P
PrintablesBambu Lover
Tiny Airplane — 2g, 10 Min
Got 10 minutes and 2g of filament? That's all you need for this cute little glider. A perfect print for testing a new sl
- Pobrania
- 8523
- Polubienia
- 708
- Ocena
- 4,48
Wyniki wyszukiwania: airplan
Liczymy pasujące modele…
P
PrintablesSquidgyPlastic
Adjustable Airplane Phone Holder
I do a reasonable amount of flying for work and it has always been a pain holding or propping up my phone so I can watch movies. I tried some low-tech methods over the years but this design is my current solution. I got inspiration for…
- Pobrania
- 6112
- Polubienia
- 1644
- Ocena
- 4,59
P
PrintablesNeues Fliegen e.V.
HAWk Modular RC Wing Airplane
Introduction “HAWk” is a flying wing concept designed for RC hobbyists that feels just as good to fly as an RC plane made from conventional materials. It’s printed in light weight PLA (LW-PLA) with most pieces in vase mode for maximum…
- Pobrania
- 3966
- Polubienia
- 678
- Ocena
- 5
P
PrintablesKunzite
Airplane & Travel Phone Holder
Check the new redesign: Phone Holder V2 which features an even more compact design and no magnets required! (It does have stricter tolerance than this version tho, so keep that in mind) Description This phone holder is perfect for holding…
- Pobrania
- 3161
- Polubienia
- 393
- Ocena
- 4,83
P
PrintablesWilko_SLO
Rubber Band Eagle Airplane
Print with PETG and take different color for the Fuselage. Use kitchen elastics for Slingshot. Build instructions: First put Wings in the Fuselage Then, Input 2x m8 nut into Eagles eyes (its purpose of weight) and build parts together. It…
- Pobrania
- 3126
- Polubienia
- 382
- Ocena
- 4,4
P
PrintablesPALIprints3D
One-piece Paper Airplane Launcher
***IMPPORTED FROM THINGVERSE*** During the season the Mark Rober’s World’s Smallest Nerf Gun video came out and we wondered if a similar process could be applied to a paper airplane? ( https://youtu.be/9c2NqlUWZfo?si=hDiZxToKSbAoWZpr ).…
- Pobrania
- 2785
- Polubienia
- 833
- Ocena
- 4
P
PrintablesTrzaX
Airplane wind spinner
Airplane with rotating propeller. For durability I recommend to print it from PETG or more durable materials, at least the propeller. All parts should be glued together. Cockpit framing is optional and only decorative. I've made three…
- Pobrania
- 2458
- Polubienia
- 989
- Ocena
- 4,83
P
PrintablesYorchmur
Airplane
An airplane I made in 2006. It is not supposed to be based in any existing plain, just a generic plane y imagined. Print instructions Category: 3D Printing Summary An airplane I made in 2006. It is not supposed to be based in any existing…
- Pobrania
- 2283
- Polubienia
- 53
- Ocena
- 4,67
P
PrintablesBP3D
TERROR-DACTYL Glider with Fossil Launcher (Airplane)
This model flies really well and looks really cool! Please let the print cool down fully before carefully removing the glider as to not unevenly bend the wings. For better gliding bend the wings and tail wings slightly so there is about a…
- Pobrania
- 2220
- Polubienia
- 248
- Ocena
- 5
P
PrintablesRCMakerLab
Folding Landing Gear for RC Airplane
It works with 9gr micro servo. A single servo or two separate servos can be used. Material: PLA Print setting: 3 walls and full filling 2.5mm steel rod can be used for struts. 4 pieces of M2.2 or 2.3 (Length 6-9mm) screws are required.…
- Pobrania
- 2006
- Polubienia
- 149
- Ocena
- 5
P
PrintablesSHARK AERO
RC model of Shark airplane scale 1:8 v5.0
PLEASE USE GCODE FILES ATTACHED IN OTHER FILES SECTION G-codes.zip G-codes were generated using Cura 3.1.0 slicer and tested for Original Prusa MK2S printer, but we also achieved comparable results with a cheap Chinese printers Infitary…
- Pobrania
- 1927
- Polubienia
- 224
- Ocena
- 4,5
P
Printablesmrmila
Airplane toy
Model letadla, jako hračka. Cca 20cm rozpětí.
- Pobrania
- 1925
- Polubienia
- 109
- Ocena
- 4,9
P
PrintablesLocalFiend
Northern Pike RC Airplane
Intermediate Level Forward Swept Wing RC Aircraft. Designed for PETG - will also print with PLA. Multi-Part Print, 700g of filament. Very Gentle stall characteristics, high stability, large speed envelope, and top speed with recommended…
- Pobrania
- 1780
- Polubienia
- 345
- Ocena
- 5
P
PrintablesBFree_42
Propeller for RC Airplane (with Prop Saver)
Introduction When first learning to fly RC airplanes, it's hard to overstate the importance of a steady supply of spare parts. Flying is quite easy; it is landing that's hard.* The Ares Gamma 370 was not my first RC plane, but it was my…
- Pobrania
- 1665
- Polubienia
- 116
- Ocena
- 5
P
Printablestrendspoke
Airplane Device Holder
A small tablet holder to hook to an airplane table. Holding together by magnets The middle holder isn't really necessary, just made it to hold 2 devices a bit overlapping in the middle.
- Pobrania
- 1638
- Polubienia
- 216
- Ocena
- 4,96
P
PrintablesSouky1122
Airplane Kit Card
Kit card with a small biplane. easy to assemble, beautiful to decorate
- Pobrania
- 1386
- Polubienia
- 221
- Ocena
- 4,91
P
PrintablesJulius3E8
Kit Card Beechcraft Musketeer B23 airplane
In homage to my old Beech Musketeer, I made this fun little toy you get to assemble yourself. May you have a CSVU day! This one prints without supports in your resin printer. If you found this useful, it would bring me great joy to see…
- Pobrania
- 1385
- Polubienia
- 226
- Ocena
- 4,67
P
PrintablesJhuttula
Airplane Toy
Flexi-wing airplane model with flapping wings and spinning propeller when the button is pushed. Model size: 180mm wingspan, 130mm nose to tail, 50mm tall. All parts need to be printed at 0.15mm layer height with 0.4mm nozzle or better to…
- Pobrania
- 1135
- Polubienia
- 242
- Ocena
- 5
P
PrintablesDirac Arts
glider Airplane with Slingshot
Este modelo é dividido em duas partes com pinos separados para não precisar de suporte
- Pobrania
- 1060
- Polubienia
- 147
- Ocena
- 1
P
Printablesmanmac
Airplane phone holder
Thight fit with very thin case (0.7mm) like Filono carbon. You can print only the first couple of layers to check if it fits your phone. Easy to hang in the seat in front of you. Printed with 0.4 noozle at 0.3mm hight or lower depending…
- Pobrania
- 1001
- Polubienia
- 137
- Ocena
- 4,82
P
PrintablesJame
Hand-thrown propeller airplane
For ease of use and playability, I prefer children to have a hand-thrown airplane. However, the available options for this type of airplane are almost the same. Making a hand-thrown airplane with balsa wood and film is very cumbersome.…
- Pobrania
- 968
- Polubienia
- 134
- Ocena
- 5
P
PrintablesEJTH
Improved Rubber Band Airplane
A fully 3D printed rubberband plane. Print parts and plane body and assemble. No tools needed, but threading a piece of string or wire through the body and pulling the rubber band through makes it all a lot easier. Build Instructions take…
- Pobrania
- 967
- Polubienia
- 128
- Ocena
- 5
P
PrintablesJosé Pedro
Airplane Models Low Poly Collection V1
This airplane models collection includes a curated selection of both classic and modern aircraft designs, perfect for hobbyists, collectors, and aviation enthusiasts. Each model has been created with smooth surfaces, accurate proportions,…
- Pobrania
- 958
- Polubienia
- 112
- Ocena
- 5
P
PrintablesCody
AIRBUS A320 Airplane Pop Flat Card
AIRBUS A320 Airplane Pop Flat Card
- Pobrania
- 930
- Polubienia
- 149
- Ocena
- 4
P
PrintablesTriple G Workshop
Folding Airplane Phone Stand PIP
I just wanted to slim this awesome model down so I cut just about ⅓ of the material off in such a way that requires NO SUPPORTS . Use brims because I chopped off a lot of material. *Simulated until I take my next flight:
- Pobrania
- 905
- Polubienia
- 162
- Ocena
- 4,85
P
PrintablesSouky1122
Airplane Kit Card - Cessna
kit card of the Cessna 180 aircraft model for decoration. suitable as a gift for your husband, children. easy to assemble and beautiful for decoration. composing is fun assembly guide:
- Pobrania
- 902
- Polubienia
- 112
- Ocena
- 5
P
PrintablesJakob G.
RC control horn/ rudder horn for model airplanes (NO SUPPORT!)
Print with 0.12 mm Layer Height No support needed You may need to add a brim to prevent the objects from falling over The zip-lock mechanism is working, but glue is recommended anyway. Have fun! …check out my other RC-related models on my…
- Pobrania
- 879
- Polubienia
- 73
- Ocena
- 4,75
P
PrintablesCobalt3D
Minimal B2 Spirit Airplane Magnet
Magnet based on the US Air Force B2 Spirit airplane. Minimal model. Uses 6mm x 3mm magnets. G-Code has a layer pause at 3.8mm to drop in magnets.
- Pobrania
- 875
- Polubienia
- 78
- Ocena
- 4,75
P
PrintablesStéphane RATELET
Airplane instruments clocks - MMU
Here is a remix of the altimeter desk clock, including a tilted version, or with magnets, and also extra faces/needles (Airspeed and Heading indicator), with MMU compatibility if you have it (use faces with “MMU Only” and split them to…
- Pobrania
- 868
- Polubienia
- 301
- Ocena
- 5
P
PrintablesDennis
wall art airplane F22 Raptor (large)
F22 Raptor with a wingspan of 70cm There is also a single part print to scale to the size you want
- Pobrania
- 842
- Polubienia
- 140
- Ocena
- 5
P
PrintablesHeber
Free Flight Airplane
I have been flying RC models and printing airplane models for years. Designing a flying machine can be tricky. Should I enroll in a proper fluid mechanics? Not yet, I took the challenge to retrofit an existing balsa wood airplane model as…
- Pobrania
- 817
- Polubienia
- 168
- Ocena
- 0
P
PrintablesVictor
Garden Airplane wind catcher/windmill
Little fun win catcher, modeled as an airplane There is models for single colour and multicolor with different hole sizes(7-14mm) in the bottom for attaching it to something like a fence post Settings Main body requires support under the…
- Pobrania
- 780
- Polubienia
- 221
- Ocena
- 4,6
P
PrintablesTejan
P-51D Mustang Airplane | 1-100 Scale
Arguably the most iconic American fighter of WWII t he North American Aviation P-51 Mustang is an American long-range, single-seat fighter and fighter-bomber used during World War II and the Korean War , among other conflicts. Did You…
- Pobrania
- 766
- Polubienia
- 51
- Ocena
- 5
P
PrintablesPH
Airplane Seatback Device Holder
Should be a very easy print. No supports needed. PLA is fine but PETG or ASA for better durability is good.
- Pobrania
- 742
- Polubienia
- 86
- Ocena
- 5
P
Printablesbecki05
Slingshot for airplanes
This is a slingshot for small planes, like the great planes from robotfriend https://www.printables.com/de/model/456057-f23-ultralight-glider-print-in-place…
- Pobrania
- 739
- Polubienia
- 68
- Ocena
- 4,67
P
PrintablesTrafton
![VELORA 3D PRINTED RC AIRPLANE WING [TEST PIECE]](https://media.printables.com/media/prints/768011/images/5979348_a352c031-c3ea-4c4a-9265-edc84a2e2fe8_d49f1449-a16b-452b-8894-2d3c9acbeb53/screen-shot-2024-02-16-at-51843-pm.png)
VELORA 3D PRINTED RC AIRPLANE WING [TEST PIECE]
FINAL VERSION LINK Link to build plate adhesive that I use for reliable printing: TERRABIND X50 PLEASE LEAVE A COMMENT IF YOU HAVE A QUESTION OR IDEA FOR IMPROVEMENT. Video of Velora flying NOTES CG is marked on bottom of plane with an…
- Pobrania
- 729
- Polubienia
- 91
- Ocena
- 0
P
PrintablesClaytonM223
RC Airplane wall hanger
Model airplane hanger that holds the aircraft by its wheels. Fits any wheels up to 110mm in diameter. I used drywall anchors to hold it to the wall. I have had it up for a little over 3 years now and I haven't seen any trouble with it…
- Pobrania
- 727
- Polubienia
- 55
- Ocena
- 5
P
PrintablesCatja
Kit Card Airplane stand
Just my take on a solution for displaying kit card aircraft on a slightly angled stand, with a distinct swoop but high stability. It's not a universal solution, but should hopefully fit many models. The stand comes as a kit card itself,…
- Pobrania
- 726
- Polubienia
- 258
- Ocena
- 5
P
PrintablesStu142
Airplane Phone Holder
If you get value from my work, consider supporting me at stu142.com/supportme Airlpane phone holder that also works with different devices. Clips onto the tray or sits on top of the tray. Consisted of two slim pieces instead of a thick…
- Pobrania
- 703
- Polubienia
- 87
- Ocena
- 4,9
P
PrintablesMr Disintegrator
RC Airplane Control Horns
Three different styles of R/C control horns for your homebrew foamy R/C planes. Designed for printing in PETG or ABS at 100% infill for optimal strength. Flat horns are designed to be pushed through a slot cut in foam. Big horns need…
- Pobrania
- 700
- Polubienia
- 70
- Ocena
- 5
P
PrintablesLopata_255
Micro Airplane Toy
Summary This a micro airplane quickly and easily printed, perfect to give to children during a Maker Faire! It does not fly, too small and not made for it, this is a toy :-) Print Settings Printer brand: Prusa Printer: i3 MK2S Rafts: No…
- Pobrania
- 685
- Polubienia
- 80
- Ocena
- 4,78
P
PrintablesMichalW
Airplane model stand
Display stand for Airfix 1:72 models. Ball joint allows you to pick the best angle. You may need glue to keep heavy models in place. It can be printed without supports. Category: Models
- Pobrania
- 684
- Polubienia
- 39
- Ocena
- 5
P
Printableskikomle
Glider airplane
A simple glider inpired by a paper airplane. Instructions: Print with low or no infill as it will be to nose heavy if you put infill Use 2 walls Make sure to level your bed properly before starting the print Any remixes are very welcome…
- Pobrania
- 676
- Polubienia
- 42
- Ocena
- 0
P
PrintablesCcope19
Airplane Cookie Cutter
Needed to bring something for my engineering college Christmas party. Wanted to make cookies but didn't have any cutters. That's when I came up with the idea to whip up this airplane cookie cutter for the Aero Club. While 3D printing…
- Pobrania
- 658
- Polubienia
- 114
- Ocena
- 4,71
P
PrintablesQrome
RC Airplane Wheel and Tire
54 mm diameter tire and only 8 grams when fully assembled. This is designed primarily for RC planes but can be used with anything. The tire is TPU printed with 0.8mm walls and 0 (zero) infill so that it is hollow and rubbery. The wheel is…
- Pobrania
- 648
- Polubienia
- 59
- Ocena
- 5
P
PrintablesRobert G Ritzenthaler
Aero Shark RC Airplane
Watch it fly here: Pls sub
- Pobrania
- 644
- Polubienia
- 100
- Ocena
- 0
P
Printablessteamtronics
Print In Place Propeller Airplane
Inspired by a helicopter model. I made a print-in-place airplane for a fun toy.
- Pobrania
- 617
- Polubienia
- 49
- Ocena
- 5
P
PrintablesDamia_nos
AIRPLANE PROPELLER
airplane propeller r80mm h10mm dh5.25mm
- Pobrania
- 614
- Polubienia
- 40
- Ocena
- 3
P
PrintablesJT37
Extra 300 Airplane merged to one part
Updated, no more mesh defects! I merged the single parts of the Extra 300 design by rhinodk into one (except the propeller) using Blender. That way it is printable with support but without the need of glueing the wings, which turned out…
- Pobrania
- 612
- Polubienia
- 34
- Ocena
- 0
P
PrintablesJon Sun
Fighter Jet - Multirole, Interceptor, Military vehicles for tabletop, Fighter airplane, aircraft, jet plane for tabletop, desk, cool model
This is a model fighter jet I designed. This will require supports if you want to print it in one piece, although is still pretty quick to print. It is inspired by many real fighter jets/aircraft but this one is completely original.
- Pobrania
- 601
- Polubienia
- 25
- Ocena
- 0
P
PrintablesASKA Modelle
Weapon box with airplane bomb 1 16 scale for WPL RC Trucks
Dieses Set enthält eine Waffenkiste mit zwei Fliegerbomben aus dem zweiten Weltkrieg. Das Modell hat den Maßstab 1:16 und eignet sich perfekt für 1:16 WPL RC Trucks, oder andere Fahrzeuge im Maßstab 1:16. Die Bomben Modelle sollten mit…
- Pobrania
- 596
- Polubienia
- 87
- Ocena
- 5
P
PrintablesCLERX
Simple stand for Clerx airplane models
Use at least 20% infill. All airplane models are available here: https://www.printables.com/social/70502-clerx/collections/316600
- Pobrania
- 577
- Polubienia
- 89
- Ocena
- 5
P
PrintablesArTpl
Model Airplane Cessna 172
I modeled one of my favorite aircraft, the Cessna 172, for you. I believe it will be a great decorative piece to adorn the desk or home of aviation enthusiasts like myself. Please use your printer’s standard settings when printing. Note:…
- Pobrania
- 565
- Polubienia
- 38
- Ocena
- 5
P
PrintablesAnthonyH
Quad Whistle Bomb for RC Airplanes and Drones
It has 4 whistles that are really loud. It is 69mm tall and diameter is 20mm and fin diameter is 40mm. This is a smaller version of another bomb I made. Be sensible and don't drop over people or property. Print on end standing up. No…
- Pobrania
- 560
- Polubienia
- 33
- Ocena
- 5
P
PrintablesDevmiser
Luggage Tag - Airplane Design
Make your luggage easier to spot with a colorful luggage tag with an airplane logo on both sides. Print it using your favorite color filament. I used 90% infill for strength and supports on the build plate.
- Pobrania
- 557
- Polubienia
- 61
- Ocena
- 4,67
P
PrintablesKunzite
Compact Airplane & Travel Phone Holder v2
Note on tolerances: The model tolerances are very small (0.1mm) in order to make the locking mechanism work. Description This compact phone holder is ideal for travel and during flights. It hooks to the airplane folding tray or can also…
- Pobrania
- 545
- Polubienia
- 54
- Ocena
- 4,88
P
PrintablesDrNucleicAcid
RC Airplane Stand
Please post your makes, I'd love to see how everyone's project turns out! Introduction This is a desk stand for to aid in the construction of model airplanes. I designed this around a few different plans and took the best features from…
- Pobrania
- 544
- Polubienia
- 43
- Ocena
- 5
P
PrintablesX_SHRUBY_X
Turbin for rc airplanes
A little turbo jet engine for model aicrafts or somthing else Print instructions print everything with brim and with prusament petg print with quality 0,15 and 0,4 nozel and 15% infill no Supports
- Pobrania
- 529
- Polubienia
- 56
- Ocena
- 5
P
PrintablesMichael.P
Paper airplane and Card launcher
This model allows you to shoot paper airplanes and cards using only a rubber band, Print the model at 50% if you want to make the most effective card thrower. supports are only needed for the small trigger and the body does not need them,…
- Pobrania
- 507
- Polubienia
- 67
- Ocena
- 5
P
PrintablesCLERX
Customizable stands for Clerx airplane models
Customizable (remixes allowed) versions of the stands that are included with my free models. Both .step and .stl files are included. All airplane models are available here: https://www.printables.com/social/70502-clerx/collections/316600
- Pobrania
- 501
- Polubienia
- 95
- Ocena
- 4,33
P
Printablestgirao
1:72 Hangar for airplane model kit
This model uses very little filament and the result is very interesting (in my opinion) and protects my airplane models from dangerous hands. Additionally, gives a kind of “diorama look” to the models. This model was printed using a 0.8mm…
- Pobrania
- 497
- Polubienia
- 107
- Ocena
- 0
P
PrintablesJon Sun
Flexible Fighter Jet Airplane (F-15)
This is a flexible F-15 Jet I made with HIGH FLEXIBILITY! There are no supports required, and I printed mine at 75% scale with normal PLA (look below for print settings), it printed just fine. I'm not sure if you should print it with…
- Pobrania
- 485
- Polubienia
- 59
- Ocena
- 5
P
PrintablesKrupik_T
Airplane keychain
Hi, I made a new model of a small airplane which can be used as a keychain. Simple without any high demands on your printer. Hope you like it. There are two versions → hole in the front part of the model and the second in the back.
- Pobrania
- 473
- Polubienia
- 28
- Ocena
- 5
P
PrintablesDennis Wallace
Airplane Window Pictureframe
I saw something similar on the Web and thought I could do this my self. So here it is an Airplane Window Picture frame. The Picture size will be 10x15mm (4x6 inch).
- Pobrania
- 464
- Polubienia
- 61
- Ocena
- 4,33
P
PrintablesGage
Cozy MK IV Experimental Airplane IMPROVED!
UPDATE 30 Jan 2026: It was pointed out that the left wing STEP file incorrectly had a flat on the winglet. The individual part files should already be oriented correctly for easy printing. You'll need generous use of supports for the…
- Pobrania
- 440
- Polubienia
- 58
- Ocena
- 5
P
PrintablesTyler Nielsen
Airplane Hanger Miniature
A miniature of an airplane hanger. The main body and each door are provided in separate .3mfs so that they can be connected after printing. The fusion 360 model also has sliding joints for the doors if you want to print them on in any…
- Pobrania
- 431
- Polubienia
- 56
- Ocena
- 0
P
Printablesbigovereasy
Airplane Pencil Cup
My old design that I didn't publish here. I modified it a little for printing. When assembling, use glue. Don't forget to give me a like 🧡 Share photos of your prints 🖼 Clear prop! 🛩
- Pobrania
- 430
- Polubienia
- 151
- Ocena
- 4,75
P
PrintablesEJTH
Rubber Band Powered Airplane (Wings not included)
A simple rubberband airplane body. Make your own wings from foam board or similar material. Experiment with different aerofoil designs and have fun learning how to build a stable and long flying airplane! I made these wings out of some…
- Pobrania
- 427
- Polubienia
- 69
- Ocena
- 0
P
PrintablesChris vK
Ruberband mod for adjustable Airplane holder
just a simple add-on part to improve the fit of the phone.
- Pobrania
- 421
- Polubienia
- 44
- Ocena
- 5
P
PrintablesSevro
"Eagle Beak" airplane
Plane in style of paper airplane with some accents of eagle. It can fly simple by throwing it or launch by handle with rubber. The model flies quite well, if you don't overdo it with the draw force. It has to be print with 100% infill to…
- Pobrania
- 411
- Polubienia
- 76
- Ocena
- 4,75
P
PrintablesJoeSchu
Plastic Paper Airplane
Its a plastic paper airplane. The nose of the plane needs some work I think
- Pobrania
- 405
- Polubienia
- 43
- Ocena
- 5
P
PrintablesAbstractiaDsgn
Doorstop Paper Airplane. Easy print. No supports.
Fun doorstop that resembles a paper airplane wedged under your door. Really simple print that needs no supports as long as you print it wing side down. That will give the nicest finish on the visible side of the wings. I printed in PETG 6…
- Pobrania
- 403
- Polubienia
- 172
- Ocena
- 5
P
Printablesklimoma
airplane window - wall art
airplane window - wall art , easy to print
- Pobrania
- 403
- Polubienia
- 96
- Ocena
- 5
P
PrintablesBurnt Toast
Airplane Sky Banner Business Card Holder
A “flying” airplane business card holder display with spinning propeller! Holds standard business card sizes. Designed from scratch in Fusion 360 Printed in PLA 4mm nozzle 0.2 mm layer height Supports as shown below Print Instructions…
- Pobrania
- 399
- Polubienia
- 179
- Ocena
- 4,75
P
PrintablesJuan Carlos Castelblanco Roca
KIT CARD Airplane
Its an example of a simple kit card.
- Pobrania
- 396
- Polubienia
- 56
- Ocena
- 5
P
PrintablesRyan Hall
Vought F4U Corsair WWII Fighter Airplane
Inspired by Robert's Lego Minifig Sopwith Camel https://www.printables.com/model/365713-lego-minifig-sopwith-camel-style My first design in Fusion 360 and the result of MANY hours of work I present my version of the Vought F4U Corsair…
- Pobrania
- 393
- Polubienia
- 113
- Ocena
- 4,6
P
PrintablesJoe Matusic, MD
Airplane Bathroom Sign
My golden doodle, Jake, loves to chew up toilet paper. Solution: close the bathroom door. Problem: no one knows where the bathroom is. My wife is a flight attendant, thus leading to making a sign similar to the bathroom signs on…
- Pobrania
- 387
- Polubienia
- 48
- Ocena
- 4,75
P
PrintablesGeorge Duma
Airplane glider
This is a boeing 737 without details and the engine. Because im lazy i did not terminate it. So i searched if the boeing 737 can glide. And the answer was yes. (I am just 11 years old) I did not printed it ):
- Pobrania
- 384
- Polubienia
- 31
- Ocena
- 0
P
PrintablesSpike141
AVEX RC - Goblin 700 mm - 3D Printed RC Airplane
Aero VeloX Extreme RC - Goblin 700 🛠 Technical Specifications Wingspan: 700 mm Length: 436 mm Wing Area: 13.37 dm² - 133700 📦 Hardware & Reinforcement Required Main Wing Spar: 6mm x 500mm Rod (1x) Secondary Wing Spar: 6mm x 250mm 1x)…
- Pobrania
- 366
- Polubienia
- 168
- Ocena
- 5
P
PrintablesJangy
Airplane kids toothbrush holder
Airplane kids toothbrush holder Category: Bathroom
- Pobrania
- 356
- Polubienia
- 43
- Ocena
- 4,33
P
PrintablesSQ7700
Mooney M20 J/K Airplane Silhouette Wall Art
The 3D printed Mooney M20 Silhouette Wall Art is a stunning piece of aviation-inspired decor that captures the timeless elegance of the Mooney M20 aircraft. With its unique blend of art and aviation, the 3D printed Mooney M20 Silhouette…
- Pobrania
- 344
- Polubienia
- 44
- Ocena
- 5
P
PrintablesMikeNyh
Airplane Glider
This is a small glider, with angled front wing for lift. Designed for easy printing and construction. Supports will be needed or the fuselage and tail wing.
- Pobrania
- 341
- Polubienia
- 16
- Ocena
- 3,33
P
PrintablesJangy
Simple RC Airplane CG Balancer
Simple RC Airplane Balancer. Help find the CG of any RC airplane. Enlarge for bigger airplanes. Print Settings Printer: Sidewinder X1 Rafts: No Supports: No Resolution: 200 Infill: 20 Category: R/C Vehicles
- Pobrania
- 340
- Polubienia
- 25
- Ocena
- 5
P
PrintablesWakahiru_me
Airplane cookie cutter
Nozzle: 0,4 Supports: NO PLA, PETG small airplane for cookies :)
- Pobrania
- 339
- Polubienia
- 53
- Ocena
- 4
P
Printables3DxUnlimited
AIRPLANE WALL MOUNT AERO SCOUT S 2 76MM TIRE
Storing airplanes can be a stressful trying to find a place to let them chill but why not let that dude hang from the Wall??! My family has been flying planes for over 2000 years, we all got together and figured this out. Well, using this…
- Pobrania
- 330
- Polubienia
- 18
- Ocena
- 4
P
PrintablesRealFakeDoors99
Support-Free Travel Phone Mount for Airplane Tray Table
Update 12/21/2025 - Added an assembly guide! Inspired by SquidgyPlastic's design . I designed this model from scratch, aiming to alleviate a few of the issues I found with their design. This version fits phones with a width of 86.5mm or…
- Pobrania
- 324
- Polubienia
- 47
- Ocena
- 5
P
PrintablesWise_Man
Flapping Airplane (Ornithopter)
“This plane can flap its wings and fly like a bird.” It requires some work, but you enjoy making it. ～Things to prepare other than 3D printer output products～ 3D printed parts ….1SE Plastic straw ….2EA (diameter 4mm, length 130mm) Plastic…
- Pobrania
- 312
- Polubienia
- 123
- Ocena
- 0
P
PrintablesBruno Porto
Stronger hub for RC airplane folding propeller from Eclipson
The original hub had the spars that connect the propeller blades printed with the hub at a position that would not be very strong and then dangerous. I created a hub part that has sparts printed at a better orientation strenghtwise. This…
- Pobrania
- 301
- Polubienia
- 47
- Ocena
- 0
P
Printablesmanmac
iPhone 14 Pro Airplane Holder v2.0
Thight fit with very thin case (0.7mm) like Filono carbon. You can print only the first couple of layers to check if it fits your phone. Easy to hang in the seat in front of you. Resize the X&Y to fit your phone. Resize Z dimension to…
- Pobrania
- 301
- Polubienia
- 33
- Ocena
- 4,75
P
PrintablesRomanscan
Lightweight 3D Printed Flying Paper Airplane-Cura Profile Description
Cura Profile Description – Lightweight 3D Printed Flying Paper Airplane This .curaprofile file is specifically designed for 3D-printed airplane models that mimic the appearance of paper airplanes — and are meant to glide through the air…
- Pobrania
- 298
- Polubienia
- 23
- Ocena
- 0
P
PrintablesParzival
Airplane window wall art
Update: Added a new look to the window. You can find it under v02. Update 2: You have available the view from Barcelona Airport ATC Tower in https://www.printables.com/model/1051628-barcelona-airport-lebl-view-from-the-aircraf-windo Bring…
- Pobrania
- 295
- Polubienia
- 88
- Ocena
- 0
P
Printablesomerk83
3D printed Airplane
This model is customizable. Each wing has 2 slots, and you can choose whether you want a missile, an engine, or nothing. The plane has a stand for the whole assembly.
- Pobrania
- 293
- Polubienia
- 19
- Ocena
- 5
P
PrintablesAdam Hale
RC Airplane Snow Ski
These skis fit on 3mm legs. I used them on my Horizon Hobby Twin Otter with incredibly fun results! They work best on 2-4 inches of fresh snow, or any depth of snow that's been out for a while. There is a built in stopper that holds the…
- Pobrania
- 288
- Polubienia
- 50
- Ocena
- 0
P
PrintablesBrad3DPrints
Paper Airplane line art / home decor
A simple Paper Airplane line art that can be used as home decor. Printed on an Ender 3V2. 0.2 layer height 0.4 nozzle.
- Pobrania
- 285
- Polubienia
- 122
- Ocena
- 4,75
P
Printablesmbrazdil
Simple stand for airplane 1:400
Simple stand for 1:400 scale aircraft, tested on GeminiJets models, specifically Airbus A380 and Airbus A350. PETG, 100% fill.
- Pobrania
- 279
- Polubienia
- 10
- Ocena
- 5