P
Printables
3x4 Downspout end cover
no special instructions. I recommend having the base be solid infill but there's no reason it shouldn't work if its not.
Wyniki wyszukiwania: downspout
Liczymy pasujące modele…
P
Printables
4x4x3 Downspout Adapter Extender
I needed to extend the connection between the gutters and the drainage system as the Prinsco 4x4x3 adapter wasn't quite tall enough to create a sealed connection. Hacked this together in TinkerCAD quickly. Am sure there's a host of…
P
Printables
Doweled downspout pipe for 6 inch half round gutter to hand beat your own doweled 4"(3.84375") starter pipes (outlet(s))
(NOTE: PLEASE REFER TO LAST PICTURE FOR CORRECT SIZING SETTINGS BEFORE PRINTING) make your own sheetmetal half round gutter downspout starter pipes with this jig. this jig is designed for you to stuff a piece of 11.7" paper or pipe…
P
Printables
Gutter downspout clip
The clip to my gutter downspout broke and Lowe's didn't have it in stock so I did my best to replicate it. It's not perfect but it gets the job done. I printed in PLA + but PETG or better is probably recommended to play it safe with the…
P
Printables
Hydroponic NFT Downspout Horizontal Bracket 4x3
Bracket that holds 4x3 vinyl downspout. Remixed version for larger downspout.
P
Printables
flat 3.875" outlet for hand beating your own outlets for downspouts
here is a basic flat pipe for hand beating your own outlets for downspouts. make your piece height 2.875" to flange .375" and length 3.84375" x pie + your desired pipe lock size(3/8 / 1/4" should work fine) and form the pipe and stuff…
P
Printables
Downspout Extension Stake
We were having issues with our downspout extension being disturbed by our pups when they would play outside. So I decided to model this to secure it to the ground. The model is very easy to print. Brim is recommended. 😊 Let me know if you…
P
Printables
Underground downspout parts
If you own the underground downspout kits from waterproof.com, you know how easily they break. Usually the little "ears" on the center posts break, then you mutilate the cap in your mower. I designed these replacement parts based on the…
P
Printables
Downspout gutter diverter for rain barrel
Update 2024-05-15: There is a new version that includes two side ramps for additional rainwater collection. It's available for the 2"x3" and 2 5/8" × 2 5/8" sizes so far. Update 2025-03-04: Added a “bare” outlet adapter to use as a base…
P
Printables
Gutter Downspout Band/Clip/Mount/bracket for 2 x 3 Inch downspouts
Mounting band/clip for 2 x 3 inch gutter downspouts. Pretty self explanatory to print and use. No supports needed. I made these because I could not get anything similar in the color I wanted… only white :-( I also really hate the look of…
P
Printables
Downspout elbow B-style rectangular to rounded
B-style downspout adapter for 3" x 2" rectangular downspout to rounded 3" x 2" extension.
P
Printables
Quick and Dirty Rain Downspout Trash Diverter
This is a quick and dirty trash diverter for a downspout. The initial version takes a 2"x3" input, and outputs to 4" rounds. As with all 3D prints you use outside, you either need filament that can handle UV or you need to paint it with…
P
Printables
Dividers for 2.5" downspout glass rod storage
If you've built storage racks out of 2.5" vinyl downspout like I have, but want smaller compartments, this divider is for you. I recommend attaching it inside with a little piece of double-sided tape so that it doesn't come out when you…
P
Printables
Downspout Helper
The ground settled and opened a gap between my rain downspout and the drain pipe. I couldn't find anything at the store that would work to fix it. And I didn't want to dig up and reposition the drain pipe, so what to do? Print the…
P
Printables
4-compartment divider for 2.5" downspout glass storage racks
Flameworkers, lampworkers: If you've built storage racks out of 2.5" vinyl downspout like I have, but want smaller compartments, this divider is for you. I recommend attaching it inside with a little piece of double-sided tape so that it…
P
Printables
Downspout collar, diameter: 100mm
When installing a rain collector, I had to cut the gutter. To make the cut piece of gutter more secure, I designed this downspout collar. The diameter of the gutter is 100mm. I print mine in PET-G and add some 6mm stainless steel…
P
Printables
Adapter: French Drain Pipe to Gutter Downspout
This adapter allows 4" corrugated french drain pipe attachment to standard 3"x4" gutter downspout.
P
Printables
Down Spout Cover / Gutter cover / Downspout cover
I had my gutters replaced. As part of that, they did not hookup a specific downspout. That was a good thing, until I realized I had a really great hole chilling out in the front of my house. This was a seriously simple design. I just…
P
Printables
Downspout Leaf Separator - DN100 - Silent Version - High Flow
Welcome to my first model in the Printables Store. My model is a leaf separator that filters your rainwater and serves you the leaves in a bucket. Once installed, you don't have to worry about anything else. After 1,5 years of tesing I…
P
Printables
3" x 2" downspout to 4" pipe adapter
3d printable downspout adapter that slips over the downspout and can snap into 4" corrugated drainage pipe, or sit in a 4" non-corrugated PVC pipe. These adapters are usually available at the hardware store and made of durable HDPE that…
P
Printables
3"x2" downspout to 4" flex drain to 4" PVC drain
This is not intended to be a long term solution, the print will quickly degrade in the elements. However - if you need a quick fix to hold you over until the end of winter, or until the ground thaws enough for digging, this print should…
P
Printables
Wyze Camera Downspout Mounting System
Wyze Outdoor/V1/V2/V3/V4/Duo Pan Cam downspout mount modular system. Can find model on Tinkercad, https://www.tinkercad.com/things/9uemeJSoYyR-wyze-outdoor-drain-mount-wcorner-rev4
P
Printables
Downspout Grill
Downspout Grill Description Simple downspout grill. Material Support me by using the affiliate links below Filament ABS Filament https://amzn.to/4gpUqB6 ASA Filament https://amzn.to/3EoQpzC Model Onshape…
P
Printables
Downspout Guard
You only need to print the "Drill jig" and “Mesh cut template” parts once. You'll use them as tools. For each downspout onto which you want to attach one of these, you need 2 parts, one of each collar (inner & outer). Installation…
P
Printables
Dividers for 3x2" downspout glass storage
Fits in an opening no less than 65 mm x 47 mm, deliberately undersized due to the rounded corners of these downspouts. As with all my dividers, these will work better if you (lightly) secure them inside each downspout so they don't get…
P
Printables
Downspout Leaf Catcher
Remix of https://www.thingiverse.com/thing:2965677 Wanted a leaf catcher to put above my rain barrels to keep debris from getting in the barrels. I wasn't happy with the existing designs so I made my own. Chopped up the model with…
P
Printables
Downspout Watermill
Something fun for when it rains. Fits a 100mm downspout. Needs a 8mm rod.
P
Printables
Downspout end cap with hole
I used original model, but printed with a .8 nozzel. Still fit nicely and should work well with a little sealant. I added a hole for threaded 3/4in sched 40 pvc pipe. Use a male and female adapter with a #19 o-ring for a nice seal.
P
Printables
Rain-Chain Hanger for Inside of Downspout
This is a hanger and hook for a house gutter downspout so that a rain-chain can be hung from it. Print off this model and drop it into the downspout from above to give your rain-chain a proper attachment point.
P
Printables
3x4 Downspout end cover
no special instructions. I recommend having the base be solid infill but there's no reason it shouldn't work if its not.
P
Printables
4-1/4" Downspout Stake / Stand
No supports are required, you can use a brim to ensure adhesion to the plate, but I found it to be fine without a brim.
P
Printables
Flex Grate Downspout Filter Connector
Converts the 4" discharge of the Flex Grate vinyl downspout filter to a 2.9" diameter so the discharge will fit into a 3" diameter drain. Used PETG so it's more resistant to the elements. Print Settings Printer Brand: Prusa Printer: I3…
P
Printables
NFT downspout elbow Cap with Threads
So i have been making some NFT Hydroponics and was looking for a way to drain the NFT in a closed loop system without the water pooling up. So i decided I would buy a downspout elbow and then add this cover with a threaded end so I can…
P
Printables
Gutter Downspout clip
When i mow my downspouts keep falling down. So i created these clips to help hold them up while i mow. Print in asa or petg.
P
Printables
Downspout/Gutter Stay - Keep the Grass Alive!
I was tired of buying these from the local hardware garden center and realized I had a 3D printer at home. A simple design, yet great for keeping those hinged downspouts off the grass and avoiding those dead spots on your lawn. The spike…
P
Printables
4x4x3 Downspout Adapter Extender
I needed to extend the connection between the gutters and the drainage system as the Prinsco 4x4x3 adapter wasn't quite tall enough to create a sealed connection. Hacked this together in TinkerCAD quickly. Am sure there's a host of…
P
Printables
Dragonfish spout for 2x3 inch Gutter downspout
Working on house and had to remove the 1st floor gutters to replace porch banding and to work on porch columns. Extended 2nd floor gutter downspouts beyond 1st floor roof and the ends looked ratty. Remixed maxxkao's dragonfish to make…
P
Printables
Downspout 2 pool 2 inch hose
I needed a way to hook up a standard 2 inch pool hose to a rain gutter to capture water to be used to help add water to the pool
P
Printables
Customizable Downspout-to-Drain Adapter
Customizable pipe adapter for joining pipes of different dimensions. Designed for non-pressurized applications such as gutter systems. I use it to connect modern standard sheet-metal downspouts to the older, smaller plastic drain pipes…
P
Printables
Downspout anchor post - shorter
I shortened the stake part of this thing so it would fit on my ender 3 bed without rotating 45 degrees Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: Inland PETG…
P
Printables
Gutter Downspout Band/Clip/Mount/bracket for 2 x 3 Inch downspouts -- extension
I printed in PLA about 1 year ago, 30% with three walls … still holding up! This thing grips TIGHT, be careful not to bend your downspout. I personally sanded the inside to make it a little easier to slide on.
P
Printables
Reolink Trackmix Downspout Mount
Use large zipties to corner mount Reolink Trackmix to a gutter downspout. Bracket fits a downspout that is 90mm x 60mm. These are an example of what I used: https://a.co/d/54WsKCu
P
Printables
Downspout ground pipe grommet
This is a downspout grommet for square downspout and flex tubing, as available at Home Depot Canada. The provided fitment is a real sloppy so I made a down and dirty grommet. Without the grommet, junk might get into the ground drain.…
P
Printables
Downspout Ground Support - 2 Versions
🍁 Interchangeable Downspout Ground Support – Printable Design (Two Versions) Protect your lawn and landscape with this versatile, 3D-printable downspout ground support system! Designed with an interchangeable connector, this support…
P
Printables
Downspout Anchor
I needed more width on my downspout supports (Anchors) to get a flat fit and not pinch the square downspout anchors. The photos show exactly what they do. I printed these at 10% infill with 5 layers top and bottom and sides. I used Orca…
P
Printables
Doweled downspout pipe for 6 inch half round gutter to hand beat your own doweled 4"(3.84375") starter pipes (outlet(s))
(NOTE: PLEASE REFER TO LAST PICTURE FOR CORRECT SIZING SETTINGS BEFORE PRINTING) make your own sheetmetal half round gutter downspout starter pipes with this jig. this jig is designed for you to stuff a piece of 11.7" paper or pipe…
P
Printables
Downspout Extender
Slip this on to the bottom of your downspout to kick the water out further and minimize splash back. Attached file is for a 4x3 (inches) downspout with a 8 inch length. The model is parametric and you can edit it for your downspout size:…
P
Printables
Downspout Needle Filter
Most of the downspout filters I've seen other people post seem to work on leaves, not fir needles. We live in an area filled with fir trees, and in the wind, they blow off the trees and on my deck. Then when it rains, they fall between my…
P
Printables
Remix of RV Downspout
First, I cannot thank steriku enough for putting this out there - with my limited tools (Tinkercad), I really would not have been able to do this. My camper lost it's downspout, and I wanted to replace it with something better - and this…
P
Printables
90º Connector for Gutter Downspout
I accidentally bought an extender for my gutter downspout that is meant to connect to a "wide" or "flat" oriented gutter downspout, but I liked the overall design of the extender (it flips up to move out of the way for mowing) so designed…
P
Printables
Downspout adapter - round and rectangle to round and rectangle
i used PM-ME's file as template. EXCELLENT WORK !! I created three separate files, ROUND to RECTANGLE, ROUND TO ROUND, and RECTANGLE to RECTANGLE. the attadhed FUSION files are rudimentary templates. you can view PM ME's file and see how…
P
Printables
Coanda downspout water diverter
Self cleaning Leaf filter / Rain water catcher for downspout gutter, that use Coanda effect Original design by NeedItMakeIt . I redo it with print in one part (to get rid of the plexiglass and simplify joint and assembly), Spiral angle is…
P
Printables
Offset adapter for French Drain Man Downspout Cleanout with Leaf Filter
Offset adapter for French Drain Man Downspout Cleanout with Leaf Filter. My general contractor screwed up and a downspout was not properly aligned with a buried drain embedded in concrete. I designed and printed this adapter to mitigate…
P
Printables
Downspout adapter - 2x3" to 3" S&D/DWV
An adapter from a 2x3" rectangular downspout to a 3" DWV/S&D (Sewer and drain) pipe. This being the USA, a "2x3" downspout is 2.25" by 3.25" and a 3" S&D pipe is really 3.25" in diameter. Includes FreeCAD model, .stl file and .3mf file…
P
Printables
Label Holder - Hydroponic Downspout
1/6/26 - UPDATE - Loaded a new Base and Lid STL file since folks have had issue with trying to get the Lid piece on to the Base. (By folks, I just mean me.) I developed and constructed an eb and flow, nft, gravity fed hydroponics system…
P
Printables
Downspout Transition to 2 Inch PVC
I made these pieces to better connect to rain barrels on my home. They allow standard PVC fittings to connect to standard downspouts. Printed here in PET-G with 4 perimeters
P
Printables
Gutter downspout clip
The clip to my gutter downspout broke and Lowe's didn't have it in stock so I did my best to replicate it. It's not perfect but it gets the job done. I printed in PLA + but PETG or better is probably recommended to play it safe with the…
P
Printables
Hydroponic NFT Downspout Horizontal Bracket 4x3
Bracket that holds 4x3 vinyl downspout. Remixed version for larger downspout.
P
Printables
flat 3.875" outlet for hand beating your own outlets for downspouts
here is a basic flat pipe for hand beating your own outlets for downspouts. make your piece height 2.875" to flange .375" and length 3.84375" x pie + your desired pipe lock size(3/8 / 1/4" should work fine) and form the pipe and stuff…
P
Printables
Plastic 2-1/2" x 2-1/2" Square Downspout Mounting Bracket
These used to be available at my local Home Depot....used to. I just made my own.
P
Printables
Rainwater Collector for 120 mm Downspout
The inlet fits a 120 mm diameter rain gutter downspout. Inside the diverter, the internal geometry guides part of the flowing rainwater toward the side outlet, while the rest continues downward through the main pipe. The side outlet…
P
Printables
Downspout Extension Stake
We were having issues with our downspout extension being disturbed by our pups when they would play outside. So I decided to model this to secure it to the ground. The model is very easy to print. Brim is recommended. 😊 Let me know if you…
P
Printables
Gutter Downspout Diffuser
This is a remix I did for a downspout water diffuser that fits the downspouts on my house that measure 4.25x2.875in. I am sure that is not the standard size and since I had a hard time finding this size I just modified the size based on…
P
Printables
Greenhouse Gutter Downspout (25mm)
Downspout adapter for 25mm greenhouse gutters (standard on Halls, Magnum, and Universal greenhouses) to connect to a 19mm pipe. The height of the gutter is 8mm then tapered over to a total of 12mm. Print on end with supports enabled. As…
P
Printables
Downspout Filter replacement filter / grate
This is a replacement filter / grate for a InvisaFlow 4400 Flex Grate Downspout Filter I purchased from Amazon.com: http://smile.amazon.com/gp/product/B0061Q5DW2/ref=oh\_aui\_detailpage\_o09\_s00?ie=UTF8&psc=1 Our dog ate the original…
P
Printables
US downspout to garden hose adapter (for diversion to rain barrel, etc.)
This remix allows diversion of water from a gutter downspout (common US 2in x 3in size) to a garden hose (3/4in GHT hose fitting). Great for channeling water in a different direction, to a rain collection barrel, or a garden. It maintains…
P
Printables
Underground downspout parts
If you own the underground downspout kits from waterproof.com, you know how easily they break. Usually the little "ears" on the center posts break, then you mutilate the cap in your mower. I designed these replacement parts based on the…
P
Printables
Flexible downspout to 3" PVC connector
Simple adapter to connect a flexible downspout to a 3" schedule 40 PVC connector. I added holes to the side in case you want to use rivets to make a more solid connection but depending on your use it's not required. You can also add some…
P
Printables
Gutter downspout drain extension rectangular
Extension for 3" x 4" rectangular gutter drain. 9" total length, generally subtract an inch for mounting. Attaches with zip-tie to hole on top of downspout, or to another extension via a similar procedure. Printed with translucent PETG…
P
Printables
Gutter Screen for 3"x4" Downspout
This is a gutter cap and removable screen for 3"x4" gutter downspout. Attach cap using (2) #8 x 3/4" Self-Tapping White Head Sheet Metal Screws. Design: Fusion360 Material: PETG, PLA+, ABS Color: White (brown or other to match gutter…
P
Printables
3x4 Downspout Gutter Offset
Gutter offset / adapter I designed in Fusion. Offsets 45 degrees. I'll update the model with new pictures when the wood trim is finished, and the offset can be fully mounted. Gutters are 3x4". I melted the supports in acetone until I got…
P
Printables
3x4in Downspout Bracket
I couldn't find any 3d printed brackets that fit my beefy 3x4 downspouts so I was forced to create some. They are a snug fit on my downspout but that is on purpose. There are two versions for your printing pleasure. No supports required.…
P
Printables
Leaf catcher for 70- and 80-mm PVC downspouts
I needed leaf guards for five of our 70mm rain pipes, but I could only find (rather expensive) models designed for 80mm PVC rain pipes, and using two 70-to-80mm reducers per pipe would have been quite costly. Besides, it wouldn’t have…
P
Printables
3" Downspout to Garden hose adapter
Adapts a 3" downspout to a garden hose fitting. Fitting is a separate piece to aid in printing, so it will need to be glued in with an adhesive or sealant.
P
Printables
Ring Stick Up Cam Downspout Mount
Strap your Ring stick up cam to your downspout. Use 2 M3 screws/nuts or add some threaded inserts for a more secure attachment. Then use some hose clamps to strap it to your downspout or a pipe somewhere. I used this as an excuse to…
P
Printables
Downspout Leaf Diverter
Just a simple trash diverter for a downspout. Print Settings Printer: Micromake D1 Rafts: No Supports: No Resolution: 0.33 or as large as your nozzle allows Infill: Solid via 2.0 mm shells (5 shells with a 0.4 nozzle) Category: Outdoor &…
P
Printables
RV Camper Long Downspout
One of my camper downspouts was draining directly onto the tip-out awning and causing it to fill with water and sag. This spout takes the water further along the trailer and dumps it off the side. Print Settings Printer Brand: Creality…
P
Printables
Downspout cap for DIY aquaponics system
f you are interested in creating a cheap DIY planter for various reasons (my need was for a homemade aquaponics system), you can use a combination of the plastic downspout found in this link along with this 3d design to function as a cap…
P
Printables
Downspout accessories
Some parts I needed to disconnect my house's rainwater runoff from the city sewer line. Designed for printing with a 0.6mm nozzle, but other sizes should work too.
P
Printables
Rain Water Downspout Extender
The rain water downspout extender can be flipped up to not interfere with the lawn mower, then flipped down again when done mowing. The extender 3D model was created using FreeCAD 0.20 --- https://NDAcademy.FoxPing.com => 3D Printing =>…
P
Printables
Gutter or Downspout Stake for Yard
No supports are required. Use a brim to ensure adhesion of the thin contact profile of the design.
P
Printables
2x3x4 Downspout Adapter
2" x 3" downspout adapter to 4" pvc pipe. Two variants: Bell end goes over normal pvc Straight end goes into the bell of another pipe Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20+%…
P
Printables
Downspout to Downspout Adapter
2x3 over gutter to gutter insert. Both ends are quite tight. Slight offset and straight models available. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0.15 Infill: 15-20% Filament: Generic PETG…
P
Printables
4x3 Gutter Downspout End Cap
4" by 3" gutter downspouts from Lowes are great if you're looking for hydroponic nutrient film technique (NFT) growing channels. However, it comes with the challenge of closing off one of the ends. This is my solution. A very simple end…
P
Printables
Wyze Cam V3 Clamp Mount for 3" Downspout
I combined LuckyResistor's Snap-in Pipe Clamp with a basic Wyzecam V3 mount so that I could mount my Wyze Cam V3 on a 3 inch diameter downspout without drilling into anything. First time “designing” anything. Used Tinkercad and combined…
P
Printables
Rain Barrel Downspout Diverter (3x3)
I needed a downspout diverter for a few rain barrels I was installing. I found the original great design, but it didn't fit my 3"x3" downspout pipes, so I remixed it. Thanks to the original creator for the original design!! Print Settings…
P
Printables
downspout drain cover 4-inch
This is a very easy print. I used a 0.8 nozzle and PLA but I am unsure how long this will last in the sunlight. I will not be surprised if I have to find a filament better suited for outdoors later. I am in the USA and this cover fits…
P
Printables
4x3in Downspout gutter adapter!
I live in Tampa, FL, and Hurricane Ian is about to rock us.. well.. Like a Hurricane. To deal with the deluge of water I made a tapered adapter to take the 4x3in downspout to a 3in flexible backwash hose for a pool (exact one here…
P
Printables
2x3 Downspout Strap
Remix of Gutter Downspout Mount Set by wnnorton https://www.thingiverse.com/thing:2743708Gutter Downspout Mount Set I'm not sure what downspouts wnnorton designed mounts for, but none seem to fit the 2x3" downspouts that are common in the…
P
Printables
Downspout Leaf Filter
I created this out of frustration with existing downspout filters. Most don't work well at all and the ones that do are very expensive. This is in 3 parts: 1.) Splashinator - This piece is optional, but from my 2nd story gutter, the water…
P
Printables
Gutter/Downspout Drain Grate/Cover (Parametric)
** Updated April, 2022 All of the code/files are contained within GitHub - GutterDrainGrate I would recommend either pulling via git: ```shell git clone https://github.com/jshessen/GutterDrainGrate.git ``` or downloading the repo as a zip…
P
Printables
Rain Gutter Downspout Harvester
Install inline in downspout to harvest rain water for use in gardening or filling water bucket for animals to drink. Two models, depending on hose size. ½" tubing or 5/8" garden hose slip onto tap. Made with PETG. 15% infill, supports…