P
Printables3d.e.3d
Logitech Cam Privacy Cover - C922 & C920
you can print it without supports use some 1.75mm filament for the hinges
- Pobrania
- 1159
- Polubienia
- 93
- Ocena
- 4,97
Wyniki wyszukiwania: c922
Liczymy pasujące modele…
P
Printablescodysechelski
Logitech c922 Webcam Cover (Slide to Open)
This is a "Slide-to-open" friction-fit webcam cover for the Logitch c922 webcam. It prints in three pieces and "snaps" together. It does not require any glue or other adhesives. It is also sized so that it does not cover the blue…
- Pobrania
- 828
- Polubienia
- 71
- Ocena
- 4,9
P
PrintablesBrandoBoard
Ender 3 V3 SE Logitech C922 Webcam mount
No special printing directions other than make sure you print it flat side down and support inside the part where it friction fits onto the x axis rail. I printed the CamScrew-10mm.stl screw made by @Vector3dArt to attach the webcam.…
- Pobrania
- 447
- Polubienia
- 50
- Ocena
- 4,83
P
PrintablesMichael Jones
Modified 'Larger slide cover' for Logitech c920/c922
Remix of the ‘Larger slide cover’ by RasmusB, which is based on https://www.printables.com/model/411917-logitech-c922-webcam-cover-slide-to by codysechelski Remix differences from RasmusB's version Removed the gap between the body/button…
- Pobrania
- 438
- Polubienia
- 72
- Ocena
- 5
P
PrintablesLaurensGuijt
Webcam wall mount (logitech C922 Pro)
This is a simple wall mount for any webcam with a 1/4 inch tripod hole. You can use a 1/4 inch screw (I used 11.5mm / around 0.5 inch in length) or print your own. Print the mount verticaly so no supports are needed Print Settings Printer…
- Pobrania
- 406
- Polubienia
- 29
- Ocena
- 5
P
Printableskaerusummer
Logitech C922 Webcam mount for Xiaomi Mi Light Bar
For users who got the Xiaomi Mi Light Bar, and, the Logitech C922 Webcam, this mount could be the best option. This mount can put the webcam directly on the light bar arm. The USB cable of the light bar can be arranged through the mount.…
- Pobrania
- 362
- Polubienia
- 48
- Ocena
- 5
P
PrintablesHack_n_Splice
Logitech C920/C922/C930 Webcam Mic Stand Adapter
This adapter screws onto a microphone stand and holds a Logitech C920, C922, or C930 webcam by snapping the stand portion of the webcam into this adapter. The webcam can then be angled up or down with a much larger range than if it were…
- Pobrania
- 217
- Polubienia
- 45
- Ocena
- 0
P
Printablesrobcov
Ender 3 s1 Logitech C920 C922 C930 Camera Mount
I found the original model to be too long for my liking. I needed to use a custom gcode to move the bed out or move the printer head out of the way which slowed my prints. This version has a shorter bar which allows the camera to be…
- Pobrania
- 183
- Polubienia
- 21
- Ocena
- 5
P
PrintablesJJ
Logitech C920/C922 - M12 / C Mount / 1.25" rework
I've created this reworked C922 case so I could use a C mount to 1.25" telescope adapter with an IR cut filter and use the webcam for planetary and lunar imaging. I've made the distance from the mount to the sensor according to the C…
- Pobrania
- 169
- Polubienia
- 19
- Ocena
- 0
P
Printablesmichael cothern
AD5X USB CAMERA MOUNT (C922)
This is a USB camera mount I made for my Logitech C922. It allows a center view of the print. I imagine it will work well for other similar styled USB cameras. Print with tree supports at 15% infill.
- Pobrania
- 163
- Polubienia
- 37
- Ocena
- 5
P
Printablestryptech
Logitech C920/C922/C930/Brio/Miro Moment-style lens adapter
If you have old smartphone mobile lenses and want to use them to change up or enhance your existing webcam, these clip in place adapters will allow any bayonet-style lens to mount firmly against the webcam. Add barrel distortion,…
- Pobrania
- 149
- Polubienia
- 30
- Ocena
- 0
P
PrintablesFuzzyLotus
Logitech c920 - c922 Webcam Holder/Mount for anycubic i3 mega
Designed this to elevate my webcam so I could see most of the print area.
- Pobrania
- 112
- Polubienia
- 14
- Ocena
- 5
P
Printablesvegetalope
Logitech C920/C922/C930 matte box
This is a custom matte box designed for the Logitech C920/C922/C930 webcam, remixed to include a “hook” that securely attaches the matte box to the webcam. The hook ensures a snug fit without requiring any adhesives or additional support,…
- Pobrania
- 102
- Polubienia
- 12
- Ocena
- 0
P
Printablessamuel-t
Logitech C922 cover
The design is so simple - no explanation needed on how to print this I guess. No moving parts.
- Pobrania
- 96
- Polubienia
- 4
- Ocena
- 5
P
PrintablesL1miter
C922 Webcam mount for Ender 3 S1 Plus
I could not find a good enough webcam mount for either my webcam or the printer I am using so I made my own. it mounts on the right side of the printer head bar. There is also a hole for a screw in the print just if you would need to…
- Pobrania
- 78
- Polubienia
- 9
- Ocena
- 4
P
Printablesl.edlfurtner
Camera Holder, Logitech C922
a small webcam holder where you can put your c922 ( maybe other webcams too? c920? ) and mount it to your wall or in your housing. 0,2mm layerheight PLA, PETG, whatever you like :) Infill 20% 3 Walls Threading M4
- Pobrania
- 72
- Polubienia
- 10
- Ocena
- 0
P
PrintablesThree Nippled Goldfish
Logitech C922 Pro Privacy Shield
Simple to clip over privacy cover for the Logitech C922 Pro webcam. This print covers full screen unlike others that are smaller. I included a cable guide to keep the wires tidy and out of the way. I printed this in PET with 60% infill,…
- Pobrania
- 63
- Polubienia
- 4
- Ocena
- 5
P
PrintablesLaurensGuijt
Webcam mount C920/C922 Anycubic i3 Mega
This is a webcam mount for a anycubic i3 Mega printer. A 0,5 inch / 12.5mm long 1/4 bolt is used to attach te webcam to the mount. The mount is hold in place with two M4 screws. (tapping the holes is adviced) If you found this useful,…
- Pobrania
- 59
- Polubienia
- 6
- Ocena
- 5
P
PrintablesGarrote
Logitech C920/C922 GoPro mount bottom
As the original model author, I was not satisfied with the aesthetics of other mounts. Her model really fits nicely with the curves of the camera, but in my case, I needed the mount from the bottom and not from the back. Print like the…
- Pobrania
- 53
- Polubienia
- 13
- Ocena
- 5
P
PrintablesDad's Friendly Robot Co.
Logitech c922/pro webcam wall mount with 90mm ring light and diffuser
3D printable wall mount for a Logitech c922 webcam and mount for a 90mm ring light (one from amazon with a bendy neck).
- Pobrania
- 42
- Polubienia
- 4
- Ocena
- 0
P
PrintablesGarrote
Ender 3 S1 / S1 PRO X axis C920/C922 Logitech (GoPro support)
No axis disassembly is required. The arm fits nicely on the end of X-axis. UPDATE V2: Vertical version! ( I need to improve light now 😅) Since my printer is sideways in my closet, the v1 was a bit impractical and I kept bumping into it.…
- Pobrania
- 36
- Polubienia
- 6
- Ocena
- 0
P
PrintablesThree Nippled Goldfish
Camera Mount with Cable Guide -Logitech C922 Pro
Camera Mount for 25.4 x 25.4 mm aluminium extrusion with cable guide to keep the cable tidy, protected, and out of the way. This is a good snap fit onto the extrusion. I designed the original for use around the Logitech C922 Pro but it…
- Pobrania
- 25
- Polubienia
- 4
- Ocena
- 5
P
PrintablesRobert Brownell
(MIRRORED) Neptune 4 Logitech C920/C922 mount
My extruder crashes into the original model, so I mirrored it so the bracket holds the camera far enough away from the build zone to avoid said crashing. Nothin' crazy here. Hang the webcam upside down, zip-tie it so it doesn't unfold,…
- Pobrania
- 24
- Polubienia
- 3
- Ocena
- 0
P
Printablesub3rmario
Logitech C922 Webcam Riser/Spacer
This keeps the retention tab of the c922 out of the way so it sits on the border rather than your actual screen space. It also just snaps onto the webcam, reducing the possibility of losing it. This was designed originally for an LG…
- Pobrania
- 24
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSiggy101
Logitech C922 mount remixed with LED
I remixed the excellent Logitech C920 (or C922) mount and added an element from my IKEA HALVKLART LED light bracket so you can now hold the webcam and LED light together, with a little cable tidy for good measure.
- Pobrania
- 23
- Polubienia
- 6
- Ocena
- 0
P
Printablespandel
LED halo ring (75mm) mount for Logitech C920/C922/C930E
This is just a remix to support a flat LED halo ring aka angel eye with a diameter of 75mm. See remix source for further details. The groove for the ring has a width of 4.5mm and a depth of 2.5mm. Print Settings Printer Brand: Anycubic…
- Pobrania
- 20
- Polubienia
- 8
- Ocena
- 0
P
Printablesmista_niku
Wanhao Duplicator 6/Monoprice Maker Ultimate Mount for Logitech C922
For your consideration is a simple mount for a Logitech C922 webcam for Wanhao Duplicator 6 / Monoprice Maker Ultimate printer (for the printer's left side). The mount fits into the top case slots and allows the camera to hang on the side…
- Pobrania
- 17
- Polubienia
- 0
- Ocena
- 0
P
PrintablesL'Atelier Autonome Rouen
Webcam Logitech C922 Pro Holder for Zebra Series 3 NFC printer
This project was created for Rouen Normandy University in France. The Purpose is to use Zebra ZXP Series 3 to write NFC previously printed card after a QRcode check. QRcode is read with a C922 Pro Logitech Camera. The camera is held in…
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMike B
Logitech C922x Cover
This was my quick design of a webcam cover for my Logitech C922x webcam. It certainly doesn't have the most beautiful "form" but it certainly is functional, and is easy to put on and remove. Improve your privacy for just a little bit of…
- Pobrania
- 16
- Polubienia
- 1
- Ocena
- 0
P
Printablescreichert
Ender 3 C270Z/C922X logitech webcam mount
It takes two M3 16mm screws to put it together (though you may be able to use the original C270 pin for the camera mount part) and slides onto the stock ender 3 frame. You only need to print the Stem and Arm (The bracket STL is just an…
- Pobrania
- 14
- Polubienia
- 2
- Ocena
- 0
P
Printables
Ender 3 C270Z/C922X logitech webcam mount
It takes two M3 16mm screws to put it together (though you may be able to use the original C270 pin for the camera mount part) and slides onto the stock ender 3 frame. You only need to print the Stem and Arm (The bracket STL is just an…
P
Printables
Logitech C922 cover
The design is so simple - no explanation needed on how to print this I guess. No moving parts.
P
Printables
Holders for Logitech C922 & Superlux E205U
This models are just extentions for https://www.thingiverse.com/thing:4625988 . Category: Camera
P
Printables
LED-Ring for Logitech C920/C922/C930E Webcam (24 LED Version)
I remixed the design to have a 24-LED Version suitable for, e.g., this Ring: https://www.amazon.de/dp/B07GF2MK54/ref=cm_sw_em_r_mt_dp_U_wwSOEbFNSJ4YP the overall ring diameter is a bit smaller than the original but they fit more LEDs onto…
P
Printables
Logitech C922x monitor spacer
This simply sits under the camera and on top of the monitor, the slight bend of the camera arm will hold it in place, but it doesn't secure to the camera directly. It will lift the camera up enough to clear a thin bezel monitor while…