P
PrintablesBoogie
Samsung Galaxy SmartTag 2 bicycle case for bottle mounting holes
Samsung Galaxy SmartTag 2 bicycle case for bottle mounting holes. I recommend 100% infill. Case height: 12 mm
- Pobrania
- 1108
- Polubienia
- 123
- Ocena
- 4,5
Wyniki wyszukiwania: artt
Liczymy pasujące modele…
P
PrintablesBoogie
Samsung Galaxy SmartTag 2 bicycle case for bottle mounting holes
Samsung Galaxy SmartTag 2 bicycle case for bottle mounting holes. I recommend 100% infill. Case height: 12 mm
- Pobrania
- 776
- Polubienia
- 70
- Ocena
- 5
P
PrintablesMatt-G
Samsung Galaxy Smarttag Model
Thanks to User Blueprint Printing I corrected the model to 39.3mm
- Pobrania
- 448
- Polubienia
- 48
- Ocena
- 5
P
Printablescl33
Samsung Smarttag 2 Case
This case prevents the button from being pressed, for example if the smart tag is in a suitcase.
- Pobrania
- 288
- Polubienia
- 31
- Ocena
- 4,67
P
PrintablesKirstin
Lockcard Smarttag 2
Hier ein Cover für den Smarttag 2 von Samsung. Leider habe ich es noch nicht geschafft, dass er von alleine hält, aber zusammen mit dem Gummiband sitzt er wirklich fest. Here is a cover for the Smarttag 2 from Samsung. Unfortunately I…
- Pobrania
- 286
- Polubienia
- 24
- Ocena
- 5
P
PrintablesMava
Samsung Smartthings hub 3 wall holder
Holder to put Samsung smart hub 3 upp on the wall
- Pobrania
- 284
- Polubienia
- 24
- Ocena
- 4,75
P
Printableslamboolars
Samsung smarttag 2 Snap-clip for cat collar
Fillet edges, and way smaller than other clips. This version can be used with smarttags that have their rings removed. (See smarttag breakdown videos) Edit: now tested in real life → cat is reluctant at first (see pictures) but then no…
- Pobrania
- 279
- Polubienia
- 27
- Ocena
- 5
P
Printablescaltoyuno
Bike Bottle Holder Hidden SmartTag2
Bike Bottle holder for plastic bottles with 75mm diameter With a protection to had Samsung SmartTag2 2 Versions of the holder, One with a hole D3mm for M4 screw to close with the cap (2x M4x6) One with a hole for a Threaded Inserts M4 to…
- Pobrania
- 276
- Polubienia
- 51
- Ocena
- 5
P
PrintablesBJKeane3
SmartTag 2 bicycle fork steer tube holder
A mount to place a Samsung SmartTag 2 inside the bottom of you fork steer tube. I made this for my RockShox Lyrik fork that has an ID on the bottom of the steer tube of about 33mm. I printed with 4 wall loops and 100% infill. Its an…
- Pobrania
- 257
- Polubienia
- 31
- Ocena
- 0
P
PrintablesMW
Samsung Galaxy SmartTag2 3D
First draft of the Samsung Galaxy SmartTag2 The primary goal of this model is to serve as a highly accurate 3D representation of the original SmartTag2, rather than being optimized for 3D printing
- Pobrania
- 252
- Polubienia
- 19
- Ocena
- 0
P
PrintablesAndiW
Samsung SmartTag 2 MTB Fork mount
Hidden mount for a Samsung Smart Tag 2 for inside a MTB Fork. A TPU middle part is getting squashed together by the top and bottom plates for a secure fit. The SmartTag is secured with zipties. You will also need 2x M4 nuts and M4 x16mm…
- Pobrania
- 250
- Polubienia
- 46
- Ocena
- 5
P
PrintablesAndiW
Step file / Samsung SmartTag 2
Step file of a Samsung SmartTag2 that you can use to design your own accesories and mounts for it. *I just measured a smarttag and modeled after it. May not be 100% accuate.
- Pobrania
- 198
- Polubienia
- 11
- Ocena
- 0
P
PrintablesReferentiel
Carhartt Logo
For more logos : +100 World famous logos (+DXF) par Referentiel | Téléchargez gratuitement un modèle STL | Printables.com
- Pobrania
- 197
- Polubienia
- 6
- Ocena
- 0
P
PrintablesJellyTitan
SmartThings Hub (gen2) Minimalist Wall Mount
Minimalist wall mount for the Smartthings V2 hub. Printed in white, it's almost imperceptible. You will need to print with supports, for the prongs that snap over the top. The hub is a weird asymmetric rectangular shape, where one end is…
- Pobrania
- 197
- Polubienia
- 14
- Ocena
- 4,2
P
PrintablesChronoT52
Samsung Galaxy S23 Ultra Dock with SmartThings Station Holder
I wanted an upright stand that held the SmartThings wireless charging station that came with my S23 Ultra. It's rough around the edges, and I'm certainly not an experienced 3D modeler, but this will charge even with the SView case on the…
- Pobrania
- 176
- Polubienia
- 19
- Ocena
- 0
P
Printableswisenull
Samsung SmartTag 2 case
20% infill 3 wall loops no supports needed 0.2mm I printed using Bambu P1S (Standard 0.4 nozzle) Elegoo PLA+ outer brim The included .3mf is for Bambu Studio (it complains about the starter gcode - I changed it to purge less filament).
- Pobrania
- 153
- Polubienia
- 15
- Ocena
- 0
P
PrintablesLukas
Samsung Smarttag 2 Bike Case
Story: My brother gifted me a Smarttag 2 for my birthday and I wanted to be able to locate my bike. Therefore I needed to find a way to attach the Smarttag to my bike . I have designed a case that can be attached under a bike seat with…
- Pobrania
- 131
- Polubienia
- 19
- Ocena
- 5
P
PrintablesEnriqueHC
Smarttag2
Case for SmartTag2 (Samsung). Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: No **Resolution:** 0.2mm Infill: 100% **Filament:** General Silk PLA+ Blue Notes: At the end, if you need it, just use a couple…
- Pobrania
- 120
- Polubienia
- 9
- Ocena
- 5
P
PrintableszSaber
Samsung Galaxy SmartTag2 Mount
Needed a mount for a SmartTag that I could attach onto a motorcycle. Holes are sized for M4 screws. There is just enough clearance so you can cut threads into the print as you screw it into your intended location.
- Pobrania
- 116
- Polubienia
- 12
- Ocena
- 0
P
Printablesczmat
SmartTag2 housing for Xiaomi Scooter 4 PRO gen2
Minimalistic “as it could be” mount for Samsung Smart Tag 2 uder Xiaomi Scooter 4 PRO gen2 rear reflector. If your printer does not have tight tolerances, you may use doublesided tape to hold tag down still. It mounts under original…
- Pobrania
- 103
- Polubienia
- 11
- Ocena
- 0
P
Printablesautumninfj
Samsung SmartTag holder for Lectric XP 2.0 ST e-bike
Modification of the original by Locke_Ride here: https://www.thingiverse.com/thing:5145133 The water bottle mounting holes on my Lectric XP 2.0 ST are spaced 68mm apart rather than the standard 64mm. This means that the original holder…
- Pobrania
- 100
- Polubienia
- 10
- Ocena
- 4
P
PrintablesOgama Industries
BUSKER - BLUEY - WALL ARTT
BUSKER - BLUEY - WALL ARTT
- Pobrania
- 99
- Polubienia
- 20
- Ocena
- 0
P
PrintablesGust
Samsung Smarttag 2 Support
Introducing my specially designed universal support for the Samsung SmartTag 2, a must-have accessory for those who want to seamlessly integrate their tracking device into their everyday carry. This SmartTag holder is meticulously crafted…
- Pobrania
- 91
- Polubienia
- 6
- Ocena
- 0
P
PrintablesSzaldobagyi Tomi
Samsung Galaxy SmartTag2 Holder
This Smart Tag holder has been specially designed for E-bikes to make it easier to place the transmitter under the seat and to protect it from the elements even in a muddy, wet environment. The Smart Tag 2 holder also helps to keep our…
- Pobrania
- 90
- Polubienia
- 10
- Ocena
- 0
P
PrintablesHadi
Samsung smartTag case
Printed using PLA at 0.2 layer height with 20% infill, finished in about 30 minutes. if you need to take the SmartTag out of case to replace the battery, just slide a toothpick in-between the case and the tag from the bottom then just use…
- Pobrania
- 89
- Polubienia
- 10
- Ocena
- 5
P
PrintablesDerk
Samsung SmartTag 2 case
Elevate your Samsung SmartTag 2 with our sleek and durable case, designed to protect your tracker while adding a touch of personal flair. Whether it's on your keys, bag, or pet's collar, this case ensures your SmartTag 2 stays secure and…
- Pobrania
- 89
- Polubienia
- 9
- Ocena
- 4,5
P
PrintablesTob3ster97
SmartTag2 Cat Collar Holder
SmartTag2 holder for a cat collar. Needs to be printed in TPU, with a tuned profile.
- Pobrania
- 88
- Polubienia
- 14
- Ocena
- 0
P
Printablesfermit
Samsung SmartTag+ case
A case for mounting Samsung SmartTag+ (or SmartTag) tracker with zip-ties. Example: mount a SmartTag underneath bicycle saddle. The design requires 4x M3 melt-in-inserts and 4x M3 10mm bolts (for battery later replacement). This will not…
- Pobrania
- 87
- Polubienia
- 10
- Ocena
- 5
P
Printablesvaldman
Xiaomi Pro 2 smarttag samsung
mocowanie smarttaga samsunga do hulajnogi Xiaomi Pro2
- Pobrania
- 84
- Polubienia
- 29
- Ocena
- 0
P
PrintablesSnowChrome
Samsung SmartTag 2 holder for Segway Ninebot Max G3
Keep your Samsung SmartTag 2 hidden inside your Max G3 scooter. Fast and easy print that slides into the top of the stem. Just remove the four screws underneath handlebars and slide the print into the hole. The SmartTag should be friction…
- Pobrania
- 82
- Polubienia
- 2
- Ocena
- 0
P
Printablesmathewsamuel
Philips Hue, Lutron Casetta, Smartthings 3 - Hubs Vertical Stand
This is a vertical stand I made to consolidate my Philips Hue Hub, Lutron Casetta Hub, and my Smartthings v3 hub.
- Pobrania
- 80
- Polubienia
- 24
- Ocena
- 0
P
PrintablesFAB1150
adhesive Samsung SmartTag clip
This is a simple SmartTag clip that can be attached with some adhesive to flat surfaces. It has a good hold on the tag, but it's not a tight mount (by design), so avoid attaching it on things with big vibrations! There's two versions, one…
- Pobrania
- 78
- Polubienia
- 10
- Ocena
- 0
P
PrintablesJurgen
Secrid wallet case with a Samsung Galaxy SmartTag 2
I designed this secrid wallet case after I lost my secrid wallet abroad and luckily found it again between the seat of the car. Print this with support as in the picture and I recommend to use PETG. The case fits exactly so it won't come…
- Pobrania
- 77
- Polubienia
- 6
- Ocena
- 0
P
PrintablesTHE TCANT
Screwdriver Rack for Gladiator GeartTrack
Screwdriver holder for Gladiator GearTrack.
- Pobrania
- 77
- Polubienia
- 8
- Ocena
- 5
P
PrintablesSimplifiedLife
Samsung SmartTag 2 Button Cover
I needed a cover for my Samsung SmartTag 2 so it wasn't going to be accidentally pressed when travelling overseas while in a bag. This cover could have a phone number imprinted in it. I also have a little name sticker underneath with…
- Pobrania
- 74
- Polubienia
- 8
- Ocena
- 0
P
PrintablesSquirtle
KVM Table Holder (StartTech)
KVM Holder for the 2 Port Dual DisplayPort USB KVM Switch. You also need 4 screws. Print instructions Category: Computer Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: Yes Infill: 20
- Pobrania
- 74
- Polubienia
- 9
- Ocena
- 5
P
PrintablesbyCx
Ninebot Max G2 Samsung SmartTag 2 holder
Printing is a little bit tricky. I used organic supports like on one of the photos attached. You will need four 4mm metric screws ~22mm long. I shortened 25mm ones. If you keep them at 25mm they will stick inside the stem where wires are…
- Pobrania
- 74
- Polubienia
- 11
- Ocena
- 0
P
PrintablesLaisch
Cat Collar for Galaxy SmartTag2
Cat Collar for holding the Samsung Galxy SmartTag2. The Cat Collar features a safety latch which opens at about 4kg of pull in case of the cat get stuck somewhere. Measuring: Measure the circumference of your cats neck to get the right…
- Pobrania
- 67
- Polubienia
- 6
- Ocena
- 0
P
Printablesv1ncen7
Hidden Samsung SmartTag 2 Bike Mount - Selle Royal Saddle Clip
Keep your bike tracked and protected with this stealthy, integrated holder for the Samsung SmartTag 2. This model is designed to clip perfectly into the Integrated Clip System (ICS) slot found on the back of many Selle Royal saddles. It…
- Pobrania
- 64
- Polubienia
- 15
- Ocena
- 0
P
Printablestaiguy
InMotion V12 Airtag/SmartTrack Mount
This is a no frills mount for attaching an Apple AirTag or Eufy SmartTrack Link tracker to your InMotion V12 handle. The SmartTrack is bigger by a few millimeters and the AirTag is a bit thicker by a few millimeters. That means there's a…
- Pobrania
- 58
- Polubienia
- 6
- Ocena
- 0
P
PrintablesEvan Kruse
Mod of the Ridge Wallet Samsung Galaxy SmartTag Mount
I couldn't find a Ridge Wallet SmartTag Mount, so I made one :)
- Pobrania
- 55
- Polubienia
- 6
- Ocena
- 0
P
PrintablesKern_Knight
Samsung Galaxy SmartTag 2 case
This is a custom-designed case for the Samsung Galaxy SmartTag 2, built for maximum versatility and secure mounting in any environment. Perfect Fit: Designed precisely to hold the Galaxy Tag 2 snugly while allowing full access to its…
- Pobrania
- 51
- Polubienia
- 6
- Ocena
- 0
P
PrintablesPro Star
Lockcard Wallet SmartTage halter
Mit diesem Modell können sie ihr Lockcard Wallet weiterhin mit ihren einstelungen Tragen aber haben vorne noch den SmartTage.
- Pobrania
- 50
- Polubienia
- 6
- Ocena
- 0
P
PrintablesDan
SmartThings Hub (Gen2) Wall Mount - Ports on Bottom by neonpolaris
A remix of the SmartThings Hub (Gen2) Wall Mount - Ports on Bottom by neonpolaris. When I sliced the model in S3D it was two objects and the print would have been very weak structurally. I repaired the model so it is only one piece now.…
- Pobrania
- 49
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDznutz
SmartThings/Aeotec Motion sensor screw wall mount
My double sided tape failed as I had it mounted above an entry door, this cures the problem of vibration. Fits a Smartthings motion sensor and I assume Aeotec of the same kind as they look like the exact same product.
- Pobrania
- 49
- Polubienia
- 6
- Ocena
- 5
P
PrintablesGuillermo Nasi
Samsung SmartTag 2 Dog Collar Case
Like the name says, it's a case for the Samsung SmartTag2 to put it in a dog collar
- Pobrania
- 47
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBrian Zak
Samsung SmartThings Button Cover
I love my smart home setup, but having to tell my Google assistant to turn on or off the lights at 3 am is a little annoying. So I got some of the Samsung SmartThings buttons. They are exactly that, smart buttons to control your smart…
- Pobrania
- 47
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSJB4127
WOOM 4 - Samsung SmartTag holder (without Logo)
NOTE: The model does not contain the Woom™ logo due to possible trademark issues. Use the PrusaSlicer to add your own custom text or logo ;) What is this: The model is a simple clip-on which holds a Samsung SmartTag, hidden from sight.…
- Pobrania
- 47
- Polubienia
- 4
- Ocena
- 5
P
Printableschuandinh
1U 10'' Rack Mount Hue Hub & Smartthings Hub
1U 10'' Rack Mount Hue Hub & Smartthings Hub
- Pobrania
- 46
- Polubienia
- 5
- Ocena
- 0
P
PrintablesEric T
Samsung SmartThings SmartTag Wall Mount
This holder is designed for Samsung SmartThings SmartTag. It is printed in 2 parts to allow easy removal of SmartTag when needing to change battery or take on the go. Supports will be needed for the center portion of the holder. Be sure…
- Pobrania
- 44
- Polubienia
- 5
- Ocena
- 5
P
Printablesnickbits
Samsung/Aeotec SmartThings Door/Window Multipurpose Sensor Cover
The sensor only comes in off-white and is really ugly on dark colored doors. This cover can be used to match the color of the frame without having to paint it. Print in TPU (95) and it will fit snuggly. The model is not precise enough to…
- Pobrania
- 44
- Polubienia
- 7
- Ocena
- 0
P
Printableseloekset
SmartTag Bike Reflector Bracket
My bike couldn't fit a SmartTag 2 device, because the frame blocked the signal, so I had to make a box to hide it on the outside of the frame. I figured the backside of the rear reflector could be a great place to hide it, by making it…
- Pobrania
- 43
- Polubienia
- 7
- Ocena
- 0
P
Printablesclusterfuggles
eufy Security SmartTrack Link Case
A TPU snap enclosure for the eufy Security by Anker SmartTrack Link. Printed out of SainSmart teal TPU with the default settings for SainSmart TPU in PrusaSlicer. 0.15mm layer height paint-on supports under the keyring hole (included in…
- Pobrania
- 42
- Polubienia
- 5
- Ocena
- 0
P
PrintablesGuy Smets
Magnetic Case for Samsung Smarttag2
Magnetic Case for Samsung Smarttag2. It's designed to fit 2 14mm magnets (tight fit!) You'll also need a self tapping screw.
- Pobrania
- 42
- Polubienia
- 4
- Ocena
- 5
P
PrintablesSemaze
Galaxy SmartTag 2 Case - Blank Lid
I liked the original case, but didn't like the “2” added on the front. As such, I made a quick edit of a flat version and uploaded it here. There is a version with a reduced lip size, meant to be printed in PLA instead of TPU. This only…
- Pobrania
- 41
- Polubienia
- 5
- Ocena
- 0
P
PrintablesIsntPrusa
Mountain Bike MTB Fork Steer Tube Galaxy SmartTag2 Holder (Fox34)
This is a holder for the Samsung Galaxy SmartTag2 to fit into the steer tube of a standard bike fork. Designed for my Fox 34 fork, which has a max internal diameter at the edge of 34mm with internal tapering. The “Door” holds the…
- Pobrania
- 41
- Polubienia
- 14
- Ocena
- 0
P
PrintablesMarlosb
Samsung SmartTag Case
I know there are several other cases for SmartTags here, however, I wanted something different. I have tags on my traveling bags and we all know that bag are not always handle with proper caution. So, I'm afraid of my tag break and I…
- Pobrania
- 41
- Polubienia
- 4
- Ocena
- 0
P
PrintablesStefan
Xiamomi Scooter Lock holder/adapter with/without samsung smarttag
Remixed the file to hold my flexible bike lock. I also added a version to hold my Samsung Smarttag. I printed it with petg so it was flexible enought to slide the print onto the scooter. You aslo need 2x M3x10mm and 2 M10mm nut screw.
- Pobrania
- 39
- Polubienia
- 4
- Ocena
- 0
P
PrintablesEd
Samsung SmartTag Case
I wanted a strong case for the Samsung SmartTag to put under the seat of my motorbike. The case is made of 2 parts, uses 4 standard M3 brass heat inserts and 4 ISO standard M3 x 10MM cap heads. It has a hole in the middle so the button is…
- Pobrania
- 38
- Polubienia
- 8
- Ocena
- 0
P
PrintablesTeamJesus5Ever
SmartTag2 Magnetic Case
Remix of a cool design by Guy Smets. I didn't have any of the right size magnets on hand, so I made the holes a bit smaller for 10x2 magnets (should be able to fit 10x3 as well, I just liked the extra clearance) and to use a threaded…
- Pobrania
- 38
- Polubienia
- 3
- Ocena
- 0
P
PrintablessilentH
SmartThings/Aeotec Multipurpose Sensor Magnet Spacer
This is a spacer for the SmartThings/Aeotec Multipurpose Sensor magnet. I made it for the model that I own which is: IM6001-MPP01 Printed in PLA at 10% infill.
- Pobrania
- 38
- Polubienia
- 6
- Ocena
- 0
P
PrintablesLayersForLife, LLC
Samsung SmartTag 2 case - no click
Remix of @wisenull_1492384's case
- Pobrania
- 36
- Polubienia
- 5
- Ocena
- 0
P
PrintablesSantiago Alarcón Acosta
SmartTag Mount for Pets Collar
Track your pet anywhere from your phone, attaching a Samsung Galaxy SmartTag® to its collard
- Pobrania
- 36
- Polubienia
- 4
- Ocena
- 0
P
PrintablesTom Interloper
Carhartt Buckle for Male Side - Loop
This buckle was created as a replacement for a Carhartt Dog Collar Buckle (link below). While the female end of the buckle is metal, the male end is not and was chewed off. The part that connects the buckle to the closed loop and pin I…
- Pobrania
- 35
- Polubienia
- 2
- Ocena
- 0
P
Printablesjcar
Samsung SmartThings Multipurpose Sensor 2nd-Gen Spacer
This is a simple spacer for the Samsung SmartThings Multipurpose sensor (2nd-gen). As I started peppering these around the house I noticed that I needed at least three different spacer sizes. First I started with a rectangle, but that…
- Pobrania
- 34
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSergej
Airtag, Android Tag, Samsung Smarttag case for high power battery
Print lid and case in ABS or PETG. Seal should be printed in TPU. BOM: 4x M3 heatset inserts 4x M3x8 allen screws 2x Single AA battery holder or 1x AA 3v Holder 2x 14500/R14505 Li-SOCl2 3,6V Batteries or 2x 1.5v Lithium AA batteries Wire…
- Pobrania
- 33
- Polubienia
- 8
- Ocena
- 0
P
PrintablesVivero
Samsung SmartTag
Reverse engineering of a Samsung SmartTag
- Pobrania
- 31
- Polubienia
- 1
- Ocena
- 0
P
PrintablesOrangeCat
Carhartt Lunch Box Organizer (Custom Design)
Carhartt Lunch Box Organizer (Custom Design) I designed and printed this organizer from scratch for my Mom’s Carhartt lunch box, which she uses as her daily work bag. 👉 Carhartt Bag Link She wanted something simple to keep her items from…
- Pobrania
- 31
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBrandon
Magnetic Mount for SmartThings Button (Dual Screw)
This is just a remix of kyouteki's Magnetic Mount for SmartThings button. I wanted to be able to use a #8 wood screw and 2 8mmx2mm neodymium magnets. This let me place the holder in locations without a switch plate. Print instructions…
- Pobrania
- 30
- Polubienia
- 2
- Ocena
- 0
P
Printablesdrgeneious
SmartTag+ clip to mount with command strips
Remix of a clip for a Samsung SmartTag Plus for the larger size of the SmartTag+. I printed at 90% infill because less ended up with the split cylinder breaking.
- Pobrania
- 30
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAquaHorizon
ESRack - Samsung SmartThings Hub
The ESRack system includes components: Mounting Brackets - used to install unit in the rack, available in 3 sizes: Short Medium Long Device Modules - each module can handle a single device Possible Configurations: - [Mounting Bracket…
- Pobrania
- 29
- Polubienia
- 7
- Ocena
- 0
P
Printablesdb
SmartThings Button Wall Mount
A wall mountable plate designed to hold a SmartThings button. Remixed from: https://www.thingiverse.com/thing:3827965 and https://www.thingiverse.com/thing:5128845 Print with the show face on the bed, supports are not required if you have…
- Pobrania
- 28
- Polubienia
- 2
- Ocena
- 0
P
PrintablesFar North 3D Printing Services
Samsung SmartTag Waterproof magnetic case
I was asked by a friend to make a waterproof version of this model
- Pobrania
- 28
- Polubienia
- 1
- Ocena
- 0
P
PrintablesHans Sep
SmartThings multi-sensor 2nd gen
So I couldn't find the part of the SmartThings sensor that triggers the open close switch. Part is not 100% identical to original but from a distance no one will notice :-) Note when printing the model, printer needs to pause so you can…
- Pobrania
- 28
- Polubienia
- 2
- Ocena
- 0
P
Printablesiwannabswiss
Navimow Samsung Galaxy SmartTag2 holder
Designed specifically for the Navimow i110N, this custom container offers an alternative to the official GPS tracking accessory. It securely holds a Samsung Galaxy SmartTag2, providing an affordable and effective tracking solution. The…
- Pobrania
- 26
- Polubienia
- 1
- Ocena
- 0
P
PrintablesEikka Jokisalo
Ridge Wallet SmartTag 2 holder
SmartTag Holder for Ridge Wallet V2 without the hole for easier printing. A simple and slim holder that attaches to your Ridge Wallet and securely fits a Samsung SmartTag 2. Designed to keep your wallet trackable without adding…
- Pobrania
- 26
- Polubienia
- 4
- Ocena
- 0
P
PrintablesRaceReadyJ
Smartthings Button (2018) Light Switch Plate Mount, Magnetic
I use the Smartthings buttons essentially as locally available control for lights should the internet connection between Alexa and the Smartthings hub be offline. Also makes it easier on guests to control the lights. In order to keep the…
- Pobrania
- 26
- Polubienia
- 0
- Ocena
- 0
P
PrintablesGuerrero Jaguar
Soporte de Smarttag 2 para collar de perro
Espero les sirva este soporte para el Smarttag 2 de Samsung, es para fijarlo al collar de nuestras mascotas, la tapa se cierra por deslizamiento y se fija mediante 2 tornillos m3 que fijan la tapa y una porcion posterior que lo sostiene…
- Pobrania
- 25
- Polubienia
- 4
- Ocena
- 0
P
PrintablesCTX
Galaxy SmartTag belt pouch
When fetching my son from school, I always have to wait at the entrance to the playground while I try to make eye contact with him to let him know I'm there…this results in half an hour a day where I just stand there planted while he is…
- Pobrania
- 25
- Polubienia
- 5
- Ocena
- 0
P
PrintablesYatuin
Startt / Tronxy-xy100 X-axis Mod
I've created Prusa i3 mk3 inspired x-axis parts for Startt printer. Belts tensioned by X stepper tilt, adjustment by extra screw pushing on mounting screws There are 2 versions of idler side part: x_idler_v3 - Version for 5mm id, 6mm wide…
- Pobrania
- 24
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDaniel
Samsung SmartTag+ Holder or Rimowa luggage
Quick remix of macht_rebels airtag holder for Rimowa luggages adjusted for Samsungs SmartTag+. The holder simply clips between the suitcase back and telescope handle. Printed in TPU for better fitment and surface adhesion, should also not…
- Pobrania
- 24
- Polubienia
- 2
- Ocena
- 0
P
PrintablesBilliam
SmartTemperatureTower Plain Stand (fixed)(fixed)
Plain base, fixed the non manifold corner on one side Remixed From: SmartTemperatureTower Plain Stand (fixed) by pilotdude Smart compact temperature calibration tower by gaaZolee
- Pobrania
- 23
- Polubienia
- 0
- Ocena
- 0
P
PrintablesHonza Cigán
Samsung SmartTag 2 Case – Optimized for 0.6mm Nozzles & Glow-in-the-Dark PLA
Important Notes: Assembly: To keep the design simple and printable, this case does not have a snap-fit mechanism. You must glue the two halves together (a drop of superglue works best) for a secure hold. Glow Effect: As visible on the…
- Pobrania
- 22
- Polubienia
- 2
- Ocena
- 0
P
Printables3D Maker Kid
Imakr Startt MK10/8 Extruder
I couldn't find a model of this on Thingiverse or on here, so I decided to model it myself, it was a good project in Fusion 360. Beware, I have not tried printing this yet as I am currently occupied with other projects. Feel free to remix…
- Pobrania
- 22
- Polubienia
- 0
- Ocena
- 0
P
PrintablesGizmotoy
Samsung SmartThings Multipurpose Sensor spacer
I've been frustrated several times mounting a Samsung SmartThings Multipurpose Sensor as a door open/close indicator because some doors have a large offset between the door and the door frame. You can mount your Multipurpose Sensor…
- Pobrania
- 21
- Polubienia
- 0
- Ocena
- 0
P
PrintablesErik J
Smarttag 2 bike holder
Anti theft Samsung tag bicycle mount with 63 mm pitch holes. I printed with black ASA for Canyon Neuron 7. Also I used brass threaded inserts for the top stainless torx screws.
- Pobrania
- 21
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSaveYourBacon
SmartThings Water Sensor PVC Mount
SmartThings Water Sensor PVC Mount, designed for 2-inch PVC. I use this to mount a water sensor directly above my sump pump (for earlier notification of issues). Fasten with zip ties. No supports needed.
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 0
P
Printableshdrodel
Remote Back for Sony TV Model RMF-TX500U with Samsung SmartTag Slot
Keep your Sony TV remote safe and easily locatable with this custom-designed remote back for the Sony TV model RMF-TX500U. This remixed design features a dedicated slot to securely house a Samsung SmartTag, ensuring you'll never lose your…
- Pobrania
- 21
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKlaus Strom
SmartTag 2 Navee GT-3 Scooter Holder
Needed a Smarttag2 Holder because i don't own an Iphone. Remixed the Holder from BJKeane3! Big thanks for sharing the .step files!
- Pobrania
- 19
- Polubienia
- 4
- Ocena
- 5
P
Printablesingegneredentro
Samsung SmartTag 2 clip for PET, cats or dogs
EN Samsung SmartTag 2 clip for PET, cats or dogs, to pass through the collar or to use with a Keyring IT Samsung SmartTag 2 clip per animali, cani o gatti, da inserire nel collare, oppure come portachiavi
- Pobrania
- 19
- Polubienia
- 1
- Ocena
- 5
P
Printablesjens j
SmartThings Motion Sensor (rev 2.0) case for AAA batteries
Remix of "SmartThings Motion Sensor (2015) case with AAA batteries by oscahie" but the original design didn't fit the internals of my sensor which was a green PCB marked with "Rev 2.0", so I remixed this with a few changes to fit better.…
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSpiritofwinter
Samsung Galaxy Smarttag Holder
Made a simple holder for my 4 Galaxy Smarttags in a project to organize some of the things I have around my office. Printed with PLA, 0% infill, 0 solid bottom layers. No raft or brim needed on my FlashForge. 4 smarttags fit almost too…
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMoschi
SmartTag Mount for PowerTube 625 / 500 Batteries (Cube E-Bike)
[EN] This custom mount securely holds a Reyke Smart Tag Pro (a budget-friendly alternative to the Apple AirTag) inside Cube E-Bikes equipped with a PowerTube 625 or PowerTube 500 battery . It is designed for Cube models that support the…
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMetalRa1n
Wallet Case for Samsung SmartTag 2 with Cover
I like the original design by Guy Smets, the cover is a good feature. Couldn't find any good wallet attachments for the SmartTag 2 that have a cover, so I redesigned the bottom part to be a wallet attachment. It supports the original…
- Pobrania
- 18
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBeeFarm
Carhartt cooler backpack liner
Needed a liner for Carhartt backpack cooler so lunch would not get crushed. Made a simple rectangular liner has no bottom or top. Works very well. Step file in case you need to scale or modify.
- Pobrania
- 18
- Polubienia
- 5
- Ocena
- 0
P
Printablesgeneric0000
Switch game case with Samsung SmartTag2 holder.
I was tired of the kids misplacing the switch game case, so I designed one to include a compartment for a Samsung SmartTag2. I also fixed a few things that were bothering me with the old case design. I used a m3 heat set insert and screw…
- Pobrania
- 18
- Polubienia
- 6
- Ocena
- 0
P
PrintablesDerFloDev
Customizable Bicycle SmartTag / AirTag Mount v2 (Compact & Material-Saving Remix)
This is a refined, even more compact version of my original Stealth Tracker Mount. I’ve optimized the design to reduce the overall footprint and material usage, making it even less obtrusive while maintaining the same robust protection…
- Pobrania
- 16
- Polubienia
- 1
- Ocena
- 0