P
PrintablesChillora
Netgear GS308EP 10 inch Rackmount
3D printed rackmount enclosure for the GS308EP (should also work for GS308EPP model)
- Pobrania
- 941
- Polubienia
- 52
- Ocena
- 4,88
Wyniki wyszukiwania: gs3
Liczymy pasujące modele…
P
PrintablesAxel
NETGEAR GS308E 10" Rack Mount
A 10" Rack Mount for the NETGEAR GS308E Managed Switch . Features The sides include a honeycomb structure for better airflow. Two small screws can be mounted on the floor part which will hold GS308E in place. Printing The print takes a…
- Pobrania
- 443
- Polubienia
- 22
- Ocena
- 5
P
PrintablesGuillaume Gendron
Netgear GS305 switch under-desk mount
Switch dimensions: 94mm width 26mm height without the feet mounting holes: 6.5mm diameter 35mm center distance
- Pobrania
- 442
- Polubienia
- 54
- Ocena
- 5
P
Printables3DPTR
Netgear GS316/EP Switch 19" Rack Mounting Brackets
This is rack mount tabs for a Netgear GS316 series switch. The rear bracket uses M3 screws to replace the existing screws in the back of the switch.
- Pobrania
- 401
- Polubienia
- 29
- Ocena
- 5
P
PrintablesBenni
Netgear GS308 Switch wall mount
Wall mount (invisible screws) for Netgear Switch GS308T
- Pobrania
- 373
- Polubienia
- 26
- Ocena
- 5
P
Printablesmasiakla
Netgear GS305EP 10inch rack mount
Originally model was prepared for GS305EP switch, but considering size of other GS equipment, it should accommodate most of them. Model has tolerances, so switch does not have to be forced into it. End plate requires M2 screws, holes are…
- Pobrania
- 263
- Polubienia
- 22
- Ocena
- 5
P
PrintablesFirstGuardian
Netgear GS305 GS308 mountingbracket
Mountingbracket for Netgear switch GS305 or GS308 with a height of 29mm
- Pobrania
- 247
- Polubienia
- 22
- Ocena
- 5
P
PrintablesEHY_3dp
Netgear GS308 Series 10-inch Rackmount
Requirements: M4 x 10 screw * 2 M4 Threaded insert * 2 (optional)
- Pobrania
- 237
- Polubienia
- 16
- Ocena
- 5
P
Printablesthomasvnl
Netgear GS308 Switch Stacked Wall Mount
Needed a way to mount two GS308E Netgear switches onto a wall on top of each other to conserve space so designed these wall mounts that fit around the switches. I have left room below the switches to pass cables, and left gaps between the…
- Pobrania
- 233
- Polubienia
- 25
- Ocena
- 5
P
PrintablesJosh
Netgear GS305 10" Rack Mount
10" server rack for Netgear GS305 5 port switch. Pretty simple design, I printed face down using mouse ears.
- Pobrania
- 218
- Polubienia
- 11
- Ocena
- 4
P
Printablesmariospinaci
Ikea Skadis - Netgear Switch 8 port Unmanaged Gs308
Support to be able to hang Netgear Switch 8 port Unmanaged Gs308 stand. Print height 0.2 also it is recommended to add custom print supports for the hooks behind.
- Pobrania
- 195
- Polubienia
- 13
- Ocena
- 5
P
PrintablesCharly BEGOOD
Netgear GS308 vertical holder
You can fix it with double adhesive face or 2 screws Printer settings : Material : PLA Infill : 20% Support : no
- Pobrania
- 146
- Polubienia
- 19
- Ocena
- 4,5
P
PrintablesJP Guitars
Netgear GS308 Under Shelf Mount
I wanted to move my switch off of the shelf to make it easier to access, so I designed an under shelf mount. It prints fine without supports if you print it with the back downwards. I've included CAD files if you want to remix it.
- Pobrania
- 133
- Polubienia
- 13
- Ocena
- 5
P
PrintablesLegufix
Wallmount for NETGEAR GS305 LAN Switch
Since the wall mounts I found with a quick search didn't really appeal to me, I developed my own version. The wall mount consists of 2 parts that are screwed by means of M3 screws and threaded inserts. The switch is tightly enclosed by…
- Pobrania
- 127
- Polubienia
- 14
- Ocena
- 0
P
PrintablesMint
Netgear GS316EPP/GS316EP 16 Port Switch holder for 19 inch server rack 1U
I found that most 3D printing 19 inch server rack holder designs for Netgear GS316EPP and GS316EP 16 Port Switches were either too large for my heated bed (23.5 x 23.5cm) or had too much unused space . So I decided to make one of my own,…
- Pobrania
- 127
- Polubienia
- 10
- Ocena
- 0
P
PrintablesStefan
Absaugtrichter Metabo KGS305M
Das obere Teil wurde aus PLA gedruckt, ggf. wäre hier PETG nicht verkehrt. Das untere Teil kann an das Oberteil angesteckt werden und wurde aus TPU 95a gedruckt. Mein TPU war leider etwas feucht und es wurde zu langsam gedruckt, deshalb…
- Pobrania
- 123
- Polubienia
- 16
- Ocena
- 5
P
Printablesfuzzymakes
NetGear GS308E 10" Mini Rack
Here is a print that will fit diagonally on a Creality K1c. I printed it in PETG This design will mount an 8 port Netgear switch in a 10" mini rack for my raspberry Pi's. There are ventilation holes which also aid in reducing the amount…
- Pobrania
- 115
- Polubienia
- 4
- Ocena
- 0
P
PrintablesFranz
![Netgear Switch Wall-Mount [GS308, S350 Series]](https://media.printables.com/media/prints/460635/images/3783683_5042795b-299b-464b-890b-50ccf43c28fc/img_20230423_134931.jpg)
Netgear Switch Wall-Mount [GS308, S350 Series]
You need: 1 of each of the 4 models 4x M3 heat set inserts 4x short M3 countersunk screws 4x countersunk screws for your preferred wall mount solution Print the outside brackets with the outside on the build plate, so no support is…
- Pobrania
- 114
- Polubienia
- 11
- Ocena
- 5
P
PrintablesGabriel Martins
Netgear GS305v3 Rack Mount (10" or 19")
Theres the STL and the Ondsel file, i printed it at 100% and it worked ok, Only change i made after print was add a 1mm fillet on the recepticle to make it stronger but its manly aesthetic. Use a Brim, the side where there is no holes…
- Pobrania
- 113
- Polubienia
- 15
- Ocena
- 0
P
Printablespdicko
Rack Mount Bracket for Netgear GS308PP 8-Port Network Switch
This is 19" 1U rack mount bracket for a Netgear 8-port Network Switch (GS308PP). It's pretty beefy because it will be in a portable case and need to stand up to a lot of rough handling. I printed this with PLA on a Bambu Labs A1 Mini, so…
- Pobrania
- 111
- Polubienia
- 17
- Ocena
- 5
P
PrintablesgZrQ8yvQHvpw2dd
GS308 Under Shelf Bracket
This bracket can be screwed on the underside of a shelf to hold a network switch. The switch will stand on its feet, and has a gap above to allow cable routing.
- Pobrania
- 111
- Polubienia
- 24
- Ocena
- 3,5
P
PrintablesNick Fajardo
Netgear GS308 Mounting bracket for Leviton SMC
Uses Leviton push pegs to mount in the box, then slide your switch on the pegs. Pegs are 80mm on center, with 6mm posts
- Pobrania
- 108
- Polubienia
- 3
- Ocena
- 0
P
PrintablesQuinton Graham
Netgear gs308 Modular rack mount
Beware this is only the right side of the modular rack model. Make sure you know this before printing. Use supports (organic is better)
- Pobrania
- 107
- Polubienia
- 6
- Ocena
- 0
P
PrintablesBryan Peters
Netgear GS308E Single Piece Mount
An improved mount that prints in one piece and will securely contain a Netgear GS308E switch. Uses set screws. Will continue to add parts and pictures as I build my rack. Print face down with supports enabled. Four m3 screws are required,…
- Pobrania
- 106
- Polubienia
- 15
- Ocena
- 0
P
PrintablesThanatoast
Naked Snake's Codec (MGS3)
Codec for Naked Snake's Cosplay! It has some space in the back for velcro to be glued in and an “audio jack” to plug a cable for the earpiece
- Pobrania
- 103
- Polubienia
- 7
- Ocena
- 0
P
PrintablesChriswak
Netgear GS305P Switch Rackmount Adapter
I prefer to keep my switches off the shelves and add them to a standard 19" server rack instead. I recently picked up this GS305P and adapted a rackmount adapter for it. 1. Non-printed Parts Required (4) Server rack Cage nuts (4) M6 x…
- Pobrania
- 99
- Polubienia
- 10
- Ocena
- 0
P
PrintablesTheAppleFreak
Netgear GS305EP 10" Rack Mount with Keystone Connectors
I'd printed out one of Masiakla's rack mounts to use with a GS308v3 switch, but as I was considering the way I'd use it in my own setup, I realized I wanted to have at least one keystone connector to run a cable through behind the rack.…
- Pobrania
- 94
- Polubienia
- 10
- Ocena
- 0
P
PrintablesJMack
Linksys LGS326 Server Rack Ear
Print Settings: Material: PETG (VoxelPLA Pro eventually failed after 3 years on my similar model) Walls: 3mm+ Top/Bottom: 1mm+ Infill: 40%+ I couldn't find a cheap set of rack ears for my linksys switch so I designed my own. The bolt…
- Pobrania
- 91
- Polubienia
- 12
- Ocena
- 0
P
PrintablesBarrnet
Underdesk mount for the 5 ports switch Netgear GS305
Glue or double-sided tape is needed for sticking it under your desktop . Could be printed in PLA without support. Update : I uploaded a new model with a C clamp for a mount without tape or glue. The clamp have an height of 80mm. If you…
- Pobrania
- 83
- Polubienia
- 14
- Ocena
- 0
P
PrintablesRobert S.
2/3u 10" Rack Netgear Holder (GS308E,GS108E)
If your 10-inch network cabinet is full to bursting with technology, this holder will save you some ⅓ U space. It can be supplemented with 4 M3 inserts on the sides so that you can additionally fix the switch to the side with M3 10mm…
- Pobrania
- 82
- Polubienia
- 8
- Ocena
- 0
P
Printablesmaker-tgin
Netgear GS308 Wall Mount
The model provides a screw-in wall mount bracket for your NETGEAR GS308 switch. Printing details: Supports are required for the bottom lip of the bracket Print at 0.2mm Use PETG for flexibility
- Pobrania
- 80
- Polubienia
- 4
- Ocena
- 0
P
Printablesalex
Rack ear for Netgear GS316 for mounting in 19" rack
Holder to mount NetGear GS316 Switch in 19" rack. Print 2, one for each side. For ekstra security, add a large zip tie to hold the ears to the switch while mounting it to the rack, once it's mounted it should hold it self. print with the…
- Pobrania
- 71
- Polubienia
- 2
- Ocena
- 0
P
Printablesslumpy
NETGEAR GS305P modular 19 inch rack mount
Remixed Maukers great model to accomodate a NETGEAR GS305P switch. Printing in ABS works well if you include an inner and outer brim. Added both versions (left and right). Remove the rubber before insert the switch into the mount.
- Pobrania
- 70
- Polubienia
- 7
- Ocena
- 4
P
Printablesremington
Netgear GS305 Under-shelf mount (remix)
A remix shortening the length to fit a Netgear GS305 5 port switch. I also hacked off the bottom curve to allow it to print with no supports
- Pobrania
- 67
- Polubienia
- 5
- Ocena
- 5
P
PrintablesStefan666
GS308 Switch mount remix , easyprint
On this way it will fit a regular bed :)
- Pobrania
- 59
- Polubienia
- 7
- Ocena
- 5
P
PrintablesheyItsDubbleA
Thinner GS305 Network Switch Mount
All credit goes to Guillaume Gendron who posted this original version. https://www.printables.com/prints/97432-netgear-gs305-switch-under-desk-mount I just lazily clipped out 5mm worth of depth out of the base plate and shortened the…
- Pobrania
- 59
- Polubienia
- 3
- Ocena
- 5
P
PrintablesJeffCurless
10" Rack Mount for Netgear GS305PP
3D Printed 10" Network Rack Mount for Netgear GS305PP As part of my classroom network setup project, I’m building 10" 3D-printed racks for my students. They'll be configuring and testing real-world networks, gaining hands-on experience…
- Pobrania
- 58
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDrenth Engineering
KTM GS350 Parts
I printed the handgrip for the rear fender so the bike can be handled better. The kickstarter boot and the nipple covers I printed in Filaflex shore 82a TPE, which is very soft and stretchy flexble filament. I printed these on my prusa…
- Pobrania
- 58
- Polubienia
- 10
- Ocena
- 0
P
PrintablesRivano
Netgear GS305P desk mount
This model is designed to mount the Netgear GS305P switch under your desk. The switch can be placed in the holder right side up or upside down. The openings in the walls are intended for ventilation. There are 2 countersunk screw holes…
- Pobrania
- 58
- Polubienia
- 4
- Ocena
- 5
P
PrintablesBobosch
Parametrizable FritzBox 6590 7590 and Netgear GS316 MS308 rack mount
Parametrizable 10 inch and 19 inch rack mount for - FritzBox 6590 and 7590 - Netgear GS316 / MS316 and GS308 / MS308 Screw size is parametrizeable, example is with M4 10mm screw Source at Github https://github.com/bobosch/RouterRack
- Pobrania
- 55
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAlexTischer
GS3166EPP Rack Ears - Mounting Brackets with Power Adapter space
Rack mounting brackets for Netgear 16 ports PoE switch GS3166EPP, with a space for the Power Adapter. Use M3 threaded rods and nuts to keep everything together (although they might be unnecessary, since the brackets already click in place…
- Pobrania
- 49
- Polubienia
- 5
- Ocena
- 0
P
PrintablesJonweb
Under desk switch holder for GS305 5 ports Netgear
updated 20221028 I added some configuration based on differrent tickness of shelf, personally I prefer the version without 90°, but i kept it for download (28-90°). The name of files are related to shelf tickness. Regards jonweb Hello I…
- Pobrania
- 49
- Polubienia
- 13
- Ocena
- 0
P
Printablesdvittorio
ESRack - Module - Netgear Switch GS308EP
I really liked the original ESRack system design created by @EvilProphet . I created a module for Netgear Switch GS308EP from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
- Pobrania
- 48
- Polubienia
- 11
- Ocena
- 0
P
PrintablesFortinbra
Rack for Netgear GS308E
This model uses : 10x M3 8mm socket head screws 10x M3 nuts
- Pobrania
- 40
- Polubienia
- 5
- Ocena
- 0
P
PrintablesD!nu
Espresso cup adapter for La Marzocco GS3
A friend noticed that on his espresso machine would be good to have the option to put the small espresso cups higher up, closer to the funnel. La Marzocco does not provide such an adapter, so I made one. I printed it in PETG, but probably…
- Pobrania
- 40
- Polubienia
- 5
- Ocena
- 5
P
Printablesfaultedlogic
Switch Bracket for Netgear GS308
This is an under desk mount for the Netgear GS308 8 port gigabit switch. Print two of this model, one for the left side, one for the right. Each bracket fastens with two 1/8" wood screws. It prints well on it's side, as modeled without…
- Pobrania
- 39
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDDDavid
Shelf for Netgear GS308
The switch sit inside and can't move. The external dimension of the switch is 158 x 101 x 29 mm You only need 3 smalls screws. No support needed for the print. Yay !!
- Pobrania
- 35
- Polubienia
- 6
- Ocena
- 5
P
PrintablesAndrew
CONAIR Handheld Fabric Steamer Model GS36 Holster
Made this for my wife.
- Pobrania
- 30
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMisiek
Top AOC cq27g4x Monitor Mount for Creative Sound Blaster GS3
Custom speaker mount designed to attach the Creative Sound Blaster GS3 to the monitor arm of the AOC CQ27G4X . The mount allows the speaker to be slid into place and securely mounted on top of the monitor , using the existing monitor arm…
- Pobrania
- 22
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAdam Skřivánek
Creative Sound Blaster GS3 Riser
15mm Soundbar Riser Designed to lift the speaker by 1.5cm for better sound alignment and cable clearance.
- Pobrania
- 22
- Polubienia
- 3
- Ocena
- 5
P
PrintablesPrintin'Monkey
Netgear 8-Port Switch (GS308) wall mount
I rewired my wired network and needed to mount the newly installed network switch in an entertainment panel. There are two versions of the holder but they're 99% the same. The one for the panel mount has bumps in the back to match the…
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPampalone
Vertical Base for Netgear GS308E Switch
This is a very simple vertical base for the Netgear GS308E Switch. Since I'm fixing my home network infrastructure. I thought about placing the switch vertically, but not having much support, I created this base to keep it vertically. I…
- Pobrania
- 15
- Polubienia
- 4
- Ocena
- 0
P
Printablesaaron barragan
2006 LEXUS GS300/350/450H e.t.c. CENTER DASH VENT A/C FRONT OEM BRACKET
2006 TO 2011 LEXUS GS300 GS350 GS450H GS460 CENTER DASH VENT A/C FRONT OEM BRACKET, I broke mine so I made a replacement and I think it might be useful to someone else since you can only buy it complete and it's not necessary, Once…
- Pobrania
- 15
- Polubienia
- 5
- Ocena
- 0
P
PrintablesWBW602
LINKSYS LGS308MP 19inch Rack Mount
this is a relatively simple model, print facedown with minimal supports. attaches to one side of the rack with plenty strength. unsure if it'll fit a 10inch rack.
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMatcomaker77
TurboLamik Rotary witch mount for GS300/Toyota Aristo JZS161
Turbo lamik rotary switch mount for lexs gs300/toyota aristo. Should fit in place of the transmission ECT switch or VSC switch
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesGeoJdk
Black Shark GS3 Ultra smart watch charging station
Charging station or fixture for my new smart watch. Has a slot for the magnetic charger plug and grab the watch in correct location while charging. Print instruction: Material: PLA or whatever you have. Support: Not required. Else do as…
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMoonwake Coffee Roasters
La Marzocco GS3 Pump Motor Cooling Fan
During high volume commercial usage, the pump motor on La Marzocco's GS3 could overheat and stop functioning until it cools. This is due the proximity of the pump to the large steam boiler and lack of cooling. The models uploaded here is…
- Pobrania
- 8
- Polubienia
- 2
- Ocena
- 0
P
PrintablesLennart
Modular 1U / 1HE Rack mount for Netgear GS308EPP and Raspberry Pi CM4
I remixed two models to fit to my purpose. I needed a rack mount for my Netgear GS308EPP and my Raspberry Pi CM4. Therefore I adapted the left rack mount base with some different spacings to fit the GS308EPP (75mm spacing) little loose…
- Pobrania
- 7
- Polubienia
- 2
- Ocena
- 0
P
PrintablesNoodles
Minimal Vertical IKEA Skadis Mount for Netgear GS308E (v4) Switch - Left- & Right-Facing Options
Minimal Vertical IKEA Skadis Mount for Netgear GS308E (v4) Switch Most mounting solutions for the Netgear GS308Ev4 I found were either incompatible with Skadis, in the wrong orientation, or required a lot of time and material to print. So…
- Pobrania
- 6
- Polubienia
- 1
- Ocena
- 0
P
Printablesda_owa
Netgear GS305 Switch Mount for Hager volta Mounting Plate
Bracket to mount a Netgear GS305 (5-port gigabit, metal housing) in a Hager volta multimedia enclosure on a mounting plate. Ports face up, the switch stays open on all sides for cooling. How it works The switch hangs on two printed hooks…
- Pobrania
- 4
- Polubienia
- 2
- Ocena
- 5
P
Printablesda_owa
Netgear GS308 Switch Mount for Hager volta Mounting Plate
Bracket to mount a Netgear GS308E (v4, metal housing 158 × 101 × 29 mm) in a Hager volta multimedia enclosure. Ports face up, the switch stays open on all sides for cooling. Same design as my GS305v3 mount, scaled for the 8-port housing.…
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
P
Printables
Rack ear for Netgear GS316 for mounting in 19" rack
Holder to mount NetGear GS316 Switch in 19" rack. Print 2, one for each side. For ekstra security, add a large zip tie to hold the ears to the switch while mounting it to the rack, once it's mounted it should hold it self. print with the…
P
Printables
MGS3 Naked Snake / Big Boss Throat Microphone Halloween Costume Piece
Big Boss/Naked Snake's Throat Mic from Metal Gear Solid 3. Add some fabric to the front portion and tape some string to it to make it look like the in game object, but this is the extent of 3D printed material possible. Fits an 18" neck…
P
Printables
Netgear GS305EP 10" Rack Mount with Keystone Connectors
I'd printed out one of Masiakla's rack mounts to use with a GS308v3 switch, but as I was considering the way I'd use it in my own setup, I realized I wanted to have at least one keystone connector to run a cable through behind the rack.…
P
Printables
Modular 1U / 1HE Rack mount for Netgear GS308EPP and Raspberry Pi CM4
I remixed two models to fit to my purpose. I needed a rack mount for my Netgear GS308EPP and my Raspberry Pi CM4. Therefore I adapted the left rack mount base with some different spacings to fit the GS308EPP (75mm spacing) little loose…
P
Printables
Creative Sound Blaster GS3 Riser
15mm Soundbar Riser Designed to lift the speaker by 1.5cm for better sound alignment and cable clearance.
P
Printables
Netgear 8-Port Switch (GS308) wall mount
I rewired my wired network and needed to mount the newly installed network switch in an entertainment panel. There are two versions of the holder but they're 99% the same. The one for the panel mount has bumps in the back to match the…
P
Printables
NetGear GS308E 10" Mini Rack
Here is a print that will fit diagonally on a Creality K1c. I printed it in PETG This design will mount an 8 port Netgear switch in a 10" mini rack for my raspberry Pi's. There are ventilation holes which also aid in reducing the amount…
P
Printables
Black Shark GS3 Ultra smart watch charging station
Charging station or fixture for my new smart watch. Has a slot for the magnetic charger plug and grab the watch in correct location while charging. Print instruction: Material: PLA or whatever you have. Support: Not required. Else do as…
P
Printables
Adapter for linksys LGS310C on Rack 19" 1U
It consists of two parts: the adapter for the switch and a 20 cm extension connected by an M5 screw and thread to complement the 19" of the rack.
P
Printables
Linksys LGS326 / LGS3XX Wallmounnt
Just a simple wallmounting solution for a Rackmount style Linksys switch Print settings 0.25 layer hight 4 Preminter lines 20% Infill Cubic Fillament Spectrum Deep Black PETG @245 Nozzle temp and 90 deg bed
P
Printables
10" rack mount for Netgear GS305E switch (1U)
This mount holds the Netgear GS305E switch in a 10" rack. You have to slightly force the switch into the mount. This is deliberate for the switch to stay in place even when yanking the cables. The switch is mounted assymetrically, I've…
P
Printables
Netgear GS308EP 10 Inch Rackmount Modified Faceplate
The original file works/fits great but I wanted the face plates to match the Dell OptiPlex file from @TimPrints_686384
P
Printables
NETGEAR GS305 LED Cover
Annoyed by the blinking LEDs of the NETGEAR GS305 network switch (when its blinking and you want to sleep)? Stop it with this part covering all LEDs on the front of the switch. Don't worry you're still able to read everything on the front…
P
Printables
10" Rack Mount 1U | Netgear GS308EPP
If you like the model, I would appreciate if you leave a ❤ like. Rack Mount Bracket for Netgear GS308EPP This bracket is designed specifically for the Netgear GS308EPP switch, offering a clean and secure fit in your 10-inch rack setup.…
P
Printables
10" Rack Mount 1U | Netgear GS305P
If you like the model, I would appreciate if you leave a ❤ like. Rack Mount Bracket for Netgear GS305P This bracket is designed specifically for the Netgear GS305P switch, offering a clean and secure fit in your 10-inch rack setup.…
P
Printables
Netgear GS308EP 10 Inch Rack Mount 1U
This 3D-printed rack mount bracket is designed specifically for the Netgear GS308EP switch, making it easy to install in a 10-inch rack (1U height) . Features: Perfect Fit – Tailored for the GS308EP, with accurate port and mounting…
P
Printables
MGS3 Naked Snake / Big Boss Throat Microphone Halloween Costume Piece
Big Boss/Naked Snake's Throat Mic from Metal Gear Solid 3. Add some fabric to the front portion and tape some string to it to make it look like the in game object, but this is the extent of 3D printed material possible. Fits an 18" neck…
P
Printables
HSW Mount for Netgear GS305E
Holes are spaced 46mm apart, and are 3mm to work with either button-head bolts or actual screws. I used M3 screws for mine, though the head only barely fits.
P
Printables
IKEA Skadis Netgear GS305P Mount
Use to mount a Netgear GS305P switch to an IKEA Skadis board. The switch's dimensions are 160mm x 101.5mm x 29.6mm including the feet. Probaly best to print in something stronger than PLA. I did mine in PETG.
P
Printables
Netgear GS305 Magnetic Holder
A mount for the Netgear GS205 switch with 4 integrated magnets to attach to a steel surface. Uses 40 x 10 x 5 mm magnets like these: https://www.amazon.com/dp/B0CB89N8G1?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 If you print on its side and…
P
Printables
Creative GS3 Desk Clearance Mounts
Creative GS3 Desk Clearance Mounts Elevate your audio experience and reclaim your desk space with these custom-designed risers for the Creative GS3 Soundbar . These mounts lift the soundbar at a slight angle, improving sound projection…
P
Printables
GS308 Shelf
Made a shelf to hold my Netgear GS308 switch. It also holds my Netgear Mesh node, however, even though it's sized for it, when cables are connected it must hang off the front slightly. Reinforced the bottom of the shelves and holes to…
P
Printables
Lanyard compatible with Mazda Gas Cap GS3L-42-25OB
Lanyard compatible with Mazda Gas Cap GS3L-42-250B. Fits well on a Late 2000s Mazda CX-9 Stock Gas Cap. Reuse the stock plastic screw. Printed in Ninjatek Cheetah Orange TPU
P
Printables
Netgear GS305e Under-desk Mounting Bracket
For mounting Netgear GS305e Ethernet Switch under desk.
P
Printables
Minimalistic netgear gs305v3 mount
Used this mount to attach my switch with a tesa stripe under my table. Because the mount is so minimalistic it only works with good filament and good printer settings. happy printing!
P
Printables
Support switch Netgear GS305PP / GS305PP Switch holder
Support pour switch Netgear GS305PP en deux parties. A imprimer à la verticale sans support. J'ai simplement collé les deux morceaux avec de la super glue. J'ai également inclue le modèle complet, mais il faudra nécessairement des…
P
Printables
Netgear GS308 8 port switch module - wings - REMIX (M3 screws)
UPDATE 8/17/2026: I'm working on a more universal switch mount for these relay rack mounts. The idea is to have one mount that works for various switches that have a similar profile (160mm wide and approx 26.3mm tall). That would include…
P
Printables
Modular 1U Relay Rack Mount for TP-Link TL-SG108 or Netgear GS308 8 port switches (with STEP file)
UPDATE 8/17/2026: I'm working on a more universal switch mount for these relay rack mounts. The idea is to have one mount that works for various switches that have a similar profile (160mm wide and approx 26.3mm tall). That would include…
