Liczymy pasujące modele…
🎨Try KOGI LAB for free at kogilab.com ! Print in Place Articulated Flexy Chameleon Hey everyone! A fun 3D printable chameleon that you can place on your desk, shelf, or anywhere you like. Designed as a simple one-piece model, easy to…
If you want to sell my model commercially, please check my patreon website https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare If you do commercial sales with my design without paying the amount,…
Articulated Chameleon with movable eyes!! Interchangeable jaw, with or without a tongue. You choose!! No supports required. Just slice and print!! Check my other articulated designs HERE! Print Settings Printer Brand: Creality Printer:…
It does make noise, you cover the right hole on the chamber and you blow.
Have fun at hiding these funny characters from the steam game mecca chameleon. Powered by: https://makerworld.com/de/makerlab/imageTo3d Category: Other
I remixed a wall mount for Lego Speed Champions sets, as the original design had two separate wall mounts for a single set. I joined two together, ensuring they were the precise width required for accommodating any Lego Speed Champions…
CHAMPIONS LEAGUE https://cults3d.com/en/creations/new Category: Sport & Outdoors
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
This cute chameleon is perfect to give some color to your shelves or just as a decorative piece for any room. We suggest to cut this model in three separate parts and then glue them. This allow you to scale the tail to fit perfectly to…
The original Chamber Temperature Regulator Fan is controlled via GCode - but the fan duct is not present on the P1P (neither is the opening on the back). This duct allows you to use the stock official X1 Fan from the Bambu Lab Store in…
This is a wall mount designed for LEGO F1 Speed Champions sets. The most popular commercially available mount for these sets (which this model was inspired by) requires the use of screws, which is not always an option for renters or if…
Simple jig for PTFE tube cutting (4mm OD), having: 60° (30), 90° (45) and 120° (60) degree chamfer tool (works like pencil sharpener) Length of 13, 15, 19, 35.3, 38.8, 42.3, 43.4, 44.2, 50 and 66mm cutting tool Needed tools: Sharp blade…
This Whistle is built for one purpose: being as loud as possible. Every printed unit is guaranteed to exceed 124 dB , making it one of the loudest whistle designs you can print — well into the range where hearing protection matters. ⚠…
🦎 Cute Articulated Chameleon 🦎 Multicolor & Singlecolor 3mf files and stl file are included! There are two versions of the chameleon: Cute eyes & realistic eyes. Just choose the one you like the most! Model is about 90mm long. It can be…
The model includes three versions with color painting - 5T with ColorMix, and 4/8T version with solid colors. ColorMix version The five-tool version (red chameleon in the sample pictures) takes advantage of Prusa ColorMix, creating new…
2-Chamber High-Decibel Whistle This is a compact, high-performance whistle engineered with four distinct acoustic chambers. It is designed to maximize volume and create an attention-grabbing, multi-tonal sound signature. I added a…
I modeled these characters based on the popular game Meccha Chameleon, some of the poses are my own idea.
I took inspiration from another design that has two parts. However, it didn't align perfectly with my printer. Although it might seem similar, I created this design from the ground up. It's 1 mm shorter in height, 1 mm broader, and has a…
The translucent bins with little removable dividers are HORRIBLE when it comes to keeping parts separated. When closed, parts can jump between bins, which drives me CRAZY. This design intends to fix that. At the top of each wall is an…
This model is a remix from Maple Leaf Makers and the excellent V0 chamber thermistor mount. Just adapted to the 2020 extrusions fitted for the Voron 2.4/Trident . BOM 1x M3x8mm BHCS/SHCS 1x M3 T-Nut 1x 3x15mm thermistor
Say hello to this super cute Chameleon Flexi Toy ! 🦎 This articulated mini reptile features a chunky head, curled tail, and poseable body segments. Perfectly optimized for no-support printing , it's also AMS/MMU-friendly for fun…
NOTE: The images are of the BAMBU STUDIO model. As I do not own any Prusa printer, or know how to use Prusa Slicer properly, I cannot guarantee your prints will look the same as mine if you use the converted Prusa .3mf files. This…
This is a wall-mounting bracket to be used with the smaller F1 Speed Champions Lego sets. It can be printed without supports (big, flat side down) and features a 4mm countersunk hole for attaching. Print pictured used the following…
Comment what animal I should make next!
A simple 9mm chamber flag for chamber flagging purposes. Print bullet tip up with high or 100% infill at least up to the arm since it needs as much plastic as possible so it doesn't compress or get crushed. These were made to be able to…
The agent chamber (from the game valorant) pistol / sheriff / headhunter. Supports recommended This was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this…
Pealess referee whistle with 3 chambers. Sound power level up to 120 dB. The frequency should be 3520 Hz +- 220 Hz. Print with support touching build plate only. (Check your slicer settings) Print Settings Printer: Anycubic I3 Mega Rafts:…
This is a multi-part version of Chamber's Headhunter heavy pistol that I have split into the 3 component colours of the stock appearance: gold, black, and white. Print settings in image 0.15mm layer height (you can get away with 0.2mm)…
This is not an new idea - I just wanted more smooth surface and bigger plus centered hole for the pen. (hole diameter : 10mm) for bigger pens simple scale it up (example:12mm Hole scale up 120%) prints fine without support Thanks goes to…
I wanted to try Rangers of Shadow Deep one weekend so I needed d20 dice. I added a small chamfer to "Deliberately unfair (and fair) d20 dice" by Amatulic ( https://www.thingiverse.com/thing:4853423 ), so it rolls a bit better. Chamfering…
The original throphy is 540 mm tall so is the model, so you'll probably need to scale it down or cut it into pieces. I've uploaded the cutted version, and if you don't have an mmu or an ams unit you can print first the whole thing without…
Hello, this is my first model I have designed and it is a way to hang the LEGO Speed Champions on the Wall removing the clutter from my TV Stand. I designed it using a hole large enough for a screw and to be attached using a drywall…
I took the SAAMI specs and designed a chamber flag that will accurately index in the same place regardless if you use .223/5.56 or .300 Blackout. Because it indexes on the datum line of each cartridge it will always stick out the same…
To display the possibilities of High Gloss PLA - ColorMorph , we designed this chameleon! Check Our Other Designs The Modular Spool Holder :
"The Aegis Of Champions is the ultimate symbol of victory in the epic struggle between Dire and Radiant. Never given, only earned, the shield is hefted by those who best prove themselves in the great tournament." ( dota2.com ) I made two…
This is a simple print that allows you to cover the rear slot in the back of the chamber. This seals the chamber up even more and blocks the air coming from the mainboard chamber. Helpful when you are running the mainboard 80 mm fan mod .…
Chambers sniper from the game valorant This was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. https://www.riotgames.com/en/legal
A double chamber ocarina based on this model file. The only change is that I added in the second thumb hole for the right thumb on the larger of the two chambers. I printed with 100% infill and supports.
print in PETG or PLA. no resin recommendet
I re-mixed the Lego Speed Champions Car Lift model to better accommodate the pre-2020 cars that are 6 studs wide (the newer cars are 8 studs wide and will not work unless you scale up the model.) I also redesigned the floor to reduce…
Another model from my 15-year-old son, this time inspired by hours playing the game Valorant. Quite a lot of experimentation went into the creation of this cosplay prop. The ease of which the parts of the model connect together will…
Meet Chameleon Emil, a captivating 3D model of a playful chameleon just walking on his piece of branch. His bright green textured skin, big eyes and curled tail make him a special piece for collectors and lovers of cute animals.
The stand should fit the majority of the 8 wide speed champ cars. It's just wide enough to fit the McLaren Solus GT on the bottom and the Merc F1 is too long for the top to give you an idea for scale. The tabs on the ‘Car stacker plate’…
This is a keychain version of McGybeer 's Articulated Chameleon. His models are great and I have been printing them for years. He is an excellent creator to support. This keychain only uses 3g of filament and is a great option for your…
Compared to original, it has adjusted scale to 150 mm wide base, letters are set in 0,25 mm deep (first layer) and it has added chamfer 1 mm on the all edges.
A simple chamber flag made for the AR-15. Glue a cut down spent .223 case into the bottom of the chamber flag to make it extract like a real case when pulling the charging handle. Do not insert when hot! Hint: From what I know, this is…
Just a quick remix (of the 38mm version) to be able to print the duct with no (or pretty much no) supports. Print it vertically and the only places where you can add minimal support are insert slots, I printed mine with no supports at all…
These are the files needed to mount the 3DChameleon onto the Creality K1 and K1 Max printers. Also included is the profile for the K1 (K1 Max just needs the distances and build plate size adjusted.) To install: Remove the front left screw…
Lego Speed Champions Stand for post 2020 models. This is a remix of a great model created by RobC. You need to take pillars and other parts from the original model and my remixed platform.…
A nice model to display some Lego cars! No supports needed and can be done in under two hours. For Speed Champions cars a 4x6 plate is attached to the bottom (see photos). I also recommend some glue between the 3d printed part and the…
We're huge fans of the LEGO Speed Champions series over at casadebricks.com With so many great cars, we started to run out of space to display them so built these stand options. Simply print at 20% infill with 4 perimeters and then push…
This is a set of Mk4 upgrade parts for the 3DChameleon Mk2/Mk3 that allow the PTFE tubes to be gripped and held in place without the need for using the brass compression fittings. There are 5 models in this, the A+, B+ and C+ parts (which…
I decided to build this mod for the CFS just to see if it could be done. Like many of you, I received the Space Pi dual roll filament dryer with my K2 Plus preorder. I have multiple other filament dryers, and really no use for another…
A simple print that forms a ramp at the front of your Bambu X1C making it easier to scoop out any stray bits of plastic. Some modifications to original design : Only One part instead of two (rotate it at -45° on bambu plate for print) =>…
Full credit to dkarjadi for his original design which can be found here . What is it? This model is an upgraded chamber light to "assist" the wimpy one that comes with the Bambu X1/X1 Carbon and the P1S. Printed in grey ASA, gaskets in…
Please check back periodically, as I will be regularly adding more panels! As always, I'm open to suggestions. Feel free to drop requests in the comments! And, if you would like to support my work, please visit my Ko-fi ! - RAF = OnShape…
I printed PRIma's pen holder and found that for heavier pens it just fell over. I added a leaf Stabilizer so that this does not happen. I think it turned out very well. Note: This is not technically a remix of the smoothed version of…
Chameleon Hexa, Statue
Do you like interesting car models, especially F1, from the LEGO Speed Champions series? Give them a representative space in the frames on the wall. The available IKEA Sannahed 25 × 25 cm frames are ideal. First, print a test piece on…
May 4th 2022 - Added v2 with a larger area to slide tube out and a hole on the end PTFE tube cutting and chamfer jig for Prusa MK3S+ with E3D Revo Six hotend. MK3S+ - 31mm and 60 degree chamfer MK3S+ - 33mm and 60 degree chamfer E3D did…
Print this as a key rack or just as a piece of wall art, there are files for use with or without the hooks. Inserts can be printed in whatever filaments you choose. Designed to print without support structure. Make sure your slicer does…
These are 45 degree angled mounting platforms to display your 8 stud wide LEGO Speed Champions, the mounting plate hooks into the chassis pieces with 4 studs, I made a modified version for the 1970 Ferrari 512M, see the 4stud file for…
A sleek, minimalist 3D printed display stand for the LEGO® Speed Champions DeLorean. This stand is easy to print and will look great on your shelf! I printed my stand using default print settings with a few modifications. Since the bottom…
Circuit de Spa Francorchamps, Stavelot, Belgium, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed…
UPDATE: I have replaced the files with STEP so it's easier to remix as QIDI changed up the mounting locations and i don't have acces to this data. Attempt this fix at your own discretion! Only work on the heater with the power off and the…
This insert is designed to fit the revised version of the Lord of the Rings LCG core set. This also fits the “Saga” expansion boxes as well for the LOTR LCG, since the boxes are the same exact size. I included the files required to print…
This is a segmented chameleon keychain, created from an svg file found at flaticons.com. Icon made by Freepik from www.flaticon.com. The gaps turned out a bit too big for my taste. I may go back and make them smaller and add more segments.
This is a remix with the universal hooks for the Ikea Skadis pegboards.
Somewhat faithful replica of the RS-25 main combustion chamber (Space Shuttle's engine). It was designed for conventional machining, but should print ok too especially if done in resin. The threads are #0-80 so likely won't print well on…
Every Liverpool fan knows what the Champions Wall is, now you can have your own Champions Wall at home. I included all numbers, so you can keep it up to date. ;) Please let me know, if you would like me to add or change anything.…
Chamber clear flag for AR-15 modelled after .223 Remington/5.56 Nato round specifications.
Welcome to CHAMv3! I am extremely humbled by the amount of people who have downloaded CHAMv3 and posted their makes! I owe any success to you all, and I hope the CHAMELEON project makes custom arcade sticks more accessible for everybody!…
V0 Chamber Thermistor Mount A mount for a standard 3x15mm cartridge thermistor on 1515 T-Slot Extrusion Designed for the Voron V0 BOM 1x M3x8mm BHCS 1x M3 Nut 1x 3x15mm thermistor The most up-to-date version of this mod can always be…
Updates: After printing mine, I realized my 6mm x 2mm magnets were too weak. The heater is held to the wall but uses the power cord to stay up, added a 10mm and 8mm magnet version Added a clearance hole for the heater button Added a 2mm…
Latest Update: 10.07.2023 - Issue with the mounting location of the AMS filament buffer: In the previous files, the recess for the filament buffer did not align properly with the printer's frame. This caused the backplate to bend and…
I made three of these trophies for a chili eating contest and decided to also upload them here. I borrowed the chili champion statue from the Chili champ trophy from Thingiverse. Manufacturing instructions I printed the chili champ figure…
This is a fix to a problem you didn't realize you had! *****PLEASE READ THE FOLLOWING BELOW. THIS GOES INTO FURTHER DETAIL AS TO WHY THIS PART IS IMPORTANT/USEFUL***** The K1 Series printers chamber thermistor is in a direct path to where…
Deutsch: Ständer für die LEGO® Speed Champions F1 Reihe. Mit F1-Logo und Klemmbaustein-Einsatz für die Figuren. Kein Kleber oder zusätzliches Material nötig – einfach drucken und verwenden. Viel Spaß beim Drucken! English: Stand for the…
1:42 Scale French tank from WW1, this is the early production variant. I won't be making the late version. It's just one solid piece, no moving details, no assembly required. Needs supports. Goes well my Mark V Landship. This time the…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
I absolutely LOVE the box design from @Jamie and really wanted a version with all small compartments of the same size. So I made it in TinkerCAD real quick. I've also included the 3 pieces in separate files, as well as a file with all 3…
ce petit personnage POD est un modèle d'impression sur place articulé qui ne nécessite AUCUN support. C'est un design assez génial que j'ai crée et qui fonctionne très bien tout en étant fiable et solide. Il a l'air super et est très…
Remix of the awesome ARC enclosure. This enclosure will be 100% printable. Uses the OEM door and top glass, and hinges that can be purchased from Bambu. Includes side panels, Rear chamber fan with temperature control and many more smaller…
Base ramp insert for easy filament debris removal, one piece design. Can be printed in one piece on the bed of X1C, P1P and P1S. Designed for optimal fit and easy install. Best in PETG for temperature resistance, added print profiles to…
This is just the WWE heavyweight Championship belt. i printed it on my anycubic neo with pla. enlarged it to 105%
Simple Mod to mount a temperature sensor to the gantry
Hello, this is my second model I have designed and it is a way to hang the LEGO Speed Champions on the Wall removing the clutter from my TV Stand and displaying the iconic LEGO Minifigure for each set. I designed it using a hole large…
This is ECI mag block for a Ruger 10/22. Keeps the bolt from closing.
Modular display stand for Lego Speed Champions, parameterized for more customization including a parameter for the tolerance for a good fit no matter how (in)accurate your 3D printer is. The attached STL files worked on my printer. I…
Remix of the car lift designed by GigaPenguin. Parts required Base x1 Second Floor x1 Pillar x4 Lock x4 Pillar Cap x4 Infill 20% Material PLA Resolution 0.2mm
The tolerances are slightly tight. The tolerances on my printer allow it to be easily slid into place but it can be slightly difficult to remove if pulling at an angle. You can use command strips or screws with these shelves in order to…
..:: РУССКИЙ ::.. Приспособление для снятия фаски в ГВЛ (Гипсокартон) для углубления подрозетников. Для использования необходимо прикрутить два трапецевидных лезвия с отверстиями:…
Remixed from Daan Kleinen's version 2 mounts I have made a smaller one for the older Lego Speed Champions. I have left the mounting holes within them so you can still screw them to the wall. I just Used command strips and seams to work…
Alternative tokens to replace the Stunned, Confused, and Tough mini cards used in Marvel Champions LCG. The modes incorporate superhero silhouettes into the design. Token size: 21mm x 21mm x 3mm I printed with a 0.25 nozzle @0.15 layer…
Hand-held ouside chamfer cutter for plastic pipes up to 63mm
I wanted to display my Lego Speed Champions on the wall using double sided tape. Therefore i made a remix on the 2 projects and looks well :) Be sure to use strong tape or else you will need to rebuild some models ;). Also added a variant…
![LEGO Speed Champions Modular Display Stand [last update 21.07.2024]](https://media.printables.com/media/prints/532084/images/6044190_522b121d-3533-45b1-9d14-b2a10072eb0b_b8c2e7a3-f852-4a50-bf7b-1311d4b55232/sc-2024-3-2.jpg)
