Liczymy pasujące modele…
These wheel chocks will stop your Hot Wheels / Matchbox 1:64 cars from rolling around on unlevel surfaces. They work on the front wheels, back wheels or both. Very quick print! HW Chocks-ChockA is easier to print and comes off the build…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
3 different hooks and rings for sliding into caravan slider. For clothesline towels and other atachment.
Stop your cars from moving on uneven surfaces with these 3D printed chocks. Available in 3 versions: 25mm – suitable for 1:64 scale model 30mm – generic version for Hot Wheels cars 40mm – for Team Transport trucks
This shock is designed to be fully 3d Printed. All pieces minus the two TPU Gaskets and spring are meant to be printed from PLA. The Spring is designed to be printed from PETG. This print does require a good and finely tuned 3D Printed as…
If you want to use Losi Mini-T springs on your Traxxas TRX4 shocks, these spring perches will allow you to make the conversion. The lower perch is designed to allow popping it off over the shock shaft without removing the rod end, so…
Got a returned/broken RC car from a bin store. This is an MJX 1:16 scale Hyper Go buggy. The shocks tower (connects front shocks to frame) was broken. I printed a crude one from a not-to-be-mentioned printable model website, but wanted to…
These are volumne spacers fiting for the Fox Float X (and other) shocks. It's fitting tight onto the shaft, but it's working ;-) I attached also the Fusion File so you can modify it for your needs. The both models are the copied 0.4in³…
These wheel chocks will stop your Hot Wheels 1:43 cars from rolling around on unlevel surfaces. They work on the front wheels, back wheels or both. Very quick print! HW Chocks-ChockA_43 is easier to print and comes off the build plate…
If you want to use Losi Mini-T springs on your Traxxas big bore shocks, for example p/n 2660, these spring perches will allow you to make the conversion (commonly used on 1/10 scale rock crawlers). This spring perch is designed to allow…
This is for the 1/2" size DU Bushing for Fox and most other brands of rear shock Originally I ordered a new DU Bushing (rear shock eyelet bushing) and the bushing tool for my mountain bike. The bushing showed up; but the tool never…
This is a chock for the casters/wheels of a Steelcase Leap office chair. V1 was a chock that allowed the wheel's weight to rest on the floor. Without the weight on the chock itself, the friction between the chock and the floor wasn't…
This is useful if you have an office chair with casters and you want it to stop rolling around for some use or other, and also don't want to swap the casters only temporarily. You can stand a few of the casters on the blocks so that it…
Very simple and basic design (lacking details) of wheel chocks for Bruder 2750 MAN Breakdown-Truck. They serve to stop the car from falling down from the breakdown truck.
Nikko F10 Rear Shock bodies. Fit Rhino, Bison, Super Lobo II, etc. If you are missing springs, they are about 60mm Long 14 mm ID 16mm OD. You can find replacement springs this size. Look for other 1/10 shocks. Tamiya Blitzer Beetle rear…
While FPV driving, I randomly run into things. So I thought designing a bumper might be a good idea… Printing Bumper & shocks saver: PETG. Use modifier object for more infill where needed to increase strength. Bumper front part: TPU for…
LDRC Shock Preload Spacers - Fits WLToys Shocks I made these for my LDRC 1899 RC and fit like a glove. 5mm Diameter. Will also fit WLtoys K989 and K969 RC's. Print 100% infill, no supports required. Enjoy!
Working on my latest RC build, I realized off-the-shelf suspension shocks were surprisingly affordable. To bridge that gap, I designed these 3D printable adapters for them. Required Products WPL C14 C24 Shock Absorber 4x M2.5x12mm Screws…
Here is a link to the shocks that this spring perch was designed to fit: https://www.amazon.com/gp/product/B08GLYH98X/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
We wanted a set of customised wheel chocks for our 4 seat Sling Tsi, so I designed a set. These were printed on a Creality K2Pro with Hyper PTEG. I have uploaded the STL file with no text as well as a .3mf file to make it easier for…
These wheel chocks will stop your 1:24 cars from rolling around on unlevel surfaces. They work on the front wheels, back wheels or both. Very quick print! The design does not requires a brim or supports. The .gcode is included to make it…
Reduce the hanger rash to your RC Planes that can happen during transport. Easy to print Wheel Chocks that can be scaled for your model. These were printed with Overture Matte PLA with 2 wall and 20% in-fill. Brick Red PLA:…
rc car shocks mounts
Update 11.03.2026 - fixed Right part of the chassis and the rear left arm - there were some incosistancies in between the left and right arms: Update to RUDE - 09.2025 I had some of the non-printed components available in my storage so…
I travel a lot with my SCX6 in the trunk; it moved around a lot on its tray. Adding these kept it in place. You'll need to print two per wheel; you'll also need some ¼in rope/para-cord to connect them. I found it best to put the chocks…
Little helper to remove the bushings from FOX rear shocks. Print Settings Printer: Ender 3V2 Rafts: Doesn't Matter Supports: No Resolution: 0,2 Infill: 35 Filament: RedLine PLA/PETG Category: Sport & Outdoors
Simple puzzle piece like wheel chocks for your Pinewood Derby.
For gamers without carpet who want to push rudder pedals without their chair sliding away, place one of these under your office chair's wheels. Fits a GTRacing chair--likely others. I used PLA. No supports needed. Post-print: Add a piece…
Lawn bowls or indoor bowls wedges. Work perfect Printed in PETG with large brim so edges dont curl up.
RC Shock Building Stand for 13MM Off Road Shocks, based off The Hudy Shock stand and Remixed from: KayJayFE on Thingiverse however I Moved and lengthened the standoff legs as well as created recesses so they can just push in without need…
I could not remove ball joints from my shocks so I've remade @GetItPrint3d brackets. Also the rear one was not fitting great with the base, so I fixed that. This version also need heatset inserts for the screw. For this to work you will…
I made this model as Extra security for my Lego vehicles on a shelf. Printed on Bambu X1. Its a simple print shouldn't have to do anything crazy. I used 3 Walls and 15% infill.
A friend of mine was looking for a new “Schocken” Set, but i couldn't find one with the right measurements in the web. So i took his old one andmade one with freeCAD. I made the stand in 3 parts, because i was not able to print it in one…
Ordered a new DU Bushing (Rear Shock Eyelet Bushing); plus a DU Bushing Tool for my for my mountain bike. The bushing showed up, but the tool never did...... So I decided to try a 3D printed one; which worked surprisingly well. Use a 4mm…
Rear Shocks for Radioshack Golden Arrow, Sagitta I made these for my Radio Shack Sagitta, but I think they fit Golden Arrow and maybe other Nikko buggies. These are the rear shocks with the offset angle with the longer shock mounts on the…
A set of chocks with the correct scale and height, as the wheel pants of the WACO are rather low. Additionally, the font and back chocks are joined which ensures that they will not shift if e.g. the plane is bumped.
Replacement for Fox crush washer. Easy to lose when swapping shocks. Print PETG, 100% infill. 0.2mm layer height or less. Smaller nozzle is better to get the details, 0.4mm works fine. The reference picture is printed with 0.6 nozzle at…
Two variants of wheel chocks for a 1:38 scale model car. The first variant is a single chock for if your scale model has a different distance between wheels than mine. The second variant is two chocks, paired together for easy…
After a 35 mph wind blew my Pit Boss pellet smoker over (luckily no damage) i wanted to make something to keep it from sliding around. This is made for wheels that are 100 mm in diameter.
Used these Shock towers to fit 90mm shocks to a Tamiya TL-01 chassis. Together with a reduction gearbox (I will upload this later) you can fit bigger wheels to get some kind of TL-01 crawler. There are also mounting points for Carson…
it was my nephew's favourite so I re-created it.
1/5 scale monster truck shocks
It goes on the rebound/compresion knobs and can be torned with a 8mm hex key
22nd iteration :) - You will need a strong but flexible material. I'm printing exclusively in Taulman 910 just for these and I have this tower mounted to 2 cars which have each taken some serious abuse. Designed to flex a great deal, but…
I tried to refill the shocks for my MJX Hyper Go 16208, but 70 wt silicone oil was still too thin for them. so i printed the shock pistons to be able to remake the holes or just control the dampening from the diameter of the piston. The…
I made these to keep my Anker Everfrost cooler found sliding around in the trunk of our RAV4. We have the added benefit of having made a storage box for the chocks to be bolted to.
If you found my things useful, you can buy me a cup of coffee: http://paypal.me/marcuss24 Update - 15.05.2020 Added smaller version of front and rear shock towers for 100mm oil shocks. The original Shock Towers are for 110mm oil shocks.…
aqui dejo un practico estuche donde podremos repasar nuestro amortiguadores y diferencial organizado con pequeña bandeja para no perde un tornillo por la mesa es practico y cierre con juego de imanes.. de Neodimio, Imán Pequeño Redondo 6…
Remix of https://www.printables.com/model/166887-volume-spacer-for-fox-float-shocks for my 2026 Fox Trunnion
stand to hold all your tools and shocks that are being built or have to be built
Chocks to prevent propane tanks from rolling around / falling over in trunk when going to get refills. Print Settings Printer: 3KU K3000 Rafts: No **Supports:** No Resolution: .400 mm **Infill:** 10% Category: Other
Corner chocks for keeping a TAS in place Easy to lift out if you don't want to screw down the TAS You'll need 4 of them (obviously) if you like this model then please donate to the Sanjay Mortimer foundation…
I built a few Kyosho legendary series kit, and one step is always difficult. Last time, I did not thought about this, but it's always hard to put the shock gaskets in place, and sometimes you break one. This is my own attempt to solve the…
Just a little remix to give the Bebop a little shock absorption upon landing. There are right and left versions. Also should fit without removing the rubber plugs but I took them out anyway. UPDATE Made the legs a bit thicker as my first…
These are Spring Free No Supports K'nex Suspension/Shocks. Good for use in k'nex vehicles. there are 2 versions, one with more articulation and one with less articulation. Only takes 14 minutes to print!
Using Traxxas Big Bore shock with Losi mini t springs is a common mod to getting a good shock for crawling. Losi mini t springs are hard to find lately (at least where I live) but Desert Lizard springs are common but they do not fit as…
Quick print for an adjustment knob for Manitou Skareb Elite MTB Shocks (circa 2003). Mine broke after many years of service. If anyone else still uses these and also needs to replace the knob, this print may be of use. PETG is fine for my…
Just a little remix to give the Bebop a little shock absorption upon landing. There are right and left versions. Also should fit without removing the rubber plugs but I took them out anyway. UPDATE Made the legs a bit thicker as my first…
As the piston on my shock absorbers was broken and I didn't want to order online because of a component costing a few cents, I designed the piston. Printed in PLA, diameter 10.89mm. The installation is done simply by replacing the old…
Simple, easy-to-print chocks designed to securely hold a 5-lb aluminum CO2 tank in place. Keeps your cylinder from rolling during transport. Print two Suggest 3 perimiters and at least 15% infill No supports needed
Simple PETG chocks for 410mm external diameter wheel + tyres, for use on un-braked trailers Prints on side without support. 30% in-fill. Threads with 12mm nylon cord. Those pictured had the reg number recessed. STL's and BGcode are…
Shocks upgrade, or replacement PISTON for oil filled rc car shocks. V1: csa 7mm x 2mm, shaft hole 2mm, went holes 1.5mm x4 V2: csa 7mm x 2.5mm, shaft hole 3mm, went holes 1mm x4
Here is a set of wheel chocks for the Spartan SR trailer. The model includes the coloring to mimic the actual Spartan SR logo.
It's a pretty obvious one this, doesn't need low layer heights, works well in PLA. I used 30% infill on mine and glued cork sheeting to the underside. I made 5, but I only really need to use 2 on my chair. The chock is designed for 50mm…
These allow you to semi-securely transport your T'au Devilfish pattern vehicles without needing to modify the models. The small piece secures the front landing gear and the rear piece holds both rear landing gear. You will need 5 -- 5x2mm…
print in 0.15 100% full filled in pla abs or petg add 0.5mm shim and 20mm m3 hex screw for rear arm
My dad drives an old Blue Bird RV camper and wears Shocks bone conduction headphones while driving. But he needed a spot to store them when not wearing them and wanted it to attach to his phone. His design had his nickname and the Blue…
Created for shock testing for the MSU SAE BAJA Racing team Single slide-on model and two-piece clam shell model (two piece is more complete) for measuring the travel Model for String Potentiometer SP1-12…
These wheel chocks will stop your Mini-Z cars from rolling around on unlevel surfaces. They work on the front wheels, back wheels or both. Very quick print! Fits wide and narrow wheel offsets. The design does not requires a brim or…
Light duty wheel chocks with recess for magnets. Step file included Please leave me a “Like” Thank you for downloading
🏎LDRC 1/18 Drift Chocks!🏎 Any Drift Car For 1/18 Scale
These sleeves can be used to modify Bilstein rear shocks for a Volvo 760 (p/n: FA-B46-0296-H2 or 24-002967) to fit the VW pickup rear axle. Bilstein never made a specific shock for the rear of the VW pickup, but they do make some strut…
Lost one of my Spring retainers and couldn't find a fitting model online so designed my own
Print in TPU for bomb-proof usage. Use two zip-ties to secure to the stem. No supports needed.
Chocks to prevent propane tanks from rolling around / falling over in trunk when going to get refills. Print Settings Printer: 3KU K3000 Rafts: No **Supports:** No Resolution: .400 mm **Infill:** 10% Category: Other
Update 11.03.2026 - fixed Right part of the chassis and the rear left arm - there were some incosistancies in between the left and right arms: Update to RUDE - 09.2025 I had some of the non-printed components available in my storage so…
Working on my latest RC build, I realized off-the-shelf suspension shocks were surprisingly affordable. To bridge that gap, I designed these 3D printable adapters for them. Required Products WPL C14 C24 Shock Absorber 4x M2.5x12mm Screws…
We wanted a set of customised wheel chocks for our 4 seat Sling Tsi, so I designed a set. These were printed on a Creality K2Pro with Hyper PTEG. I have uploaded the STL file with no text as well as a .3mf file to make it easier for…
Remix of https://www.printables.com/model/166887-volume-spacer-for-fox-float-shocks for my 2026 Fox Trunnion
These designs are lego suspension with higher articulation. each file has different connectors in different orientations.
My brother asked if I could print him a set of wheel chocks for his RC Plane so that it would not bump around in his car while be transported. The smaller set are for my PKZone Extra300 and the larger are for his PKZone warbird and my…
bike fender mount for jetson bolt pro using mtb shocks
