Wyniki wyszukiwania: ective

Sortowanie

1768 modeli

P
Printablesvcr

Protective Hard Drive Case

Maximum HDD dimensions: Length 148 mm Width 102 mm Height 27 mm HDD is attached from bottom with a 95.25 mm by 44.45 mm screw pattern. Check if your hard drive fits and has this mounting pattern on bottom. Printing To assemble one case,…

Pobrania
1829
Polubienia
456
Ocena
5
P
PrintablesZachy

Prusa Protective Face Shield - RC3.2 Dentmedia bandage free version

It is possible to use any type of: rubbers bandages, tested up to 25mm thickness elastic tapes with / without holes This version is based on the "fast" RC32 edition from 1.4.2020 Print instructions Same instruction, as original RC32: 3…

Pobrania
187
Polubienia
1
Ocena
0
P
Printablesayjay

protective jaws for a vice with holder for round material like pipes - Schonbacken für einen Schraubstock mit Halterung für rundes Material wie Rohre

The protective jaws have notches with which round material such as pipes can be securely clamped. There are holes for magnets (diameter 6 mm, height 3 mm) included. This is possible vertically or horizontally. It works well with PLA, but…

Pobrania
104
Polubienia
15
Ocena
0
P
PrintablesMatthias

Smartphone Box für Rucksack - Protective mobile box for backpack

Geeignet auch für: Powerbanks inklusive Kabel verpackte Müsli-Riegel … Die Maße der Dose sind auf die maximale Druckfläche des Prusa Mini optimiert. Natürlich können sie aber bei größerer Druckfläche skaliert werden. Verkleinern ist nicht…

Pobrania
68
Polubienia
11
Ocena
0
P
Printableschixxi

Soldering Iron TS80P - Protective Case

I needed a protective case for my TS80P soldering iron. There are many variants available already, but I was looking for a compact case for the TS80P with one tip only. I couldn't find one which fitted my needs, so I came up with this.…

Pobrania
60
Polubienia
8
Ocena
5
P
PrintablesPrint2Solve

Protective Cap (with Tether Eyelet) for 1" (25 mm) Hose Barb | Schutzkappe mit Öse für 1" (25 mm) Schlauchtülle

🇬🇧 When autumn arrived and I had to disconnect my outdoor garden water hoses to prevent frost damage, the exposed fittings needed reliable protection from dirt and insects over the winter. This functional protective cap was designed to…

Pobrania
0
Polubienia
0
Ocena
0
P
Printabless.mensak

Parametric protective case / toolbox

Parametric protective case/toolbox with a groove for an optional seal. You can modify width, length, height, corner radius, screw hole size, hinge position, rib and box thickness. Print settings any rigid filament 0.2mm layer height 0.4mm…

Pobrania
4430
Polubienia
1318
Ocena
5
P
PrintablesSteezy

Simple yet effective clothespin

I came up with this simple and quick yet strong 3d printed peg which doesnt require any assembly, one has smooth jaws and other one has small teeth. I strongly recommend print with PETG as the spring from PLA doesnt really hold up that…

Pobrania
3580
Polubienia
669
Ocena
4,63
P
PrintablesLoogle

GaggiaBoard V3 Housing (Protective)

This housing holds the GaggiaBoard V3 (PCBv3, PCBv3.1, or PCBv4) from the Gaggiuino project, with maximum coverage to protect from a potential water leak. Design intent is for the board/housing to go in the corner vertically behind the…

Pobrania
3138
Polubienia
172
Ocena
5
P
PrintablesJohan Fuhri

Samsung Galaxy A55 Protective Case (TPU)

A protective case for the Samsung Galaxy A55 designed to be printed in flexible filaments like TPU. The STEP file is also provided for easy customization in the CAD program of your choice. 2024/06/21 : Updated the design to be 0.6mm…

Pobrania
2464
Polubienia
81
Ocena
4,46
P
PrintablesKyleTW

MK4 Bi-Directional Fan Duct - Lightweight and Effective

*NOTICE* If your duct is not centered to the nozzle, please print the offset version of the duct that offsets the ducts 2mm to the right to try and correct for this. There does not seem to be a reliable pattern for what machines need the…

Pobrania
2180
Polubienia
561
Ocena
4,9
P
PrintablesTom Vít

Tom's Protective Darts Case

Tired of repeated darts assembling and disassembling? Do you need simple, one-piece protective cover which will keep your darts safe and flights straightened? This is the solution for you, I hope. ;) Video: https://youtu.be/pb-j95AZSgk…

Pobrania
2086
Polubienia
292
Ocena
4,63
P
PrintablesPashionFruit

Isometric perspective drawing line help template

This A5-sized template helps you to draw perspective lines in an isometric view. Getting the perspective right can make or break a (product) drawing. This template helps you draw help lines every time. If you want an A4-sized version…

Pobrania
1867
Polubienia
1411
Ocena
5
P
PrintablesMarc

Selectively-Underextruded Flowers

Please note that the license for this print is for the layer-change G-code only. The Roses of Unicofil flower used as an example remains “Attribution-NoDerivatives” and is itself unmodified in this print. By dynamically adjusting the…

Pobrania
1853
Polubienia
342
Ocena
5
P
Printableskmarty

Articulated Axolotl (added selective brims)

Just "discolored" remix with added brim on selected areas

Pobrania
1842
Polubienia
116
Ocena
4,69

2-Point Perspective Spiral Vases

Choose tall or wide and scale to any size! Prints in spiral vase mode. Filament here https://www.amazon.com/gp/product/B0C8MBNF27/

Pobrania
1496
Polubienia
454
Ocena
4,93
P
Printablesysengard

Protective Case for TP4056

Protective case designed specifically for the TP4056 charging circuit. Featuring a entry point for USB cable, a dedicated exit for power cables, and a secure pressure fit design. With this circuit things can get quite hot so i designed it…

Pobrania
1413
Polubienia
125
Ocena
4,83
P
PrintablesRain And Storm

Protective Covers for MC4 Solar Panel Connectors (plugs, caps, moisture, water, dust)

Set of two watertight covers for protecting MC4 connectors from dirt and corrosion. Parametric, open-source, free. Designed using ShapeScript . Features Actual MC4 locks — not just plugs or caps, these covers attach the same way MC4…

Pobrania
1332
Polubienia
124
Ocena
4,92
P
PrintablesJEng

Galaxy Tab A9+ protective hard case with STEP file

Change log: 03.08.2025 - v2.1 released. Much better sizing for the one.pice model. 02.06.2025 - A one-piece model v2 for printing with TPU added. STEP file can be downloaded. Some dimensional inaccuracies adjusted. 25.04.2024 - First…

Pobrania
1248
Polubienia
58
Ocena
4,71
P
PrintablesRato

AH-64 Collective grip

This is 3D model for AH-64D collective grip I created based on dimensional drawing I found online. I originally created this so I could have my own collective grip for DCS. This design includes all buttons and switches found from real…

Pobrania
1198
Polubienia
115
Ocena
5
P
Printablesyor42

Lenovo Legion GO Protective case

A protective case for Lenovo legion go tablet; All the protective cases available so far did not support controller separation, so I made my own. it also has slot for perpendicular USB-C adapter on top USB-C slot and kickstand. print with…

Pobrania
1181
Polubienia
83
Ocena
5
P
PrintablesJernejP.

Minimal Apple watch 7 45mm protective case

So this is a thin and minimal protection case for Apple Watch Series 7 45mm. Prints in 14m and uses only 1,4g of material.

Pobrania
1180
Polubienia
66
Ocena
5
P
PrintablesTmpx64

Simple Mudguard - Bike fender - Easy print - Road Cycling - Protective - Protection gear

Quick and easy-to-print mudguard, optimized to fit diagonally on your print bed. If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is…

Pobrania
1164
Polubienia
221
Ocena
5
P
Printablesjdiwnab

iPhone 8 Protective Case

Case for iPhone 8, designed to be somewhat more protective than other prints. Print with TPU. Print with PLA on the first few layers for a ridged back plate. I haven't tested how protective the case is, but it's better than the very…

Pobrania
905
Polubienia
39
Ocena
5

Old detective Smoking pipe

Old detective Smoking pipe

Pobrania
905
Polubienia
100
Ocena
5

NexGen3D: Lenovo Legion Go Audio Enhancement Protective Case

Simple stylish protective case for the Legion Go with integrated audio redirectors. Recommend printing from PETG or PETG-CF, I did mine in PC-CF, avoid stiff plastic like ABS and ASA. Supports are needed at the bottom for the USB-C access…

Pobrania
903
Polubienia
69
Ocena
5
P
Printablespeter m

Headband for Protective Face Shield (RC2 type)

Update: Don't want to delete the post, but this version has been further reduced in size and improved, so here are links to the newer versions: For the original Shield (240 x 240 mm), here:…

Pobrania
898
Polubienia
0
Ocena
5
P
PrintablesWhitey4405

Samsung A22 Protective case

A snap-fit Samsung A22 phone case to protect the phone exterior. It is recommended to print the case on the back face. However, the underside radius form (shape) nearest to the plate is questionable. Further reducing the layer height may…

Pobrania
890
Polubienia
20
Ocena
4,67
P
PrintablesMartin

GoPro Hero 10 Protective Cases

Three versions of a GoPro Hero 10 protective case. Version 1: With front screen cutout Version 2: With partial front screen cutout to show only the relevant top and bottom bar recording information Version 3: Without front screen cutout…

Pobrania
826
Polubienia
77
Ocena
5
P
PrintablesUdo's 3D World

Objective Markers

Update: Included one with a 6" + 40mm diameter (so comparable to have a 40mm objective and 3" distance from that). Previously, I only had a 6" diameter in total. Objective markers - but you can change the flags depending on who controls…

Pobrania
771
Polubienia
64
Ocena
5
P
PrintablesJohan Fuhri

Samsung Galaxy S23FE Protective Case

I couldn't find a decent protective case for my S23FE, so I made this one in Fusion360. Mine is printed in SBS filament (from FilX), but any of the less flexible materials (PLA, PETG) should work. Supports are required for the area…

Pobrania
731
Polubienia
22
Ocena
5
P
PrintablesEcho116

Canon LP-E6N Protective Battery Cover

If you're looking for a replacement protective battery cover this is it. Print settings: Printed in PLA, .6/.4mm nozzle, .2mm layer height. Will print solid with a .6 or a .4mm nozzle if printed with 2 walls and at least 3 top/bottom…

Pobrania
690
Polubienia
94
Ocena
5
P
PrintablesJakub Kalfař

Hormann HSE protective case

The controler has a manufacturing defect and cracks in the lower area, this case reinforces the controler and can be used on the already destroyed controler. Put the controler in the packaging, it's tight.

Pobrania
685
Polubienia
47
Ocena
5
P
PrintablesJoG890

Microbit protective case

Any feedback is welcome Because of the frequent use by young people it seemed smart to make a case to protect the Micro:bit against falls and damage. This is an easy snap-on case that keeps all functions of the Micro:bit working while…

Pobrania
660
Polubienia
31
Ocena
5
P
PrintablesNikita

Kill Team objective markers + token markers

Kill Team 3rd Edition Objective Markers and Token Markers Objective Marker 40mm inner circle plus a 1" outer circle to represent the control range. Token Marker 20mm hole designed to fit a token of your choice (e.g., smoke grenade) with a…

Pobrania
653
Polubienia
36
Ocena
5
P

SHERLOCK GHOST - THE GHOST DETECTIVE

Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) Sherlock Ghost 👻🕵♂ Meet…

Pobrania
644
Polubienia
217
Ocena
5
P
PrintablesT K

BambuLab X1C TPU-Display screen protective cover

2024-The hard shell version has been redesigned and anti-loosening buckles have been added. https://makerworld.com/zh/models/100371#profileId-198369

Pobrania
632
Polubienia
114
Ocena
4,92
P
Printablesjcjames_13009

Festool clamp FS serie protective pads

I have a set of Festool clamps I use mainly with FS2 Rail. I wanted to add protections to use them as standard clamps and protect wood surface I designed and 3D printed both pads in Prusament PETG Jet Black with my MINI+. No support…

Pobrania
622
Polubienia
115
Ocena
4,67
P
PrintablesEmpiricus

Template for cutting plastic sheets for Prusa Protective Face Shield

Template to make it easy to cut shields for the Prusa protective face shield Print instructions Just any filament will do

Pobrania
621
Polubienia
6
Ocena
5
P
PrintablesNeil-Seattle

TPU Strap for the Prusa Protective Shield

2 part TPU strap for the Prusa Protective Shield. Should fit most size heads. Print instructions Depending on your TPU hardness, you may have to shrink or grow the Z axis. Softer TPU should be printed thicker, while harder TPU should be…

Pobrania
599
Polubienia
5
Ocena
5
P
PrintablesMakers Guild

Protective Face Shield Hyper-Speed Remix - RC3HX 5mm

5mm design update from the previous high-speed remix - RC2X Currently in use at GP surgeries around Portsmouth, UK and community keyworkers. We are producing about 100 a day on 4 printers Revision 1 • Modified width to be compatible with…

Pobrania
595
Polubienia
0
Ocena
0
P
Printablesmojo

Prusa Protective Face Shield - RC2 - A4 Remix

UPDATE: updated versions of the fastprint is located here as I couldn't update the files on this page anymore: https://www.prusaprinters.org/prints/26902-prusa-face-shield-speedprint-rc2-a4letter-iso838 UPDATE 2020-03-23: Updated with a…

Pobrania
584
Polubienia
0
Ocena
0
P
PrintablesJonas

Protective box for Arduino LCD with I2C

Although several designs exist, I wanted a minimalistic one, so I designed one myself Requires no additional hardware, LCD fits snuggly in the casing. Casing clicks together. Requires some supports for better result ( supports for the…

Pobrania
579
Polubienia
60
Ocena
5
P
PrintablesTom Meysen

8x Prusa Protective Face Shield - RC3

UPDATE: There was an issue in the RC3 version, Prusa fixed this in RC3.1. I changed the gcode and 3mf file here as well to this updated RC3.1 design. This file can be used to print 8x the RC3.1 version at once on your MK3/MK2.5(s). Print…

Pobrania
565
Polubienia
2
Ocena
5
P
Printablesrbx;-)

usb-C dust cover for Android smartphones with ultra-slim protective sleeve

There are some usb-c dust protectors on printables but they were too bulky or too shaky for me. That's why I designed my own protection for my smartphone with a Pitaka protective cover. if you need any adoption or change let me know :-)…

Pobrania
558
Polubienia
130
Ocena
4,5
P
Printablesmrusk

Protective Flip Cover for Push Button

A flipable cover to protect accidental pressing of a round pushbutton. The round opening has 22 mm diameter. 2x M3x6 screws needed for the joints.

Pobrania
557
Polubienia
38
Ocena
5
P
PrintablesRato

Collective base

Work In Progress! I will write more defined instructions later. From pictures you can find explosion view, which helps you quite a lot. There is also a step file for whole assembly. This base is originally designed to be assembled with…

Pobrania
544
Polubienia
74
Ocena
5
P
Printablespavol.n

10x STACK Protective face shield Improvement of production

I wanted to be able to print more than just 2 at a time. Specially over the night when everyone is sleeping. I came up with the idea to stack them on top of each other. Instead of 2 you could print 8 during night. If your printer has…

Pobrania
535
Polubienia
3
Ocena
0
P
PrintablesLine Arc Line

Apple Pencil Protective Case

I wanted a protective sleeve when throwing my apple Pencil in my backpack. However, I didn't like the options I saw around. All the prints require unscrewing, unsnapping, or other multi-part motions to get the pencil in and out. My design…

Pobrania
533
Polubienia
91
Ocena
5
P
PrintablesDJK

Protective housing for 1800W boost DC-DC converter

Print in any setting, insert converter and tighten it down with 4x M3 screws.

Pobrania
524
Polubienia
42
Ocena
5
P
Printables.STL

Vertical Universal Gun Rack- 2 parts, 3 Screws. 100% effective.

Universal Gun Rack Idea made for any size, length, shape, also editable for any needs. Can be mounted in any way, shape, or size. editable and customizable complete vertical storage racks. Uses 2 normal #6 drywall screws for the bottom…

Pobrania
518
Polubienia
65
Ocena
5
P
PrintablesJP

Hasselblad Magazine Protective Cover

Protective cover for Hasselblad magazines 12, A12, A16, A24 etc. Snaps into place on a magazine. Locks the dark slide into place. Printing Tested printed in ABS and PLA with 0.2mm layer height.

Pobrania
466
Polubienia
39
Ocena
5
P
PrintablesR1CDM

Hikvision DS-KABV6113-RS protective shield

Hikvision protective shield for KV6103/6113 series villa door station.

Pobrania
458
Polubienia
35
Ocena
5
P
PrintablesSP9DEV

LiPo 2-5S Balancer Connector Caps - JST-XH Protective Cap

Protective caps for Li-Po balancing connectors - JST-XH 2.5mm. Available sizes: 2S, 3S, 4S, 5S Additionally, more sizes can be made by editing the original STEP file (slicing in the middle and adding/subtracting 2.5mm). Please print a…

Pobrania
455
Polubienia
60
Ocena
5
P
PrintablesTommy Houghton

E3VP2 Full CAD + Remixes for Ugly Ender 3 V2 Toolhead with Sherpa Mini + Sherpa Micro + Dual 5015 fans + Volcano + ADXL345 Nozzle Mount (Files belong to their respective and linked owners.)

(Files belong to their respective and linked owners.) Please email/contact me for immediate changes such as incorrect credit or placement, etc. I take no credit for any of these designs except for the extremely basic remix of some of the…

Pobrania
452
Polubienia
74
Ocena
5
P
Printableshugo lecoeur

Rugged Snap-Lock Protective Box

This rugged box was designed as a durable and versatile storage solution for electronic devices and small equipment. Its sturdy construction makes it suitable for transport, everyday use, and demanding conditions. It features a reinforced…

Pobrania
452
Polubienia
157
Ocena
5
P
PrintablesLASOFT

Protective Face Shield - RC2 Speed Remix

Shorter print time version (2 headbands in 2 hours). Compatible with RC2 visor. Print instructions Material: PETG Layer height: 0.3 Infill: 0% Perimeters: 3

Pobrania
444
Polubienia
1
Ocena
5
P
PrintablesDaniel Wyrwał

STACKED - Prusa Protective Face Shield - RC2

This is stacked version of Prusa Protective Face Shield - RC2. I added only small pieces to support visor pins. The rest of Face Shield is untouched. Gap between parts is 0.3mm. Print instructions Supports are not necessary. Print with at…

Pobrania
442
Polubienia
1
Ocena
0
P
PrintablesJohan Fuhri

Protective Case (TPU) for the Samsung Galaxy S23FE

I made this protective case for a Samsung Galaxy S23FE, specifically to be printed in a flexible filament like TPU. Supports are required for bridging areas. STEP file is also included for those who wish to remix or customize. If you are…

Pobrania
428
Polubienia
21
Ocena
4,75
P
PrintablesLWC

Pico 4 Protective lens Cover

Two lenscaps connected by a stretchable connection, so no matter what IPD you have your pico4 set to, it will still fit and protect your display from sunlight focusing through the lenses and damage the displays. Because they are connected…

Pobrania
423
Polubienia
39
Ocena
5
P
Printablestecnoculebras

Pokemon Detective Pikachu lightbox

COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…

Pobrania
415
Polubienia
237
Ocena
0
P
PrintablesMakerCameron

9V Battery Protective Cap

What are these good for This is a protective terminal cap for use on standard 9V batteries. Protects 9V batteries when not in use Shields the battery contacts, reducing the risk of a short circuit Protects battery contacts from damage due…

Pobrania
414
Polubienia
67
Ocena
5
P
Printablesrooihond

Xiegu G90 Protective Side Rails

Intro I wanted a slimline protection frame / side rails for my Xiegu G90 but could not find any suitable ones on the internet. So I set about measuring up and creating my own. Design Principles Slimline - not take up too much space, but…

Pobrania
407
Polubienia
31
Ocena
5
P
PrintablesMakers Guild

Protective Face Shield High Speed Remix - RC2X

Set myself a half day challenge to half the print time of the RC2 face shield. Prototype revision for high-speed printing 1 hour 30 minutes for 1, could be faster. We are currently producing sets for food delivery volunteers for the…

Pobrania
405
Polubienia
2
Ocena
5
P
Printableslogi788

Schutzdeckel für 13 pol. Stecker - Anhängerstecker / Trailer Protective cover 13 pin V2

Mein Anhänger steht immer draußen und der Stecker setzt sich mit der Zeit mit Dreck zu. Damit der Stecker immer schön sauber bleibt, habe ich diese Schutzkappe konstruiert. Die Version wurde etwas angepasst, damit die Dichtung vom Stecker…

Pobrania
404
Polubienia
28
Ocena
5
P
Printablestesla3dlabs

#RESISTANCECOVID RC4 - Prusa Protective Face Shield - RC1 RC2 RC3 RC3.1 - easy shield FIXATION & ROTATION

REMIX RC1 RC2 RC3.1 shield face protection from Prusa without any hole to do in the shield and compatible with any 150 x 150 printer (medium model) REMIX: https://www.thingiverse.com/thing:4233193…

Pobrania
401
Polubienia
0
Ocena
4
P
PrintablesMartin

GoPro Hero 9 Protective Cases

Three versions of a GoPro Hero 9 protective case. Version 1: With front screen cutout Version 2: With partial front screen cutout to show only the relevant top and bottom bar recording information Version 3: Without front screen cutout…

Pobrania
398
Polubienia
29
Ocena
5
P
PrintablesoXiVanisher

Miniature War- and Skirmish gaming Objective Marker

Miniature War- and Skirmish gaming Objective Marker for 40 mm Markers with a 1, 2 and 3 inch distance display. Printed with only two layers makes it strong and flexible. There is also a Miniature War- and Skirmish gaming Control Range…

Pobrania
392
Polubienia
47
Ocena
5
P
PrintablesMe

Protective storage case for 18650 battery

I designed this experimental case to protect my 18650 batteries from short circuits in storage. The two halves screw together, creating a cover that protects the battery. I printed it with Elegoo pla, using variable layer height (0.3mm,…

Pobrania
380
Polubienia
41
Ocena
5
P
PrintablesSprabtor

Replacement Protective Tip for 4th Generation TipToi Pen

This 3D model represents a replacement protective tip designed specifically for the 4th generation TipToi pen. This tip ensures the longevity and functionality of your TipToi pen, providing a cost-effective solution for maintaining its…

Pobrania
380
Polubienia
12
Ocena
0

Yaesu FTX-1 Protective Cover - KC3WRY

Whether you're going portable, mobile, or stationary keeping your radio safe is important. This is just a simple cover designed to slip over the face of the Yaesu FTX-1 it can use either a hair band, or elastic cord to secure it to the…

Pobrania
369
Polubienia
17
Ocena
5
P
Printablespvillano

Customizable dual perspective name plate

In order for this to work, all letters must be the same height, and there must be no spaces. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Notes: You might want to use support blockers in some tricky areas.…

Pobrania
369
Polubienia
16
Ocena
0
P
PrintablesJoker_G

Helicopter Mi-8, Mi24 Collective

I haven't printed this last version of the part with all the switches, yet. Please share your results if you print it. Don't forget to like and comment. This collective grip has: 3x axis 1x 4-way hat switch 4x press-buttons Print: Printed…

Pobrania
362
Polubienia
57
Ocena
5
P
PrintablesRobot Hand Made

Prusa Protective Shield 6pcs Stack Vase Mode ReRemix

This is modifed version of the initial vase mode design. Primary goal was to reduce print times and plastic use for PLA disposable printing... This design compared to RC2 uses 3 to 4 times less plastic and is usable... It is much improved…

Pobrania
360
Polubienia
1
Ocena
5
P
Printablesh3li0

protective case · apple magic mouse 2

protective case for apple magic mouse 2 created in fusion 360 photos show printed in black matte pla and white matte pla model is separated into the two 3mf files , one for the case , and another for the sleeve (that prints in spiral vase…

Pobrania
360
Polubienia
76
Ocena
5
P
PrintablesPieti

NANO Prusa Protective Face Shield + 8x Stackable!

I modified the RC3 version to make it even smaller in height, which saves about 1/3 Filament per print. Logos/Texts are also removed for higher printig speeds. Print 2 complete Shields (Headband & Bottom) in under 2 hours! Update I've…

Pobrania
355
Polubienia
0
Ocena
3,5
P
PrintablesBrunoLeScribe

Zombicide Weapon and Objective Crate

Give some contrast and relief to your Zombicide Weapon and Objective Crate with those simple models ! I mixed both 1st and 2nd Edition material in my games, specially for Weapon and Objective, where I prefer Weapons marker from 2nd…

Pobrania
350
Polubienia
33
Ocena
5
P
PrintablesMZ4250

Bone Collective

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…

Pobrania
348
Polubienia
91
Ocena
0
P
PrintablesDaire O Connor

Ozempic Pen Protective Case

This carry case can hold 1 Ozempic pen and 4 needles safely and securely. Ideal for travel. The hinge and clasp use M3X30mm bolts. You will need 6 of them for a complete case. There is a gasket that 1.75mm TPU can be used to created a…

Pobrania
341
Polubienia
45
Ocena
5

IKEA Skadis protective glasses holder

This is IKEA Skadis protective glasses holder. This item is inspired by IKEA SKADIS Collection by CSD Salzburg, it uses the same hook system (I included the hook). Check out the collection of other IKEA Skadis holders I made . Update…

Pobrania
337
Polubienia
64
Ocena
4,91
P
PrintablesK-Lab

The Quacks of Quedlinburg - protective token shell case / (DE) Die Quacksalber von Quedlinburg - Spielstein Schutzhülle

Why I created this After 2-3 game sessions I spottet some wear on some tokens. To preserve a nice appereance of the tokens I created this protective shell / case. Print instructions Works best with a flat print surface (not textured).…

Pobrania
326
Polubienia
68
Ocena
5
P
PrintablesJohan Fuhri

Accu-Chek Instant and Accu-Chek Active Protective case

Protective case with printable inserts for either the Accu-Chek Instant or Accu-chek Active blood glucose meter. The insert has space for the glucose meter, lance and test strips. The Instant insert also has space for spare lances. There…

Pobrania
326
Polubienia
28
Ocena
0
P
PrintablesSebastian

Protective Cases for AirTag Accessories

Pendant case to attach an AirTag accessory to a bag or backpack. The rounded corner case can be used to put an AirTag accessory into a bag or suitcase and still protect it from scratches. Print out the lower and upper part, insert the…

Pobrania
321
Polubienia
31
Ocena
5
P
PrintablesSablebadger 3D

Objective Markers - Graveyard Stones

Need some cool objective markers in a graveyard setting? I made a set for your fantasy table that really punches it up a notch! This set is a set of headstones, with optional numbers to use for marking important locations. If you like…

Pobrania
318
Polubienia
76
Ocena
5
P
PrintablesCory

Quacks of Quedlinburg Protective Single Print Token Case

This is a remix of another Token case. I wanted something that was a little more sleek but still protective. I made it a lot smaller all around, and the opening on the back the same shape as the token instead of just a circle. I also…

Pobrania
307
Polubienia
29
Ocena
5
P
Printablesjirka

Prusa protective face shield visor shape template

EN: Prusa Protective Face Shield punching and rounding template for visor. It is based on the dimensions given here:…

Pobrania
304
Polubienia
1
Ocena
5
P
Printablestrevor229

50A Anderson PowerPole Protective Cap

Took measurements of a 50A connector and basically remade it with divets instead of pins and a small ramp on the inside to make disconnection a bit easier on the plastic. It fits quite tight in there, about as tight as another connector…

Pobrania
303
Polubienia
24
Ocena
5
P
PrintablesSteve

Protective Goggles (Non-foldable)

The protective goggles were designed to help medical workers or any other users, who are at risk of getting infected with the SARS-CoV-2 virus that causes the COVID-19 disease. It presents an alternative to face shields. This model…

Pobrania
303
Polubienia
7
Ocena
0
P
Printablesfrdzmn

Protective caps for a Black Diamond Raven ice axe

I designed these caps to safeguard my ice axe (model Raven by Black Diamond). I used them to cover the sharp edges during flight and transport as well as while hiking. I printed them in PLA and they worked well as intended. However, the…

Pobrania
302
Polubienia
17
Ocena
5
P
PrintablesFlo

Protective jaws / soft jaw for vice (parametric in FreeCAD) prism for HEUER FRONT 140 and others

The gcode fits for HEUER FRONT 140 with replaceable jaws. With the FreeCAD file (.FCStd) you can easy customize the protective jaws for many other vices. In particular, round or oval workpieces can be securely clamped and worked.

Pobrania
301
Polubienia
43
Ocena
5
P
PrintablesWes

Protective Face Shield with Wider Coverage to Temples, covered top

This is a remix of the Prusa Protective Face Shield RC2/RC3 to extend the face shield so that it wraps around closer to the temples to provide more side protection, and adds an integrated top cover similar to the Prusa top cover. I also…

Pobrania
299
Polubienia
3
Ocena
0
P
PrintablesBetto

Protective Face Shield - Clips/no hole punch needed

This is a remix of the high speed print version of the Prusa Protective Face Shield. It uses 3d printed clips eliminating the need to punch holes in the plastic sheet. The clips are slid onto the frame over the plastic to hold it in place…

Pobrania
299
Polubienia
1
Ocena
0
P
PrintablesAD3D

Protective Case for Arduino UNO Q

This is a thin but strong protective case for the Arduino UNO Q, showing some electronic components of it and as well as having gaps for USB-C and QWICC connections, which are common with Arduino. The best part? No screws needed! Just…

Pobrania
298
Polubienia
15
Ocena
4
P
PrintablesNeil Barker

UH60 based heli sim collective

This is not a 1:1 reproduction as I modeled it from images with no references other than “feel”. However it is good enough and works well enough and has done for a good many months now with heavy use. Partly recorded the journey on the…

Pobrania
298
Polubienia
41
Ocena
5
P
PrintablesAlexey H

xt90 male protective cap

xt90 male connector protective cap has a convenient hole to be able to tie it to the wire so you will not lose it As connectors are slightly different, you may want to scale a bit (0.5-1%) to fit your exact xt90 male plug

Pobrania
294
Polubienia
22
Ocena
0
P
PrintablesChristian Glodt

Protective Cover for Braun Series 9 Pro Shavers

The Braun Series 9 Pro shavers come without any protective covers for the blades. This model is a snap-on cover for the shaver that protects the blades, eg. when traveling. The holes on the top provide ventilation, in case the shaver is…

Pobrania
293
Polubienia
22
Ocena
5
P
PrintablesXavier Faraudo

Protective lens case

Overview The case is made of 4 pieces: 2 knurl-padded inserts, that are to be printed in TPU/ flexible/semiflex. 1 outer case part with an outwards screw thread (like a bolt) 1 outer case part with an inwards screw thread (like a nut) The…

Pobrania
291
Polubienia
106
Ocena
4,2
P
PrintablesWhitey4405

Samsung A15 Protective Case

A snap-fit Samsung A15 phone case to protect the phone exterior. It is recommended to print the case on the back face. However, depending on the print setting used, the underside radius form (shape) nearest the print bed may need some…

Pobrania
288
Polubienia
8
Ocena
0
P
PrintablesZack Freedman

Protective Sleeve for Rosewill RSV-Series HDD Sleds

Rosewill doesn't sell spare caddies for their RSV-4412 cases and RSV-SATA-Cage-34, but if you've somehow got spares, don't leave them naked and afraid. Enrobe them in this handy protective sleeve. You should probably print this in…

Pobrania
288
Polubienia
99
Ocena
0
P
PrintablesOver.F
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
287
Polubienia
48
Ocena
5