40 modeli
General I noticed a bit of motion on my Astro-Tech AT60ED when everything was put together. I don't know how much affect it has on imaging but I didn't like it. This isn't the strongest of designs, but it should be super good enough as…
Wydruk około 1,65 €–2,01 € nettoWstępna wycena jednego wariantu
Easily clip your LAN cables without need of securing them , all files to make your own remixes are in DWG , message me for Rhino files , you can change screw diameter , angles, or redesign it all if you wish (as long as you give me a…
For pulling CAT5/6/7 cable snag-free through other mess of cables / drop-ceiling / raised floor Works when pulling just one cable out of a mess of cables, or when pulling a new cable through to replace a broken cable. Note: Always use…
These combs are designed to be zip-tied or hot-glued to wire shelf decking, I'm sure they will fit into other spaces as well. I'm hoping the flexure makes them work decently for cat5e as well. Design considerations/quirks The outer…
I was trying to mount a keystone jack in a unique location using a typical single gang US electrical cover, and it was much too large to fit in the space. I recreated the mounting mechanism and put it on a small disc. It holds the jack…
Tool for untwisting and straightening twisted pairs in network cables. Simply insert the tool between a twisted pair and pull. If the wires need to be straighter, run them through the tool again and squeeze them straight. It is possible…
Hello i made this very simple but effective RJ45 keystone holder. this part can be implemented and mixed with other 3D designs that need a RJ45 connector to them. recommended to print with PLA and not with ABS. ABS is more prone to…
Holders for neatly running Cat6 (6.5 mm diameter) network cables on IKEA Skadis pegboards. There are a few variants available: Horizontal for running cables horizontally Vertical for running cables vertically Vertical narrow, 11 mm c.t.c.…
Original design by Greys which can be found HERE . General Info This is a cable comb/mount that can be used on wire shelving, server racks, walls, and more. The mounts can be used with either small zip ties or screws. If using zip ties or…
This is a keystone insert for a voron 2.4 front skirt, so that an ethernet connector can give easy access to the SPI port on the controller board or the Raspberry Pi inside the printer. This is to simplify connecting an ADXL345 when…
This is a wire comb I made for straightening out Cat6A cable before crimping. You put this on your index finger and then pull the wire between your thumb and the comb, along the grooves. It makes straightening out the wires way easier,…
This is a remix of Greys' Flexture Cat6* Cable Comb , which allows using large 3M Command Strips for mounting. This is the version that can hold up to 12 cables. There is a 3MF Bambu Studio profile included, which has 4 of these set up on…
Cable comb for thicker Outdoor coated Cat6.
This is a keygaurd for TouchChat60basic in the commonly purchased Bam Bin case for an iPad 8. The keyguard is set with the menu button open and the speech display / message window set to 2 lines (no icons). There is no mounting,…
Originally designed for a Startech.com 6U wall mount server rack. But should work with their entire line of wall mount server rack products. It's a two piece design. You can installed the CAT 6 terminated or unterminated it doesn't…
I'm running some Cat6 outside for a camera, but I have fiber-cement siding (commonly known as HardiPlank) and couldn't staple the network wire. I noticed the siding planks had small gaps where they overlap, and upon further inspection,…
This is a remix of the model from Chris with the only difference that the magnet pockets are slightly reduced to fit 5x3mm magnets that I had already from a previous project.
Creates a cable comb to hold ethernet cable against 2020 extrusion. Designed for a Netgear 24/28 port switch.
A cable clip for a Cat6 cable with a diameter of 6mm in my case. The cable snaps into place and can be removed if needed. You'll need double-sided tape or nails/screws to secure it in place. Post-Printing After printing, you'll need to…
There are 3 models included in the STL file. There is a straight and offset to allow for 90 degree runs horizontally and vertically and the final model is a blank label that can be used to clip on to the cables. This one is intended to be…
Replacement for food processor pusher. Print in PETG or other food safe filament.
This is a custom model for the THT version (https://www.chat64.nl/downloads.php) of the Chat64 cartridge. The original model fit a bit tight in my breadbin so I created this and added a few QOL enhancements: The “top” takes an M3xD5…
Adapter für die Festool AT 65 EB1. Der Sauganschluss der Maschine ist ja leider etwas oval und ich fand auch keinen original Ersatz mehr. Von daher diese 3 Files. Das große habe ich komplett in TPU gedruckt. Der Außendurchmesser beträgt…
Bahtinov mask for diffraction focusing of at60ed
I needed to convert my old patch panel that uses crimp termanials to RJ45 keystones (yes I hate working with termination, and this is just easier. And it uses the origional mounting screws. Please note - the edge bumps on the keystones…
These are highly modified skirts from the original Voron2.4r2 CAD drawings to incorporate honeycomb mesh behind the original hexagon skirt design. This mesh is created by utilizing the Slicer's capability to specify a part of an object to…
I can't claim to have “made” this model, it was generated from skye.rocks mask generator based on input values. Tweaked for fit but tried to retain the math aspect for this telescope, an Astro-Tech AT60ED Boss diameter: 75.70mm, the part…
I made this cable clip to help manage an ethernet cable to my exterior cameras. It slides on to the bottom of common house sidings and holds snugly. opening is 10.5mm at the narrowest and 13mm at the widest. This should allow some play in…
A straightforward wall-mounted clip designed to organize network cables neatly. It holds up to three Cat5e, Cat6, or similar cables, while the clip provides sufficient grip, a dedicated zip-tie channel is included for installations that…
Printed in Aurarum PETG. .2mm layer height. Uses a 7GA screw to attach to building framework. Right size, impact driver, no hammer! Over tightening will cause it to split though.
This is a replacement cover for the audio-technica AT6011 anti-static record brush cover. For printing, I used organic supports to support the pegs.
I used mamut glue to mount. Use zip-ties to mount cable.
This is a simple plate to mount a Meerkat6 mini computer from System76 on a wall using its included VESA mount plate and a couple of command strips or any double sided tape that can support the weight. Basically it just gives a large flat…
Mount a CAT6 cable splicing block. Printed without supports. You can use a M4 or a #8 screw to secure the block. I have to warn you that once the block is attached to the mount it is not easy to remove. I had to slide teasers under one…
Náhradní ventil "B" pro vzduchový rozvaděč v domovních ČOV AQUATEC - STANDARD.
Parametric cable comb for organizing Cat6 network cables in server racks and homelab setups. 24-port version keeps cables neatly separated in a waterfall pattern. Three variants included 1. Basic: clean comb with no mounting holes, rests…
Náhradní ventil "B" pro vzduchový rozvaděč v domovních ČOV AQUATEC - STANDARD.
Segway Snarler 600GL ja Segway Snarler AT6-L Passenger backrest lower covers. Manufacture don't sale them separate. Printed whit anycubic resin. Tough Resin 2.0 If you’re unable to print it yourself, you can also purchase a ready-made…
These combs are designed to be zip-tied or hot-glued to wire shelf decking, I'm sure they will fit into other spaces as well. I'm hoping the flexure makes them work decently for cat5e as well. Design considerations/quirks The outer…
Segway Snarler 600GL ja Segway Snarler AT6-L Passenger backrest lower covers. Manufacture don't sale them separate. Printed whit anycubic resin. Tough Resin 2.0 If you’re unable to print it yourself, you can also purchase a ready-made…
