Liczymy pasujące modele…
Build Guide Bill of Materials FAQ Open Beta Fileset (not all components complete) Buy hardware or printed parts at SilverFoxIndustries A spiritual successor to the Gryphon, though not a replacement. Leaning further to the direction of…
Silver is 100% scale. Black one is 200% scaled up size. You can print it 100%, 150% 200% or more. Print instructions No supports required. It prints easily on Prusa MK3 with default settings. Wheels should rotate easily right after…
Because my girlfriend sat on my wand from first attempt ( https://www.thingiverse.com/thing:2508722 ) and broke it, I searched another, because model from TonePLA was too much symmetrical and didn't look like from movie. I decided to make…
Model of the Elder Wand from the Harry Potter series. This is a 2-part wand which goes together without magnets or glue. The joint isn't noticeable. The assembled wand is 15" / 38cm long. .02mm layers 2 walls 15% Infill The print profile…
Print with PETG Z=0,3 Attach dog rope to it and slip it into the car safety belt lock. You can also use 2 pcs and rope to fix luggage on the back seat.
1kg spool holder 1Kg spool holder large version https://www.buymeacoffee.com/teto121119u
Contenedor moleteado con tapa de rosca
4. Fedora. Why? Cause why not! … Maybe your 3-D printer needs a hat. Printing Difficulty: Normal Minimum size recommended: 1in
Dive into the depths with this groundbreaking 3D printable underwater torpedo! Powered by a revolutionary rubber band motor encased within its sleek design, this torpedo boasts toroidal propellers for unparalleled aquatic maneuverability.…
Herewith i want to show you one of my designs for a 3 Bladed RC boat propeller. Outer diameter: 45mm Bore diameter: 4mm Pitch: 50mm Height: 19mm Type: DriveDog 3,7mm
Herewith i want to show you one of my designs for a 3 Bladed RC boat propeller. Outer diameter: 40mm Bore diameter: 4mm Pitch: 50mm Height: 15mm Type: DriveDog 3,7mm
Designed these to fit under the two 1x2 pieces next to the nose. Print at 0.16mm layer height and ensure that the first layer is also 0.16mm, this way it will do 2 layers only.
This is a pool torpedo just like the ones I played with as a kid. Using a brim is advised because there is not much surface area in contact with the print bed. This model should also be printed using a high infill (75% ish depending on…
This is the model used to make the torpedo in this video: [video link]. It's very much a prototype - the final model had quite a few post-print modifications made to it. If I get time, I'll detail those modifications (that could probably…
Remixed from; https://www.thingiverse.com/thing:182332 & https://www.thingiverse.com/thing:819202 Someone in BtecBill's discord server asked for a Turtle wearing a fedora.. so I got to work and found 2 lovely models already so decided to…
Keeps annoying wasps and flies away
README: All stls are already in the correct print orientation. Motor: Any 29 series Samsung microwave blower- DE31-00029H, DE31-00029K, DE31-00029J, etc etc You can find these for decent prices on ebay. If you want to have the more common…
A stylish and fun tuxedo-shaped pen holder designed to bring personality and elegance to any workspace. This model was sculpted in Nomad Sculpt and is optimized for 3D printing — it also works surprisingly well in multicolor printing ,…
This is a colored model of Wario from Super Mario Brothers. By the talented "printedobsession".
Herewith i want to show you one of my designs for a 2 Bladed RC boat propeller. Outer diameter: 59mm Bore diameter: 4mm Pitch: 50mm Height: 19mm Type: DriveDog 3,7mm
This is a ⅓ scale working model of a Federal Signal STH-10. This siren uses a Samsung DE31-00029H microwave blower motor. It is also compatible with the 29K and 29J and any other 2.9/2.95" length Samsung motor. Credit to my boi Charlie…
This is a box for cotton swabs. At least the ones that can be purchased in most parts of the EU and Germany. It fits cotton swabs up to 8.6 cm in length. The cotton swabs I tested were 7.6 cm long (German once). It has a screw cap and is…
Not tested, print solid, throw and enjoy.
<<<text and pictures are not mine but reuploaded along with original model and licence, my own comment and pictures will be in the “make” section>>> Summary I printed the new hinge, but it didn't work very well with the old connectors. I…
<<<text and pictures are not mine but reuploaded along with original model and licence, my own comment and pictures will be in the “make” section>>> Secure cardboard at fixed angles. Each bracket to be used in conjunction with 2x Makedo…
🌊Introducing the Dive Torpedo Toy!🌊 As soon as it hits the water, this torpedo toy springs into action, filling up and sinking to the bottom within seconds. Print Settings: Use safe and durable filaments such as PLA, PETG, or ABS (I used…
Harry Potter Dumbledore Statue Figure
recommended 100 percent infill or else it will float.
A sunshade for the CFmoto 450mt speedometer, designed and 3D-printed by me, is a custom accessory created to enhance readability and reduce glare in bright sunlight. In addition to improving visibility, it offers protection against…
Optical illusion processed in HueForge. My first HueForge attempt. 200 x 200 Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA…
Lost a brick? Print spare Lego compatible parts on your 3D printer! Print the model for the part you're missing to complete your set. Some parts might need supports & I suggest 40% infill. Disclaimer LEGO®, the LEGO logo, the Minifigure,…
Replacement gear for BMW R1150GS speedometer drive - BMW RealOEM number 62122306287. There is probably no official replacement part of the plastic drive, so I took the original one and re-modeled it. Please note that dimensions of the…
Scale parts to 2.63% for 1:87/HO/OO/1.65mm gauge Includes optional/removable cover for turning gear & motor [edit April '26 - added a split ladle for upright printing]
After the Printables takedown of one of my Benchy cored models due to the original Benchy licence restrictions, I deleted ALL my Benchy cored models. With the recent release of the Benchy into the public domain it has opened the door to…
This is a remix of Mao Zedong's figure, I added platform to. Was made as a gift to my friend.
If you want to add option to your CORE One (+ and L too) Advanced Filtration unit to easily take it off, this model will be right for you. I wanted to have something to quickly and easily remove the filter, so I remixed the version for…
I made a wrench that would be easier to open the roof in the jeep wrangler. I hope you enjoy it! How it works: https://youtu.be/ewxSTHoA8SI My Instagram: https://www.instagram.com/3deshka.rf/
We have had our game of "Sorry!" since the children were young, in the 1980s. Now our grandchildren really enjoy playing the game too. But along the way we've lost some of the pawns. I thought that when I got a 3D printer I'd find designs…
Small torpedoboat for bathtub toys contest. Flat bottom for easier printing. Scale for wanted size.
Thank you for downloads, likes… Enjoy !
This is a speedometer for your bicycle - powered by an Arduino Nano. It uses a linear Hall effect sensor mounted on the front shock absorber and a magnet mounted on the front wheel in order to count the revolutions of the wheels. Using…
Tisk korunky inspirované ledovým královstvím. Provedl jsem úpravu a umožnil vložení imitace krystalu, realizování broušeným plexisklem a následné doplnění o modrou leddiodu s slotem na baterii.
2 Parted Keycap to make use of the Keyboard Backlight. The Keycap Base can be pressed in the Keycap and will stay in place - no glue needed. I made following Logos: Arch Linux Ubuntu SteamDeckOS Linux Mint Manjaro Fedora CachyOS May i…
Herewith i want to show you one of my designs for a 2 Bladed RC boat propeller. Outer diameter: 59mm Bore diameter: 4mm Pitch: 50mm Height: 25mm Type: DriveDog 3,7mm
This is a very high detail model of the US Navy Freedom class LCS. Recommend support blocks inside the mast otherwise it is very hard to remove the supports without ripping off the mast
I have printed many types of these cardboard screws for makedo projects and my kids kept breaking them, maybe they are just rough on toys…. Either way, I redesigned them and made them much stronger, I like to print them with 100% infill,…
Speedometer Clock Inspired by analog dials of a retro motorcycle. It shows time in hours and minutes in a pair dials which resembles a tachometer and speedometer. The time is fetched from the Time Server and constantly updates it. The…
Herewith i want to show you one of my designs for a 3 Bladed RC boat propeller. Outer diameter: 55mm Bore diameter: 4mm Pitch: 50mm Height: 16,2mm & 19mm Type: DriveDog 3,7mm
I designed this bow for my son. It's an easy to print bow. The strength of the bow is determined by what material and infill you use. I used PET-G for the limbs, but I'll try CPE later, as that will have a better flex/spring I believe.…
Jedovatý meč (v.1.) ze hry metin 2. Stojan bez supportů, 0,2mm vrstva. Meč tisknou lépe pod 0,2mm pro zachování detailů, doporučuji tisknout čepelí / špičkou čepele od podložky = rukojeť nahoře. Supporty u meče jsou nutností, i když jen…
This model is compatible with the lego system.
This model is compatible with the lego system.
The STL is for a 1:20 scale torpedo but can easily be resized in whichever software you use for 3D printing. I printed the main part of the torpedo in spiralize(vase) mode with adaptive layer height set to range from 0.04mm to 0.2mm in…
My take on the Wheeler take down pin install tool
More spare parts available: Air conditioning trim pack https://cults3d.com/es/modelo-3d/variado/air-conditioner-trims-for-seat-ibiza-ii I also have several spare parts for Seat Ibiza II: Spare hinge for the trunk tray:…
This is actually a full rework of the Redox keyboard. This model is called Redox Manuform as the second inspiration came from yet another keyboard design: the Dactyl Manuform. I wanted the Redox layout on a Manuform-like ergonomic design.…
Maceta redonda para plantas pequeñas, con drenaje incluido basado en el diseño de @Jago Schantz Especificaciones: Las macetas tienen dos tamaños de 80mm de diámetro y 100mm de diámetro. Las macetas tienen 50mm de altura. El grosor de las…
Cuando la silicona de los cristales se estropea hay que cambiarla, pero antes hay que despegarla, lo cual no es fácil. Con este accesorio que he diseñado se quita muy bien, pero hay que tener cuidado, pues es muy puntiagudo. Para eliminar…
The Northrop F-5 is a family of supersonic light fighter aircraft initially designed as a privately funded project in the late 1950s by Northrop Corporation. There are two main models, the original F-5A and F-5B Freedom Fighter variants…
Fun Screw-On pool torpedo that glides smoothly through water! You can change the weight of the torpedo depending on whether you would like it to glide or sink more. I used coins, such as pennies, to weigh the torpedo down. Make sure to…
You can paint the egg if you want! Stands up on its own. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Source: https://pinshape.com/items/14550-3d-printed-albedo Category: Models
Wonderful plug-in toy for all types of people.
Printed in PLA. No need to add supports. You must rotate the model so that the flat sides rest on the bed. For now it is an adhoc solution. The next step will be to update the code so that it can be parameterized and upload the .scad file
1913 Bugatti Type 22 Torpedo https://youtu.be/PVl3cEkSSo0?si=QV8NKKV6G-LAw_vm https://youtu.be/orNbJ3KgBIU?si=_lESjRb1NG5c3Ji0 Fewer than 5 made. Designed from screenshots from YouTube videos in blender Printing instructions Pieces fit on…
Printed with PLA layer 0,2 some parts need support, but i try to reduce to the maximum, Its my first complicated model that fit perfect on the great Chasis from Dukedok, that you can download and build yourself from here. Gracias amigo…
Round bottle 47mm high x 47mm diameter.
A statue modeled and painted of a bernedoodle dog, but looks very similar to other dogs (especially other doodles). Print multicolor with your dog's colors, paint the model in the slicer to match your dog, or print single color. Great to…
Flat and round pocket whistle / Silbato de bolsillo plano y redondo
This is a series of slide-together trays, to store and organize the Makedo Discover set of cardboard box construction tools. https://www.make.do/collections/all-products/products/a0126-discover The "SCRU"/"SCRU XL" drawers are…
This is a set of pieces that can be used to recreate a Greedo figure at 500% scale. This figure was introduced as part of the Mos Eisley Cantina set released in 2018 and was also included in the expanded Mos Eisley Cantina set released in…
Simple remix to accept filament from below rather than above. https://www.thingiverse.com/thing:3052488 Print instructions Category: 3D Printer Accessories
Introduction I liked the idea and the look of Oogway´s Speedometer Clock but i don´t liked the printed watch face, because i don´t get it printed nicely. So i decided to make a remix for a plotted watch face. The idea was to create a…
An editable european licence plate keychain, with text editable in the slicer (i use OrcaSlicer) in the object section (like the second image). It is a Facedown Print to have a nice finish. Hope you guys like. One file without the country…
Download here 👇🗃🔗: https://payhip.com/b/7yqBZ 👆🗃🔗 https://payhip.com/b/3qbM8 1.5$🛒🎁See more: https://payhip.com/b/b3RGZ 3D Printed NeeDoh Elf on the Shelf Outfit High quality here 1$ :https://payhip.com/b/ethab
<<<text and pictures are not mine but reuploaded along with original model and licence, my own comment and pictures will be in the “make” section>>> Summary As I couldn't find a hinge that works for makedo screws that I can take apart I…
No Supports needed. There is a hole for attachment at the birds head. The print files contain two turtledoves.
A board game insert to hold all of the components of The Druids of Edora. This insert is designed to get rid of all the plastic bags and have a clean storage solution. Printing instructions: BoardTray has to be printed with support, so…
Sorry, this variation of the Gryphon is effectively obsolete. Though the original design still has its merits for all the community-derived and compatible parts and being very easy to make more derivatives from, this variant of the…
This model is compatible with the lego system.
Das ist der Elderstab von Professor Albus Dumbledore. Von dem Film Harry Potter.
⚠ This project is for Educational Usage Only ⚠ You can freely use this to work with LEGO Education like Mindstorm, Wedo and others This project is inspired by retired LEGO product - Triangle Ruler Item No: bb0342 Key Features: Bigger…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…
Dieses Teil verhindert, dass die Spindel der Z-Achse wobbelt
Simple design with good support for the hat. Made for my brother-in-law.
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Roll it to do close-range chip damage, throw it for a long range homing blast: the torpedo! About the size of a marshmallow, this is either a large keychain or a nice desk ornament. Everything should snap together with press-fit…
Base Redonda con pies para múltiples usos
Tuxedo Sam (Hello Kitty's friend) (タキシードサム, Takishīdosamu) Tuxedo Orville J. Sam Category: Sculptures
Because my second little printer Bresser raptor 3D ( or TINA2 ) has only holder for 0.5 kg filament so I decided to make a better coil holder which is 1kg and of course bigger. I recommend printing from PETG material to a line thickness…
PLEASE APPROACH NEXT STEP CAUTIOUSLY To place the pin into the hinge, cut a piece of filament about 2-3 inches. Heat up the hotend to 170 degrees. Cautiously, hold the filament and put it into contact with the hotend until it melts it…
Simple torpedo / rocket shaped toy, designed to be printed with 0% infill so it floats and used as a water toy in the pool or bathtub. If not sealed it will start to soak up water and may become moldy, though I haven't had that issue…
made done NeeDoh gcode modell for yall
This design is an upgrade for the spool holder in the TINA2. The holder will have some problems with the bigger spools since the height of the printer is small to start. Instead of giving it more height for clearance I chose to use the…
3D printable Lego compatible Ron Weasley and Albus Dumbledore models. Items listed with suggested filament hex color. Some bricks require stickers or painting after printing. Good accuracy is required to produce Lego compatible bricks,…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
![Dive Torpedo Toy [No Supports]](https://media.printables.com/media/prints/767379/images/5974251_8e66d367-0d90-4154-a72b-b37b631f00d4_d903432c-7cda-4c49-bf63-c3bb1d0571a9/untitled-v52-1.jpg)
