Liczymy pasujące modele…
The Sunlu S1 and eSun eBox unfortunately don't come with a built-in humidity gauge. But there are cheap mini digital hygrometer/thermometers available in many shops which allows you to easily add one yourself. My design consists of a base…
Wydruk około 0,99 €–1,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made this model because I’m really pretty picky with the type of paper I use for my notebooks and sketchbooks so I made the Hexbook one with interchangeable paper. no print support needed. Print the cover 2x, spine 1x, clip 4x. The…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dust filters are especially useful if you have some dusty spools of filament that you want to print from or if you have pets at home. It protects your nozzle from clogging. This model prints without supports (even the nose was printed…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
To be sure that the print stick to the bed I added a raft
Wydruk około 1,75 €–2,14 € nettoWstępna wycena jednego wariantu
Matching wall shelf for the Toniebox for my Tonie honeycombs: https://www.printables.com/de/model/355564-shelf-for-tonie-figures-regal-fur-tonie-figuren-to The honeycomb shelf is invisibly attached to the wall with the base plate. The…
Wydruk około 4,88 €–5,97 € nettoWstępna wycena jednego wariantu
🫧🪸🐚 Ahh… Bikini Bottom: Ze Home of Beloved Aquatic Cgeatures 🧽𓇼🐙 🐿 🦀 There are plenty of pineapples, moais and rocks under the sea—you can find those anywhere. But… have you been to the actual Bikini Bottom? Print this whimsical…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
This is an improved guide tube for the eSun eBox filament dryer. The original one is made with rubber and can not hold the guide TPFE tube firmly. I break one, thus I create a enhanced version of it.
Wydruk około 0,32 €–0,40 € nettoWstępna wycena jednego wariantu
Ablagebox 2.0 für Meiho Angelbox
Wydruk około 7,57 €–9,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Flexi toy Patrick Star from the SpongeBob SquarePants cartoon series. It has a movable head. The arms legs and waist (if starfish actually have anything like that). The model is adapted for easy printing with a 0.4mm nozzle with a layer…
Wydruk około 1,23 €–1,50 € nettoWstępna wycena jednego wariantu
A cheaper and simpler version of the HIVE designed in fusion 360. Print List: 1x Hive Frame 1x Hive Drawer Buckets (add sizes together and it should add to 12) 1x Label (Use Inkscape or similar to edit) Print Settings: The Buckets can be…
Wydruk około 5,72 €–7,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A GBA sized cart for small GB/GBC flashcarts. Great for playing on a Gameboy Advance as they don't stick out. Works with GBA and GBA-SP. Does not work with GB/MGB/GBC or DS/DS-Lite. Tested with…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
I had an issue with my MK4, X axis calibrations failed and I found it was due to Love board right cover was in touch with trapezoidal nut / trapezoidal nut screw during the movement to the right. I tried to re-seat it but still no…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mocking Spongebob : Meme
Wydruk około 3,34 €–4,09 € nettoWstępna wycena jednego wariantu
Geändertes Cover, das besser passt und Probleme beim Kalibrieren der X-Achse verhindert da das original Cover manchmal nicht ganz anliegt ########## Übersetzung des original Textes von @Stefan_106413 ########## Die originale Abdeckung für…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
Easy to make Pikachu pixelated from Gameboy game of 2000 keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Requires a bit of force to mount Use Supports on build plate CAD: https://cad.onshape.com/documents/5ba107f85dbf2a410cf25720/w/0fec43ad386a43c19f2120cf/e/2c120b52248bc3e970ff815d (not my neatest CAD, sorry! :P ) Leave a comment if you'd…
Wydruk około 4,23 €–5,17 € nettoWstępna wycena jednego wariantu
Grey Rhebok : Antelope Skull
Wydruk około 13,86 €–16,95 € nettoWstępna wycena jednego wariantu
I put 100% infill for the best stength. 1973 to 1991 chevy GMC square body trucks, suburbans, jimmys, and blazers
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
!IMPORTANT! Download f3d file and customize slots dimensions for your devices. Notebook/Laptop, iPad/tablet and eBook reader stand. Parametric, change slot_* width for your devices. You can modify thickness, height and width. 3mf file is…
Wydruk około 4,33 €–5,29 € nettoWstępna wycena jednego wariantu
Clips pour plinthes / clips for baseboards Réalisé chez Hephaprint www.hephaprint.fr
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I had two screws in the wall that didn't quite lineup for the whiteboard I wanted to mount so I made this adapter. I was going to glue it to the whiteboard but I didn't need to. I just tightened the screws to the adaptor and then hung the…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
You need for compose: 4x screw M3 4x nuts M3
Wydruk około 6,23 €–7,62 € nettoWstępna wycena jednego wariantu
The ~26 year old ABS part MB424629 snapped, so i measured up the framents and came out with this. I printed mine on my i3 MK3S+ out of Prusament PETG with a 0.4 mm Nozzle and 0.1 mm layers i think, but i by no means optimised this. you…
Wydruk około 3,96 €–4,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Model Description I already have a whiteboard in my office and I didn't want to drill new holes in the wall to mount an IKEA Skadis pegboard. Since I couldn't find a suitable solution for attaching the pegboard to a whiteboard, I created…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Goofy Goober : SpongeBob Squarepants
Wydruk około 9,76 €–11,93 € nettoWstępna wycena jednego wariantu
Ersatzteil für gebrochenes Originalteil Plug and Play
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
The freebox pop does not fit well vertically because it is a cylinder. I fixed that. As all my models, it is available as pay what you want. So if it helps you, please consider giving me a tip or saying thank you in the comments ^w^
Wydruk około 3,22 €–3,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Easy to print, will take around 3.5 hrs for both files (legs + body) For the body infill 5% 0.2 quality For the legs infill 25% 0.2 quality (you may need to add brim )
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
I have an old chalkboard scoreboard for darts games like cricket and *01, but the little chalk holder it came with is flimsy and annoying to use. I've seen scoreboards like this one in other places so I expect it will fit many…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Deutsche Version unten. (If you need a version for a different diameter, please tell me in the comments.) My robot vacuum kept running over the foot of my swing chairs and getting stuck. Thanks to the attachment, he now realizes that he…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
Spongebob phonestand
Wydruk około 3,84 €–4,70 € nettoWstępna wycena jednego wariantu
noga do namiotu ogrodowego / gazebo leg Print instructions PETG - used pretty petg profile
Wydruk około 2,04 €–2,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello, brainy Spongebob figure. Thanks for your download, enjoy the print!
Wydruk około 7,57 €–9,26 € nettoWstępna wycena jednego wariantu
This is a holder for a A3 whiteboard. It's designed to fit this exactly: https://www.amazon.co.uk/gp/product/B01AG0Y7OS There are two main legs, which are handed. Other plastic parts needed are two hexagonal and two shaped nuts. Finally,…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ablagebox für Küchenutensilien wie Kochlöffel, Schneebesen, Teigschaber usw.
Wydruk około 30,30 €–37,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Eine Einfache Kleine Honycob Teebox zum Aufbewahren von bereits Eingepackten Teebeuteln. Wurde noch nicht getestet!!!!
Wydruk około 8,84 €–10,81 € nettoWstępna wycena jednego wariantu
Dies ist die erste von mehreren verschieden großen Teeaufbewahrungsboxen. Sie sind wie am Bild erkennbar stapelbar.
Wydruk około 7,01 €–8,56 € nettoWstępna wycena jednego wariantu
Winner of the first edition of Boeliebots in the Groninger Forum, this is Raspberry. A horizontal spinner Antweight Battlebot. Weighing in at only 140 grams, it's maneuverable and can deal quite some damage to it's opponents. Printing…
Wydruk około 3,47 €–4,24 € nettoWstępna wycena jednego wariantu
Een eenvoudig petanque scorebord met 3 rijen en 3 pluggen. Zo kan je met 3 apart spelen. De pluggen hangen vast met een touwtje en een druppel secondelijm. Aan de bovenkant en onderkant is de vullen 80% om een bevestiging aan vast te…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
EN: Lids with labelling can be printed with a simple colour change, no MMU required, .gcode files already contain the colour change. Material: PLA Layers: 0.3mm Supports: none see also:…
Wydruk około 4,14 €–5,05 € nettoWstępna wycena jednego wariantu
If you are unsure about the dimensions of your frame storage flap and/or the bottle mount, see the spec sheet below for the exact dimensions of the handle. Originally designed for the Santa Cruz Megatower V2, but will probably also fit…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
Introducing the (Unofficial) Gameboy Camera Selfie Stick Adapter! Take hilariously poor photos, now farther away! Can't quite get everyone in the photo? With a little ingenuity you now can! This original selfie stick adapter cradles your…
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
This custom whiteboard marker holder with infill cylinders was designed to match my filament holder design. This fits a standard eraser, and provides space for numerous markers. Two mounting holes are provided to work with size 8 standard…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Screw holes are for a #8 countersunk screw. No supports necessary if printed face down.
Wydruk około 0,67 €–0,81 € nettoWstępna wycena jednego wariantu
EN : Some time ago I was looking for a box for my needle files and found a nice model from Clivebradshaw and remixed it with an label in 4 languages , see:…
Wydruk około 3,97 €–4,86 € nettoWstępna wycena jednego wariantu
Ochranný obal pro Niceboy Raze Radion 4. Nosíte Niceboy v batohu? Ulomil se vám čudlik nebo se reprák samovolně v batohu spoušti? Protective case for Niceboy Raze Radion 4. Do you carry Niceboy in your backpack? Did your speaker break or…
Wydruk około 13,57 €–16,59 € nettoWstępna wycena jednego wariantu
Updates: (04.12.2022) Added versions for the screw and nut with more tolerance. Tablet and Notebook Stand Looking for something to spice up your home office? This laptopstand will become your new holding assistant. It supports lightweight…
A little SideBox for the Prusa MK3(S) 3D-Printer Update: 26.04.2019 i have resized the lid a bit for easier fit -> simple_lid_better_fit.stl Update: 01.08.2020 added a requested Version for the MK3(s) Anti Vibration Feet (not my favorite…
A swim through structure for your fish! Includes: SpongeBob's Pineapple House Squidward's Easter Island Head House Patrick's Rock House Baseplate Instructions: Print the houses and the optional Baseplate glue the houses on the baseplate…
Modulares Regal für Toniebox-Figuren. Die einzelnen Waben wurden vollständig neu aufgebaut und bieten jetzt einige Vorteile: Dünnere Wände, damit deutlich besseres Gesamtbild Unsichtbare Verbindung, an der Front sind nur die Kanten der…
This is a stylish laptop stand that allows you to use the computer at 4 different angles but also allows you to completely fold it for easier storage and transportation. Print two pieces and place them underneath your laptop. You can…
I've remixed this Doodlebob Pen/Pencil Holder from https://www.thingiverse.com/thing:4151595. With the previous iteration, the eyes, nose, and tie were solid which meant if you wanted it to look screen accurate you would have had to draw…
This Aztec Pattern Planter is the perfect size for any small to medium cacti, succulent, or other houseplant. The design includes a series of drainage holes, as well as an optional, custom-fitted drip tray. The default size of the planter…
This is the 3D-Model notebookcheck uses to test and review FDM(FFF) 3D Printers. With a base of only 66 mm x 66 mm, it can be used to find multiple quality issues. Integrated are tests for the build plate adhesion, extruder accuracy,…
Designed for Printables Flash Contest #101, this finger skateboard I designed features real rolling wheels to give you that tactile feeling. Tried my best to design it without need for supports, but the wheels that do not contact the…
A laptop stand for thinner notebooks. The v2 has a bit thicker bottom brace for thicker laptops. Category: 3D Printing
Remix for multi-material printers. Original model by Alsamen: https://www.thingiverse.com/thing:3033103
This is my take on the Infinite Notebook concept originally popularized by Gazzaladra . While inspired by the same idea, this is an original model that I personally designed from scratch , featuring its own structure and assembly system.…
PokeBox v2.0 + new Ultra Ball! Update: Robust and glue free hinge! New Ultra Ball version! Hi everyone! This model is my introduction to making mechanisms in 3D printing. Feel free to give feedback on ways to improve in both the building…
After the success of my enXLosure for Prusa XL, I am excited to announce my latest Project; COREBOXX → The Filament Storage System for Prusa CORE one! COREBOXX is an all-in-one platform for neatly storing, organising, and managing…
I've been enjoying modelling SpongeBob characters lately, so I thought I'd try my hand at making Fred the fish. Done in Blender using mostly subsurf and boolean modifiers.
It's the Fortnite reboot card. Recommended 75% print size. Infill as little or as much as you want.
Mini llavero de pokebola clásica de la gran serie de Pokemon. Tamaño: 25mm de diámetro.
I remixed this awesome model of Patrick Star to turn it into a bottle opener using a €0,05 coin! Other coins might fit as well! Print the model Glue a 5c coin inside Get a beer and enjoy! Category: Kitchen & Dining
Are you a skater? You will like it. It's very simple and rad! If you like this model, a coffee helps me stay balanced - both on the board and while modeling ☕ 👉 buymeacoffee.com/nexl Thanks for the support 🙏 Print instructions Material:…
Please , if you don't use your head, save your time and filament, thanks materiál: PETG without supports infill: 5% layers: 0,2mm (but top of : Bhlava, Boci, Bduhovky, Bcoky, Bret - 0,07mm) - Bzuby, Bpasek and Bramena need to be glued -…
Makes your apple watch look like a gameboy when charging. Print upright with supports as needed.
Ich habe dieses Miniaturmodel der Toniebox für unseren Weihnachtswichtel erstellt. Sie finden aber auch sicher in jedem Puppenhaus platz. Das Model liegt in zwei Versionen vor: Einteilig für die Option es mehrfarbig zu drucken oder…
Check out the new V2 too :) https://www.printables.com/model/692209-robust-finger-skateboard-v2-durable-rollable-fully/files Board 1: WIth Chamfer Board 2: With radius Printing Instructions: Print the axis massive with as many perimeter…
The notebook in the images I made for my self. It was a multi-body part and is not available. The slots look nice…but were not good for writing! So I removed them. The model available for download is blank, like the reference model. Use…
This is an old version. You can find the updated version here . Introduction I'm Seb, I'm a student and I've been working on the idea of 3D printing a skateboard for more than 2 years. The goal was to print both the trucks and the board…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Straight from Bikini Bottom's Jellyfishing fields. This guy was inspired by the octopus flexi toy Layer Height: 0.16 Infill: 10% Use CA Glue to Connect parts
A bust / sculpture of the Dude (Jeff Bridges) from the movie "Big Lebowski", made in Blender. I wouldn't print the bust any smaller than in the STL provided. Tree Supports are definitely your friend here (be extremely careful when…
A functional Gameboy Advanced Cartridge. Modeled in OpenSCAD. Test fit in a GBA, GBA SP, and DS Lite with Mario Kart. Print with build plate supports.
This is the Ebony Dagger from Skyrim. The measurements seem accurate, but it is a little small, so you might want to scale it up a bit. UPDATE- I have remade the 3d printing files to fix some issues and make them easier to print.
This is a remix of the lovely "Ebony Dagger (Skyrim)" model by Shadowcraft. Thanks, Shadowcraft! I have made the following changes to the original: Scaled up the dagger so that overall length is now about 40 cm. Trimmed the base of the…
Update 25.03.2024: Added a parametric and customizable version of the stand. Improvements The model was developed to enable fast and material-saving printing and at the same time to be stable. The print in size 25mm requires only 42g of…
Share a photo of the printed model 🗿 Remember to give me a like 👍 https://www.instagram.com/kuleshow/
Give it a “like” and a download, so I can get those sweet sweet Prusameters :) --- This is a simple and effective wall hook for hanging skateboards or scooters on the wall, such as in a garage. I printed a few, and realized I could also…
Bigger sidebox to fit more stuff. Please read print instructions. Print instructions There are two versions of left box, one blocks SD-slot (if you use other method of transferring files) and one with the SD-slot reachable. After feedback…
Giant Gameboy Cartridge Wall Art
This model pressure fits together with little tiny square pegs. If you want to avoid using glue, your extrusion multiplier needs to be tuned just right. Assembly is simple! But might make some instructions soon :)
AA Rear shell is here! USBC Rear shell is here! This model is designed specifically for the Funny Playing IPS screen mods. PRINTING: I have had successful prints with 0.4mm and 0.6mm nozzles at 0.2mm layer height with PLA, PETG, and ABS.…
By downloading this item, you agree: 1) Not to distribute the files 2) Not to sell prints of this item. You ARE permitted to print this item as a gift. Only Merchants with an active License may print & Sell FatesEnd items. • 🔗MMF:…
A very nice Sponge Bob's pineapple house for fishes to live in. I made it as accurate as possible to replicate the same house shown in the cartoon, but I'm hoping that fish won't get lost in there. Should be printed in Orange/Green, but I…
Tired of multi-file modular organizers that take forever to sort and print? Welcome to the ultimate workspace evolution! This premium, honeycomb-inspired storage system has been completely redesigned around a single, universal outer case…
This is the second version of the design I made previously. The first variation is more intended for 3D printing with resin and subsequent painting with acrylic paints 🎨🖌. 🫧🧽 The design is optimized for color 3D printing. The arms have…
Prying and Opening Tool Flat - Rev.3 - Smartphone - Notebook - Laptop - Automotive Open your tech device and safely remove components with ease. Essential for DIY repairs like displays, batteries, motherboards, headphone jacks, joysticks,…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Print & replace orignal Print in PETG or PC Weight in PC is 5.3g tested and works fine Please leave a like if you downloaded it :-)
Here's a 6 color remix of Cipis' multi-material remix of the original sitting Spongebob model by Alsamen. This version is built for Bambu Lab X1 with 2 AMS units and was saved in Bambu Studio. Here are the changes I made: Changed sock…
Opraveno. Nahrán nový a spravný soubor. Teď už by velikost měla odpovídat.
Need a ride? Why not Fingerboard... An Open Source Project - Fusion360 File Available! Print instructions Print, Peel, Snap and Play PS: Model toy in the G-code is 86% scale of .stl model files.
Simple print. Just print flat and the Gameboy Color logo sticks out so you can do a color swap to give the logo an extra dimention.
MyInfiniteNotebook V2 A new version of my modular notebook system https://www.printables.com/model/1760740-my-infinite-notebook redesigned with a lightweight hexagonal cover structure. The V2 introduces a customizable cover, reducing…
A stand for your Gameboy Advance SP to display it. Can hold 4 GBA cartridges. The model is remixed from multiple other designs over on Thingiverse, but I do not remember the models anymore as I designed this a while back. If you see your…
Unveiling the Retro Gameboy Stand, a versatile 3D-printed stand designed to showcase either your Gameboy Classic or Gameboy Color console with ease. This single-display stand is crafted in the iconic Gameboy aesthetic, paying homage to…
