Liczymy pasujące modele…
This print-in-place module uses a compliant mechanism to hold in a wago 221. This wago is used to connect a 1/16" brass rod to a EDM power supply. 6x2 mm Neodymium magnets keep the module attached to an EDM machine. EDM Is a low-force…
A Vat for EDM Want to convert your Ender 3 into an EDM machine? We did. This 3D printed vat design mounts to the bed-leveling bolts of an Ender 3. It can be filled with distilled water without leaking. Gridinity This design is gridfinity…
Remix of battery holder model by LordTalon34, modified to increase volume of battery storage and fix the battery feed issue with the original. Additionally, Skadis mount points removed. Original still has a little binding on batteries,…
The enclosure consists of 2 parts: Top and Bottom. The XH-M609 board is placed first on the bottom case, to ensure centering, then the top part is seated over until there is no gap on the sides. The assembly is secured with 4 M3x12…
Remix from original idea by OK1BT @yourmum_52499 TNX! 100W discharge test BOM 4x LiFePo4 10Ah [ 1 ] or [ 2 ] Operate with terminal ↑UP 3x short 8x M6 nuts 8x M6 cable eye 1x QC4.0 QC3.0 PD 5A 100W [ 1 ] or [ 2 ] IMPORTANT! Check if you…
Housing for the LiIon 18650 battery tester, charger, discharger. Consisting of three stl-files: Main Housing Safety Grid for the two power resistors (protects your and others hands) Three knobs for operation Printed on my MK3S+ in PLA,…
Basically the same as original: 'battery holder and low battery'. All I did was that I removed Skadis mount part from the back of the holder for people like me who just want to use it on desk or shelf.
Purpose This print clamps aluminum sheet metal in-place. Clamping force is supplied by side-mounted magnets (6x2 mm). EDM Is a low-force process, meaning that little-to-no force is needed to hold the work piece in place. Side Flushing…
I printed without supports and it built just fine. This will require several screws to be installed in the rear plastic housing. I used ½" length wood screws with a small pilot hole. The chute works really well, but must be un-installed…
Used Shapr3d to modify.
We have designed this CAD model with the intent of providing users the freedom to modify it to suit their specific 3D printers or CNC machines. As a low-force process, EDM requires minimal force to hold the electrode in position. However,…
Druckeinstellungen PLA Füllung 10% Schichthöhe 0,3mm ohne Rand mit Stützen
An EDM keychain demo for the Powercore V1 kit. This keychain can be machined out of 0.4 mm aluminum on a DIY EDM machine. The EDMWeb parameters are: Travel Z: 7 mm Start Z: 0 mm Cut Start Z: -4 mm Tool Diameter: 1.5 mm Travel Speed: 1000…
1 x 1 Gridfinity holder for brass electrodes. Settings: PLA or ASA 0.12 - 0.3 mm layers 10% Infill 2 - 3 Walls For more information about desktop EDM check out rackrobo.io
I was looking for a way to store my coin cells in a neat, organized, and safe way. I found this model on Thingiverse, but I wanted to make one that is shorter in height and fits my drawers vertically. I also needed it for many other cell…
1 x 1 Gridfinity storage for EDM electrode holders/cartridges. Contains up to four 2x6 mm neodymium magnets. Settings: PLA or ASA 0.12 - 0.3 mm layers 10% Infill 2 - 3 Walls For more information about desktop EDM check out rackrobo.io
Customizable soldering picks made by combining 3D printing with desktop electrical discharge machining. Settings: PLA or ASA 0.12 - 0.3 mm layers 10% Infill 2 - 3 Walls Required Parts: Solder Pick Handle 2x - 3D Printed Solder Pick x1 -…
2 x 2 Gridfinity holder for stock material. There are a dozen slots, allowing for storage of up to 12 pieces of stock material. Each slot is 2 mm wide. Settings: PLA or ASA 0.12 - 0.3 mm layers 10% Infill 2 - 3 Walls For more information…
Thanks to @Mhodder (thingiverse) for the original model AND posting STEP files so I could easily edit them!!! I made the following changes to dramatically reduce the BOM and assembly time: No soldering needed! Just seat the controller box…
What you see is what you get. :-) Data: simple and universal box for everything Daten: einfache und universell nutzbare Box. Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 20% Filament: PLA Category:…
Einfache Gussform von einem Dala Pferd. Gedruckt in Tpu
0.4 0.2 Magnet: 1 piece 7X3MM, 2 pieces 10X3MM and two long self-tapping screws included in the original BAMBU X1C packaging
Parallel Board for ISDT Discharger with 6 XT60 Ports. To discharge multiple LiPo batteries at the same time when the weather or plans change. I got two ISDT dischargers to discharge multiple batches of batteries at once. Solder all…
Alle konvexe Vielflächner mit unterschiedlichen gleichseitigen Vielecken als Flächen sind archimedische Körper. Es gibt 13 Mögliche davon. Dieser mathematische Gegebenheit entdeckte der berümte Erfinder Archimedes ein echtes Genie seiner…
Original plate (probably abs) cracked in many places from chemical damage (wd-40 and brake cleaner) I found it under DCH-009 name on aliexpress. So it may fit many more folding ebikes. Printed in PETg, require supports, 3 walls 20%…
I did not do this design. I found it on Thingiverse, and it was originally for hanging a longboard on the wall, which I printed some of them for, but I was looking for a latch hook to hold up the side discharge on my mower to keep it out…
This is a simple hook I created that will hold up the discharge chute on a Ryobi RM480e riding mower when it is being stored to prevent the chute from taking up excessive space. It fits into the slot next to the control panel, and will…
This is a chute to redirect the discharge of brass from the Rollsizer brass processor in a downward direction into a pail or other collector. Prototype 3 has thicker walls and is adapted for 3" round discharge hose to prevent spillage.
A case that holds a lipo 18650 battery, and an IC that deals with the charging/discharging of it. The IC should take care of charging he battery, through the microUSB port on it. It also should track your 18650's Charge and not let it…
1.The closing angle is 0 degrees, and the opening angle is 180 degrees as shown in the figure. 2.This design is suitable for converting voron or vzbot into trident. 3.I have provided the settings for the nozzle cleaning and waste…
This 20V Dewalt battery connector includes an integrated over-discharge protection module that prevents the battery voltage from dropping too low. This protection circuit is rated up to 20amps and the cutoff voltage when the battery…
A DIY capacitor discharge tool , providing a secure and convenient way to safely discharge capacitors. The enclosure is designed to use M12 banana binding post sockets which are compatible with most multimeter probes, allowing you to…
A simple plug to maintain equalized pressure in waste Coleman-style 1lb propane tanks. NOTE: Installing this cap may or may not allow you to dispose of these waste items in your normal disposal stream. Consult your local waste authority.
For more information see my blog post about this setup. A sleeve that you are meant to mount the 21700 cell holders to (I used VHS tape) that slides over the 18650 cell holders Triangle pieces that are meant to be mounted to the back of…
This is a panel mount interface for a USB-C PD battery charge/discharge module. 140W 2-6S Lithium Battery Charging Board Bidirectional Fast Charging Module With Automatic Temperature Control Function IP2366
Valknut Wotansknoten Anhänger der nordischen Mythologie
Da stampare con la scritta verso il basso Layer 0.2 Materiale PLA To be printed with the writing facing down Layer 0.2 PLA material
Added a cap for the H7 bulb, to prevent it from damage! Added two versions with a slot for a voltmeter. Links below! I used this H7 car bulb for some months as LiPo Discharger or Killer. Since it works pretty well I decided to design a…
This is a clean/dirty indicator for the dish washer. The indicator will cover the START button. The 3 parts assembled together and stick to the dishwasher with Double-sided tape. The cover is printed on the edge with support. Other parts…
This is my first upload so any and all comments are welcomed. I designed this in Inventor. If you would like the .ipt files, please reach out. I have ran about half a dozen loads of laundry through it and it seems to be working as…
aa battery holder with discharged battery holder
a cable support for the awesome "BIQU H2 Extruder Halterung für Ender 6" from wendischb for the original Cable tube the awesome BIQU H2 Extruder Halterung für Ender 6" from wendischb https://www.thingiverse.com/thing:4762042 Print…
Für zweifarbige oder mehrfarbige 3D-Modelle benötigt man beide oder mehrere Dateien extra. Das obere Bild wird auf das untere darauf gesetzt oder eingebettet. Nit einem normalen Drucker muss jede Farbe einzeln gedruckt werden um die Teile…
Telecharger tous les fichiers: https://www.thingiverse.com/thing:4962498/zip Boitier en 2 parties pour accueillir le Kit Cyrob CP0079 vendu sur Ebay Vous aurez besoin: 1 kit à assembler :…
WOW Toys Harvey Harvester discharge pipe, which "disappeared" in my children's toys :-) The picture shows the bales from Ahzz https://www.printables.com/de/model/18417-hay-bale-v2-wow-toys-harvey-harverster-kombajn (Hay Bale v2 (WOW Toys…
Spare wheels for washmachine Bosch. After 8Y the original one are already too much worn-out and these from ABS (due to temperature) works pretty well. Category: Kitchen & Dining
The design ideia is from emeraldmeadows ( https://www.thingiverse.com/thing:2419239 ) i just made some minor changes to the concept. The holes in the box and lid are tight enough to use a tap. I use M3 screws for the box and M2.5 for…
Leggermente modificato per adattarsi alle proprie esigenze, piu basso e per deischetti di 55cm di diametro
A container for spectral discharge tubes that holds six tubes that are approximately 26 cm long. The text on the lid is not part of the model, add that using your slicer if you want it.
Wasserrad über ein Schneckengetriebe an eine archimedische Schraube gekoppelt. Das Konstrukt wird über ein Solarpanel angetrieben. Die Schnecke habe ich mit Olivenöl geschmiert - jetzt läuft das Konstrukt ganz flüssig... Benötigt werden…
A larger copy of the original EDM Vat used on the Rack Robotics. Uses normal sized Gridfinity. This has not been tested, may be a total pile of junk.
This is a sign for your plants in the garden.
I found sometimes my lipo batteries, took longer to charge when the cells were not well balanced. The charger repeatedly puts power into both cells then drains some current out of the cell with a higher voltage to try and reduce the…
Portadischetti trucco. Rispetto alla foto ho migliorato il disegno rendendo le superfici più tonde nella versione del file pubblicato. E' un porta dischetti per rimuovere il trucco dal viso, si possono collocare i dischetti di tipo grande…
Ständer mit Platz und Durchführung für einen LED-Strip für das Periodensystem der Elemente von Methodisch inkorrekt! / eMpirie https://empirie.de/products/periodensystem
I produced this pipe fitting to connect the high pressure discharge hose to the boiler discharge hose. Kombi tahliye hortumuna yüksek basınç tahliye hortumunu bağlamak için çatallı bu boru ekleme parçasını ürettim.
This model of a discharged battery creatively signifies a depleted battery with a lightning bolt symbol in the center, suggesting energy or power.
longcase clock, tallcase clock, altmodische Uhr, Standuhr made with Autodesk Inventor Pro
Dear Gentlemen, I took the great idea of Mr. Timo, thanks to share it, please have a look of his item https://www.thingiverse.com/thing:4318301 and I made a new design based on my needs, the parts are not interchangeable with his project,…
I live in Denver where it is very dry in the winter (<20% RH). I grew tired of discharging static through the printer and resetting it. This was particularly frustrating when it happened mid-print while changing filament colors. So I…
Created from original spare parts. Manufactured and tested.
Because the splashing annoyed me, i've built this small fix. The Version you see in the picture is slightly too long / mismatches the chamfer, this is fixed in the current 3mf file.
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.238…
This is a simple mounting tab for 1 or more of the ZB206+ cell discharger modules. It has a pair of hex recesses that allow the ~4.5mm hex standoffs on the bottom of the module to press into. Then the tab can be screwed or glued down to a…
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.236…
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
This includes (effectively) 5 different models. This includes: One normal discharge profile, including voltage and internal resistance One zero-degrees Celsius discharge profile, including voltage and internal resistance A rudimentary…
I made this case for charging and discharging 3.7v Lithium Cells. During one of those actions it display's the current and the voltage. With the switch you can select charge/load(discharge). On the right side is the input power, and on…
Hello, my Marui battery discharger case was broken, i made the new one in PETG, we can use also ad a resistor load, inside there is a ceramic resistor 20 W 30ohm , but you can change it as per your needs verifying the necessary space. The…
Designed for this device: https://s.click.aliexpress.com/e/_c3LWYT0f This enclosure is made specifically for a Mini Discharge Load Resistor, providing reliable protection while maintaining full functionality. The compact two-piece design…
This is an enclosure for this capacitor discharger https://s.click.aliexpress.com/e/_c2zsPlld It consists of two parts that snap together. Remove the heatshrink tubing from the board, insert the board in the bottom part and snap the top.…
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.233…
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
All the 3D printable files for this resistor load bank build to externally discharge LiPo batteries. Shortens the discharge time from hours to minutes! Instructable on the build posted here:…
Coppia di Cerniere per Coperchio protezione Polvere per Giradischi Toshiba SR-V12, sicuramente può adattarsi anche ad altri modelli simili. Manca di inserire una Vite o un Perno e volendo anche la Molla. Io lo lasciate senza. Appena…
Mám kuchyň od Oresi, již nějaký rok starou. Za tu dobu jsem měnil myčku a také původní sokl (dřevotříska, vysoká asi 10cm). Jenže, nová myčka a nový sokl si úplně nesedli. Při úklidu se sokl propadával a nebylo ho jak/kde uchytit. Tak…
Made for this model: https://s.click.aliexpress.com/e/_c3KlQS8R This custom 3D-printed case is designed to provide a comfortable grip and improved security while discharging capacitors.
I designed this small tool to discharge trapped air from automatic air dischargers. When using this tool, a pneumatic fitting with hose can be used, to guide the water into a bucket or bottle. Small hardware is needed to finish the print.…
Replacement base for the DF64E Coffee Mill. Intended to reduce fines, holdover, and overall messiness of the grind.
This is a grommet to hold the discharge tube into the metal plate of the Miele CM5100 Espresso Machine. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .1 Infill: 100 Category: Kitchen & Dining
I wanted a quick and dirty way to mount my A-Torch tester on the wall. I had already printed a great case for it. Firstly tried double sided tape but the heat of the unit softened the double sided tape and made it fall off. I used 6G…
Support: build plate only Material: PETG Infill: 15% (for mass)
Print in PETG or ABS (exterior use), fix with M3 screw STL lengh : 250 mm, I've the *f3d file to modify the lengh
Made for the module in the picture. This 3D-printed custom enclosure provides a compact, protective and practical housing while keeping all the main functions easily accessible.
This 20V Dewalt battery connector includes an integrated over-discharge protection module that prevents the battery voltage from dropping too low. This protection circuit is rated up to 20amps and the cutoff voltage when the battery…
For more information see my blog post about this setup. A sleeve that you are meant to mount the 21700 cell holders to (I used VHS tape) that slides over the 18650 cell holders Triangle pieces that are meant to be mounted to the back of…
longcase clock, tallcase clock, altmodische Uhr, Standuhr made with Autodesk Inventor Pro
I wanted a quick and dirty way to mount my A-Torch tester on the wall. I had already printed a great case for it. Firstly tried double sided tape but the heat of the unit softened the double sided tape and made it fall off. I used 6G…
E.T. Head the Extra-Terrestrial / Außerirdischer
Semplice porta dischetti in cotone ovali, di quelli che vendono nei supermercati nella misura standard. Oval makeup pad holder Simple oval cotton pad holder, the kind sold in supermarkets in standard sizes.
E.T. the Extra-Terrestrial Statue / Außerirdischer
This design is not mine it is windischb's but it seems like hes disappeared from this website and i could not find him anywhere else. credit to him and i slightly tweaked the extruder mount to be more sturdy. if someone can find him lmk…
Porta dischetti ovali. 92.8x66.5 misure del dischetto Misure del porta dischetti L-75.5 H-200 Lungh-100.6 Lasciate un like e seguite perfavore. Grazie in anticipo
Adattatore per installare dischi da 2.5 in alloggiamenti da 3.5 ho caricato due versioni una a un disco e una a due dischi Category: DIY
Dalla necessità di ordine e pulizia nasce questo pratico e igienico dispenser. Dotato di una parte fissa da attaccare al muro con del pratico biadesivo 3M, e una parte mobile, da poter togliere all'occorrenza per operazioni di pulizia.
