixed/designed links from Sneaks' popular articulating camera mount for a Rpi camera. I'm using a Logitech C922, but I'm sure other similar C9xx models will fit. This was mostly born because I didn't…
![C920 CAMERA MOUNT [MK2 - MK3SMMU2]](https://media.printables.com/media/prints/38920/images/384853_14711b86-9208-4af7-9c58-8bfe86fe61f4/img_5911.jpg)
