Liczymy pasujące modele…
Changelog: Intro This is the Breezebuggy, a high performance ride-on outdoor use play car intended for children ~3-9years old. The car has been thoroughly tested and iterated upon to reach a high level of maturity in printing, assembly…
To be paired with my Marshmallow Blaster Modular Breech , I've created a super simple method to attach a 31mmx33mm aluminum tube (Greg barrel) to launch Mega XL at frankly frightening velocities. Simply thread the 33mm_adapter onto to the…
Use a piece of filament for the hinge. The device is working ok for smaller files 720p 1080p h264. I would say max 5gb files. Mild overclock is necesary, libreelec and a light theme for kodi like quartz. Disable all animations etc, hw…
This model improves the air seal on the SMILEY with the brass breech. Despite the name, you do not actually need to use the wider brass piece. It will especially help when using a K25 spring. I have only tested it on the Talon version so…
Inspired by this guide for Meshtastic , this model , and the modifications noted in this guide , I created a mount for attaching a Harbor Breeze solar mesh node to a tree, with provisions for holding a right angle SMA connector and…
Disclaimer : These models are created with the help of AI tools, but always refined with my own ideas, prompt work, and post-processing for printability. I deeply respect traditional 3D designers and their craft, and my goal is simply to…
Designed specifically for budgies, this breeding house combines safety, comfort, and functionality. Its smooth, fully rounded corners ensure your birds can move freely without risk of injury. The floor features small slits that allow…
This is a replacement buckle for BREE backpack. The width of the belt is ~38mm. I figured out that the middle prong is the same as in eastpak buckles. so maybe this will fit on other bags too. print instructions print in PETg/PCTg or…
Třecí deska pro terčovce a skaláry, stačí doplnit o přísavky. Vhodné tisknout na strukturované podložce Breeding plate for discus and angelfish; simply add suction cups. Best printed on a textured build plate
This a variation of my other Harbor Breeze pole mount , but this one uses magnets. You'll need to purchase these 1/4"-20 screw-in magnets as well as some 1/4" heat-set inserts if you don't have any (they come in handy). I recommend…
I needed a way to mount my Harbor Breeze Solar node to the exterior of my apartment as high as possible without drilling into the brick. I decided to make this mount that hooks onto the top of the window. I have also added a small command…
Print in an all-elements ready filament like PETG/ASA/ABS for longevity. Or don't, you do you boo. I remixed a few STLs together to create an ugly step-child that had all the features I needed. Newer Harbor Breeze Solar Lamp panels have a…
Hardware: Mandatory: - RAKwireless Mini Meshtastic Starter Kit US915 RAK19003 (or RAK19001): https://store.rokland.com/products/rakwireless-mini-meshtastic-starter-kit-us915-rak19003-4631-sku-115093 - Harbor Breeze Solar Garden Light:…
This is a back housing that re-uses the gasket, screws, battery terminals, and battery from the Harbor Breeze 60 lumen yard light from Lowes Home Improvement. It's around 10 dollars. comes with a 1500mah 18650. you can use whatever button…
Obviously print with something that will weather well outside (ex: PETG). I used organic supports and they worked well and were easy to remove. May 2026 I added a 4" OD pipe mount. I used zip ties to attach mine, but I think it should…
This is a remix of a great mount for the newer style Harbor Breeze Solar spot light. These relatively inexpensive lights make for great little solar nodes in Meshtastic/Meshcore projects. The original mount was for use with a SMA…
Summary A mount for the Harbor Breeze 1234868 to convert it into a Meshtastic / Meshcore LoRA node. IPEX pigtails for both N and SMA are supported, and should be no shorter than 6in in length. Optional wall plate is included for mounting…
All credits to jphilip. leave your makes, likes and comments on his original model please Except for a 'specific' like for the format change.
Print in PETG!!! So it doesn’t break down in the water. 0.2 mm layer height and 5% infill.
Tired of loud, flimsy portable fans that barely move any air? This project transforms the industry-leading Noctua NF-A20 (200mm) fan into a versatile, silent, and fully portable cooling powerhouse. Whether you’re working on your laptop,…
Update 2024/08/13: Update to all files to now use my Cruller thread profile for printability and QOL. These will have 0 backwards compatibility, so print only v4 options for use together and you'll need v4 for my future expansion parts.…
This model extended the length of the original model and added a lip to better match the fabreeko corner mounts for the top hat of the K3
Model of an Alien Breeding Station printed on Prusa MK04 PLA (translucent recommended) You can use the lab with or without tea lights. Standard tea lights fit everywhere except for the two optional tanks. Smaller ones (20mm diameter) are…
Won't match the metal vanguard breech in performance, but should be a slight improvement over the original printed part, and of course allows for loading in mags when the breech is closed.
A chamber flag / breech clip, based loosely on the "GMK Benelli Breech Clips". I originally bought one of them, but found out that it was way to big to fit into the breech. Designed to fit my 12g Auto-5 (1970s) and Double Auto Twelvette…
Changelog: Intro This is the Breezebuggy, a high performance ride-on outdoor use play car intended for children ~3-9years old. The car has been thoroughly tested and iterated upon to reach a high level of maturity in printing, assembly…
This is a template for a ¾ inch MDF waste board that will mate up with the Fabreeko fixture plate with 6mm holes used on a Milo CNC Mill. You can import the appropriate file into your favorite CAM software to setup the operations and tool…
CAUTION - BIGFEET BREEDING AREA, AVOID EYE CONTACT, DO NOT USE CAMERA FLASH, SIGN CAUTION - BIGFOOT BREEDING AREA, AVOID EYE CONTACT, DO NOT USE CAMERA FLASH, SIGN I added both variations for whatever the preferred plural might be.…
NFStrike Accustrike Mega Darts ("Accufakes") are slightly bigger than standard Nerf Mega Darts and Buzz Bee XL Distance Darts and my Tyrant's breech would chew up and deform them instead of chambering them smoothly. So instead of…
This is going to be the Nerf Fire-er for my auto turret. Couple of mistakes I am too lazy to fix, the center post on the bullet holder needs a horizontal edge filed off it and the firing pad needs to be filed on the side to fit the slide…
Includes 1" hole that is big enough for most apistogramma females to enter and lay eggs. Most males will not be able to enter, and will instead release their milt at the entrance and fan it into the cave with their caudal fin (as they do…
Breech/dart gate for nerf slingfire that uses 16mm OD barrels. Does not require chambered barrels, uses a barrel retention mech somewhat similar to worker breeches.
A model of a TIPX Breech Block I created to mock up various configurations of the BPX Bullpup conversion kit for the Tippmann TIPX Pistol.
There is a distinct lack of mod parts out there for the elite alpha trooper, and so I made my own. These parts can give serious upgrades to your EAT. Notes: * Requires worker's breech/dart gate. If anyone wants to design a new dart gate I…
A box that floats on top using foam insulation you can get at the hardware store. There are no holes in the sides, as you would see in the “pond baskets” normally used in the hobby. I kept ordering baskets from online sellers and getting…
I recommend printing in TPU for the most durable version of this. PLA will crack easily over time but TPU is tough as nails.
A specially designed mount for securely attaching your PC fan remote to the computer case, keeping it easily accessible for controlling fan speed and lighting. Files: [breeze_control_dock.stl] : Standard file for the remote dock.…
Designed this part to replace the original breech spring holder of an Ares G36 airsoft rifle which was solid metal to be able to feed the battery cables inside the stock. Wanted to be able to still use the breech. One picture shows the…
Hanging mount to place you Febreeze Air freshener it the place it is needed most! Clip is 19mm wide and should fit under most lids and/or cabinets Printed in PLA with Supports - 3 walls
Compact storage / display solution for your nice Fabreeko Driver set. Will probably work for other generic sets too. Print standing upright, you shouldn't need supports. Depending on your bed adhesion, a brim may be helpful.
I wanted a nicer way to display the plastic drinking horns from Summer Breeze festival.
Just a quickie drawing to make a little stick-on holder for the light and fan controller for my kids rooms. My little one is too little to reach them when put up near the actual light switch, so this puts it down on her level, now that…
A Valentine's Day twist on mid-century breeze block designs! You can use them on a pendant plate (included with the model), or print out a bunch of breeze blocks to make a patio wall for your mid-century dollhouse! If you make the…
This adapter allows you to use the filter from the Openair KIVPro breezer instead of the original filter for the Tion Lite breezer.
Ok, i'm not gonna lie, i have seen a picture of this somewhere as 2D JPEG and decided - I need to make it IRL ! Simply went to blender and created my own one! Now - i hope that you all will also enjoy it! Im uploading stl file for…
I created this fan remote holder for my Harbor Breeze Remote. This plate goes on a light switch, 2 sizes for the screw holes distance, included. Printed at 40% infill, I used organic supports everywhere with Z-Distance at .3. It came off…
I made a custom fitted part that allows me to dock the X30 series lid and heat deflector onto the Breeo X Series Table. Tested to be compatible with the X30 Lid and the X30 Heat Deflector. Other accessories not tested. Printing I…
A recreation of the battery cover of the Harbor Breeze A25-TX012 remote control. Supports recommended. If you have issues printing the overhangs at the top I may recommend printing with the supports only on the bed plate. Filament: PETG
You don't need a multicolor printer to print a hueforge, follow the directions below: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Add pauses in your slicer at the layers below to swap colors: Swap…
This model is compatible with the lego system.
This is needed to mount the original bracket with the antenna mount to a 32mm commercially made antenna mast. You will need to download both .stl files for a complete bracket. It is sized for #6 screws.
This is a set of blocks that can be used to recreate the Hero Factory Mini - Breez figure released in 2014 at 500% scale. All of the stl files needed to create this have been included in the "stl files" folder below. For those with Bambu…
Hello everyone! This is a 3D printed replacement dart pusher/breech for the Nerf Pro Torrent that allows for magazine swapping without needing to prime the blaster. While you can load and unload a magazine in a stock Torrent without…
To be paired with my Marshmallow Blaster Modular Breech , I've created a super simple method to attach a 31mmx33mm aluminum tube (Greg barrel) to launch Mega XL at frankly frightening velocities. Simply thread the 33mm_adapter onto to the…
An easy way to keep your kit and all your collets/punches organized. Requires 6 M3x40 bolts for assembly.
Use the Harbor Breeze Meshtastic Mounting Arm with almost any antenna! If your antenna does not fit, simply update the Arm.Parametric.f3d file with your measurements and instantly customize it to your needs. Instructions Select the file…
Anybody that's ever deployed in the Army knows what these are, can't get on the plane without it so print some extras for your Battle Buddies. Can also be used on civilian ranges where safety flags are required. Creality K1 Max PETG, or…
This long mount is for the modified Harbor Breeze solar spotlight as seen on hackaday https://hackaday.io/project/194509-harbor-breeze-meshtastic-hack . The modification removes the solar panel from the $9 light and allows it to be…
While looking at designs for solar powered Meshtastic nodes, I came across a few builds using the Harbor Breeze 60LM Solar Flood Light. Since I didn’t need to keep the light, and wanted more flexible mounting options, I designed a…
Modified breechface of the Skeleton Key, with added compatibility for a metric 16mm ID x 2mm cross section O-Ring or my TPU gasket
The relevant model TCL Breeva A2 air purifier is made to stand above the ground. It keeps it away from dust and particles. You should use 3 screw for mounting model or you can prefer fast adhesive.
This is a custom-designed fan blade mount for the Harbor Breeze Boltz III ceiling fan (Item #5497048). If you've lost or broken your original mounts or need a customized solution, this 3D-printable replacement provides a secure fit to the…
(UPDATE) I've added V2 versions of the mount and holster This will help with printing and strength. A Major problem with v1 is the neck of the part is very weak due to the orientation while printing. The V2 version is smaller but a lot…
This is a remix for the pusher and breech of the Smiley blaster, so it now doesn't need any brass for the breech. The only added hardware is 2x -012 o-rings, for the tip of the ram. You DO need to lubricate the o-rings at the tip of the…
This is another iteration of the Meshtastic Harbor Breeze off-grid solar mod. I created this bracket to support an SMA connector. I've also created an N-Type version which can be found here:…
Added a catch notch for smiley on the mag and increased clearance in the breech for better dart fit instead of the really tight one from silly
Pictures show original and new design. Main improvement in screws are spaced out and one is located directly under the main fan buttons to eliminate cantilever action that weakens the screw connection to the drywall. Overall holder is…
Use a piece of filament for the hinge. The device is working ok for smaller files 720p 1080p h264. I would say max 5gb files. Mild overclock is necesary, libreelec and a light theme for kodi like quartz. Disable all animations etc, hw…
Introducing the Blossom Breeze Vase – your new favorite centerpiece that brings the calm and beauty of a spring garden right into your home. This vase, with its soft pastel tones and delicate floral texture, creates a refreshing vibe…
Moddle for Queen breading in MiniPlus Nicot system Printed in PETG needs support
Very basic Breeo Fire Pit Ash Removal Tool. I purchased my Breeo Fire Pit when the company was still in their infancy. The firepit came with an odd ash removal tool and no convenient way to hang it. This is a very simple way to hang it…
Stand for reloading dies in Lee Breech Lock bushings Ständer für Wiederladematritzen in Lee Breech Lock bushings
A remix of a remix to suit a remix? Took Sillybutts brassless breech chamber and extended it to suit flibby404's Talon Mag remix of the Smiley by Mighty Shrub. Prints the same as Sillybutts Brassless Breech and no aditional hardware…
Solar Breeze – Solar Powered Portable Fan Harness the power of the sun with Solar Breeze, a compact, battery-free fan system powered entirely by solar energy. Designed for outdoor use, workshops, or any sunlit space, this project is ideal…
(DE) Mach dir schnell Deinen BREEZY > > Lade die STL-Dateien kostenlos herunter und drucke deinen eigenen Handfächer – SUPERschneller Druck, skalierbar und effektiv. Schnell & Einfach: Mit Deinem 3D-Drucker ist dein Fächer in kürzester…
The Spiral Breeze Vase captures the soft motion of wind in a beautifully twisted form. Its fluid curves gently spiral upward, creating a sense of movement and calm even when standing perfectly still. This vase combines visual elegance…
A stylish layered hand fan with a positive message – perfect for hot summer days or as a fun decorative object. The engraved “HAVE A NICE DAY” adds a cheerful touch and makes it a real eye-catcher. This model is untested – please check…
🌀 Model Description: Meet the TwistAir Pocket Fan – a simple but effective hand-powered fan, perfect for hot days. No batteries, no wires – just spin it with your fingers! Compact and lightweight, this fan fits in any bag or pocket, and…
A mount for the Harbor Breeze Solar Light Meshtastic Node so that you can mount it onto a pole.
The Backbreeze personal fan. This simple personal cooling fan clips onto the back of your shirt on the neck. It blows cool air down your back, keeping you comfy when the weather gets warm, you go for a jog, mow the lawn, or tackle any…
👻 “Breezy Boo” – Classic Halloween Ghost - Vintage Ghost Hueforge Halloween Panel Meet Breezy Boo —a whimsical, vintage-inspired Hueforge Halloween panel by Manic 3D Prints, featuring a classic trick-or-treat ghost with a pumpkin bucket,…
A compact, portable cooling solution that transforms your phone into a personal fan. Yes, you can buy something like that for cheap, but why would you. Maybe you have an old 5V hotend fan already lying around for this little project. Just…
This model improves the air seal on the SMILEY with the brass breech. Despite the name, you do not actually need to use the wider brass piece. It will especially help when using a K25 spring. I have only tested it on the Talon version so…
I have a few packs of the Lowes “ Harbor Breeze 4 -Pack 5 -Lumens Black Solar Integrated LED Path Light Kit ( 3500-K ) ” which is Item #2851250 and the one I'm looking at on the website is Model #QS73P-K5C-BK-4. (If this doesn't match…
à imprimer en TPU n'oubliez pas de poster vos photos de vos prints ça fait toujours plaisir ! Bon print !
This is work in progress. Especially description and instructions will be improved in the next months. Please feel free to contribute Overview: The BreezeShade is a window insert that is designed to work with roller shades that blocks…
Used to turn the Harbor Breeze LED garden light solar panel into a Meshtastic solar powered node. This mounting arm allows you to use the original case without any modification. The antenna is held vertically by the arm no matter what…
Adapter plate for Klarstein New Breeze (10032511) AC and for the New Breeze 9. no support needed. Print with PETG or other high temperature filaments. PLA will maybe melt or get soft because the exhaust air can be up to 50°
Adapter plate for Klarstein New Breeze (10032511) AC and for the New Breeze 9. no support needed. Print with PETG or other high temperature filaments. PLA will maybe melt or get soft because the exhaust air can be up to 50°
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com, but I’ve already done the work of converting them into ready to print STL files, including…
Inspired by this guide for Meshtastic , this model , and the modifications noted in this guide , I created a mount for attaching a Harbor Breeze solar mesh node to a tree, with provisions for holding a right angle SMA connector and…
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Psy Locke Breezy Butterfly Cosplay Katana from Rivals. The supports…
3D model description This adapter can accept a 16mm barrel and is drop in for the Buzzbee Pixelator. *Anodized barrels will have a tighter fit Will require 1 short 4-40 screw. ( the countersunk one commonly used in slug hardware kits) and…
I couldn't find a readily available breech flag for this pistol, and it seemed simpler to make one. The pistol seems decently popular, so throwing the design up here in the hopes that it'll save someone a hot second. Prints in about 30…
