P
Printableskristianmedk
Makita Router Circle Jig (RT0700CX4)
24cm radius jig for the Makita Router Circle Jig (RT0700CX4). Uses M6 Hex hardware
- Pobrania
- 2916
- Polubienia
- 524
- Ocena
- 4,94
Wyniki wyszukiwania: cx
1058 modeli
P
PrintablesKN16
PP MCXish Folding Brace
A folding pistol brace inspired by the legendary Sig Sauer MCX Thin Folding Stock. It attaches to anything with a Picatinny rail and is a stylish accessory to your favorite PDW. There are detailed printing and assembly instructions under…
- Pobrania
- 2730
- Polubienia
- 214
- Ocena
- 5
P
PrintablesSoarpix
SCX24 JEEP Wrangler body
SCX24 JEEP Wrangler body Category: R/C Vehicles
- Pobrania
- 1549
- Polubienia
- 150
- Ocena
- 5
P
PrintablesDanielAlex
Star Wars Ghost VCX 100
Ghost The Ghost is the Hero-ship from Star Wars Rebels . It's a corellian VCX-100 freighter modified for combat. It also appeared in the background of Rogue One . This is a model at 1:270 scale. It's 16.3cm long, 12.6cm wide and 5.1cm…
- Pobrania
- 1415
- Polubienia
- 241
- Ocena
- 5
P
Printablesdaver18qc
1/10 Scale Bumper Jack SCX10
* UPDATE: I made V2 with looser tolerances, V1 was a bit tight and needed too much sanding to fit. * UPDATE2: V3 further enhances strenght, more space for the foot bolt too. Length : 127mm Base : 17mm X 17mm Should be pretty perfect scale…
- Pobrania
- 1303
- Polubienia
- 313
- Ocena
- 4,88
P
PrintablesN0_Lan
Scx24 Lcg chassis
-Check out my new design here - This is a work in progress scx24 chassis. It has a slight angled skid and fully customizable skid plate angle to allow better break over angle. There is a version for all wheelbases ( I have not tested the…
- Pobrania
- 1186
- Polubienia
- 170
- Ocena
- 5
P
Printablesprintable
Axial SCX24 AX24 Driveshaft (updated)
Driveshaft for 1/24 scale crawler axial SCX24 and Probably AX24. First pass so still a little rough but practical. Designed this so I could flip my motor/transmission around for more weight forward. Needed custom driveshaft lengths. I…
- Pobrania
- 1096
- Polubienia
- 102
- Ocena
- 5
P
PrintablesDepep1
Tremor Chassis V2 for Scx24
This is V2 of my Tremor chassis for the SCX24 that I designed. It is a low CG-style chassis / Comp chassis. *If you are interested in selling 3D prints of this model please contact me* There are 2 versions to this chassis. A flat skid…
- Pobrania
- 1036
- Polubienia
- 175
- Ocena
- 4,75
P
PrintablesJames@ThePrintCodex
PCX: Color Chip
Colour swatch chips to match into The Print Codex system. Make it your own by printing reference chips of additional filament you've purchased. Features Easily determine material and brand of your past prints. Each chip has the brand and…
- Pobrania
- 876
- Polubienia
- 198
- Ocena
- 4,88
P
Printablespolymech3D
Armadillo Off-Road Truck 1/10 body for SCX10 III
Armadillo off-road truck body for SCX10 III Hard body that has been designed to fit the SCX10 III Base Camp builder's kit chassis (AXI03011). The body might fit other 313mm chassis as well but the mounts need to modified accordingly.…
- Pobrania
- 832
- Polubienia
- 244
- Ocena
- 5
P
Printables1_24Buddy
SCX24 Buggy
This is a work in progress scx24 chassis I have been working on for myself but have decided to list for free. It may not work with all stock or aftermarket parts, but you may be able to make alternative parts work. This was designed to…
- Pobrania
- 807
- Polubienia
- 165
- Ocena
- 4,67
P
PrintablesJames Spadaro
SCX24 Trailer
This is a little utility trailer for an SCX24. I sized it to be wide enough to fit an scx24 between the fenders even with the mill stone wheel wideners. All the parts can be printed without support, except the inner axles. I have them put…
- Pobrania
- 806
- Polubienia
- 169
- Ocena
- 5
P
PrintablesCyclenerd
Makita CXT Battery Mount for 10.8V / 12V
Simple wall mount for 10.8V / 12V Makita CXT batteries. Keeps batteries organized and safe. Category: Tool Holders & Boxes
- Pobrania
- 787
- Polubienia
- 51
- Ocena
- 4,82
P
PrintablesLiviu3D
SCX24 Stand
Update: i flipped the top pins so the axles sit right.
- Pobrania
- 787
- Polubienia
- 103
- Ocena
- 5
P
PrintablesYpsilantea
MCXish folding brace with extra beef
Automatic support generation seems to work fine, use your discretion for what your printer can handle. Unlike the original version, the brace pieces can be printed flat on the bed. I used 6 top+bottom walls to add some stiffness. BOM is…
- Pobrania
- 783
- Polubienia
- 65
- Ocena
- 0
P
PrintablesReese
scx24 flex plates
this model will lower your scx24 lower to the ground and improve the center of gravity causing less rollovers when crawling and climbing steep obstacles. i suggest you make them a little bit thicker in your slicer for better performance,…
- Pobrania
- 756
- Polubienia
- 89
- Ocena
- 5
P
Printablesxboxsniper22
SCX10 Pro Frame
It's very close to the original and can be used as a template to create other parts.
- Pobrania
- 745
- Polubienia
- 62
- Ocena
- 0
P
PrintablesRobert Posey
Scx10 chassis
Found this over at 3D warehouse, looks to be made by machfud. E. https://3dwarehouse.sketchup.com/model/4daea5e0-66f1-4aa2-acda-0a4cdee04284/SCX-10 Thought I would share it here as it is so useful to mock up parts. If the scale is wrong,…
- Pobrania
- 677
- Polubienia
- 61
- Ocena
- 0
P
PrintablesJosh
SCX24 Flex Link Mod
This is the best mod for your SCX24 for only a few cents of filament! Gives your rig around 65% more flex! This is probably my most favorite mod I have ever made. To install you will want to remove your shocks from the towers and put them…
- Pobrania
- 627
- Polubienia
- 58
- Ocena
- 5
P
PrintablesN3EIL
SCX24 Gladiator Rock Sliders
Mirror Object to fit both sides of your SCX24 Gladiator.
- Pobrania
- 619
- Polubienia
- 62
- Ocena
- 5
P
Printablescjfoss
Makita 12v CXT Tool Holder
Screws to a shelf to hang 12v CXT Makita tools from the battery interface. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 20% Filament: Tecor PLA+ Black Category: Tool Holders…
- Pobrania
- 613
- Polubienia
- 36
- Ocena
- 5
P
PrintablesRedbeard X18
MCX Style AR grip with inserts
This grip is patterned after the Sig MCX grip. Inserts are separated to allow for printing in different colors or even different materials - I've used PLA, TPU, PETG, wood PLA, and others for the insert. I recommend printing the grip with…
- Pobrania
- 593
- Polubienia
- 70
- Ocena
- 0
P
Printablesmce076
Axial SCX10 Skid Plate High Clearance
This is a skid plate designed for the Axial SCX10. It has a flat bottom and counter sunk screws for high clearance and a pocket cut out for lighter weight and less filament/time when printed. Screw holes and counter-bores are according to…
- Pobrania
- 580
- Polubienia
- 53
- Ocena
- 0
P
PrintablesSilverBullet126
Axial SCX6 - Axle Stands
Axial SCX6 axle stands; separated by front and rear (since they're different). My goal was to have the strength to hold up a ~28 lbs truck, but use as little filament as possible. You'll need to complete, two rear verticals (they're…
- Pobrania
- 575
- Polubienia
- 34
- Ocena
- 4,57
P
PrintablesBrad S
scx24 wall mount
Update: Verified that the v1 remote fits. This is my take on a wall mount for the scx24. I wanted something that I could use to get my scx24 off the table and out of the way. I also wanted something that would hold the controller. I…
- Pobrania
- 568
- Polubienia
- 81
- Ocena
- 5
P
PrintablesDepep1
RBX24 (SCX24 Rock Bouncer)
Here's V2 of the RBX24, Rock Bouncer 24th scale Chassis for the SCX24. Based on 2 versions of the IRL Revolution 2.0 chassis. https://www.wideopendesign.com/revolution-2-0-rock-crawler-chassis…
- Pobrania
- 554
- Polubienia
- 86
- Ocena
- 0
P
PrintablesAccessible RC
EDIT JERRY CAN FUEL CAN TRX4 SCX10 K5 RC4WD SCALE RC
20L Jerry Can
- Pobrania
- 549
- Polubienia
- 70
- Ocena
- 5
P
PrintablesDerakCZ
lcg scx24 chassis
i made this chassis by myself to lower the center of gravity on my scx24 jeep gladiator , its lengt is universal so it will fit every scx24 everything is included in the pack , including rock sliders battery and esc mount are merged into…
- Pobrania
- 512
- Polubienia
- 70
- Ocena
- 5
P
Printablescaribou
Axial SCX24 High Clearance Suspension Links - Basecamp/C10/JLU/Bronco
Printable high clearance links for the Axial SCX24 micro crawler platform Works well with both stock and custom chassis I developed these high clearance links for my Axial SCX24 Basecamp, but they should also fit the C10, JLU, and Bronco.…
- Pobrania
- 507
- Polubienia
- 67
- Ocena
- 3
P
PrintablesForker45
SCX24 Wide Beadlock Wheels
Background This print file is an extensively modified remix of Arkon Lincoln SCX24 Beadlock Wide Rims on Thingiverse by CheapAZHobbies I used PrusaSlicer to scale, remove material, & correct the geometry so it could be used on my SCX24…
- Pobrania
- 475
- Polubienia
- 71
- Ocena
- 5
P
PrintablesDiscoJon
SCX30 Case
Printing Case and Lid: PETG or PLA recommended 3 Perimeters .20 Layer Height 10% Grid or Rectangular infill Inserts: TPU or other flex recommended 0 top and bottom layer 10% gyroid infill 2 perimeters 2-Feb-2026 Added Case with Handle…
- Pobrania
- 471
- Polubienia
- 64
- Ocena
- 4
P
PrintablesBladeLab
Beyblade CX Assist Blade – "Rail Sting"
We thought it would be cool to experiment with the gimmick from Scorpion Sting as an Assist Blade. So we made it! As the bit spins during an X-rail, this assist blade will swap modes! It is not free-spin, and is locked to the rotation of…
- Pobrania
- 468
- Polubienia
- 26
- Ocena
- 3
P
PrintablesChris
SCX24 - Axle Skid Plate
To help protect your SCX24 Axle housings while out Crawling around your backyard or your neighborhood. The mount will fit Stock SCX24 Axle diff covers, and will also fit Injora diff covers on Stock Axles. Mounting holes on both ends of…
- Pobrania
- 468
- Polubienia
- 98
- Ocena
- 5
P
Printablesahead_RC
SCX10 iii Gladiator Flatbed
Want an overland style SCX10 iii Gladiator? You can now build one! The flat bed originally designed and printed for our SCX10 iii Gladiator Aussie Style Overland build . The flatbed comes with 2 different versions of an oversized, extra…
- Pobrania
- 463
- Polubienia
- 95
- Ocena
- 5
P
PrintablesMotomami +
OWAKCX Sprunki
It is better to print it with structure, and besides the neck is very small so when you print it give it a layer of glue
- Pobrania
- 459
- Polubienia
- 7
- Ocena
- 0
P
PrintablesRevellio
Custom Crawler Chassis based on SCX10 Carbon Rails
General description I was looking for a simple, flexible and affordable chassis for my many scale crawler projects. Nothing was optimal and I developed something myself. The chassis is based on the TFL-Racing carbon rails for the SCX10…
- Pobrania
- 447
- Polubienia
- 71
- Ocena
- 0
P
PrintablesNie9001
FCX18-1/18 Scale RC Toolbox
I made this toolbox specifically to fit the FCX18 FMS LC90 roof rack. Toolbox should be good for all 18 scale RC.
- Pobrania
- 443
- Polubienia
- 71
- Ocena
- 5
P
PrintablesJohn Doe
FCX18 Wheel Wells and Shock keys
Wheel wells for FCX 18 - you'll need to perform a cut in the slicer and orient the flat parts to the build plate. Shock Keys, Rear keys are in 2 parts to make it easier to print. Front Shock keys I got lazy, just print the side with the…
- Pobrania
- 440
- Polubienia
- 16
- Ocena
- 0
P
PrintablesKerndrup
Holder for Festool drill CXS and TXS
Holder mounting festool CXS and TXS under cabinets or other places.
- Pobrania
- 434
- Polubienia
- 65
- Ocena
- 4,75
P
PrintablesChris
SCX24 - AX24 - Steering Link with Included Drag Link
Axial SCX24 and AX24 compatible stock width Steering Link with included Drag Link I was wanting a color matched Steering and Drag link for my Orange AX24, a few moments later I had these printing for my enjoyment, in the color of my…
- Pobrania
- 412
- Polubienia
- 59
- Ocena
- 4
P
PrintablesJimi Asafa
Beyblade X Cx Lock Chip
lock chip for beyblade x cx
- Pobrania
- 407
- Polubienia
- 11
- Ocena
- 5
P
Printablesinfinitevalence
m720q/m920p Baffle for CX312B-PRO Connect X-3 Card
Print Settings 0.4mm 20% infill Support - Touching Build Plate Scale to 10% design is 10:1 to allow for detail. Can be printed with support and face down for quick/draft prints in under 1h, or with support face up for higher quality…
- Pobrania
- 404
- Polubienia
- 38
- Ocena
- 5
P
PrintablesRevellio
AXIAL SCX10 I & II - Chassis Parts / Update 22.10.2026 - New Body Mounts
Description General I have collected all SCX10 I & II parts i published on Printables so far. The chassis rails and skid of the SCX10 I are absolutely identical to those of the SCX10 II. So, many parts are suitable for both chassis.…
- Pobrania
- 398
- Polubienia
- 51
- Ocena
- 0
P
Printableshumming
SCX24 Front and Rear Axle Limiting Strap Mounts
Simple limiting strap mounts for the front and rear axles on the SCX24. Front axle is for axles upgraded to an ES08MA II steering servo with one of the typical kits. I printed in PETG for the toughness. ABS would also be an excellent…
- Pobrania
- 394
- Polubienia
- 36
- Ocena
- 5
P
PrintablesUGhpbAo=
Makita 12V CXT Battery Connector
WARNING: The Makita CXT batteries do not appear to have built in battery protection, hence you will destroy them if you over discharge them. It is recommended that you fit a 3S BMS as part of your build. The terminals are designed to take…
- Pobrania
- 393
- Polubienia
- 30
- Ocena
- 5
P
PrintablesDepep1
RBX24 (Scx24 Rock Bouncer Chassis)
Fixed a small issue with one of the roofs. Here's V2 of the RBX24, Rock Bouncer 24th scale Chassis for the SCX24. Based on 2 versions of the IRL Revolution 2.0 chassis. https://www.wideopendesign.com/revolution-2-0-rock-crawler-chassis…
- Pobrania
- 391
- Polubienia
- 107
- Ocena
- 5
P
PrintablesDecentFarts
TRX4M Modular Track Part 11: SCX24 Customizable
Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…
- Pobrania
- 389
- Polubienia
- 74
- Ocena
- 5
P
Printablesxxqpxx
scx24 skid / trans mount
My transmission was binding on the original model. I did a quick boolean in Blender to make it work. Category: R/C Vehicles
- Pobrania
- 386
- Polubienia
- 29
- Ocena
- 0
P
PrintablesYetiEngineering
TruckNut Kit for Axial SCX24
TruckNut kit for Axial SCX24. The kit is designed for the Axial SCX24 C10 but should work with other body styles, let me know in the comments. It is designed to be a fun joke to install. The trucknut holder piece should be glued into the…
- Pobrania
- 384
- Polubienia
- 49
- Ocena
- 0
P
PrintablesTomoaki Shimazu
FCX24 Power Wagon Wrecker Truck
FMS FCX24 Power Wagon wrecker truck inspired by Matt's Offroad Recovery’s world's biggest offroad wrecker, with man-powered winch. [Instructions] Slicer setting for winch gears (both L and S), select "concentric" for top/bottom pattern.…
- Pobrania
- 381
- Polubienia
- 67
- Ocena
- 0
P
PrintablesManifold3D
Koenigsegg CCX with print in place moving wheels
I remixed the CCX model to print on its side with the wheels and axles built in. Print as oriented, no supports, if slic3r doesn't import it correctly use Cura. See my collection for more cars:…
- Pobrania
- 373
- Polubienia
- 44
- Ocena
- 4,67
P
PrintablesDepep1
RBX24 (Rock Bouncer SCX24 Model) V1
DEPRECIATED Here is version 2: https://www.printables.com/model/279013-rbx24-scx24-rock-bouncer Here is version 1 of my RBX24, Rock Bouncer chassis for the scx24. It's based on the IRL Revolution 2.0 chassis.…
- Pobrania
- 371
- Polubienia
- 55
- Ocena
- 0
P
PrintablesDepep1
Tremor Chassis Scx24
DEPRECIATED UPDATED MODEL: https://www.printables.com/model/484851-tremor-chassis-v2-for-scx24 This is a chassis for the SCX24 that I designed and 3D printed. It is a low CG-style chassis / Comp chassis. I designed this with a brushed…
- Pobrania
- 361
- Polubienia
- 82
- Ocena
- 5
P
PrintablesFrankWL
Fraesplatte für Makita RT0700CX2J Oberfräse
ReadMe.txt Fraesplatte für Makita RT0700CX2J Oberfräse Anwendung: Die Fraesplatte dient der grösseren auflage auf dem Werkstück beim Arbeiten mit der Makita Oberfraese. Dies ist ein Remake vdes Projektes "Baseplate for Makita RT0700…
- Pobrania
- 359
- Polubienia
- 49
- Ocena
- 0
P
Printablesjt001sk
FMS FCX18 LC80 inner fenders
FMS FCX18 Toyota Land Cruiser 80 inner fenders with side steps. Print with tree supports due to the side step/rock slide part of the inner fender. Two screws are already present on the chassis to mount the inner fenders. The inner fenders…
- Pobrania
- 354
- Polubienia
- 23
- Ocena
- 0
P
Printablesemmaanuel
Base plate for Makita router RT0700CX2J
A simple replacement plate for the router Print instructions nothing special
- Pobrania
- 353
- Polubienia
- 44
- Ocena
- 0
P
PrintablesRMTCTRL
Cantilever Suspension for Axial SCX10
I made this Cantilever Suspension to remove the rear shock towers so you can have more options for bodies on you Axial SCX-10. My Main goal was to use the stock shocks to keep the cost down. You will need to print the parts and purchase a…
- Pobrania
- 350
- Polubienia
- 95
- Ocena
- 0
P
PrintablesYetiEngineering
SCX24 Low CG Battery Tray V1
Low center of gravity (CG) battery tray designed for the Axial SCX24 R/C rock crawler. The battery tray is designed to fit the Chevrolet C10 body style but should fit other bodies. Please tell me in the comments what bodies it fits. Holes…
- Pobrania
- 347
- Polubienia
- 59
- Ocena
- 5
P
PrintablesZanthrax
Hinged body mount for Axial SCX10III Early Bronco
Makes swapping batteries a lot simpler by keeping the body connected to the chassis. Uses the stock mounting points. Replaces the rear bumper mount and the mounting bracket connected to the roll cage on the body. 2 additional M3 holes are…
- Pobrania
- 346
- Polubienia
- 30
- Ocena
- 5
P
PrintablesLarry Kalis
Scx24 servo mount Injora 4-link
This is a custom servo mount remixed to fit a Injora 4-link high clearance links. Print with infill 100% or 99 bottom layers. Also orientate so the part so printing is upside down for clean fit with diff. link to servo i used…
- Pobrania
- 342
- Polubienia
- 29
- Ocena
- 0
P
PrintablesChris
SCX24 - Crawler Course Gate Set And Stackable Cones
Here is a set of Crawler Course Gates that can be used in your scale RC crawler course builds. The gates included in this set number Gate 1, through Gate 15. Each of the numbered course gates, are a pair. Meaning each pair includes the…
- Pobrania
- 338
- Polubienia
- 66
- Ocena
- 0
P
PrintablesDennis Howse
SCX24 Comanche
fixed the thickness on the hood and roof for resin printing. Category: R/C Vehicles
- Pobrania
- 329
- Polubienia
- 46
- Ocena
- 5
P
PrintablesAdam Kimmerly
QMX / QCX / (tr)uSDX Knob
Let's face it, the standard volume and tuning knobs for the QMX, QCX, and (tr)uSDX aren't great. I set out to make them a lot better. Here's my solution. Print these top-side down, then use some M3 set screws like these…
- Pobrania
- 328
- Polubienia
- 38
- Ocena
- 5
P
PrintablesRandyLahey
Durable SCX24 Velcro Body Mount Upgrade
This is upgrade part to replace the pins on SCX24 trucks with a flat plate that velcro or magnets can be attached to. This was inspired by the mounts the newer bronco model. There are multiple adjustment points to allow more flexibility…
- Pobrania
- 324
- Polubienia
- 26
- Ocena
- 5
P
PrintablesDecentFarts
TRX4m Modular Track Part 11.A SCX24
Took the amazing design from Ed which was then remixed by Dieter Spillmann and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people…
- Pobrania
- 322
- Polubienia
- 68
- Ocena
- 5
P
Printablesexperify3d
Mazda CX7, CX9, RX8, RX3, RX6 Motor window gear
Replacement for the window motor gear. Works as intended, printed with PETG-CF.
- Pobrania
- 312
- Polubienia
- 32
- Ocena
- 5
P
PrintablesBrainanator
SCX10 Skid Plate. High Clearance, Flat Bottom
Center skid plate for the Axial SCX10 RC crawler. This gives you a little more ground clearance to prevent getting hung up. This skid plate DOES affect link geometry slightly. There are 2 version, once for the stock links using Axial…
- Pobrania
- 310
- Polubienia
- 17
- Ocena
- 0
P
PrintablesRunfrcover
SCX24 Chassis Stand
Chassis stand for the Axial SCX24 crawlers. One piece with tabs to grip the skid. Built for my SWB Deadbolt but should work with all models. STD version is symmetrical for all SCX24 models. Deadbolt version has the back edge extended to…
- Pobrania
- 306
- Polubienia
- 21
- Ocena
- 5
P
PrintablesDecentFarts
TRX4M Modular Track Part 12: SCX24 Customizable
Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…
- Pobrania
- 306
- Polubienia
- 61
- Ocena
- 5
P
PrintablesTebonr
FCX18 Suspension Mod
Description: I designed these “Flex Blade” arms to get more travel out of the stock suspension when using the stock shocks. I have Treal 4 link arms installed, but it should work the same with the stock links. The mounting for the flex…
- Pobrania
- 305
- Polubienia
- 35
- Ocena
- 0
P
PrintablesFrankWL
Fraesplatte für Makita RT0700CX2J Oberfräse
ReadMe.txt Fraesplatte für Makita RT0700CX2J Oberfräse Anwendung: Die Fraesplatte dient der der Arbeit mit einer Frässchablone beim Arbeiten mit der Makita Oberfraese. Material: PLA Schichtdicke: 0,2mm Füllung: 75% Farbe: nach Belieben…
- Pobrania
- 303
- Polubienia
- 34
- Ocena
- 5
P
PrintablesRubber Duck
Finger Turn For Traxxas or SCX24 Remote
I have a Traxxas TRX4m, I drove it so much that I got tired of using two hands. So I went into Fusion 360 and fixed my problem. I would recommend TPU but PLA or something like that will work. I recommend printing the nob at 100% infill…
- Pobrania
- 303
- Polubienia
- 47
- Ocena
- 4,5
P
PrintablesCPS_Systems
Makita CXT 12V 1-4 Place Battery Non-Latching Holders Mount
Makita CXT 12V (10.8V) 4 place battery holder. Includes files for 4, 3, 2 and 1 battery holders. 4 place holder is 253mm x 17mm overall. No supports needed. Print on edge as pictured. Edit: Added V2 40mm holes and labelled. Tool holder…
- Pobrania
- 301
- Polubienia
- 25
- Ocena
- 5
P
PrintablesChris
SCX24 - Snow Plow Mount for Emax Servos with 3mm LED Mounts
SCX24 - Snow Plow Mount with 3mm LED Mounts Here is snow plow mount that will fit an EMax ES08MAII or similar servo. There are two versions of the snow plow mount in this pack. One version with 3mm LED mounts on the bumper. The second…
- Pobrania
- 295
- Polubienia
- 64
- Ocena
- 5
P
PrintablesDerakCZ
Scx24 competitiom body
this body is made to fit on the custom lcg chassis by N0_Lan ( the betty version) in the files is inlcuded fuel tank for mounting a magnet also there are fender that i made but they are not included in the picture ! happy printing , in…
- Pobrania
- 289
- Polubienia
- 43
- Ocena
- 0
P
Printablesdaniel lindenmuth
SCX24 Jeep Wrangler Gladiator Scorpion Bumper For EcoPower_E-Max Upgraded Servo
SCX24 Jeep Wrangler Gladiator Scorpion Bumper For EcoPower_E-Max Upgraded Servo
- Pobrania
- 289
- Polubienia
- 31
- Ocena
- 5
P
PrintablesGRO
Bip&Go TRP-4010 Holder Mazda CX-30
The holder for my BIP&GO has been lost so I made a new one Use PETG with organic supports to print I used an 0.6mm nozzle with 0.3mm
- Pobrania
- 286
- Polubienia
- 24
- Ocena
- 5
P
PrintablesDasumocat
Axial SCX10ii 1/10 scale Jeep front bumper
I found this on Cults and printed it using the SLS1S. It turned out really well except that the mounting pegs are just a few mm too narrow. I can still manage to mount it on my SCX10 Jeep but it gets tight. I also created a winch mounting…
- Pobrania
- 285
- Polubienia
- 42
- Ocena
- 0
P
PrintablesBen
Axial SCX24 Lexus GX470 / Deadbolt 4 Link Conversion + High Clearance Links
High clearance front and rear and 4 link conversion set of links for the SCX24 Lexus GX470 and Deadbolt (rear links will not fit Deadbolt, see linked original for rear links that will fit). There are two versions of front links - standard…
- Pobrania
- 281
- Polubienia
- 25
- Ocena
- 0
P
PrintablesForker45
SCX24 Bronco Tow Hitch & Receiver
I designed this receiver hitch to be super glued onto the bottom of the SCX24 Bronco rear bumper. The drop hitch is removable for clearance when you aren't towing. The receiver profile matches the bumper as much as possible to reduce…
- Pobrania
- 281
- Polubienia
- 43
- Ocena
- 5
P
PrintablesChristopher Nupp
1:24 1980s Safari Porsche RC Body SCX24
something messed up when exporting every time and that there are some lines, I just filled them with super glue and sanded them smooth. This file fits the wheelbase of the axial scx24 C10
- Pobrania
- 280
- Polubienia
- 35
- Ocena
- 0
P
PrintablesMRC (Micro, Revolution, Customs)
SCX24 RC BODY DEUCE IN A HALF MILITARY TRUCK
Online 3D Printing Instant Quote - JLC3DP great place to have your RC body to be printed for cheap and they use resin with the printing so everything will show it detail. THIS IS A OPTION IF YOU DON'T HAVE A 3D PRINTER
- Pobrania
- 279
- Polubienia
- 31
- Ocena
- 0
P
PrintablesRobert Posey
SCX10 Hotrod body
This 32? Ford cab is designed by Ossum (you can find his design in the remix area.) I Basicaly squashed it down 20% to make it look more rat rod like. And some other adjustments to fit it on to a SCX10 frame. His work is amazing! Some day…
- Pobrania
- 276
- Polubienia
- 38
- Ocena
- 0
P
PrintablesRemy
Axial SCX24 Micro Crawler Stand
Chassis stand for the Axial SCX24 micro crawlers Designed fairly generic so it should fit most crawlers.
- Pobrania
- 275
- Polubienia
- 39
- Ocena
- 5
P
PrintablesFaHu
Makita RT0700CX2J Tool Wall Holder
Here you can find holders for all devices and accessories of the Makita Router RT0700 (RT0700CX2J). Most of the time i'm using the router at my workshop, so i wanted have quick access to devices and accessories. I designed holders with…
- Pobrania
- 274
- Polubienia
- 71
- Ocena
- 5
P
PrintablesUntrusted Source
Lenovo Tiny CX354A PCIe Bracket
This is a PCIe bracket that can be used on your Lenovo Tiny PC with a Mellanox CX354A (and possibly other 40gbe cards) ⚙ Features Vent holes on the right side that match the side vents of the Lenovo Tiny PC Bracket is secured to the card…
- Pobrania
- 270
- Polubienia
- 26
- Ocena
- 5
P
PrintablesPrinter
Axial SCX6 Honcho Rear Bumper for Trailer Hitch
I ordered an SCX6 trailer hitch but was surprised when it didn't fit my Honcho. So I designed a new rear bumper to make it work. It is modeled around a cheap ali express SCX6 hitch but I think they're all the same. The light holes are…
- Pobrania
- 263
- Polubienia
- 27
- Ocena
- 0
P
Printablescuorekid
Brodit Design Phone Mount - Mazda 2/Demio (DJ) 2015+ and CX3
Brodit design phone mount for Mazda 2 (DJ) 2015+ and CX3 Ball Phone Mount need 4 x M2.5 x 8mm to screw at the holder And need 4 brass insert M2.5 * 5 Recommend print with PETG or ABS . Holder V2 I just redesign with thicker body and use…
- Pobrania
- 262
- Polubienia
- 14
- Ocena
- 5
P
PrintablesChris
SCX24 - Crawler Course Gate - Start/Finish Gates
Start/Finish gates intended to be used with the SCX24 - Cone To finish off the Crawler Course you will surely need Start/Finish Line gates. Multi-Color Gates can be achieved by a simple filament swap to achieve the Black-White checked…
- Pobrania
- 261
- Polubienia
- 60
- Ocena
- 5
P
PrintablesTimothy Cox
SCX 24 Teeter Totter
I remixed aiye's 1/18th scale Teeter totter for the SCX24 rock crawlers I scaled everything down to 93.55% (mainly to fit on my Flash forge adventure 5m) which turned out to fit the 24th scale perfectly. i also designed a clip to snap the…
- Pobrania
- 259
- Polubienia
- 38
- Ocena
- 5
P
Printablescaribou
Axial SCX24 High Clearance Suspension Links - Gladiator/Power Wagon
Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the SEMA links on Cults. V1 and V2 have identical footprints/outlines – the only…
- Pobrania
- 259
- Polubienia
- 28
- Ocena
- 5
P
PrintablesDepep1
SCX24 Suspension Link Pivotball With Flat End
I had an issue where my links kept falling off the pivot ball so I took some inspiration from my injora shocks and added a flat side that keeps the links from falling off. Category: R/C Vehicles
- Pobrania
- 259
- Polubienia
- 47
- Ocena
- 5
P
Printablescaribou
Axial SCX24 High Clearance Suspension Links - Deadbolt / Betty
I HAVE NOT TESTED THIS ONE YET, PLEASE LET ME KNOW IF IT NEEDS ADJUSTMENT Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the…
- Pobrania
- 253
- Polubienia
- 32
- Ocena
- 0
P
PrintablesJimjo
SCX10 III - High Clearance Bumper
High Clearance front bumper compatible with the Axial SCX10 III Basecamp. Please note the bumper is NOT compatible with the JLU body or other bodys that use the “clipless” mounting system. Provides much improved approach angle vs the…
- Pobrania
- 253
- Polubienia
- 24
- Ocena
- 0
P
PrintablesDecentFarts
TRX4M Modular Track Part 1: SCX24 Customizable
Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…
- Pobrania
- 248
- Polubienia
- 75
- Ocena
- 5
P
PrintablesPricFlair
SCX30 Real beadlock wheels for stock size (18mm) tires
Inner Ring has been updated to make mounting substantially easier. Also the wheels are (and always were) compatible with Injora brass inner beadlock rings. Not to be confused with their inner wheel weights. [Rear wheel half has been…
- Pobrania
- 247
- Polubienia
- 34
- Ocena
- 0
P
Printablesiplop
2021/2022 Mazda CX-30 Center Console Phone Holder
Edit: Just a heads up, I recommend using supports like this when printing this: I also recommend printing this with big thick lines to speed up the print. This really isn't something that needs super fine detail in order to work. Might as…
- Pobrania
- 246
- Polubienia
- 18
- Ocena
- 5
P
PrintablesJames@ThePrintCodex
PCX: Storage Box
This storage box is for your Print Codex swatch chips. Make it your own by printing reference chips of additional filament you've purchased. Features Store PCX chips in a small space Chips are easy to remove Multicolor and Debossed logo…
- Pobrania
- 245
- Polubienia
- 39
- Ocena
- 5
P
Printableshumming
SCX24 Tremor V2 Remix: Badger
I wanted to build a version of the tremor that had more clearance for shocks to be vertical without binding, and @Depep1 was kind enough to include the fusion files in his original. 2/29/2024 update - Added Step file as well as solidworks…
- Pobrania
- 245
- Polubienia
- 53
- Ocena
- 5