Liczymy pasujące modele…
This design of a M6 nut tries to follow the standards of ISO4032 and DIN934 as closely as possible. The thread is designed to fit to a M6 screw with exactly the same mechanical play as a metal M6 nut (when printed in PETG on a Prusa i3…
Collection of metric nuts including : M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20, M22, M24, M30. For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…
Video demonstrating the touch controls / adjusting brightness https://www.youtube.com/watch?v=x7zqOPEqBCw This project is for the 2.8" ili9341 TFT LCD and Touchscreen . The ESPHome code for this project, which is a clock showing inside…
A thread is inserted into the handle during printing by inserting a DIN 934 nut. Depending on the size and the layer thickness set, a corresponding pause must be added in the slicer directly before the layer over the nut . In Bambu Studio…
A thread is inserted into the handle during printing by inserting a DIN 934 nut. Depending on the size and the layer thickness set, a corresponding pause must be added in the slicer directly before the layer over the nut . In Bambu Studio…
Gehäuse für ein ILI9341 TFT 320X240 Display Das Gehäusedeckel wird nur aufgesteckt. Das Display wird unter der Kappe mit 4Stück M3 X max.10mm Schrauben festgehalten. Das Gehäuse bietet genügend Platz um darin einen ECP32 oder D1-Mini etc.…
Compatible with ESPHome and Home Assistant Description This STL model is designed to house a custom display that integrates an ILI9341 screen with an ESP32 microcontroller. It is ideal for users who want to show Home Assistant data or…
You can place the lego minifigure on the stand It’s stable and balanced enough that it won’t fall forward, so you don’t need to worry about it There is a version without the logos so you can download it as well if you want Feel free to…
This model is compatible with the lego system.
A simple snap fit case for a 2.8" ili9341 LCD display opened in the back might not fit all displays, as there are differences among different manufacturers, please check the basic dimensions of your display first.
Housing Display 3.2 inch TFT LCD Display Module ILI9341 320X240 (ESP32 /ESP8266)
V2 - 04/11/21 I haven't printed this new version yet. Updates are: Added slit in the screw poles in the main body to add a nut, so it keeps the lid and body together much tighter without straining the plastic too much. Made walls slightly…
Bezpečnostní očko (pojistka) řemínku / pásku hodinek o šíři 22 mm. Určeno / testováno pro řemínek hodinek Garmin Forerunner 935. Print Settings Rafts: No Supports: No Resolution: 0.15 or 0.2 Infill: 25 - 100 % Filament: FilaFlexible40…
This model is compatible with the lego system.
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x3mm. Collect all the CarSilhouette!
A case with go-pro mounting support I designed for the HiLetgo ILI9341 2.8" SPI TFT LCD Display Touch Panel 240X320 linked below. LINK: https://a.co/d/30J3dXa
lego 4215 59349 23405 98280 30022 87421 47847 6082 64453 65735
Iconic Movie Moments - It Happened One Night - Hitchhiking Competition - 1934
LEGO Chrysler 1934 Airflow
LEGO Peugeot 301 cr 1934 pickup
Es handelt sich hierbei um ein Projekt, welches wohl für einige Elektronik-Bastler interessant sein dürfte, da es individuell angepasst werden kann (f3d-Files). Es folgen noch weitere Einschübe wie z.B. WT32-ETH01, IO-Klemmleiste, LAN872…
“ MG-02” 19"-Rack-Modul 2HE passend auch für die Einschübe “ Modulares Gehäuse MG-01 ” (siehe unten) (B:483.05mm x H:88.15mm x T:244.05mm) (Der graue Streifen ist die sog. “ColorLine” und besteht aus einem eingeklebten farbigen…
Count Carlo Felice Trossi came from the Gaglianico noble family in Biella of northern Italy and was born in 1908. As a motor sportsman and racing driver, he was elected Vice President of Scuderia Ferrari 1931. Gifted at the driving wheel,…
A possible fundament for the Sensitiv Storm Guide (Flower-Windsensor) In order to save matirial (Filament) you can print light version. Fill it with transparent pattex glue Crystel (Henkel). A kind of silikon. The result are nice…
Dvoudveřová varianta - coupe.
A piece of plastic of my Geberit toilet's inner working broke down. Since its an older model this piece is no longer available, even though it is very similar to the piece for model 240.934.00.1
Das dazugehörige Gehäuse MG-01 findet sich hier: https://www.printables.com/model/1144564-modulares-gehause-mg-01-fur-esp32-arduino-raspi-il Das dazugehörige Gehäuse MG-02 findet sich hier:…
Custom plate using SF Sports Night font for team 97934X
Jeden z krásných modelů Praga BABY - varianta kabrio. Dále byla varianta Praga BABY BA coupe.
Needs to be printed vertically standing with supports for the side with hole.
This stand for the (now older) generation of XPS 13 devices is made to fit the device perfectly, by using the outline of the device to get a snug fit. The design is simple and unintrusive to fit into any setup. Ideal for USB-C docking.…
Ebike housing for the ILI9341 2.8" display. The housing is made of several parts. A glass pane of max 1mm (0.5mm is better) should be cut by hand from liquid plexiglass. The frame and plexiglass should be glued to the housing with strong…
This was modified to fit the Brother MFC-9340CDW paper tray where the tabs may break off on the paper end stop. The original design had a larger gap between paper and the stop and didn't fit close enough for my needs. Added 2 different…
Installation Instructions: Back Wheel for Philips FC9353 / FC9349 / FC9332 Remove the Broken Wheel: Use a flathead screwdriver to gently pry off the damaged or worn-out wheel from the axle. Clean the Axle: Remove any dust, debris, or…
This is a display stand for the Italian Beretta M1934. Produced from 1934-1991 this pistol was a work horse of the Italian army and police. Now many are collector pieces, and deserve to be displayed as such. This model elegantly displays…
I had a heavily used printer tray and the area above the handle started to break. Created this model after attempts to super glue failed to keep it together. Back part is used for drilling guide. There are 2 models Back which is 94mm…
Jeden z krásných modelů Praga BABY - varianta kabrio. Dále byla varianta Praga BABY BA coupe.
A pencil/pen vase to keep your favorite pens and pencils, or anything else, in. It is 110mm tall and 85mm for the x and y axis. The photo shows the vase printed in vase/spiralize mode with 1 wall and 3 bottom layers. The stl file is…
This is a display stand for the Italian Beretta M1934. Produced from 1934-1991 this pistol was a work horse of the Italian army and police. Now many are collector pieces, and deserve to be displayed as such. This model elegantly displays…
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x3mm. Collect all the CarSilhouette!
(WARNING NEEDS TO BE EDITED, DOESNT FIT LEGO GOOD) 5 by 6 by 1 Building Brick compatible with well known pre existing building brick designs. Sorry about bad photo, didnt feel like rendering it, and didnt print it yet since im doing a…
As part of my upgrade of my old Anycubic i3 Mega Pro to Klipper, I designed this bracket to affix a 3.2" ili9341 tft touchscreen in place of where the original LCD is located. I like having some of the basic controls right on the printer…
Verbessertes Gehäuse für ein ILI9341 TFT 320X240 Display (Remix von https://www.thingiverse.com/thing:6918515 ) Das Gehäusedeckel wird nur aufgesteckt. Das Display wird unter der Kappe mit 4Stück M3 X max.10mm Schrauben festgehalten. Das…
Replacement foot for a late 90's Celestar Deluxe tripod 93499. It will need heavier infill than the typical print as this is load bearing.
I reversed engineered the broken pieces and this is the result.
This is a remix, made with the intent to control CNC machines through Mach4 software via TCP modbus or bluetooth. Remixed from: https://www.thingiverse.com/thing:4539827 The full software and electronics guide can be found here:…
The original model was great! However, I did not have DIN 562 nuts; I have A LOT of DIN 934 nuts instead. Therefore, I modified the Top, Bottom, and FrontBack connectors to accommodate DIN 934 M3 nuts. The nut openings are now 3 x 5.7 mm,…
I got tired of these tools rolling around and getting out of order, so I designed a simple tool holder to keep them organized. Note that there may be many variations of these tools, and this holder is dimensioned only for SKU 93424. YMMV…
A pencil/pen vase to keep your favorite pens and pencils, or anything else, in. It is 110mm tall and 85mm for the x and y axis. The photo shows the vase printed in vase/spiralize mode with 1 wall and 3 bottom layers. The stl file is…
A pencil/pen vase to keep your favorite pens and pencils, or anything else, in. It is 110mm tall and 84mm for the x and y axis. The photo shows the vase printed in vase/spiralize mode with 1 wall and 3 bottom layers. The stl file is…
Tarzan and his Mate - Johnny Weissmuller and Maureen O' Sullivan - 1934 3D printable model.
Tarzan and his Mate - Johnny Weissmuller and Maureen O' Sullivan - 1934 3D printable model.
Enclosure for a 2.2" SPI TFT ILI9341 and an ESP32. Customized to add a "bottom" to complete the enclosure, it has space for an ESP32. Used hotglue to fixate the boards.
This model is compatible with the lego system.
