Liczymy pasujące modele…
This is another of my Star Gate project. The Arora is 60 cm long and it has retractable third leg so that it can stand on its own without any stand. All fits togeher via pegs and holes. No need for a glue. Check this playlist for the info…
This is the fourth of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
I created for my Aurora Lily58 PCB Kit with MX switched from splitkb.com thie case. I used for the Oleds this Model: Aurora Lily58 Oled Housing PCB Hardware that I used Aurora Lily58 PCB Kit from splitkb.com with: RGB Underglow, RGB…
This is an N scale loco shell. I played with this 1968 CP version when I was a kid and modeled the shell as practice in fusion360. In N scale it is only resin printable, but if you scale it up should be a decent HO model. It's neither a…
Split up specific stls for printing with different colors in case you have an MMU or equivalent. Gray bits Black bits Copper bits Blue window bits Yellow engine bits Mostly followed Martin's CAD on Youtube for colors, but it's not like…
Princess Aurora's Crown inspired by Sleeping Beauty for Child's Halloween Costume
Sized for an adult, but can be scaled to fit anyone. Scale in x and y to fit your needs.
The mounts are intended to hold the nanoleaf aurora LED lights on a wall. These use sewing pins at 30-degree angles (similar to ook picture hangers). It is my belief that these are strong enough to hold the lights while being easy to move…
This model only uses 8g of filament and takes about 2.2 hours to print. This model can be difficult to get a good first layer due to the thin structures. I have found that turning off the Optimize Wall Printing Order setting in Cura would…
Aurora Lily58 Oled Housing to protect oled and customise your look. Should also fit the Lily58pro model or any other model that has an oled right above the rp2040 board. The housing gives more strength instead of flimsy floating piece of…
I was in need of a second Lily58 low profile keyboard so I order a new PCB kit but to my surprise this time it did not fit my old case. So I adjusted it to fit it flawless. with this new version the Keyboard is 0.4mm lower as the previous…
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…
if you need to edit something on the model, write to [email protected], if you don't want to redo it completely, I'll do it for free
See the PDF file for print and assembly instructions. If you own a Bambu Lab printer, I have the print profile on Maker World ( CP-140 Aurora Model Plane by RADdesign - MakerWorld ).
This is my Fusion360 file for the SplitKB Sofle v2 (Kailh Low Profile Choc Switches/hot-swapable), its pretty bare bones and just the top and bottom plate. This makes it easy to edit and adjust! I've attached some pictures on how it…
Nachdem im Januar 2022 die produktion von den Nanoleaf Aurora eingestellt wurde, ich 2 Linkers zu wenig für mein set hatte, habe ich mich hingesetzt und dieses kleine schmuckstück gemacht ich habe 4 kabel von einem Lan kabel genommen,…
🐉 Aurora Dragon Bust – Elemental Dragon Series 🌌 Feel the magic of the lights! The Aurora Dragon Bust channels the mesmerizing dance of the northern lights — a living sculpture shaped by flowing waves of color and ethereal glow. Its body,…
Standard FLARM aurora mount is glued onto the drone. This adapter to mount FLARM Aurora to DJI Matrice 30(T) using the E-Port/PSDK without glues to allow for removal. M3 (to drone) and M2 (to aurora adapter) screws are required.
Not bad, monsieur. Not bad at all. Isn’t it silly when a netrunner struts about in rags when elegance is so easily achieved? The color — it brings out my eyes, non? I do adore it. And the jacket is functional? How charming. Spinal…
PCB Hardware that I used Aurora Lily58 PCB Kit from splitkb.com with: RGB Underglow, RGB Backlight Choc Hotswap sockets Microcontroller: Liatris Microcontroller Case hardware Aurora Lily58 Low Profile Case from splitkb.com : Top Plate /…
letra grande em branco nome em roxo colados com fita dupla face
Main Piece This item includes several options for mounting your Lutron Aurora Philips Hue dimmer. Lutron sells a “L-AWALL1-WH” plate for mounting (intended to mimic a “traditional” switch that the Aurora can mount to natively), but this…
Dont mind the quality of model that i printed i just used the wrong plastic
A low-profile case for the Aurora Sofle V2 keyboard kit by splitkb. Designed for the Choc hotswap kit, based on plate files provided by splitkb (https://github.com/splitkb/aurora). Includes a window for the OLED screen, but excludes the…
Alternative version of Aurora the Cleric with different equipment and a more fighter-like appearance. By default the model is scaled to fit with other 28-32mm miniatures. Printed on an FDM printer without issues and no supports. If you…
This case I design houses the Aurora Lily58 from splitkb.com and has space for a 103040 Li-Po battery with 1200mAh. You will need 12mm standoff from the Plate, through the PCB to have enough space to clear the battery. I attached the…
This model allows to mount a E3D-V6 or E3D Revo Six all-metal hotend to the JGAurora A5. It offers to either use the existing bowden setup on that printer or alternatively mount a Zesty Nimble Remote Direct Extruder V1.2 (mounting a V2 is…
The Lutron Aurora is intended to be mounted on top of an existing light switch. I designed this wall mount because I wanted to mount mine somewhere where there was not an existing switch. I've included two versions: (A) has a smooth back…
I created this so I could easily wall mount my Lutron Aurora dimmer using double sided tape. It fits into the existing Aurora base and provides more surface area for tape to stick. Could also be used for extra stability if you were just…
Disclaimer: This is not an official model by JGAurora or even based on official measures. All measurements for this model were taken from my JGAurora A5 printhead and may be different on your printer. Before taking this model as a base…
Remix of the CR-10 Vibration Dampers with a smaller diameter of 23mm, matching the rubber feet of the JGAurora A5. Tolerances allow for easy assembling. These PLA vibration dampers help to significantly reduce printer noise, and in my…
Test model - designed to be my first test print on my C1 INDX Founders edition. Its 11 colours - but the plates should be able to be arranged into sets of 8 colours. The profile has been definite based on the C1 MMU3 - with 11 extruders.…
I made the season of AURORA season emblem, I made a version with a hole and a version with a loop at the top I didn't want to fill the entire background so used part of a circle to connect each of the separate parts and honestly I think…
I modeled this big enough to pretend I was going to actually put it on a headband and wear like the one in game but I just thought it was a good shape and wanted it so I don't know if its a good size to be a heaband. If you want it to be…
Simple and straight to the point. The SIOnyx is a fun night vision device, with a glaring issue. The front of the device is flat, no lip for protection, glass. It is so easy to accidentally scratch the lens and traveling with it there is…
JGAurora A5 and A5S Hotend Upgrade D.Drive Dual 5015 Fan Abl Sensor
Case & oled cover for the splitkb Aurora Corne split keyboard.
I live in an apartment so I don't want to mess with removing the paddle switch so I designed this to replace the decorative plate and simply install over the paddle switch. No need to mess with electrical wiring. Update 9/13/22: Slimmed…
Bring this stunning, highly detailed heroine figure to life! Carefully designed with a dynamic pose and intricate costume details, this model is perfect for figure collectors, tabletop enthusiasts, and miniature painters. Whether you are…
Replacement Gear part for Aurora AS1018CD Paper Shredder that i've made to a friend Print Settings Printer: HyperCube Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 Infill: 50% Category: Parts
Simply put, this is a cap that turns a great flashlight with a straight beam into a "lantern" with a 360 degree light
Training Tool to learn columnar layout keyboards like the Aurora Lily58. Mirror it for the other side. Can be printed with some light tree supports for the overhangs, but wihout supports and some minor clipping should be fine too. Can be…
My Cooling Ducts using Fans 5015 24V https://www.amazon.com/gp/product/B079BPS9Q8/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 The Hot End Duct ONLY was Remixed (Completely Redrawn) from https://www.thingiverse.com/thing:2994069 Print…
Hot Bed cable chain for JGAurora A5S/A3S Middle part from https://www.thingiverse.com/thing:3954315 Printer: JGAurora A5S Rafts: No Supports: No Resolution: 0.4mm nozzle, 0.15mm layer height Infill: 30% Filament material: PETG Notes: I…
Aurora Logo It can be printed in multi color eather in Bambu Lab studio, or in Cura by adding a pause in the layer tool, to shift filament. It can also be printed seperately and glued together. Will recommend printing the parts upside…
The LED table lamp Aurora combines functionality and modern design, ideal for those looking for a decorative and practical solution. Made from PLA, it is designed to be easily printed without supports, using a 0.4 mm nozzle, 0.2 mm…
Aurora Unit 242 is one of the helper characters from Metroid Prime 3, I used it for the "organic component" inside the BOX Security Robot (link here https://www.prusaprinters.org/prints/86401-box-security-robot-metroid-fusion ). The brain…
This is a super easy print for a low profile case, with battery inset. If you want to use a bigger battery for your ZMK lily58, you can “hide” the battery in the case and enjoy longer battery life. This case also eliminates the use of…
Wall art: Aurora (two colours)
Works well with the vanilla JGAurora A5 hotend , or any of my custom printheads for the JGAurora A5: Vanilla JG A5 hotend with Zesty Nimble Remote Direct Extruder V1.2 E3D V6/Revo Six Hotend with Zesty Nimble Remote Direct Extruder V1.2…
Easy mounted upper support for Z axis JGAURORA A5. The ball bearing 8x7x22 was applied. Solidworks model is attached, you can customize it to any other bearing Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
This thing allows to mount a 3D-Touch bed leveling sensor to the side of the printhead. It fixes two major issues I had with other mounts: It does not collide with the frame when moving the Z-gantry all the way up. It avoids long levers…
Based on my initial top and bottom plate I added a new case that encapsulates the pcb and controller to give them better protection. See original top/bottom plates here:…
This is E3D--V6 Hotend Mount for JGAurora A5S (A5). Main Body was remixed from https://www.thingiverse.com/thing:3828989 It was remixed also but it had a Step File that It could be easy to modified. The whole thing can be used in full…
Fan duct and matching fan grille for mounting a fan directly above a MKS GEN_L board. When used with a thin fan (8010), the design fits right inside the JGAurora A5 with enough headroom for the Y-axis gantry to pass over. Required parts:…
see it in action: https://www.youtube.com/watch?v=y09F-JLID-o I'm trying to support masksfordocs ( https://twitter.com/MasksForDocs ), but only printing these 3dverkstan visors just 1, 2, or 3 at a time means there is lots of printer…
Appart from the original model: * I added a normal case bottom * Fixed the cut outs on the side to fit the strange side reset button of the Aurora Corne
This probably works for other flashlights in the Aurora series, but it needs that grip area. Some of the metal Aurora flashlights (A11) do not have that grip area It prints in two parts; lay them flat like shown. I recommend PETG, but PLA…
My Youtube Test of the Chain Link UPDATE: Add a New Version of the Adapter, Adapter-Lock, Link, Link-Lock, Loop, Last Link . The Older Version was working but it was sagging in the center. This new version will keep that more natural.…
Datos básicos Nombre real : Jeanne-Marie Beaubier Alias : Aurora (Aurore en francés) Especie : Mutante humana Universo : Tierra-616 (Principal) Nacionalidad : Canadiense Lugar de origen : Montreal, Quebec, Canadá Primera aparición :…
My remixed for my Cooling Setup https://www.thingiverse.com/thing:4553114 This is completely redrawn from his design.... There was a lot of problems that need to be redrawn to make it work for my cooling system..... But can be used on…
It's a fan grid for the front 40x40 mm fan. Enjoy. Category: 3D Printer Parts
The JGAurora (now rebranded JGMaker) A5S is a great printer, and I'm very happy with almost every aspect of it. However, one place where it definitely leaves something to be desired is in the stock part cooling system. While it worked OK…
Llaveros con la forma de máscaras que utilizan en el video música de “cure for me ” de Aurora Aksnes. Son tres modelos diferentes con 3 colores. Material PLA, altura de capa 0.2mm: Se inicia con una base de PLA blanco En la capa 10 se…
The Ancient Drone from OSP Red's Webcomic [Aurora](https://comicaurora.com/) including the undamaged version and concept art designs she didn't use and posted to her tumblr The one labled dumb was labeled dumb in her sketches If you want…
Header Strip Female --- ATmega32U4 + pins --- 0.91 inch OLED Header Strip Female —
Aurora Planter – Conjunto Minimalista para Impressão 3D O Aurora Planter é um conjunto exclusivo de dois vasos minimalistas, projetados para trazer harmonia e sofisticação a qualquer ambiente. Com uma estética elegante e atemporal, essas…
Aurora Lily58 spacers for low-profile case with mx hotswap sockets. If your keyswitches are not 100% pushed into their hotswap sockets you can use these spacers to push the entire PCB closer to the top plate holding the switches. Spacers…
Fan duct modified from BlowHard 3000, fitted for the printed X-axis mount. Print Settings Printer: JG Aurora A3S Rafts: No Supports: Yes Resolution: 0.15mm Infill: 20% Category: 3D Printer Parts
UPDATE: July 24. 2020 I uploaded Version 4 of the adapter. The reason is that I need to make cut so my new Cooling Fan can fit in home X position. This is an Add on to the Chain Cable from https://www.thingiverse.com/thing:3954315 It…
I recently purchased a Nanoleaf Aurora and while I was excited to get the light, I wasn't excited by the power adapter and extra cabling. Since I was going to be mounting this on a wall with nothing covering the outlet, I thought I'd…
BLTouch mount for JG Aurora A3S/A5. Tested on an A3S. It aligns BLTouch's X axis with the nozzle, and it's about 40mm in front of the nozzle. Use M2.5x16 or M3x16 screws and washers to mount the sensor to the appropriate Z offset. Use the…
This is another version of palstic crimp tipe for JGAURORA A5. The main difference from other models - tube fixed by outside diameter. Installation is simple, disassembling is not necessary. Tube and holder tied up by plastic buckle in…
Top Spool Holder https://www.printables.com/model/430187-top-spool-holder-mount-for-jg-aurora-a5s WATCH Video Guide https://www.youtube.com/watch?v=NURhh43b-LU ! MAKE SURE THE END OF THE BLACK SHELL IS ABOVE THE FIRST CLIP FROM THE E…
Remix to add a circle for extra surface area for command strips
I really like the design and airflow that I got from the original part, version 2: https://www.thingiverse.com/thing:3943491 However, I found the mount to be really weak and wobbly. The slot holes don't leave much material at the top and…
The lamp body must be printed in Vase mode! It's easy to print and assemble. It's good as mood lighting for your desk or living room. I used SUNLU PLA+ 2.0 Klein Blue and Black filament.
Model I built for mounting a MUM-14 originally. Expanded to the Sionyx later. dimensions are pretty simple if you want to add your own device, and based on metric nuts & bolts (think M6, M5, M3, etc)
Lutron Aurora Rotary Knob Mount using magnet or screws. Had one of these that the factory screw stripped or cross threaded or… so instead it uses a small screw to attach the OEM mount to the print. Space for 10mm magnets or use of two…
The Lutron Aurora comes with a bracket designed to clamp onto a traditional light switch. This helps lock the light switch in the on position to ensure smart lightbulbs are always powered on. That's all great, but when I moved, my new…
Headphone mount attaches behind the I/O panel
I remixed this to either be drilled and tapped for a 3mm bolt or to insert a 3mm nut. The nut might be tight to press in. I just used a hot soldering iron to heat up the nut and melt the plastic around it. Print Settings Supports: No…
There are 4 objects in this STL file. The FDM lens cap has a lens anchor and cap, 2 pieces. Both have a notch, to distinguish from Resin version. I just used PLA, can work fine as PETG. Resin version fits on smoothly. If you prefer to…
This stand has been designed to fit the Alienware Aurora 11 series. Prints in two parts due to bed size limitation. NOTE: This project is very hard to print without edges lifting. I added some extra support in the corners and set the…
3mm hardware. 100% infill.
Top and bottom plate for the Splitkb Aurora Helix You can use this to handwire your own. Use this kind of spacers to mount the top and bottom. https://splitkb.com/collections/keyboard-parts/products/aurora-low-profile-case-hardware-kit…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre An elegant and graceful figurine inspired by Princess…
This brush holder, intended for cleaning the nozzle on the JGaurora a5 (a5s) printer, comes with a START gcode script to position the nozzle conveniently for cleaning with the recommended copper brush from AliExpress:…
This is a Remix of the REmix because there was a STEP file included so was easier to make modification. The original posted had a problem with Z-Axis that wiring would be crashed in the frame when going all the way to 320mm. This Remix of…
goes on the original stepper motor mount with screws stepper motor mount https://www.printables.com/model/430180-direct-drive-conversion-for-jg-aurora-a5sa3s
Works well with the vanilla JGAurora A5 hotend , or any of my custom printheads for the JGAurora A5: Vanilla JG A5 hotend with Zesty Nimble Remote Direct Extruder V1.2 E3D V6/Revo Six Hotend with Zesty Nimble Remote Direct Extruder V1.2…
JGaurora's Z-axis guide. It reduces Z-axis shake and improves printing quality. Use size 608 bearings.
Es ist nur ein erster Entwurf für meinen Lüfter am H2 Extruder für den Tronxy X5S. Aurora V1 Duct. Es wurde so designt dass der Lüfter beim Homing nicht gegen die vordere Stange fährt und noch Platz ist. Für die Löcher brauchen sie…
The A5 is a pretty good printer afterall. A lot of good points and of course some not so good. For me the first one one is the stiffness of the Z grantry. That's less than what we can find on a CR10 or a Tevo tornado and other clones by…
Now sure how useful this will be. I inherited an old HICTOP Aurora 3D printer a while ago. I had designed this power supply cover which worked great. Just before I got the printer working my dog tripped on the power wire and slammed the…
Quick and easy mount for the Lutron Dimmer Switch I used an M3x6 to attach the dimmer base to the mount, then a piece of double-sided tape between the mount and the wall
![JGAurora A5 E3D drag knife mount [vinyl cutter]](https://media.printables.com/media/prints/220680/images/2169946_a08cad64-b9a9-4156-a081-ea37a210185c/screenshot_20220711_095332.png)
