P
PrintablesNIRACreationz
Stormtrooper controller stand
An controller stand for Xbox one/series x/s and PS5 controllers. The stand is based on a stormtrooper from starwars
- Pobrania
- 2693
- Polubienia
- 443
- Ocena
- 4,94
Wyniki wyszukiwania: controlle
6037 modeli
P
Printablesthrasher
Xbox Controller Stand w/AA Battery Storage
About The Minimalistic Xbox Controller Stand by @agepbiz is quite nice. It offers a nice positive placement feel of the controller into the stand. It's also super minimalistic and perfect for modification. I was able to add slots for six…
- Pobrania
- 2326
- Polubienia
- 378
- Ocena
- 4,88
P
PrintablesVlastimil
PS5 controller and headphones holder
This is a simple wall mount for a PS5 official controller and headphones. Just print everything out of PETG (I used Prusament PETG) and glue it together with superglue. To fix it on a wall, use Mamut Glue or similar one-component glue.…
- Pobrania
- 1899
- Polubienia
- 212
- Ocena
- 4,91
P
PrintablesKabliga
PS5 Controller Stand with PS logo
Very simple yet good looking PS5 controller stand. This stand is a perfect fit due to using a 3d scan of the controller. Minimal size with no supports or brims needed for easy print.
- Pobrania
- 1809
- Polubienia
- 175
- Ocena
- 5
P
PrintablesJaatinen
Mini Controller Toy / Fidget Gadget
I needed a toy for my son for when I'm playing on my PS5 so he can “join”, without endangering my real controllers, so I designed this easily printable little controller toy. Just look at this happy customer: Attention and disclaimer: If…
- Pobrania
- 1721
- Polubienia
- 311
- Ocena
- 4,33
P
PrintablesBengyboo
Quest 3 Touch Controller Wall Mount
I wanted a wall mount that would hold the Quest 3's controllers without risk of them slipping out or getting damaged. Settings used: Layer Height = 0.20mm Walls = 3 Infill = 20% Supports = On Brim = On Small amount of support required for…
- Pobrania
- 1670
- Polubienia
- 237
- Ocena
- 4,94
P
PrintablesVladTheInhaler
MiniCaster-- Mini Clone Hero/MIDI Controller
After building /u/GermanDarkness 's Remix of /u/isrussell 's model I had a ton of new ideas to implement! I rebuilt pretty much everything but still used his strum bar and face buttons in this iteration. The end product is primarily made…
- Pobrania
- 1495
- Polubienia
- 265
- Ocena
- 5
P
Printables4D
Minimalistic Nintendo Switch Pro Controller Stand - non-slip design
Manabun design is very accurate. I made quick remix for non-slip pads that I have at home. Dimensions 18 x 5 mm. Pads are very tight in holes. Print with 3 perimeters and 15 % lightning infill.
- Pobrania
- 1462
- Polubienia
- 116
- Ocena
- 5
P
Printables3P62 The 3D printer
Minimalistic PS4 controller stand
I used a 3D scan of the PS4 dual shock controller and used it to create part of a negative mold to better fit the controller on the stand. here is a stand for single controller and one for 2 controllers. When printing rotate the model so…
- Pobrania
- 1459
- Polubienia
- 118
- Ocena
- 5
P
PrintablesAleš Stárek
Holder for Meta Quest 3 VR glasses including controllers
Print, fold and enjoy :-)
- Pobrania
- 1139
- Polubienia
- 151
- Ocena
- 5
P
PrintablesTrajan
Honeycomb Wall PS5 DualSense and DualSense Edge Controller Mount (works for both)
This is a quick a dirty version of the Honeycomb Wall PS5 Controller Mount. Got a hold of a Dualsense Edge controller and wanted to make a new mount that would allow owners of these controllers to still use the Honeycomb wall. Works with…
- Pobrania
- 1083
- Polubienia
- 132
- Ocena
- 4,86
P
PrintablesMKREJ
A working elevator model controlled by the Arduino system
Students will design a functional elevator model controlled by the Arduino system that will transport material (cylinder) to the given floors in the warehouse.
- Pobrania
- 951
- Polubienia
- 152
- Ocena
- 5
P
PrintablesRvdk
Nintendo Switch - Controller / joycon stand
Switch controller / joycon holder Designed by R_vdk Application / Functions I needed a simple storage system for the extra items I had witch my Switch. The model provides storage for the add-on pieces when using the joycons separately, as…
- Pobrania
- 749
- Polubienia
- 142
- Ocena
- 5
P
PrintablesAntro
XBOX controller Thumbstick
Thumbstick replacement Probably will work with other XBOX pads too I recommend to: use 0.25mm nozzle (to better reproduce the texture) or print with resin Update: additional champfered version requested by @ntnt
- Pobrania
- 629
- Polubienia
- 124
- Ocena
- 5
P
PrintablesZANXL
Fpv Drone piloting sticks for ps5 controller
Hello friends, This is a 3d print for everyone getting in to the fpv hobby on a budget if you have the ps5 controller ofc. it prints very fast and makes your accuracy a million times better. i suggest printing it at 19.5 mm for x/y
- Pobrania
- 571
- Polubienia
- 42
- Ocena
- 3
P
PrintablesCustomiz3D4U (C3D4U)
PS5 Controller and Headphones Stand
Organize your headphones, controller and charging cables with this unique stand featuring a built-in drawer for a clutter-free experience. Make sure to check out my matching stand for PS5 games:…
- Pobrania
- 501
- Polubienia
- 81
- Ocena
- 0
P
PrintablesMini
Meta Quest 3 Knuckles - Controller Grip Strap
After searching for a knuckle strap for the Quest 3 controllers I couldn't find any to buy or print which i liked. So i decided to modify the model of SSpt to get a feeling like with the strap on the Valve Index Knuckle controllers which…
- Pobrania
- 380
- Polubienia
- 87
- Ocena
- 5
P
PrintablesBonBon
Arturia Midi Controller Knobs
Hi! These knobs were made to fit Arturia's Keylab88 and MiniLab mk II. I made them after I lost one of the knobs to my Minilab. I suspect they may fit their other products. If you have a different brand of controller look at the 3Dmodels.…
- Pobrania
- 372
- Polubienia
- 20
- Ocena
- 5
P
PrintablesAinon3Dtisk
Stand for Playstation 4, PS4 controller
Hello, Welcome to my profile, full of models and miniatures :-) I have a Playstation 4, PS4 controller stand for you. The controller fits beautifully into it and is an ornament to any collection of games and video games. The material I…
- Pobrania
- 370
- Polubienia
- 23
- Ocena
- 5
P
PrintablesFireDragon3D
Video Game Controller Christmas tree ornament
You will definitely be on Santa's "nice" list with this Christmas tree ornament. A unique gift for the gamer in your life, whether it's for your significant other, a child, or an entire household of gamers, this ornament is sure to be a…
- Pobrania
- 332
- Polubienia
- 78
- Ocena
- 5
P
PrintablesActualPepperoni
Xbox One Controller Holder
I like my controller to be stored out of sight, but still reachable from my chair. I recently discovered a model that would hang the controller by the joysticks. However, there is speculation that this will induce drift into the sticks…
- Pobrania
- 330
- Polubienia
- 55
- Ocena
- 4,5
P
PrintablesSebastian
Useless box (Arduino controlled)
A useless box that uses a single moving arm to press multiple switches. Partslist and build instructions: https://blog.hirnschall.net/diy-useless-box/ Video of the box in action: Print using a medium quality preset (0.2mm layer height).…
- Pobrania
- 325
- Polubienia
- 128
- Ocena
- 5
P
Printablespstimpel
Servo arm for Rancher 4x4, radio controlled, STLs by 3dsets.com
This file is a more rigid servo arm for the Rancher. The Rancher itself is NOT part of this assembly! If you want to print the Rancher, you will need files from third party as well. Files can be found at 3dsets.com. The Rancher has 4x4…
- Pobrania
- 294
- Polubienia
- 22
- Ocena
- 5
P
PrintablesMichael
Akai Professional Fire Stand (a stand for the FL Studio hardware midi controller by Akai)
Akai Professional Fire Stand (a snap on stand for the FL Studio hardware controller by Akai). Connect one side of the stand (Front or rear) to the Fire and then lightly pull and snap the opposite side into place. Originally printed using…
- Pobrania
- 270
- Polubienia
- 33
- Ocena
- 5
P
Printablesgabr42
Box for a STC-1000 temperature controller
STC-1000 is a nice little temperature controller that can be used to control both a heater and a ventilation in an enclosure. 12V and 220V versions are available for 10-15 EUR (Amazon) or $3-5 (AliExpress). This box is designed to be…
- Pobrania
- 206
- Polubienia
- 17
- Ocena
- 5
P
PrintablesFrancesco Pini
Quest 3 controller support
wall mount for quest 3 controller
- Pobrania
- 174
- Polubienia
- 19
- Ocena
- 0
P
PrintablesMehTechArt
Controller holder for Qube 540 Case
Please click if you appreciate my work :) A holder designed specifically for mounting on the Qube 540 PC case, allowing you to conveniently keep your gamepad within easy reach. 🔩 Design The model consists of two parts that fit together –…
- Pobrania
- 159
- Polubienia
- 52
- Ocena
- 0
P
PrintablesTuna Celik
PS5 device top controller stand
I've created this ps5 controller stand because I wanted to place my ps5 controller at the top of the console when I'm not playing with it. It is a simple and target-oriented design. It consists of two parts. One is the bottom part which…
- Pobrania
- 151
- Polubienia
- 19
- Ocena
- 5
P
PrintablesTony Currie
PowerA Nintendo Switch Controller Stand Remix
Double PowerA Nintendo Switch controller stand
- Pobrania
- 149
- Polubienia
- 16
- Ocena
- 5
P
Printablesdaroz
Motor Controller Mount for SDS MK4 Swerve Drive (FRC)
Primarily for use in FIRST® Robotics Competition robots that use the Swerve Drive Specialities MK4 Swerve Module , this is an integrated motor controller and CAN bus connecter mount. Designed for FRC team 5881, the Tech Valley High School…
- Pobrania
- 119
- Polubienia
- 11
- Ocena
- 0
P
Printablesballes
EasySMX X20 Controller + Receiver Stand
A stand for the easysmx x20 controller and its receiver. Basically like the original . I just added a cutout in the back of the stand to safely store the receiver of the controller, when not in use. I printed mine on a CoreOne. The sides…
- Pobrania
- 112
- Polubienia
- 10
- Ocena
- 5
P
PrintablesJulia Auer
Switch Pro Controller Stand - Animal Crossing remix
After remixing the pro controller holder for the first time with a Zelda - Tears of the Kingdom look (find this one here: https://www.printables.com/de/model/826335-nintendo-switch-pro-controller-stand-zelda-totk-re) I decided to do some…
- Pobrania
- 112
- Polubienia
- 30
- Ocena
- 5
P
PrintablesKevin Müller
DJ Mixxer Controller
It is a keychain for DJ or others
- Pobrania
- 109
- Polubienia
- 14
- Ocena
- 5
P
PrintablesGabbox3D
Customizable Xbox One Controller Stand with your NAME
It is a very easy print! In the gcode above I have used a 0.6mm nozzle and 0.4mm for layer. I advice you to print at 0.3mm if you use the 0.4mm nozzle. I have used just 5% infill on it.
- Pobrania
- 108
- Polubienia
- 12
- Ocena
- 0
P
PrintablesSquareBallz
Zakk Wylde Clone Hero Controller Remix
Remixed the body into a Zakk Wylde style body. Each part of the body needs to be printed with accent+main on the same buildplate. I used this tutorial to do the trick: https://reprap.org/wiki/Multicolour_printing_with_one_hotend Good luck!
- Pobrania
- 92
- Polubienia
- 30
- Ocena
- 5
P
PrintablesGerryPB
Sewing Motor Controller Aid
I will present this as a Sewing Machine “Game” Controller Aid, :) as a contest entry. The reason for calling it a game controller is because when I was a kid there where no Electronic games. My grandmother came up with an idea to…
- Pobrania
- 89
- Polubienia
- 40
- Ocena
- 4
P
PrintablesDokkie
DC PWM motor controller case lid
Small remix of a nice model for a PWM motor controller. The capacitator is a littlebit bigger for the case so I edited it a bit. Print settings Nothing special, I printed with 0,2 mm layer hight, should be fine with 0, 35 mm. Printed with…
- Pobrania
- 87
- Polubienia
- 12
- Ocena
- 5
P
PrintablesErez Ardel
Waterproof 10 - 60A PWM Solar Charge Controller wall mount
Waterproof wall mount for a specific PWM Solar Charger Controller. The waterproofing is achieved by adding a cover that goes in front and behind the controller, with an angle for the water to slide on top of the cover This design might…
- Pobrania
- 76
- Polubienia
- 5
- Ocena
- 0
P
PrintablesDen Bikkie
nintendo switch procontroller grips
grips for the nintendoswitch procontroller, 3D scanned and smoothend
- Pobrania
- 69
- Polubienia
- 16
- Ocena
- 0
P
PrintablesEl1t3Mult1pl3x0r
Mechanism Steam Controller Dock with Magnets
Remix of the Steam Controller Dock from Mechanism. Added 5 spaces in the bottom for inserting magnets (10mm diameter, 3mm thickness).
- Pobrania
- 61
- Polubienia
- 11
- Ocena
- 0
P
PrintablesLibor Martinec
Minimalistic-xbox-controller-stand-AssassinsCreed
Kombinace s logem
- Pobrania
- 61
- Polubienia
- 14
- Ocena
- 0
P
PrintablesBM
fpv sticks for Nintendo Switch controller
With these extensions, you are able to use the switch controllers in PC FPV/drone simulators (like LiftOff). This increases the precision of the movements. In addition, a small part named shifter rises the right hand side controller to…
- Pobrania
- 55
- Polubienia
- 7
- Ocena
- 0
P
PrintablesAwooolf
Brake Controller Mount (Fits a Prodigy P2 to a Toyota Tacoma 3rd Gen)
Designed for a 2022 Toyota Tacoma, not sure if it'll fit on any older models. Mounting bracket securely pops into the screw holes on the top of the metal mount that comes standard with the Prodigy P2, enabling easy removal and replacement…
- Pobrania
- 52
- Polubienia
- 2
- Ocena
- 0
P
Printableskornon
Case for 12V PWM Fan controller (ZFC39) remix
There is a good explanation of this controller at:
- Pobrania
- 50
- Polubienia
- 7
- Ocena
- 0
P
PrintablesKOTA CAD
Simple Xbox Controller Stand
This simply holds your controller and takes up very little space. It is very different from most stands. It will hold your controller via the type c connector. I have made a stronger version which I strongly recommend you use. I haven't…
- Pobrania
- 50
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMal
Xbox Series X/S Controller Light Cover Creality Logo
“When using a wireless battery pack, you can plug this into the USB C port on the controller to block the bright LED light when playing in the dark. On my controller, I still get a very dim halo showing under the controller's plastic so I…
- Pobrania
- 43
- Polubienia
- 3
- Ocena
- 0
P
PrintablesTfaz
Matek 743-WLITE Flight Controller Mount for HeeWing T1 Ranger
This is a multi-part remix with new additions of other FC Mounts. This should fit into the HeeWing Ranger T1 Nicely and mount the buzzer/USB board nicely behind the FC. I am still wanting to test fit with the PDB and will do that soon, i…
- Pobrania
- 38
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMilan98
Stojánek na ovladače - Stand for the controllers
Kresleno v PTC
- Pobrania
- 38
- Polubienia
- 4
- Ocena
- 0
P
PrintablesFierybattlehawk
Playstation Move Controller Strap Mount
A mount for Playstation Move controllers to put them on your body for VR tracking. Intended for PSMoveService + KinectToVR/Amethyst , to bring the hardware to SteamVR. However I heavily recommend using Externet 's fork, PSMoveService Ex…
- Pobrania
- 35
- Polubienia
- 4
- Ocena
- 0
P
PrintablesTecknishen
WLED Controlled Accent Light
This lamp runs entirely on 5v from the ESP32. So, it only needs a single USB cable to power the build. I think you should be able to get away with not using a separate power supply due to the relatively small number of LEDs. It's possible…
- Pobrania
- 33
- Polubienia
- 4
- Ocena
- 0
P
PrintablesHawkeye
Losmandy Gemini II hand controller cradle (for Berlebach planet tripod)
This is a cradle of the Losmandy Gemini II hand controller for the Berlebach planet tripod.
- Pobrania
- 31
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDanAndersen
Touch-Prevention for TC420 TC421 LED Time Controller (Fishtank Aquarium Light Control)
The TC420 and TC421 are very nice and relatively cheap LED controllers for fish tank / aquarium lights. However, there is no cover at the connections, so I created a two-piece cover. The lower part will be screwed in permanently. The…
- Pobrania
- 30
- Polubienia
- 4
- Ocena
- 0
P
Printables3DHippo
Joystick Cap for Alpakka controller
Check out the Alpakka controller, its a really nice project, and it works like charm, since I built mine, this is the only controller I am using for PC gaming. I made the joystick cap out of TPU and gave it a fuzzy skin in the slicer…
- Pobrania
- 27
- Polubienia
- 11
- Ocena
- 0
P
PrintablesMeaargee
Nexstar Hand Controller LCD replacement housing
This is a 'snap in' housing for a replacement LCD on a Clestron Nexstar Telescope hand controller. This description should appear on Mike Swanson's Nexstar website soon. https://www.nexstarsite.com/NUG.htm I cannot support the design over…
- Pobrania
- 26
- Polubienia
- 1
- Ocena
- 0
P
PrintablesNiH
Wheelhub for Dualsense controller
Experimenting with using a PS5 Dualsense controller as a steeringwheel for driving-games. Model uses my snapon mount for the controller, you might need to add something between controller and mount to add extra friction so that the…
- Pobrania
- 25
- Polubienia
- 10
- Ocena
- 0
P
PrintablesWendi
Enclosure for EC Buying YR-1001 12v dc fan controller board
This is a 3 piece model for the EC Buying YR1001 Fan control board. Available thru Amazon, AliExpress, Alibaba, etc for just a few dollars. I used PETG, you can print it without supports but the faceplate will turn out slightly better if…
- Pobrania
- 18
- Polubienia
- 0
- Ocena
- 0
P
PrintablesGary
Microcontroller Development Board Expansion Adapter Standoff
A holder to support an expansion adaptor for developing designs for microcontrollers. This stand keeps the expansion adaptor from scratching the work surface and pins from shorting to each other. Fits boards that are 70X90 mm such as:…
- Pobrania
- 14
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJames Kirk
Mount for LED-Controller on Zeiss Microscope
If you use modern LED ring lights on a microscope there is the control unit. With this base plate you can mount the photonic LED controller on a Zeiss Microscope with cable ties. The connectors on the backside are supported too and also…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesStefanie Kloibhofer
Drehknopf für Hercules Controller Adventkranz
Drehknopf für Hercules Pult in weihnachtlichen Stil. Knob for hercules controller (x-mas look)
- Pobrania
- 11
- Polubienia
- 8
- Ocena
- 5
P
PrintablesHawkeye
Losmandy Gemini II hand controller cradle (for Berlebach uni tripod)
This is a cradle of the Losmandy Gemini II hand controller for the Berlebach uni tripod.
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPlatonicsolid
Brickmaster Relay Controller
An MQTT-based, Home Assistant integrated GPIO control system for controlling legos. The Brickmaster RC supports one or two relays for 9v output, good for driving Lego motors or using as a replacement for a battery box. Can be used with my…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesHawkeye
Losmandy Gemini controller holders
These are Losmandy Gemini controller holders for non-Losmandy mounts or tripods.
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
Printablesagepbiz
Minimalistic Xbox Controller Stand
Simple and clean looking Xbox Controller Stand fits 8x3mm anti slip rubber pads (optional) Commercial license Do you want to sell prints of this model? You can purchase commercial licensing for this model by joining the Commercial license…
- Pobrania
- 65 398
- Polubienia
- 13 911
- Ocena
- 4,97
P
PrintablesSemmel
Joycon Controller with Trigger buttons. Easy print
Hi everyone, the Controller is designed to be printed standing up without supports. There is a bit of postprocessing required to remove the custom supports for the Trigger button flexure. Enjoy printing
- Pobrania
- 34 051
- Polubienia
- 11 578
- Ocena
- 4,9
P
PrintablesIn3DSpace
Xbox Controller Stand
Stand for your Xbox controllers. Available with and without the Xbox logo. MMU2S version has the logo embedded in the STL. Use the split to parts button in PrusaSlicer to separate or load the 3MF file. Can be printed in the orientation…
- Pobrania
- 13 119
- Polubienia
- 1737
- Ocena
- 4,96
P
PrintablesLucas Romero
Xbox Invisible Stand / Holder Controller ORIGINAL
The best Xbox controller stand is minimal and nearly invisible — keeping the focus on your controller, not the stand (🇦🇷 Designed in Argentina by @impuestito_org ) – THIS IS THE ORIGINAL DESIGN ✅ Minimal design. No supports needed. Weighs…
- Pobrania
- 12 622
- Polubienia
- 2283
- Ocena
- 4,96
P
PrintablesYellowtech
Stealth Xbox Controller Stand
Xbox Stealth Controller Stand that displays your controller as if they are floating on your desk. The stand is sturdy and tries to stay hidden behind the controller itself. Printed with tree supports, brim, and 20% infill on an Ender 3 in…
- Pobrania
- 12 037
- Polubienia
- 3035
- Ocena
- 4,9
P
PrintablesGrandpa 3DPrints
Dual PS5 Controller Stand No Supports
I've tested this design with PS5 controllers, but it should work with many different controllers. If your console controllers fit, please let me know what you have so that I may update the model listing. 😃 This model prints on its side…
- Pobrania
- 11 121
- Polubienia
- 1330
- Ocena
- 4,98
P
PrintablesKabliga
PS5 controller scan
Simple scan of a ps5 controller I took so I could model some stuff. Thought others might find it useful.
- Pobrania
- 10 865
- Polubienia
- 240
- Ocena
- 4,67
P
PrintablesYellowtech
Stealth PS5 Controller Stand
PS5 Stealth Controller Stand that displays your controller as if they are floating on your desk. The stand is sturdy and tries to stay hidden behind the controller itself. Printed with tree supports, brim, and 20% infill on an Ender 3 in…
- Pobrania
- 9338
- Polubienia
- 1365
- Ocena
- 4,91
P
PrintablesD-man5005
Xbox One Controller Battery Cover (Customizable)
*The file was exported in inches. If it shows up tiny in your slicer, scale it up 25.4x I bought two used xbox controllers that didn't have the battery covers on them, and none of the designs I found online fit very well, so I went ahead…
- Pobrania
- 9110
- Polubienia
- 388
- Ocena
- 4,95
P
Printablesserdaracikyol
Xbox Controller Dual Stand
Designed for Xbox Series X and S Controllers. I think it's compatible other Xbox controllers except those that use a battery pack. Note: The Xbox logo may require sanding to get it in place. Or you can paint the logo hole.
- Pobrania
- 8769
- Polubienia
- 711
- Ocena
- 4,94
P
PrintablesHazzardness
PlayStation PS5 Dualsense Minimalist Controller Stand
Inspired by agepbiz's Xbox Minimalist Controller Stand(https://www.printables.com/model/449970-minimalistic-xbox-controller-stand), and not being able to find one for the PS5, I decided to learn some new skills and create my own. I have…
- Pobrania
- 8493
- Polubienia
- 1154
- Ocena
- 4,83
P
PrintablesChewey
Oculus Quest 2 VR pistol grip - Fits Quest 3 controllers
IMPORTANT: This is just a model shell grip for a VR controller. NOTE: This is for the Oculus Quest 2/3 controllers. If you are looking for the Quest 1 version, see here . NOTE2: This will fit a Quest 3 controller, but it may be slightly…
- Pobrania
- 8334
- Polubienia
- 1355
- Ocena
- 4,72
P
PrintablesMake by L.
Xbox controller stand
Stable stand for Microsoft Xbox One/Series controller.
- Pobrania
- 8185
- Polubienia
- 1006
- Ocena
- 4,93
P
PrintablesManabun Lab
Minimalistic Nintendo Switch Pro Controller Stand
I remixed agepbiz’s XBOX Controller Stand because it was amazing, while respecting the design to make it suitable for a Nintendo Switch Pro Controller. The remix source is here.…
- Pobrania
- 7796
- Polubienia
- 1439
- Ocena
- 4,92
P
PrintablesConrad Jun
PS5 Dualsense Controller Stand V2
I redesigned the v2 version to be more rounded and sleek. Product Introduction: Hello everyone! I'm excited to share with you my 3D printed stand design for the PS5 controller. This stand is perfect for storing and displaying your PS5…
- Pobrania
- 7385
- Polubienia
- 613
- Ocena
- 4,98
P
Printablespixel2
Xbox One controller mini wheel
Rack and pinion steering for your xbox controller. 100 degrees of rotation. Enjoy finer control in racing games. Get the remastered version: https://www.printables.com/model/271330-xbox-one-mini-wheel-evolution What you need: 608 bearing,…
- Pobrania
- 7064
- Polubienia
- 750
- Ocena
- 4,67
P
PrintablesGuillermo Wismann
Controller and headset holder
A 3D stand divided into two parts: the base and the tower. Specifically designed for controllers and headphones, the tower features arms with adjustable angles at 45, 66, and 90 degrees. This allows you to customize the stand for placing…
- Pobrania
- 6883
- Polubienia
- 937
- Ocena
- 4,63
P
PrintablesOctaNik
PS5 Controller Stand
PS5 Dualsense Controller Stand
- Pobrania
- 6754
- Polubienia
- 843
- Ocena
- 4,97
P
Printablespixel2
PlayStation 5 controller mini wheel
Rack and pinion steering for your PS5 controller. 100 degrees of rotation. Get finer control in racing games. What you need: 608 bearing, 22mm diameter, 7mm thick, 8mm center. Get one from that dusty fidget spinner you have laying…
- Pobrania
- 6213
- Polubienia
- 416
- Ocena
- 4,68
P
PrintablesNIRACreationz
Darth vader controller stand
Nice stand for game controllers. This stand is suited for xbox one and series x/s and ps5 controllers. It is inspired on Darth Vader from starwars. If you don't own a 3d printer or just want to buy it. You can buy it on my shop ←
- Pobrania
- 6080
- Polubienia
- 915
- Ocena
- 4,98
P
PrintablesGLeZz
Super Simple Universal Controller Wall Mount (PS4,XBOX,SWITCH)
Simple, easy and quick to print (around a hour) mount. Not a perfect design, might revisit later but works fine. Print instructions Category: Organization Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Resolution: 0.2…
- Pobrania
- 5770
- Polubienia
- 422
- Ocena
- 4,58
P
Printablespixel2
![Xbox series X [S] controller mini wheel](https://media.printables.com/media/prints/157078/images/1468543_a9941f77-2739-4f1c-a938-4d727942ca80/large_display_xs_wheel_fs_start_157078.jpg)
Xbox series X [S] controller mini wheel
Rack and pinion steering for your xbox series X [S] controller. 100 degrees of rotation. Enjoy finer control in racing games. What you need: 608 bearing, 22mm diameter, 7mm thick, 8mm center. Get one from that dusty fidget spinner you…
- Pobrania
- 5619
- Polubienia
- 367
- Ocena
- 4,82
P
PrintablesHellweaver666
PS5 DualSense Controller Holder for Ikea Skadis
Super simple model that I made by hacking together two other models from Thingiverse namely this PS5 controller stand and this Skadis hook . Aside from bodging the two together in Tinkercad I flattened the sides so that the model can…
- Pobrania
- 5544
- Polubienia
- 662
- Ocena
- 4,84
P
PrintablesLayerCake
IKEA Skadis Xbox One Controller Holder With Lip
Update 2023-04-30 Now updated to not require any screws everything just snaps together. Old version still available if you prefer it. Original Description Remix of my Xbox One controller holder for use with IKEA Skadis pegboard with an…
- Pobrania
- 5247
- Polubienia
- 826
- Ocena
- 4,97
P
PrintablesgArtur0
Xbox Series/One Controller Phone Mount for Narrow and Thick Phones
Original version was to big for my phone. Additionally I'm using case with “ring” so it was to thick so I created two new versions for anyone with small phone, and phone with thick case. Xbox Series One Controller Phone Mount Narrow - for…
- Pobrania
- 5196
- Polubienia
- 479
- Ocena
- 4,86
P
PrintablesLordTalon34
Controller Stand PlayStation, Xbox, Switch
Thing files for Browns PlayStation Xbox Switch Controller Stand by brown1985 - Thingiverse
- Pobrania
- 4981
- Polubienia
- 780
- Ocena
- 4,84
P
PrintablesHomefab3d
PS5 DUALSENSE CONTROLLER PHONE MOUNT
New version here: https://www.printables.com/model/1840378-ps5-dualsense-controller-phone-mount-bigger-strong This a remix of https://www.printables.com/model/148212-dualsense-simple-phonemount I wanted to be adjustable according to the…
- Pobrania
- 4966
- Polubienia
- 385
- Ocena
- 4,7
P
PrintablesChad_Taylor
Xbox Controller Racing Wheel 100% 3D printed - TEST FIT
TEST FIT TEST FIT TEST FIT Head here for the full Xbox design PS4 Version Available Here PS5 Version Available Here Switch Version Available Here Print and test controller clips to make sure they fit. 4 files provided here: 1: STEP file…
- Pobrania
- 4858
- Polubienia
- 1774
- Ocena
- 4,2
P
PrintablesCade Wierck
Universal Controller Stand
Universal Controller Stand. Smooth, flexible, and perfect for gamers.
- Pobrania
- 4848
- Polubienia
- 755
- Ocena
- 4,91
P
PrintablesThree Pieces Controllers
Polybar System - 3D Printed Guitar Controllers
We are currently in the final stretch of development for the final version of the Polybar System. If you have purchased a solderless kit or a DIY kit, please download the Beta 2 files located on our Discord server . 3D Printable Music…
- Pobrania
- 4821
- Polubienia
- 424
- Ocena
- 4,8
P
Printablesneyth_makes
PS5 Controller Clip
This is a remix of DiilanDH's controller holder, but the system won't let me put it in. I improved the fit to the console and the controller so that it doesn't get knocked off so easily. I also have a version with the PS logo Check out my…
- Pobrania
- 4796
- Polubienia
- 619
- Ocena
- 4,86
P
PrintablesMAKE IT TV
PlayStation PS5 Dualsense Minimalist Controller Stand with PS LOGO
You inspired me to Add the Playstation brand. THX @Hazzardness https://www.printables.com/de/@Hazzardness_250785
- Pobrania
- 4460
- Polubienia
- 416
- Ocena
- 5
P
PrintablesWan
Sackboy Phone/Controller Holder
This model will require some supports between the legs, under the hands, zipper and the head as well. Add plenty of infill to keep it sturdy! I recommend getting the bottom plate for stability, but I have not been able to test this print…
- Pobrania
- 4435
- Polubienia
- 856
- Ocena
- 5
P
PrintablesJeff Chen
PS5 DualSense Controller Stand
100% inspired by the Switch Pro controller by npiegdon ( https://www.thingiverse.com/thing:3030629 ). Thanks to davec54's 3D scan, I have improved upon the original version of this stand. Now the thing fits like a glove. It's quite a bit…
- Pobrania
- 4038
- Polubienia
- 325
- Ocena
- 4,95
P
PrintablesBenjDavidson90
Playstation 5 controller round wheel (Mustang style) PS5
This is a remix of https://www.printables.com/fr/model/157076-playstation-5-controller-mini-wheel from @pixel2_237985. Presentation The original wheel with two circles was not confortable to me, so I designed a real round wheel to be more…
- Pobrania
- 4000
- Polubienia
- 562
- Ocena
- 4,63
P
PrintablesJosh Designs
Poly Clone Hero Controller
Stuff you need to buy: -M3x20mm screws (17 count) -M3x20mm nuts (17 count) (Optional but suggested) -Kailh low profile switches (9 count) -USB encoder OR Arduino pro micro OR equivalent usb board that can act as a game controller -USB…
- Pobrania
- 3983
- Polubienia
- 643
- Ocena
- 4,97
P
PrintablesB3D_Printing
Gaming Controller Stand
I had a friend ask me to design a small controller stand, and this was my result! The design works great with all the controllers I have personally, including; Xbox One Playstation 4 Playstation 5 Very easy to print on its side, although…
- Pobrania
- 3847
- Polubienia
- 367
- Ocena
- 4,86