Liczymy pasujące modele…
⚠ Be aware this model has not been printed and tested as complete part yet. ⚠ I reverse-engineered the Delonghi ECP front panel as best and close to the original as i could. The original intention was to then modify it for mounting a…
Since creating the first version, my 3D CAD skills have improved a little, allowing me to design V2 with more clearance to prevent the tube from kinking My Print Settings Walls: 4
Deport de ventilation pour mecpow x4 pour le mettre contre le mur et gagner le la place s'adapte avec le ventilateur et les vis d'origine As imprimer avec des support arborescent comme sur la photo
If you are running an indoor regatta and want to keep an eye on the PM5 that is attached to your PC. This mount is a tight fit for your PM5. You should be able to use the normal bolt and nut to mount it without needing any tools.
⚠ Be aware this model has not been printed and tested as complete part yet. ⚠ I reverse-engineered the Delonghi ECP front panel as best and close to the original as i could. The original intention was to then modify it for mounting a…
Super basic laser focusing screen to set your laser proper distance for optimal operation. I bought my laser used and it
Electronics box for Gaggimate mod on the Delonghi ECP 4x M3x6-8mm optional for lid. 2x M3x6-8mm needed for the board. 2x M4x6mm for SSR
This model allows you to use the original front panel to hold a LILYGO 2.8" for use with a Gaggimate mod. The rotary switch must be removed. You will need: 2x M4x12mm screw 2x M2x6mm screw Printing Notes: Screen Holder: 20% Infill Tree…
Designed a small drip tray to fit taller cup into coffee machine. Usually you have the metal one but not with the Delonghi ECP31.21 which i have Should be printed fine with PLA and PETG You can try to print the model at an angle to have…
Some moisture accumulation take place inside the machine and this lid is to prevent that. A little rack is added in order to prevent pressure difference.
exhaust duct for my mecpow x4 pro to connect to the cimney diameter duct hose 73.30mm base 100 x 70 mm
Ein Stiftehalter für die Pilot Stifteserie V5 oder V7 Hi-Tecpoint mit Patronen. Die STL ist ein komplettes Modell. Die Step-Files können gemeinsam geladen werden und dann bei einem Mehrfarbensystem entsprechend konfiguriert werden. Viel…
Replacement drip tray lid for espresso machine DeLonghi ECP. Better water sinking; original one fails to absorb water well. It does not sit leveled (check side photo), because otherwise it would need non-uniform thickness. But I can do…
I made this support because DeLonghi's vibrations made the scale show incorrect values during use.
This is a gridfinity holder to hold the 4 colors of the Pilot V5/V7 Hi-Tecpoint refillable. I use it on my desk to have easy access to the pen and easily switch from one to another. Printed in PETG.
I had issues with the X-axis cable interfering with the machine when printing close to home on the Mecpow X3 Pro laser engraver, and the same goes for the air assist line. I created this to lead both cables/lines up and away from the tool…
Piedi per incisore laser Mecpow X3 Pro, utili per poter fissare l'incisore su di un tavolo da lavoro o un pannello, in modo da porter centrare correttamente l'honeycomb (nido d'ape) Per eventuali consigli su migliori ecc. sono a…
FDM Printable and SLS optimised versions of the front panel i made for Gaggimate intergration. The print requires some supports for FDM. Recommended placement and orientation (notice 2 slots with slopes pointing upwards) Remember to print…
Since creating the first version, my 3D CAD skills have improved a little, allowing me to design V2 with more clearance to prevent the tube from kinking My Print Settings Walls: 4
I had issues with the stability of the laser module and therefore created an extended rail. You will need 2 x M3 x 4 mm countersunk screws. My Print Settings Walls: 4 Brim: yes
To further improve the stability of my laser gantry, I designed a screw-in stabilizer. I used 3.5 x 10 mm metal screws because I had no shorter ones. Measure the width of your gantry before printing.
Deport de ventilation pour mecpow x4 pour le mettre contre le mur et gagner le la place s'adapte avec le ventilateur et les vis d'origine As imprimer avec des support arborescent comme sur la photo
If you are running an indoor regatta and want to keep an eye on the PM5 that is attached to your PC. This mount is a tight fit for your PM5. You should be able to use the normal bolt and nut to mount it without needing any tools.
Super basic laser focusing screen to set your laser proper distance for optimal operation. I bought my laser used and it
Electronics box for Gaggimate mod on the Delonghi ECP 4x M3x6-8mm optional for lid. 2x M3x6-8mm needed for the board. 2x M4x6mm for SSR
This model allows you to use the original front panel to hold a LILYGO 2.8" for use with a Gaggimate mod. The rotary switch must be removed. You will need: 2x M4x12mm screw 2x M2x6mm screw Printing Notes: Screen Holder: 20% Infill Tree…
I replaced the gravity fill inlet in my van with a new city water inlet, and needed a faceplate to cover the old larger hole. This model is based on the RecPro RV City Water Fill Inlet (Amazon; not an affiliate link) The hole is…
Designed a small drip tray to fit taller cup into coffee machine. Usually you have the metal one but not with the Delonghi ECP31.21 which i have Should be printed fine with PLA and PETG You can try to print the model at an angle to have…
English Tutorial Obtain a 120mm fan and a 12V power supply Add 8 M3 brass inserts using a soldering iron (to the 4 corners and on each side of the fan) Attach the carbon filter bracket with M3 screws (on the side with the fan label)…
Waveshare 2.8in round screen mount to mount it to the Delonghi ECP3630 Espresso machine. Should also fit on other Delonghi ECP Machines, but unsure. Print is broken into 3 parts for ease of printing I print the Outer adapter on it's face…
Für die Montage werden 2 Schrauben M3x4, sowie zwei M3-Muttern benötigt.
A stand to hold your portafilter flat and steady while you tamp the coffee powder.
This is intended to mount LilyGo T-RGB 2.1” round touch screen display to a Delonghi ECP series espresso machine for the purposes of providing a GaggiMate display. There are other options out there, but they did hold the screen securely,…
This is UNTESTED and EXPERIMENTAL. This was done at the prompting of Anthrox80 and TorxFighter from the Gaggimate Discord ECP discussion: https://discordapp.com/channels/951416527721230336/1378844857426251918/1524394854048731297 The…
These switches where handed out for free in Australia (they can still be purchased). They basically turn off a power board when your computer is turned off allowing monitors, printers, speakers and so on to be turned off. I made this by…
A TECPRO style racing circuit barrier, perhaps for your OpenRC F1 racing needs. It is designed to be printed just as a thin shell. You can then use a paperclip on the recessed underside to connect a few of them together. Because it is…
When I wanted to transfer my current toolbox from tecpo with a lot of SAE sockets and wrenches I found the gridfinity system. Because I did not find suitable boxes which are fast and easy to print with a minimum amount of material I…
Bracket can used with or without a spacer. Spacers are so the cam can be mounted at a greater downward (or upward if assembly is installed inverted relative to my picture) angle. I would jump right to the 10 degree spacer and not use the…
Replacement covers for Motorline ECP TX3CH Ver 2.0 remote, designed in Fusion 360, I would recommend to print in ASA if you're leaving the remote inside the car or at least PETG. Easy print with no supports. If my model was usefull for…
Heyho I already showed in the last video what can happen if you "forget" a candle in a 3D printed holder. I also presented a constructive solution on how to theoretically prevent this burning. However, as I found the project exciting…
The laser sits about 20 mm from the outer edge of the laser module. This tool can help to find the zero point. Print Settings Supports: No Resolution: 0.2 Infill: 20 Filament: PETG
Platzsparende Plattform für eine Weller WECP 20 Lötstation und ein Lötwollehalter. Mat.: Petg Layer 0,2 wall 3 infill 25% Top 5
This is a case for the SD2IECplug project , which is my layout for the SD2IEC floppy drive replacement for 8 bit Commodore computers. The SD2IECplug v2 was never specifically designed to fit into an enclosure, so this case makes a few…
Elevate your coffee-making experience with this custom-designed Portafilter Hanger, perfectly tailored for the 51mm portafilter of the DeLonghi ECP3420 (and similar) espresso machine. Key Features: Perfect Fit : Designed specifically for…
Mecpow X3 Pro Honeycomb adapter Hello, I've modeled and printed adapter, which helps in placing honeycomb H44 (44 cm x 44 cm) under my Laser Engraver Mecpow X3 Pro. I am not sure if it can fit to other models, but if I get information in…
