Liczymy pasujące modele…
Using TheBrokenNerd83's design ( https://www.thingiverse.com/thing:3578797 ), I printed the helmet in different sizes and tried to use as little support structure as possible. I share my experience with you in the video. This Video shows…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
I decided to try it without support and it worked. I chose the brim around the legs for a better feel. I haven't tried it without it. In order to print successfully, it is important to have a well-aligned bed, a lower hotend temperature…
Printing: There are no special printing requirements, NO supports . For example I print with 0,25 nozzle, 0,05- 0,07 mm layerheight, 2 perimeters, 20% infill. print max 3-4 layers. … I fix Mandala 01 Happy printing :-)
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
A Mandalorian Helmet piggy bank (money box) which is fully 3D-printed and can be opened and closed thanks to a locking screw mechanism BambuStudio file available here: https://makerworld.com/en/models/486544#profileId-399287 It needs…
I decided my Google home was a bit boring so designed him a BB8 Costume :-) If you haven't got a Home, then I've also included 'no speaker' parts so you can just make him as a model. youtube.com/watch?v=_-5x7baY81o Print instructions Can…
Hex stackable medal holder. Base is printed upside down on textured plate. Two magnets circle 10x5mm New version 2 with wider holes and magnet was moved to the top side
The Mandalorian. Added UV textures. offset .4 overall. Selective smoothing, sculpting. Major repairs needed on mesh.
v2 features include: Tapered shaft hole to make the propeller lift off easier. Blocking the shaft hole from the top side so you can only put it on in the correct orientation. Tested with TPU filament. Appears to fly just as well and far…
Windmill Toroidal - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 137 mm…
Mandalorian Helmet inspired knob . Star Wars STL Repaired thanks to Triple G Workshop Drill a hole for screw mounting If you liked this model, a coffee is always welcome ☕🙂 buymeacoffee.com/goodbuyerclub
You're #1 and now you have a medal to prove it!
A “Wolf School medallion” in The Witcher franchise. I modeled it using an image as a reference. Default size is the smallest I've tried with 0.4mm nozzle under 0.2mm layer height setting. Supports are required. Organic style (in the…
Don't forget to like this model. Pre-sliced gcode by ryanL You can check his made in the comment session. Multicolour pose. Category: Sculptures
MultiMaterial version MMU remix from: https://www.thingiverse.com/thing:246198 Print instructions E1 Yellow E2 Black E3 Orange E4 Red
Beskar Ingot: Mandalorian: Star Wars Print standing upright for best details. Textured on all sides.
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
This is the new chapter 5 season two medallions
This is a remix of mdkendalls successful “2,5” Three Jaw Chuck" for mounting on a Revopoint dual-axis turntable. The chuck can be mounted on the turntable with M6x8 countersunk screws or with the screws developed by Whitehawk2000 . From…
About I was looking to buy a MIDI pedal with a good range of motion and a fairly low price (mainly to control virtual instrument's expression/volume while my hands are on the keyboard, and my right leg is on a sustain pedal). I didn't…
v2 of the mount, very easy and fast to install with 8 large zip ties and 4 pcs M6 x25 screws the Logitech G29 pedal to Playseat challenge seat Also working with Thrustmaster t300 RS Print instructions PETG, print 2 times the G code or 4…
A little sculpture of a Dalek from Dr. Who. Made it for a school assignment. It was printed with PLA on a Prusa Mini. Plunger and blaster pieces can be fragile when taking off support.
THIS IS THE WAY Based on the sculpt models of our popular Mandalorian 3D printable action figure , here's a fully wearable costume of armor and gear for you to wear! Original sculpts, taken from our free action figure , blown up in size…
This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. This is a simple fast…
Just a 2D Mandalorian helmet. Slap any magnet you want on the back and VOILA!!! Included print file includes a color change. .stl also included Enjoy! And If you have a minute, check out my other models!…
I wanted to have a Medal Hanger that could be used by all sorts of people to display a variety of medals e.g., marathon, triathlon or whatever. I like the IPSC Medal Hanger by andrecolla on thingiverse.com, because it was split and so…
Custom lithophane stand included. Software used: Photoshop, Blender, Meshmixer, S3D. Dimensions: 176mm x 164mm x 6mm (6.92 x 6.46 x 0.24 inches). Print settings and information: https://www.gadunky.com/litho-print-settings/ Note: This is…
Designed to hold a Red Panda guitar pedal at a 30 degree angle. Pedal size 3 in x 4.6 in, works with many other pedals as well. We print on the side with no supports, then put rubber bumper feet on the bottom.
Remixed the Mandalorian trailer ball cover to fit into a 2" receiver hitch since I don't like leaving my hitch in all the time. Printed with gray PLA, and colored the middle in with a few coats of black sharpie, turned out pretty nice.…
I presented a medal hanger. A very simple, uncomplicated pattern to stick on double-sided tape to the wall. The model co
Easy to print medals to celebrate first, second and third place. Possible to do color change to emphasize the numbers on the medals. I used Oh my Gold, Galaxy Silver and Viva la Bronze (all PLA) for the different medals on 0,2mm Quality…
Fun dangling flip flop earrings with a multi-color print utilizing filament changes. Excited to see what color combinations you choose! Size up or down but watch the size of the post hole. We included the gcode for a set. But feel free to…
This is a remix of Ondřej Stříteský's "Standalone Drybox - with humidity sensor". This version only contains the bottom without the hole for the humidity sensor. Get the rest from Ondřej's original. You can place five pieces of this…
Medal 60 Diameter: 80 mm Ribon hole: 12 x 2 mm
This remix adds an autorewind spoolholder INSIDE the standalone Drybox. You can then throw away the buffer that comes with the Prusa MMu module. I wanted the original “standalone Drybox with humidity sensor" to support a parametric…
Very nice and detailed car wall art model of a ferrari sf-90 Stradale. Size can be adjusted as wanted.
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Add a serene touch to your space with the Lotus Mandala Coaster ! Measuring 100 mm in diameter and 4 mm in height, this beautiful design features an…
This is an original model I made myself in Fusion 360. I am entering the chopstick holder competition, this is the first one I am entering. The model is based on the traditional Japanese footwear called “Geta” and functions as a wooden…
Traditional Swedish horse blank for rosemaling
Randal at his instrument panel Monsters Inc.
Layer height: 0,15mm no infill PLA/PETG (doesn't matter) Check 3mf project file for cool settings
Easy to make a cute Dalmatian/Dog keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Super cool Grav Charge from the Mandalorian TV show! Modeled to look just like the one in the show. If you need a different magnet size let me know and I will make it for you. Print Settings: If you are putting a magnet in it, make sure…
Banksy VANDALISED PHONE BOX telephone box and pickaxe Executed in 2005. This work was installed in Soho Square, London 2005 and later recovered from Westminster Environmental Services. On 14 Feb 2008 it was auctioned in New York for…
So you have to pop out the medallions out of the print then; you have to glue the blank medallions I have created. like always follow i will follow you back ,and enjoy!
Flowerpot with pyramidal patern internal dimensions: diameter bottom 80mm diameter top 100mm height 75mm
The Mudhorn signet that the Mandalorian wears on his right shoulder pauldron. You can use a thin string, some 3mm thick filament, or a ball chain string thing.
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Bring elegance and balance to your space with the Sacred Lotus Coaster ! Measuring 100 mm in diameter and 4 mm in height, this beautiful coaster…
Coaster set inspired by the Legend of Zelda Ocarina of Time. All 6 of the coasters were printed in the corresponding color and filled with clear Epoxy to get a flat surface for your drink. each temple logo is a few millimeters below the…
Shiva Medallion A small Shiva medallion for where you desire. Designed on Tinkercad. One object to print. Clean your build surface with (Dawn) dishwashing soap! Avoid lifting and warped prints! Scale's easily if you want a larger or…
Modified version of cBoLsmUiEc Darksaber on Makerworld to be used with Prusa Slicer. import the 3mf as project into Prusa Slicer so the handle and blade will print with the connector / hole as an alternative you can also use the provided…
Based on the Standalone Touch ID Module by SnazzyLabs , this new version of a Standalone Touch ID Module provides a multitude of improvements. TODO: Add more pictures of assembly Add clear instructions around battery connection and…
For lovers and fans of the Lord of the Rings trilogy, a miniature of Gandalf. Material - PLA.
Made a medal for my brother as part of his action figure collection. Punisher model comes from somewhere on the internet as part of another design which I cut up in Fusion 360. The logo itself was re-meshed and resized, decreased faces…
💬 Summary A set of rear wall spacers designed for Logitech G920 racing pedals . These structural bumpers create a necessary gap between the pedal unit and the wall, ensuring that the connection cables are not crushed, bent, or damaged and…
Moorish Mandala Easy Print. Category: Decor
This set can help to enlarge back area of CSL pedals so you can push it onto something in case of sliding pedals. BOM: 2 x DIN912 M4x60 2 x DIN934 M4 WARNING: Do not overtighten screw, there is a danger of bending pedals metal frame.
I highly recommend having the darker color in the background for the best results. If you reach out to me on the comments I can share how to change the background for the keychain.
Replacement for pedal top of a sewing machine. (Necchi 559). After the pedal fell off a table, the top part was broken. I designed a replacement part so the safe operation of the pedal was possible again. Material: PETG or PC (The used…
Mandala pouvant être utilisé comme sous-verre ou petit tableau. Mandala which can be used as a coaster or as wall art. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Wanhao Macron Kinder…
This medal hanger clamps the band of a medal so that they can be presented nicely. It is designed for medals from the conqueror and the presented pictures are from the LoTR challenges. The LoTR pictures are from amazon . You need m3…
Caga Tió The Tió de Nadal: The Magical, Pooping Log of Catalonia In Catalonia, Spain, the heart of the holiday season isn't the sight of reindeer or sleigh bells; it’s the arrival of a simple piece of wood: the Tió de Nadal , or…
This misleading temptation to construct the pyramid with the small pyramid at the top will not work. Finding an alternative path to a solution is not hard, but maybe a little surprising. This is a good 3D visualization puzzle for…
I made a set of toppers for the Airstep Kat pedal. Letters on tom correspond to the effect controlled by each switch. Print with 2 filament changes to make the letters pop. Letters on the top stand for Booster, Modulation, eFFect, Delay,…
I found the look of the N-1 not nice enough, so I designed a few special parts. I printed this in silver pla with 3 perimeters and no infill.
Držák na medaile, vybaven otvory pro šrouby k upevnění na zeď Medal holder, equiped with mounting slot for easy installation on your wall DualHead PrusaXL recommended.
Printed with 4 Perimeters, 15% Adaptive Cubic infill with PETG. Paint supports on the hole ceiling, change Support Options “top contact z distance” to .25 and “Pattern Spacing” to 3mm for easy to remove support.
Rafael Nadal logo, earrings for tenis fans.
Had to make this Shimano tool to open and overhaul my pedals. It came out fitting and working perfectly so I would like to share it with this very helpful community.
This button is 20mm diameter for ease of reproduction and has been designed to be scaled with the use of your slicer. Go crazy with colours with the three colour change stops in the gcode, or use coloured thread. For a bit of extra zing…
I wanted a mains power switch for everything to do with my WorkBee, i.e. the WorkBee, the router, and the control PC. A switch needs to live in some sort of enclosure. This could've been a simple rectangular box with cutouts for the…
Our Wayne Dalton garage door opener button broke, which seems to be a common occurrence after a few years of service. Rather than paying for a replica, we designed our own. It fit our inner portion just fine when screwed to the wall, but…
A friend of mine needed new Face Mask Couplings for his Laerdal CPR Doll. So i re-create this piece for Home printing.
When you need more than the seat post adjustment can provide, adding blocks attached to the pedals to bridge the gap. Don't pedal on your tiptoes, print some pedal blocks that snap onto your existing Assault Fitnesss Airbike pedals.…
This is a modified version of this christmas light stand that allows these bubble lights to more easily stand upright without screws or tacks. I also added two small brackets to hold the electrical cord. It is recommended to add supports…
Standalone name tag with the name Owen. Balance is good as long as it is undisturbed. If the furniture is shaken, will likely fall. 147mm in length 53mm tall 6mm wide 34 grams
After getting our new closet organizer installed I started looking at what upgrades we could make to it. After printing some drawer pulls I was looking for a way to organize my ties. Given the limited bed size on my Ender 3 Pro I was…
A tiny (smaller than a “D” battery) multi-stage planetary gearbox powers the Tiny Toroidal Twist Fan , which definitely punches above its weight! A flywheel keeps the fan spinning between twists for a continuous breeze. Includes both a…
The Sator Square is a mystical inscription that has been found in the Christian world since the 2nd century AD. The Latin inscription SATOR AREPO TENET OPERA ROTAS can be read in any direction within the square. There are many…
This is a small key fob that I created in Fusion 360
I will upload all my Medall Creations here for you to use. Have fun If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for everyone to enjoy. If you…
This unit allows you to connect and mount your guitar pedals (with Hammond 1590 cases) within your eurorack system. The pedal case uses it's existing screws to mount to the hanger. It's tricky mounting the top screws to the eurorack…
Streuscheibe um Adalit Lampe z.B. als Warnleuchte zu nutzen. Gedruckt aus orangefarbenen, transparentem PETG.
I got tired of my Pinto Racecar not having enough Throttle Pedal to Heel-Toe, so I designed a Pedal designed loosely on the Ford Pickup Truck (1973-1979_ Pedal and made the Mounting for the Ford Pinto, Maverick, and Mustang II (Other cars…
Několik slovanských symbolů v podobě medailonů Several Slavic symbols in the form of medallions
Wall art of Patterdale Terrier
Extra hook for ladder. Supported by Romsdalen 2.0 rooftop tent ladder, but this should also fit any similar ladders. To be placed on the step of the ladder. Print settings: 0.20mm Structural Material: PETG 0.4 nozzle Infill: 25%
A 5mm spacer for an 8mm pedal rod
In my sister's apartment, there's a small flight of stairs leading into the next room – and right at the top, a dangerously low ceiling just waiting to bonk unsuspecting foreheads. Instead of going with a boring, generic caution sign, I…
no supports needed
Klasický model jen jsem mu dal barvu :D
I made this for when we attend the local high school sporting events. This is MMU compatible. It works with Billrobland 's chain model found HERE .
