P
PrintablesJust Jasper
glasses holder modern (less fillament)
This is my moder glasses holder. I put focus on a tiny, compact and modern design
- Pobrania
- 132
- Polubienia
- 15
- Ocena
- 5
Wyniki wyszukiwania: filla
Liczymy pasujące modele…
P
PrintablesThe Game Breaker
Fillament friendly Raspberry Pi 3 mount with hole for Mini-Rack Raspberry Pi Mount
This simple modified version of the RPI 3 mount has a hole on the bottom. Less filament to print without compromisring strengt Should allow for slightly better cooling
- Pobrania
- 47
- Polubienia
- 6
- Ocena
- 0
P
Printableslt_kraken
Modular Fillament Guiding System
So I bought a 2.3 KG fillament spool which didn't fit on the default spoolholder and due to its weight I didn't feel comfortable printing a longer spoolholder. This has led me to designing my own clean modular fillament guide system. At…
- Pobrania
- 28
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMikyleee
Bambu Lab AMS Rear Desiccant Refillable Tray
Edit V3: Logo rotated 180° and tiny gap in bottom left and right has been fixed! I didn't want to have to keep buying the correct size sachets from BL as they're expensive and don't last long at all. There's lots of similar versions to…
- Pobrania
- 16 482
- Polubienia
- 2708
- Ocena
- 4,98
P
Printableseds_3d_shop
Refillable Charcoal / Activated Carbon Filter Replacement for Bambulab X1 / P1S / Upgraded P1P
Update 16.02.2025 : The newer X1C/P1S have minimally smaller filter niches (very tight tolerances) - I have now adjusted the size. Now fits this version the old AND newer X1C/P1S perfectly! 👌😊 It was time to replace my activated carbon…
- Pobrania
- 13 224
- Polubienia
- 767
- Ocena
- 5
P
PrintablesAgustin Arroyo
Piggy Bank - Filla Fella
Want to support my work and even sell 3D prints of some of my designs? Check the following links. Patreon: http://www.patreon.com/flowalistik Donations: http://www.paypal.me/flowalistik --- Piggy Bank Filla Fella. Download the original…
- Pobrania
- 1815
- Polubienia
- 257
- Ocena
- 4,84
P
PrintablesFabianVeile
Refillable Gravity Pencils + Ergonomic Grip Cover
Hi, I always wanted an affordable, uncluttered and reliable mechanical pencil that I can always carry with me. This is the 3d printed solution I came up with. It's a simple mechanism, allowing you to adjust the length of the leads using…
- Pobrania
- 1681
- Polubienia
- 779
- Ocena
- 4,56
P
PrintablesMeyui
Tea Stand – Refillable Slot Organizer for Tea Bags
A clean rhythm for daily brews. This modular, refillable tea bag dispenser is designed to balance functional clarity with thoughtful form. Tea bags load from the top and dispense smoothly from the bottom, echoing the efficiency of a…
- Pobrania
- 1540
- Polubienia
- 636
- Ocena
- 4,67
P
PrintablesCNC Kitchen
Refillable Charcoal Filter for BambuLab X1
This is a refillable Activated Charcoal Filter Box for the BambuLab X1. The filter medium should be replaced every 50-100h or as soon as you start smelling your ABS prints again. It saves you money and reduces waste! Best used with…
- Pobrania
- 1488
- Polubienia
- 435
- Ocena
- 4,91
P
PrintablesSkyTree
Refillable Filament Spool
This simple spool is used to eliminate the need to throw away a filament spool each time you purchase filament. Filament refills are readily available and easily drop onto this refillable spool. Print spool parts A and B and put them…
- Pobrania
- 1373
- Polubienia
- 474
- Ocena
- 5
P
PrintablesIconic FAB
Bambu Lab X1 / X1C / P1P Activated Carbon Air Filter (Refillable)
General I was unable to find a refillable activated carbon air filter (box) for Bambu Lab X1 / X1C / P1P so I rolled up my sleeves and designed my own version. Features Allows to save a decent amount of money using this instead of the…
- Pobrania
- 988
- Polubienia
- 218
- Ocena
- 5
P
Printables75echo
Bambu labs refillable carbon filter cartridge
Print in ASA or ABS. 30% infill , no supports. Activated carbon can be purchased in kilos on the Internet and in aquarist supply shops. Edit- At your request , I have added a version with smaller mesh holes for the smaller 'Nevermore'…
- Pobrania
- 897
- Polubienia
- 185
- Ocena
- 4,88
P
Printablesvkobz
Refillable Disc System Notebook (Discbound/Circa/TUL/Arc Junior 8 discs)
A fully printable refillable disc notebook! Compatible with half letter, junior, or A5 refill paper (common size refills for 8 disc planners like TUL, Circa, Arc, or other Discbound systems). I used a Happy Planner hole punch to create my…
- Pobrania
- 873
- Polubienia
- 233
- Ocena
- 5
P
PrintablesLasse Lauesen
Ender 3 S1 Hypnotic Fillament Visualizer
Wanted a simpler version of the Hypnotic Extruder Visualizer, that fittet the Ender 3 S1 Sprite Extruder. It's two parts that i printed in PETG with 0.2mm layer height. They are made to pressfit onto the extruder stepper motor axle, and…
- Pobrania
- 631
- Polubienia
- 62
- Ocena
- 4,86
P
PrintablesEngidahvs
Bambu X1C Side Mount Spool Holder v2 for Filler - Fillament Holder
Start with BC's excellent spool holder mount, add in a touch of BobbyMcWho's simplified back, incorporate Aikano9's adapter for HugoG's wonderful Filler - Filament Holder, add a chamfer to use less support and there you have it. All…
- Pobrania
- 539
- Polubienia
- 94
- Ocena
- 5
P
Printables3dprintedman
Refillable Journal/Notebook
This is a 3d printed journal that is very easy to make. It uses standard 8.5" by 11" printer paper, making it convenient to print custom pages on an old fashion 2d printer. Just adjust the 2d printer settings to print 4 sheets per page…
- Pobrania
- 475
- Polubienia
- 138
- Ocena
- 5
P
PrintablesDreijer
Bambu Lab AMS Rear Desiccant Refillable Tray - Easily dryable
I made this remix to make the holder dry the desiccant efficently. With a better chance for airflow. No support needed.
- Pobrania
- 428
- Polubienia
- 75
- Ocena
- 4,88
P
PrintablesSteve
DampRid Container - Refillable with Damp Rid Crystals
DampRid Container. There are 3 parts: the container, the tray, and the lid. Fill the tray with the DampRid crystals. The tray then sits on a shelf within the container to keep it raised up so water can collect on the bottom. Added a…
- Pobrania
- 409
- Polubienia
- 28
- Ocena
- 5
P
PrintablesCreat3D_Australia
Creality K1C / K1 - Refillable Carbon Filter
I couldn't find any replacement carbon filters like the standard one that comes with the K1C, so I designed this to be refillable with activated carbon pellets. The lid snaps into the base, and is easy to open when its time to replenish…
- Pobrania
- 404
- Polubienia
- 65
- Ocena
- 5
P
PrintablesDaten
Master Spool (Refillable Filament)
This is a master spool designed by myself with inspiration with some others that are available. It fits on a 200x200 print bed. It has multiple holes to reduce the filament cost when printing, It also contains 3 filament storage paths on…
- Pobrania
- 399
- Polubienia
- 27
- Ocena
- 4
P
PrintablesArenduk
Audi testing fillament
Hello, here is a file to test the filament and the printer. It is a small audi quattro, fast to print. For a better test I recommend to print with 0.07mm (ULTRADETAIL) .
- Pobrania
- 389
- Polubienia
- 41
- Ocena
- 4
P
Printablesekoscape
Ant & Cockroach (Roach) Bait Station – Pet-Safe, Refillable, Reusable
This is a refillable insect bait station designed to attract and trap ants, cockroaches, and similar pests—while keeping pets and curious paws out. The low-profile entrance allows insects to easily access the bait, while the enclosed…
- Pobrania
- 382
- Polubienia
- 31
- Ocena
- 5
P
PrintablesMake It Lab
Airless Basketball Model – Fillamentum PEBA
This is our new airless basketball model designed for the amazing Fillamentum PEBA filament! This airless basketball filament has one of the best bounces we have tested, and also has amazing durability as well. Since the Kimya PEBA-S…
- Pobrania
- 361
- Polubienia
- 25
- Ocena
- 0
P
PrintablesStoo
Refillable Spool for ELEGOO refills - Snapmaker U1 and Bambu Compatible
Tested on the Snapmaker U1, should work on the BambuLab A1/mini AMS units too.
- Pobrania
- 356
- Polubienia
- 38
- Ocena
- 5
P
PrintablesJacob Thompson
Dish Wand Refillable Soap Scrubber Holder for Kitchen Sink
I made these holders for our dish scrubbers at our apartment Note - the refillable soap one will only work with the replacement sponge heads, for some reason those are totally different than the first head that comes with the scrubber.…
- Pobrania
- 337
- Polubienia
- 102
- Ocena
- 5
P
PrintablesAdam Brown
Nespresso refillable pod tools
Hopper and tamper for use with Nespresso refillable coffee pods Printed in PLA, 0.2mm
- Pobrania
- 299
- Polubienia
- 62
- Ocena
- 5
P
PrintablesDarthxRinzler
Bambu X1C Side Mount Spool Holder for Filler - Extended Fillament Holder
I took Engidahvs' model, along with the PC4 M10 arm from BC, and extended it out 25mm to be more centered with the spool. I then joined them so it can be printed as one, solid model and added an elongated support so it's sturdy. This is…
- Pobrania
- 297
- Polubienia
- 49
- Ocena
- 5
P
PrintablesRhiz0Matics
Qidi Plus 4 Hepa Filter, flush fit with refillable carbon.
a remix for folks with fitment issues is here: https://www.printables.com/model/1184276-qidi-plus-4-carbon-filter-hepa-filter We've been doing this all wrong! the carbon filter should go first as a prefilter, it will actually help the…
- Pobrania
- 273
- Polubienia
- 51
- Ocena
- 4,75
P
Printablesstrangnet
Fillamentum Sampler and Case
A recreation of the Fillamentum Sampler . Update 22/9/21: Added a little holder for 20 samples. It should have enough tolerance to give the samples some wiggle room. Update 25/9/21: Added a see-through lid.
- Pobrania
- 244
- Polubienia
- 53
- Ocena
- 4,8
P
PrintablesCouleurastas
Refillable filament spool
filament spool you can unscrew for easy refill The spool as a standard 1 kilo size can be used with 1.75 or 3 mm filament Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 10% External perimeter first !!!!Slicing tolerance:…
- Pobrania
- 230
- Polubienia
- 30
- Ocena
- 0
P
PrintablesMakerMylo
Master Refillable Spool - Filamentive Economy Spool Replacement for AMS/MMU/ERCF/Reprak
This is a simple no hardware required, easy to print spool, Simply cut away the cardboard spool and fit some cable wraps/ties around the filament, slide it off the cardboard, onto the plastic then screw the 2 halves together and snip the…
- Pobrania
- 224
- Polubienia
- 26
- Ocena
- 3
P
Printablesofer k
fillament dry box
silica gel box + fillament holder. this is a build made to hold a 3d printer fillament in a cornflakes box. the fillament is placed over two rollers with implanted bearings. three boxes hold alot of silica gel around the fillament. Print…
- Pobrania
- 217
- Polubienia
- 43
- Ocena
- 0
P
PrintablesNarlyB
Fillament Guide
I needed a filament guide that had an easy feed/entry I used a "PC4-M10 Male Straight" Pneumatic fitting (you can search for them online at your favorite store) I printed the cap for aesthetics. Fusion 360 file included. Print…
- Pobrania
- 197
- Polubienia
- 16
- Ocena
- 5
P
PrintablesDaniel Kasprowicz
Refillable cap for Dettol
Refillable cap for Dettol soap dispenser. All you have to do is drill a hole with a diameter of at least 20 mm into an empty original soap cartridge. Layer height: 0.15mm Supports: YES Material: It doesn't matter
- Pobrania
- 192
- Polubienia
- 28
- Ocena
- 5
P
PrintablesSimon Hebar
Fillable Kettlebell – 3D Printed Adjustable Weight (Up to 1 Liter)
Description: This is a fillable kettlebell designed for 3D printing and adjustable home workouts. Ideal for strength training, conditioning, and functional fitness, this model can be filled with sand, water, or other materials to achieve…
- Pobrania
- 190
- Polubienia
- 15
- Ocena
- 5
P
Printablesjack@meow
Refillable Charcoal Filter and Hepa for BambuLab X1 Carbon, P1S, P1P, X1
The HEPA filters: uses the same HEPA filter as BentoBox. It is 80mmx40mmx15mm you can get it on Amazon or Aliexpress
- Pobrania
- 188
- Polubienia
- 44
- Ocena
- 5
P
PrintablesTom Vít
Fillamentum NonOilen profile (Beta) for Bambu Lab X1C
Neither Bambu Lab Studio nor Orca Slicer contain a material profile for Fillamentum NonOilen , a great 100% recyclable material . ( More info about this material here .) ► I have prepared a material profile based on PLA and for use on…
- Pobrania
- 176
- Polubienia
- 17
- Ocena
- 5
P
PrintablesSimple
Fillament Spool to Drill Adapter with M8 Rod
A simple fillament Spool to Drill Adapter with M8 Rod. Needed Material: M8 Rod - about 15cm 2-4x M8 Nut (counter Nuts make it more secure, but 2 should work fine)
- Pobrania
- 173
- Polubienia
- 31
- Ocena
- 4,83
P
PrintablesKen Spicer
Fillamentum Rolling Tray
This is an original design I made specifically for Fillementum CPE HG100, though it should work in any food safe filament. The lower right corner is meant for a glass carb cap. STEP and F3D files included so folks can edit it themselves.…
- Pobrania
- 169
- Polubienia
- 37
- Ocena
- 0
P
PrintablesMatthew Walsh
1KG Fillament Stand
An easy Print filament Stand @ 50g filament used to print and mounts a 1KG roll. No Support is needed.
- Pobrania
- 159
- Polubienia
- 6
- Ocena
- 5
P
PrintablesBrian Dunnigan
Refillable Travel Baby Powder Container
I frequently travel with baby powder, but the containers are single use and that felt wasteful. I built upon dodasch 's spice container by adding a screw top sieve so that the container can be filled easier. I recommend using a funnel to…
- Pobrania
- 156
- Polubienia
- 24
- Ocena
- 5
P
PrintablesCoba Weel
Refillable ant bait station (not a trap)
WHAT THIS IS FOR I put the word "trap" in the title so it shows up when you search for "ant trap," but actually, trapping ants is not a very effective way to get rid of them. As long as the nest your ants are coming from is alive, it will…
- Pobrania
- 152
- Polubienia
- 5
- Ocena
- 0
P
Printableskiklhorn
Ikea Lack enclosure five drybox in row no fillament buffer needed
03/2025 update: New bottom spool rollers, the center autorewind replacement. Hardware used(pcs for one box): 2x 608, 2x 688 bearing, 6x M3x10 DIN912 screws. Five removable (sliding) dryboxes in a row on Ikea Lack Enclosure. author of…
- Pobrania
- 152
- Polubienia
- 26
- Ocena
- 0
P
PrintablesFliegerFriedel
Fillament storage box
english The box is designed to store unused filament spools in a dry place. The silicate container included for this purpose also prevents the filament spools from rolling back and forth thanks to its rounded shape. Print samples (24 x 24…
- Pobrania
- 150
- Polubienia
- 22
- Ocena
- 0
P
PrintablesPanzerDesign
Fillable heart potion bottle necklace magic charm pendant jewelry
Carry your magic potions with you in this heart-shaped potion bottle! Make a wish and store it inside! 0.20 mm layer, 0.40 mm nozzle 15% infill you might want a brim print bottle upright, print stopper top down scalable to 50% If worn as…
- Pobrania
- 149
- Polubienia
- 52
- Ocena
- 0
P
PrintablesMaybeSpooknik
Qidi Plus 4 Refillable Charcoal Filter
A simple design that allows you to use loose charcoal pellets to refill the exhaust filter on the Qidi Plus 4. This goes together well with the larger 8038 exhaust fan mod Support for 4 mm charcoal pellets + scorch, the Nevermore pellets…
- Pobrania
- 148
- Polubienia
- 37
- Ocena
- 5
P
Printablesengineererrant
Snap-Together "Master Spool" for Loose Filament (eSun Refillament)
A quick-printing snap-together spool for eSun's "Refillament." It sucks that, every time you buy filament, you're stuck with this absurd non-recycleable polystyrene spool that you just have to chuck in the garbage to be carted off to a…
- Pobrania
- 146
- Polubienia
- 18
- Ocena
- 5
P
PrintablesChristian Pedersen
Fillament spool holder Direct Drive Ender 3
Hi there - i was looking for a robust and good spool holder to mount on top of my Ender 3 v2 I recommend my filament guide here https://www.thingiverse.com/thing:4712122 to fit in front of the spool holder. There was some but was really…
- Pobrania
- 144
- Polubienia
- 27
- Ocena
- 5
P
Printablesmarigu
Fillament holder for PM spool
Filament holder for PM spool. ( https://www.filament-pm.cz/ ) Fusion360 file included if you want to modify it. Prusa i3 MK3 0.2 20 infill PLA no supports
- Pobrania
- 141
- Polubienia
- 13
- Ocena
- 0
P
PrintablesEric Charles
Dish Wand Holder - for refillable kitchen dish wand scrubber
Refillable dish wand holder that sits on the edge of the sink to drain into the sink. I didn't like the ones that held the wand upside down so that the soapy water gets all over the handle, so I made my own that doesn't have that problem.
- Pobrania
- 133
- Polubienia
- 12
- Ocena
- 0
P
PrintablesSourceror
Refillable 6-Ring Notebook (Parameterized)
Are you too precious with your notebooks? Are you particular about paper? Do you like binders, but wish they could fold back on themselves? If you answered yes to any of these questions, then this DIY refillable notebook might be the…
- Pobrania
- 132
- Polubienia
- 39
- Ocena
- 0
P
PrintablesPanicCarefully
Refillable Safe (Balloon) Cutter Knife
**** Hook-Blades are not standardized - brands/modells differ in sizes. Currenly follwing brand/modell are supported wolfcraft 4189000 I (e.g. Germany) STANLEY 1996 (e.g. France, GB, USA) Choose the available model file according to the…
- Pobrania
- 131
- Polubienia
- 25
- Ocena
- 0
P
PrintablesTanako
Steyr Filladapter Ring - Handadapter
We have a whole wall of tools for the various filling adapters in the club. In order to reduce the trial and error of each user, I have created an additional part that can be firmly attached to the adapter and makes the operation…
- Pobrania
- 125
- Polubienia
- 10
- Ocena
- 5
P
PrintablesAndrew_Sink
Filla Fella / Low Poly Remix!
Make your own Low Poly 3D models using my 3D Low Poly Generator ! From 135,760 to only 94 faces! Original Filla Fella designed by Agustin Flowalistik, so of course it's fitting to give this model a low-poly makeover! Printed on a Lulzbot…
- Pobrania
- 121
- Polubienia
- 22
- Ocena
- 4,75
P
Printablesjocin
Refillable Charcoal Filter for BambuLab X1 with HEPA-Filter
Remixed the awesome “Refillable Charcoal Filter for BambuLab X1” form CNC-Kitchen because i wanted to use a little HEPA-Filter + activated charcoal. Therefore added a inlay which sits on the HEPA-Filter so that i can fill the rest of the…
- Pobrania
- 120
- Polubienia
- 31
- Ocena
- 0
P
Printablesbart
fillamment guide ender 3v2
i made dis for my ender 3v2 leave a like if you like it
- Pobrania
- 120
- Polubienia
- 21
- Ocena
- 5
P
PrintablesBugman_140
FILLA LOG
Fillamentum have a great little guy and they are encuraging everyone to get creative and remix him into something new. so here is my FILLA LOG I hope you enjoy. Thanks Bugman If you like what I am doing please consider buying me a coffee…
- Pobrania
- 119
- Polubienia
- 39
- Ocena
- 5
P
PrintablesRod
Fillament Drybox
Combined a bunch of others drybox designs to create my existing setup. List of Purchased Parts: EZY Drybox 18L/19Qt from HomeDepot Metal Rod 5/16 x 36'' for Filament Spools also from Home Depot. I have a fine thredded rod but a smooth one…
- Pobrania
- 117
- Polubienia
- 35
- Ocena
- 4
P
PrintablesTom Vít
Filla Fella with Bowler Hat (no glue)
Quick remix of a community model by Flowalistik & Fillamentum – now with bowler hat instead of a flat head plus with a 3D mark on the shirt. Print instructions ► Print all three parts without supports, 100 or 150 microns are OK for layers…
- Pobrania
- 116
- Polubienia
- 14
- Ocena
- 5
P
PrintablesHand and Sew
Leathercraft Refillable Dye Pen Holder Stand - 15mmx6pc
Holder Stand for Refillable dye pens for IVAN 15mm dye pens for leathercraft , Holds 6 pc, full size 120mm x 80mm
- Pobrania
- 115
- Polubienia
- 33
- Ocena
- 5
P
PrintablesOskar Pärn
Fillament spool holder
I hold my spools on a shelf and wanted evry spool holder to be printed same as the color it holds. NEW IMPROVED VERSION
- Pobrania
- 113
- Polubienia
- 6
- Ocena
- 0
P
PrintablesEmperorArthur
Creality Ender 3v3SE Fillament Runnout Sensor Reverse Bowden Adapter
A reverse bowden tube adapter for the official Ender 3 V3 SE/KE sensor. Allows for the use of the original bracket. Important The sensor has the filament port slightly offset in both the X and Y direction. See the pictures for correct…
- Pobrania
- 112
- Polubienia
- 21
- Ocena
- 0
P
PrintablesJohnAdamPrints
Fillable Dumbbell
Fillable Adjustable Dumbbell (DIY / 3D Printable) This is a fillable, adjustable dumbbell designed for home use and easy 3D printing. Instead of fixed weights, the dumbbell can be filled with common materials like sand, rice, lentils, or…
- Pobrania
- 111
- Polubienia
- 14
- Ocena
- 0
P
PrintablesMMartynJ
Eibos Cyclops - Easy Access & Fillament change Spacer Assembly
Updated 25-02-22 Split main body, pivot back plate hex corrected to 7.1mm across flats for M4 nut I have designed this spacer and pivot assembly to make it easyer to change the filament on the Eibos Cyclops dryer. As good as the dryer is,…
- Pobrania
- 107
- Polubienia
- 26
- Ocena
- 5
P
PrintablesSagittarius Artworks
Fillamentum Filament Swatch
Print with 3 walls, 0,15mm layers and 15% infill.
- Pobrania
- 106
- Polubienia
- 16
- Ocena
- 0
P
PrintablesCyclone-6
EZ Print Gaslands Dashboard with Fillable Car Data Sheet
An EZ printed dashboard for the Gaslands miniatures war game. Includes a fillable PDF file to hold vehicle statistics. At 190x155mm, this is slightly bigger than the plenty of fine Gaslands dashboards out there, but none of them were…
- Pobrania
- 105
- Polubienia
- 17
- Ocena
- 0
P
PrintablesWolfe
Low Fillament Marker Stand/Organizer
My girlfriend wanted a stand to organize her markers with but everything I could find online used too much filament or was modular with no nice way to move them around as a unit. Considering she wanted a number of these I figured I'd just…
- Pobrania
- 105
- Polubienia
- 26
- Ocena
- 0
P
PrintablesVoxelity
Easter Fillable Candy Egg with Chick
Easter Fillable Candy Egg with Chick This model combines a fillable Easter egg container and a matching chick , creating a playful interactive Easter print. The egg is designed as a two-part container that can be opened and filled with…
- Pobrania
- 102
- Polubienia
- 23
- Ocena
- 0
P
PrintablesCreAlec
Fillament holder for every type of fillament
Try it out!
- Pobrania
- 100
- Polubienia
- 9
- Ocena
- 0
P
PrintablesBeathas
Refillable Travel Bottle Set — 3D Printable Shampoo / Cosmet
A set of 3D-printable refillable cosmetic bottles designed for shampoo, liquid soap, creams, hair products and DIY cosmetics. This model includes: ✔ Two bottle styles (straight & ergonomic curved neck) ✔ Screw-cap with internal threading…
- Pobrania
- 100
- Polubienia
- 8
- Ocena
- 0
P
PrintablesMindCubby
Easter Eggs - Fillable - Screws Together - Spiral Vase Mode - Seamless - No Supports
Key settings Object Plate Spiral Vase Bottom Layers Brim Top Half 1 YES 2-4 YES Bottom Half 2 YES 40 (enough for the threads) YES
- Pobrania
- 97
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMiha
Fillament Spool Roller-Holder
Bearings used: https://www.amazon.com/PANTZ-Bearing-Section-61804RS-Bearings/dp/B0CNR (2pcs 32x20x7) Threads M30
- Pobrania
- 94
- Polubienia
- 11
- Ocena
- 0
P
PrintablesDaniel Josvai
Filla Fella - Among Us edition
There is 1 impostor among us, fellas! Let me present you Crewfella (or Fillamposter, Among Fellas, Imposter Fella maybe?), the Among us style remix of the Filla Fella by Agustin Flowalistik. https://www.thingiverse.com/thing:3723234…
- Pobrania
- 92
- Polubienia
- 20
- Ocena
- 0
P
Printablesold-relic
Saturn S refillable filter
This is a container that fits inside the Elegoo Saturn S VOC filter. It replaces the carbon “brick” that Elegoo supplies. At the time of writing a replacement brick is not available from Elegoo. It might be available from third parties if…
- Pobrania
- 90
- Polubienia
- 20
- Ocena
- 5
P
Printablesmail4mail
Roughly designed fillament spool holder for any cubic kobra S1 (300mm diameter/2.5kg)
Note: the screw seems a little too tight when you first use it, but this is deceptive, just move it left and right a few times and it fits perfectly👍 (no force-> just moving step by step) Big Spool holder Anycubic Kobra S1 (print all 3…
- Pobrania
- 87
- Polubienia
- 4
- Ocena
- 0
P
PrintablesSmart3d By Gabriel Gomes
support fillament
3D model description suporte para rolos simples 3D printing settings layer 0.2 ou mais mínimo 30% infill
- Pobrania
- 86
- Polubienia
- 17
- Ocena
- 0
P
PrintablesDiPT
Bloody Filla Fella
A remix of Fillamentum's Filla Fella for the #SpookyFella2020 contest. Blade taken from https://www.thingiverse.com/thing:114957 Print the blood slowly, due to small extrusion sizes.
- Pobrania
- 84
- Polubienia
- 21
- Ocena
- 0
P
PrintablesDr.Peter
Spool/Fillament Holder
Use some rubber at the bottom for minimal sliding, you can also fill the bottom with sand if you use the linear infill and for example use filament change to pause and fill the model
- Pobrania
- 77
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDr Mahbuse
Fillamenttrockeneinsatzt für Silvercrest Dörrautomat
Sollte in temperatur bestandigen Material gedrückt werden
- Pobrania
- 77
- Polubienia
- 10
- Ocena
- 0
P
PrintablesGuyFromNL
Creality Fillament sensorbracket
Bracket for mounting fillament sensor and supporting cablemess on the gantry of the CR and Ender series printers. Enjoy Print instructions Print it upside down with legs in the air. Enable "Support everywhere" so the small clamp will be…
- Pobrania
- 75
- Polubienia
- 7
- Ocena
- 5
P
Printablesdiagowies
Nespresso Refillable Pod Tamper
This is a tamper for refillable Nespresso pods.
- Pobrania
- 75
- Polubienia
- 6
- Ocena
- 0
P
Printableshuskyte
Filler Roller in short for Fillamentum spools
A remix of the great https://www.thingiverse.com/thing:3020026 . It is just roughly 20 mm shorter and fits perfectly for the Fillamentum spools. Image for size comparison, left is the original size (but including a scale).
- Pobrania
- 75
- Polubienia
- 13
- Ocena
- 0
P
PrintablesRay
Creality Space PI Dryer Fillament Time and Temperature Chart
Simple Redesign of the filament dryer temps and time for the Creality Space PI Dryer. Can be printed without AMS or CFS if you pause and swap the filament on the text layer.
- Pobrania
- 73
- Polubienia
- 32
- Ocena
- 5
P
PrintablesSteeeve
Refillable Geberit Filter Typ 1
Just print it out without supports and stick flyscreen on both inside sides (I got scraps from a local dealer). Fill with activated carbon and be happy. Activated carbon can be ordered very cheap. I ordered 3kg at the time, which should…
- Pobrania
- 72
- Polubienia
- 6
- Ocena
- 5
P
PrintablessetCREATE
Foamex - Refillable Detergent Pod
Print it, fill it, throw it. Fill this pod with a maximum of 35ml of any washing machine liquid you want and throw it in the clothes. That's it. Foamex will slowly release the washing machine liquid as the clothes are being washed; it's…
- Pobrania
- 68
- Polubienia
- 51
- Ocena
- 0
P
PrintablesGliimps
Sci-fi Fillament Samples and Case
I was bored by plane looking filament samples and added some sci-fi elements to them. I also modified the Lid.
- Pobrania
- 67
- Polubienia
- 30
- Ocena
- 5
P
Printablesbartoduivel
Fillament Ring for JAYO fillament AMS Bambulab
great design made to fit
- Pobrania
- 66
- Polubienia
- 6
- Ocena
- 5
P
PrintablesJenni
Flashforge Finder 2 fillament arm
Fits snugly to the side of flashforge finder 2, holds filament even if it is the smaller sized original Dremel Filament Print the base on the side, and the peg standing up. You will need a screw to fasten them together. Ask me if you got…
- Pobrania
- 66
- Polubienia
- 5
- Ocena
- 0
P
PrintablesStoneAgeSkillz
Simple fillament spool roller
Simple fillament spool roller - fast print, easy to put together. Bearings, screws and nuts needed. Two wides included. One to fit standart spool wides and one to fit Fiberflex spool. Pieces to print: part A - 4pcs part B - 2pcs (wide or…
- Pobrania
- 65
- Polubienia
- 14
- Ocena
- 0
P
PrintablesMax Delissen
Neptune 4 (Pro) fillament guide
For when you have multiple spools installed on your printer. The print simply clips onto the top rail of the printer, and you can feed the filament trough. Printed with 0.28mm layer height, and 35% infill. (less is probably sufficient)…
- Pobrania
- 65
- Polubienia
- 10
- Ocena
- 0
P
PrintablesKiwiHuman
Fillament Guide for SOVOL SV06
A small loop to replace the Filament holder on the SOVOL SV06 to guide the filament path when using an external fillament holder this is much smaller than the original filament spool holder and can be useful if you need to fit the printer…
- Pobrania
- 64
- Polubienia
- 6
- Ocena
- 5
P
PrintablesRuebarb
Prusa CORE One/+/L Advanced Filtration Refillable Carbon HEPA Filter
Refillable Carbon Filter for the Advanced Filtration Holds 73gr of carbon pellets + The Voxel carbon Prusa ALVEO3D holds 65gr of carbon pellets You can now replace only the carbon when needed, also the HEPA filter is half the price. Note:…
- Pobrania
- 61
- Polubienia
- 38
- Ocena
- 0
P
PrintablesHand and Sew
Leathercraft Refillable Dye Pen Holder Stand - 10mmx6pc
Holder Stand for Refillable dye pens for IVAN 10mm dye pens for leathercraft , Holds 6 pc, full size 120mm x 80mm
- Pobrania
- 61
- Polubienia
- 15
- Ocena
- 5
P
PrintablesAG
Ikea Skadis Deluxe Fillament Spool holder with roller bearings and scales!
I was massively impressed by InterlinkKnight's Digital Spool Holder project, but wanted one that could be mounted on my Ikea Skadis pegboards. The design of the spool holder is very good - if you want a super quality filament holder with…
- Pobrania
- 61
- Polubienia
- 27
- Ocena
- 0
P
Printablesgnat
Refillable Reused Inland Spool
I've collected many empty spools over the years to keep them out of the landfill, but I've never had a plan for them. Recently I found that Inland (my goto filament) has expanded their spooless refill offerings to include more colors, so…
- Pobrania
- 58
- Polubienia
- 16
- Ocena
- 5
P
PrintablesLee David
Polar Filament Cardboard Spool Spacer for Bambu Refillable Spools
Polar Filament's carboard spool edges were breaking down in the AMS. This spacer allows you to rip the sides off the Polar spool and install in a Bambu refillable spool. Some of the spools are tighter than others, I have included the step…
- Pobrania
- 58
- Polubienia
- 9
- Ocena
- 5
P
PrintablesSheyMo
Fillable Magnum Rounds
Hello all, to give this and all other revolver replicas a little more weight, I have redesigned the cartridges and provided them with a screwable head. The XL version is a little larger, holds 21 steel balls and brings 8.3g on the scale,…
- Pobrania
- 57
- Polubienia
- 5
- Ocena
- 4
P
Printablesagdewijn
Refillable Nespresso Pod Filler and Tamper
I designed these to help in filling reusable original style Nespresso capsules. I use these with SealPod capsules, but they should work with other brands too.
- Pobrania
- 56
- Polubienia
- 8
- Ocena
- 5