Liczymy pasujące modele…
This is a single component file with enough detail for developing cases, projects, and peripherals for the Pi Pico 2W. This is not a PCB file, nor is it representative of all surface-mount components- many tiny capacitors, etc. were…
This is a fun beginner project for anyone to make! It is a four legged spider robot platform using Raspberry Pi as the brain, 3D printed parts as the body, and many readily available electronics from amazon or banggood. No custom PCB is…
I really struggled to find anything easier and functional than over complicated and bulky solutions, so I ended designing this. This is not a final design so please if you notice any problem or you have suggestions on how to improve it…
Screwless Raspberry Pi 5 Case with easy access to GPIO, PoE and Camera Print with supports in order to get a good fit for the snaps as they are overhangs. Tried to get them at an angle for better printing but it makes the case loose To…
This is a tool to quickly plant bare root strawberry plants. It can push the roots up to 9 inches deep. Similar to the tool used in this video:
I really liked the original ESRack system design created by @EvilProphet . Although it has mounts for many devices it lacked mounts for Raspberry Pi. Therefore I present one designed by me for this specific passive cooler that could be…
I needed to hang my camera from a under shelf that holds my filaments over the printer. I remixed this base to strengthen the base (thicker) and placed some screw holes. Thanks for the original designer.
A set of printed components to build a 2WD Robot that is controlled and managed by a Raspberry Pi Zero and a L298N motor controller that uses a custom PCB (flexbot) to simplify the wiring/interconnect. This (quite early development c.…
The mount I designed as seen in this video: https://youtu.be/8yjHQ3v1obE Category: 3D Printer Accessories
Hyperpixel 4.0 Square Touch with Raspberry Pi5 enclosure (work in progress). (Update: 09/11/25 - I will be back to adjusting this design. Your input is very welcomed) This is the base test enclosure for an upcoming project. There are some…
Remix of John_Sinclair case on Thingiverse. Added : - Raspberry Pi Logo vent holes. - Octoprint wording - Slot for Raspberry Pi camera ribbon cable. Printed in PLA - 2 colour to match Ender 3 colour scheme.
The lid compresses onto the edges of the PCB, holding the Pi safely in place. Two sliding clips hold the lid in place. The case comes with openings for all ports and the top can be modified to expose the GPIO. Should fit most models…
I needed an easy way to do simple tasks at my Octoprint controlled printers. This case houses a Pi 4 with 6 Cherry MX switches and their key caps, along with a 8 neo pixel bar for status lights. These all hook up to the gpio and can be…
Print settings Filament: PLA Layer height: 0.20mm Nozzle: 0.4mm Infill: 15%
You can build a tap-to-play video player using a Raspberry Pi 5, Adafruit's NFC Breakout and NFC cards. Full Tutorial https://learn.adafruit.com/nfc-raspberry-pi-media-player To play a movie, just tap an NFC card over the 3D printed case.…
Made as a stand-in so I could model & measure my 3D-printed cases without having to use my actual pi.
Give your Raspberry Pi 4 the stunning enclosure it deserves! I designed this case with an organic, generative pattern, not only to be a visually striking piece on any desk but also to maximize airflow and keep your Pi running cool. It's…
python code: https://github.com/tojatomasz/raspberry-spotify-pause fusion360 file included if you want to create system like that in your environment and have questions (cuz the project i'm uploading isn't the clearest one) feel free to…
This is a low-profile case for the Raspberry Pi 5 with the NVMe base. Everything aligns perfectly with the I/O. There are two interchangeable versions of the upper case: one with access to the GPIO, and the other enclosed. Print Settings…
Just like the original it uses 2 m2 screws and m2 nuts. Then it clips onto the electronics box of your printer.
Logitech HD Webcam C270 support Camera Raspberry video de surveillance
Adpated raspicamcover_nolense.stl file to fit the newer module 3 cameras
Build a professional protective housing for your Raspberry Pi 5 with Waveshare Connector Adapter. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
Build a professional protective housing for your Raspberry Pi 5 with the official Raspberry Pi M.2 HAT+. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry…
Build a professional protective housing for your Raspberry Pi 5 with Pimoroni NVME Duo integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
Build a professional protective housing for your Raspberry Pi 5 with Waveshare PCIe to M.2 Adapter. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
Build a professional protective housing for your Raspberry Pi 5 with Waveshare PoE HAT integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
Konečně může vaše tiskárna Bamboo jít důstojně na záchod. Konečně může důstojně pálit kadidlo. Nečekejte a tiskněte
Raspberry Pi 4 housing made for a project, the pi is a tight fit inside the box, holes along side of exterior are for cables and zipties for cables. I believe I used 2mm screws for mounting the pi, 3mm for the lid, and 4mm for mounting…
This case fits a Raspberry Pi Pico, a sensor and 3 AAA Batteries The sensor is a AHT20 / BMP280 combo with digital temperature, humidity and air pressure. It suppors the I2C interface so reading values with the Pi Pico ist easy. Some…
Stores 3 x Raspbverry Pi 3 in a 2x2 Gridfinity grid.
Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro video HERE and the teardown video HERE . ***ASSEMBLY VIDEO NOW LIVE CLICK…
Prusa Referral Program: Need to upgrade your Printer? Referral Links🔗 for an extra 1kg PETG Urban Grey at checkout with the purchase of a Prusa Core1 / L / XL . Prusa T&Cs . Allsky Meteorite Camera Inspired by the Thomas Jacquin concept.…
The full instructions on creating a hidden AI camera with Raspberry Pi: Find 3D-Printed RC cars here.
This is a Raspberry Pi Camera Case Holder for Prusa IKEA Lack Enclosure. It's a very sturdy permanent solution for the Lack Enclosure, adjustable in 2 directions (up-down) and (left-right). Fast and very useful print!
Informations This is a Box for mounting underneath of a Epson TM-T88V label / bon / receipt/ pos printer holding a Raspberry Pi Zero W (or Zero 2 W) for use them as Wifi Bridge. The Raspberry will be Powered from the RJ12 6-Pin Port from…
A gridfinity holder for storing multiple Raspberry Pi in armour cases. Also has slots for two Raspberry Pi Pico. I've included the original Fusion 360 model. Could be tweaked so that you can also store microSD cards as well. Printed in…
Gridfinity holder for Raspberry Pi 5 in Official Case. Printed in PLA.
This mount encloses the camera and mounts it to the rails under the bed. Designed for an octoprint or other print monitoring setup. You will need 2 t-slot inserts and M3 10mm screws to mount the base to the rails. I printed these t-slot…
Screwless Raspberry Pi 5 Case with easy access to GPIO, PoE and Camera Print with supports in order to get a good fit for the snaps as they are overhangs. Tried to get them at an angle for better printing but it makes the case loose To…
I wanted to put my 52Pi ICE Tower Cooling Fan on my Raspberr pi 5 but the brackets were incompatible due to the PoE header. So I made my own. The 52Pi ICE Tower Cooling Fan was originally made for the Raspberry pi 4, but these brackets…
This is a custom screen enclosure for the ELECROW Raspberry Pi Touchscreen 5" monitor (amazon non-affiliate link below). I have this monitor mounted in a Lian Li case - which did require cutting a hole in the mesh part of the case.…
Gridfinity 1x2 base that holds the case for my raspberry pi. the case shown is not my own(cant find the original model)
This is a remix of the Raspberry Pi Zero frame for Einsy Rambo by Prusa Research . The original only fits the Raspberry Pi Zero, but this frame fits Raspberry Pi Zero W as well as Raspberry Pi Zero 2 W. (The Zero 2 has components in…
I have been using russross’s 1U design up to this point (Raspberry Pi 4 1U rack-mount bracket by russross found at https://www.thingiverse.com/thing:4125055 or https://www.printables.com/model/458627-raspberry-pi-4-1u-rackmount-bracket ).…
Mounting adapter plate to allow the BTT RaspberryPad5, 3D printed backplate to mount to the original Ender 3 V3 SE screen mounting bracket peg interface. This allows you to mount your Klipper host running KlipperScreen (or anything using…
Build a professional protective frame for your Raspberry Pi 4 with integrated 7" Touch Display 2 mounting. This horizontal mounting variant provides an optimal viewing angle without top-side cutout. Here we offer you the STL files for…
Build a professional protective frame for your Raspberry Pi 4 with integrated 7" Touch Display 2 mounting. This vertical mounting variant provides an optimal viewing angle without top-side cutout. Here we offer you the STL files for…
I needed a simple stand for an additional Home Assistant Raspberry Pi kiosk I am adding to my home – so I whipped this up. You’ll need some 2.5mm screws for assembly (I used socket head cap screws). Add some rubber stick-on pads to keep…
Maturity: Very Good. 9 prototypes. In use since 2024/03. Hardware: 2x M4x16 ISO7380 to fix the screen case on the mount 2x M6x16 to screw the mount on the aluminium profile (M5 if you have M5 nuts) 2x M6 rail nuts Log: 2024/03 Initial…
This is a direct edit of the “__raspi_module_1_01-SIF_OLED.stl” module from the Modular Snap Together Raspberry Pi Case , and the only things i changed is 1: I made the OLED cutout bigger to allow you to mount it forwards or backwards,…
A simple case to mount a Raspberry Pi Model 4 B onto the frame of the MK3S using the existing, unused, M3 screw holes. Some clips to route the USB power cable along the rear of the frame upper arm, out of sight. It's a simple, clean and…
Strawberry-shortcake The size can be adjusted in the slicer 25% infill ,quality 0.2 supports no , pla colors can be added in the slicer Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
This is a remix of the popular Raspberry Pi 4 case, modified for rack mounting on either the left or right side, with optional support for a 40mm fan. Required Hardware: 3 M3x18 screws to secure the top of the case to the bottom.…
Raspberry Pi Zero DIN RAIL Mount Bracket - Staffa installazione Pi Zero su barra DIN 7.5mm Suitable for: DIN RAIL 7.5mm IEC/EN 60715 TH 35 - 7,5 https://www.printables.com/model/885933-desktop-din-rail-stand-7590-degrees-supporto-barra…
I wanted a little mini version of my e450, so made this! With this case you should have more than enough room for a Pi, one or two hats, and a 40mm cooling fan! The grated design on the front and 40mm fan on the rear gives plenty of…
This is a modular case system for the Raspberry Pi 5 and its various HATs. (There is also a prototype Raspberry Pi 4 adapter, in case someone wants to try it…) Comprises a base, a lid and several “spacers”, each one of them with the…
Hyperpixel 4.0 Square Touch with Raspberry Pi5 enclosure (work in progress). (Update: 09/11/25 - I will be back to adjusting this design. Your input is very welcomed) This is the base test enclosure for an upcoming project. There are some…
With this bracket, you can mount the Raspberry Pi Camera Module V3 onto a surface. Initially designed for the Pironman5 case . ------ SunFounder Pironman 5 is an advanced mini PC case designed specifically for the Raspberry Pi 5. It not…
A very "special" Raspberry Pi handheld based off the 5 Inch DSI screen from Waveshare, a Pi 4, joycons and a few other choice bits. It's a chonker, thus the name, but if you happen to find the following parts you can make one too: 5"…
Overview This is a Gridfinity-compatible housing for Raspberry Pi (Raspberry Pi 3 and 4), designed with flexibility and organization in mind. It's a personal project I made for my setup and decided to share in case it’s helpful for others…
This is a work in progress. I have not printed this yet (waiting on filament) This should fit the 10 inch rack with minimal fuss. As the title and summary say, this is a standard 10 inch panel that was remixed to hold a Raspberry Pi 4,…
Daniel BP's Raspbery camera stand is a nice design and now can be used to house the V3 Raspberry Pi camera
Allsky Meteorite Camera Inspired by the Thomas Jacquin concept running on Raspberry Pi. Make use of your ZWO Camera Sensor for full time monitoring of the night sky. Examples of Allsky Images taken through long exposures and to generate…
Optimized for mounting on flat cases or in clusters. Compatible with Raspberry Pi 5 and possibly others, M3 bolts needed to mount lid to case. Designed in SOLIDWORKS, prints with any settings/any filament.
Just a spacer I made to get a little more height out of each 6mm standoff when doing a custom cooler for a Pi 5.
Just a sled, print 2 and make a Pi sandwich. Just don't eat it.
After a year, I finally sat down and modelled the 3rd (and, hopefully, final) version of my vision of an All-in-one electronics case that doesn't compromise on aesthetics and performance. It mounts a Pi4 on the right and an SKR 3 on the…
Basce created for pi-hole In the future I will create and add the upper part of the case
Build a professional protective frame for your Raspberry Pi 5 with integrated 7" Touch Display 2 mounting. This horizontal mounting variant without top-side cutout. Here we offer you the STL files for 3D-printed housing parts,…
Build a professional protective frame for your Raspberry Pi 5 with integrated 7" Touch Display 2 mounting. This horizontal mounting variant with top-side cutout for camera/connector access. Here we offer you the STL files for 3D-printed…
Build a professional protective housing for your Raspberry Pi 5 with IQaudio DigiAMP+ integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
Build a professional protective housing for your Raspberry Pi 4 with IQaudio DigiAMP+ integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 4…
Build a professional protective housing for your Raspberry Pi Compute Module 5 IO Board. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the official Raspberry Pi…
Build a professional protective frame for your Raspberry Pi 5 with integrated 7" Touch Display 2 mounting. This vertical mounting variant without top-side cutout. Here we offer you the STL files for 3D-printed housing parts, specifically…
Build a professional protective housing for your Raspberry Pi 5 with Waveshare Connector & USB 3.0 PCB Adapter. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the…
Build a professional protective housing for your Raspberry Pi 5 with Pineboards HatDrive! PIANO integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the…
Build a professional protective housing for your Raspberry Pi Compute Module 4 IO Board. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the official Raspberry Pi…
Build a professional protective housing for your Raspberry Pi 5 with Pineberry Pi TM1S Top NVMe HAT. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
Build a professional protective housing for your Raspberry Pi 3 Model B/B+. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 3 while protecting it from…
Build a professional protective housing for your Raspberry Pi 4 Model B. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 4 while protecting it from…
Build a professional protective housing for your Raspberry Pi 4 with official PoE HAT. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 4 together with…
Build a professional protective housing for your Raspberry Pi 5. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5 while protecting it from dust and…
Adapters that allow the assembly of external electronics, replacing the original one, using a raspberry, SKR Pico for the MCU and an EBB36 for the Headtool. the porting manages to recover all the functions or at least that is the goal. to…
Build a professional protective housing for your Raspberry Pi 5 with Waveshare 3-Channel Relay HAT integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the…
This 3D-printable case provides protection and optimal ventilation for a Raspberry Pi 5 and the Waveshare PoE M.2 HAT+. Looking for more Raspberry Pi housings? Features: Precise fit for a Raspberry Pi 5 and the Waveshare PoE M.2 HAT+.…
Build a professional protective housing for your Raspberry Pi 4 with Waveshare Connector Adapter. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 4…
Build a professional protective housing for your Raspberry Pi 4 with Waveshare 3-Channel Relay HAT integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the…
This 3D-printed enclosure is designed to house your Pi with a futuristic flair, featuring unique cyberpunk-inspired details that stand out. Choose from a range of vibrant color accents to match your style, or pick up the STL file to print…
I bought a Gardena berry picker but didn't have a Gardena telescopic pole. I did, however, have a paint roller extension pole. So, instead of the adapter for the Gardena system, I printed a different adapter. This one attaches with the…
Give your Raspberry Pi 4 the stunning enclosure it deserves! I designed this case with an organic, generative pattern, not only to be a visually striking piece on any desk but also to maximize airflow and keep your Pi running cool. It's…
This case is for Raspberry Pi 5 with Geekworm X1001 (PCIe to NVMe), Geekworm H505 (active cooler), 2280 disk and NVMe passive cooler (i.e. ThermalrightTR-M.2-2280). Requires 4x M2.5x6 Print Layer height: 0.2mm Infill: rectilinear 10%…
Custom robotics platform i made as part of a final project in a CS course at the Holon Institute of Technology ("software development for human robot interaction"). The platform is compatible with Camera Module 3 and Pi 5 . case not…
Taken from the original model: Case to house the Raspberry Pi 4 + MacArthur HAT combination. It snaps easily on place and can be released without tools. For assembly use the 4 brass M2.5 16mm hex stand-offs included with the MacArthur…
Branches full of berries and birds. Two manual swaps — no AMS or MMU required. Print Settings: Layer height: 0.08 mm with a base layer of 0.16mm Infill: 100% Color Changes: Start with Black (Esun Matte PLA Black) At layer #17 (1.44 mm),…
Build a professional straight camera mount for your Raspberry Pi 4 with Raspberry Pi Global Shutter (GS) or HD Camera support. Here we offer you the STL files for 3D-printed mounting parts, which have been specifically developed to…
Build a professional angled camera mount for your Raspberry Pi 4 with Raspberry Pi Global Shutter (GS) or HD Camera support. Here we offer you the STL files for 3D-printed mounting parts, which have been specifically developed to securely…
Build a professional protective frame for your Raspberry Pi 4 with integrated Waveshare 10.1" 1920x1200 High-Resolution Capacitive Touch Display mounting. This horizontal mounting variant with integrated mounting for high-resolution…
