72 modeli
Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…
Wydruk około 3,98 €–4,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Einfacher Kantenschutz für die navimow i Serie. Sie sind straff entworfen, so dass ein Aufstecken genügt. Es ist kein Schrauben oder Kleben erforderlich. Ich habe mit PETG gedruckt / 100% Infill
Simple 90 degree angle mount for the Segway Navimow i105e/i108e antenna. Designed to be printet without supports. Really sturdy with these print settings: 0,2mm layer height 3 walls 5 top and bottom layers 25% grid or gyroid infill If you…
This is a remix from @massis to mount the Navimow's GPS receiver with a 90° angle.
Enhance your robot lawn mower’s terrain capabilities with this wheel. Designed to fit both the Stihl RMI 422 and 632 models, it allows you to use the original wheel cap for a seamless upgrade. See the below video for installation…
Eine Wandhalterung um das Netzteil sicher aufzubewahren und zu schützen. Das Segway-Netzteil / Trafo Halterung passt zu folgenden EU-Mährobotern: Navimow H500E Navimow H800E Navimow H1500E Navimow H3000E / H3000E VF Navimow i105e Navimow…
Simple 90° angle mount for the Segway Navimow. I chose a design that is easy to print. I used PCTG for temperature resistance. 25% cubick infill 5 top and bottom layers 4 perimeters
Vielen Dank an die Ersteller der Modellvorlagen, die Maße passten bei mir perfekt! https://www.printables.com/de/model/920133-segway-navimow-i105e-messerteller-fur-6-klingen-un…
Upgraded Wheel and Tread system for the Segway Navimow i Series! When I first got the Navimow I was so disappointed I was planning on returning it. It couldn't navigate the grass at all. It would get stuck left and right. I turned to…
Glue the cap on. print solid or with 40+ infill.
The Segway Navimow robot mower has a compartment that is intended for their Navimow Access+ 4G Module cellular theft-tracking tracking accessory that is $150 USD and that doesn't even include the cellular fee you have to pay after the…
Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…
Mount for a Segway Navimow GPS antenna, made to fit on a standard 90mm wood beam as I wanted to mount mine up on top of our pergola in the backyard.
Prints flat without any supports . You can use it to lay down the perimeter wire for your automatic lawn mower. You can also use it to lay down any cable you want this way. I used it for a 12V wiring for my garden lights. The grass will…
Messerteller ist 220mm groß mit Messerklingen 254mm Schnittbreite mehr geht nicht. Messerschutz wurde auch erneuert und für den größeren Messerteller vergrößert. Mähgeräusche etwas lauter. Mähtest laufen noch. Was benötigt wird…
Replaces the OEM "skirt" and adds extra bumper width on the right side to avoid getting stock around sharp corners. Scanned the shape with a “Revopoint Miraco PRO 3d” Scanner for optimal fitment.
vycentrované použité závitové vložky do plastu M4 , šrouby původní ( v originálním balení jako náhradní s bříty 9 + 9 ks ) použil jsem ASA , určitě by vydržel i z PETG bílá barva na unašeči není vada tisku ani materiálu :-)
A replacement for a paper ruler that fell apart after a few uses.
After reading about blade disc tuning, I've decided to try my own version. The idea was to use the original disc and have a minimalistic, lightweight design. It worked flawlessly last season on my H800E. Printed with PETG, 100% infill.…
Um den Abstand zwischen Scheibe und Klinge wie beim orig. nachtzustellen, empfehle ich noch zusätzlich eine 4mm Scheibe beizulegen. Damit drückt sich auch der Schraubenansatz nicht in den Kunststoff ein. Verwendet werden normale M4…
Tested with Navimow i series i105e Additional things 8x threaded inserts (M4×8,1×6mm) 8x blades Tested with ASA at 15% Infill The noise increases slightly after installation NOTE: Use at your own risk!
This holder allows you to mount the Navimow GPS RTK antenna to a location where a longermounting distance is necessary. The pipe is 20 cm long.
A custom-designed adapter ring. This modification allows you to mount 6 blades instead of the standard 3. Materials Needed: 3 x M4 x 8mm screws 6 x M4 x 6mm x 6mm inserts Printing Specifications: Material: PETG Infill: 100% Layer Height:…
Moin, original sind nur 3 Klingen an der Messerscheibe, war mir zu wenig für ein gleichmäßiges Schnittbild. Da es fast nur platte Scheiben ohne Design und mit Einpressgewinde online gibt, habe ich mir ein eigenes Modell erstellt. Warum 7…
Einfach zu druckender AirTag-Halter passend für RIMOWA Koffer. Der Clip passt exakt unter die Führungsschiene des Teleskopgriffs, welche sich hinter dem Reisverschluss eines jeden RIMOWA Koffer verbirgt. Easy to print AirTag holder…
This is a wall mount for navimow GPS. You need the upper portion of the original pole. Of course you can use it for any other pole with 25mm diameter. Additional you need 2 M5x35 screws and M5 nuts. This mount is in 2 parts so you have…
This model is to fix a broken tube of the Rimowa Flex Divider. It consists of two parts, a insert and outer shell to properly stabilize the tube. The insert has a 5mm diameter, the outer shell has a 8.5mm hole. Make sure to match your…
Die Halterung eignet sich perfekt zur Montage der Segway Navimow Antenne an einer Wand. --- The bracket is perfect for mounting the Segway Navimow antenna on a wall.
Modulare Wandhalterung Für Segway Navimow i Serie. Länge des Auslegers kann man selber bestimmen hab es so Konstruiert das eine Garderobenstange benutzt wird. Länge frei wählbar. 17.06.2024 Update habe noch mal einen Adapter konstruiert…
This is a simple garage for the Segway navimow robot lawnmower. The construction is based on 25mm (1") diameter water pipes and 4-5mm thick polycarbonate multiwall sheet. You will also need about 16 M4*35 screws, ideally with a decorative…
I wanted a simple holder for an AirTag in my Navimow i105, as I didn't really need the Access+ module for anything else than tracking. The model doesn't need a lot of infill etc, as it is not structural. Just throw in an activated AirTag,…
I needed to leave my buried navimow cables and antenna pole out in the winter, but I wanted to protect them. Annoyingly the navimow package doesn't include caps for the cables and they have some weird custom M13x1mm threads. I hope this…
Designed for the Viking/Stihl iMow 632 robotic lawn mower. Fits both new and old version of the wheels, should also fit the terrain wheels. Prints in two parts for easy printing on FDM printer, the registration holes are 2.6mm, cue tips…
Please like model, if you are satisfied. Antenna mount to roof for Segway Navimow. Height 54mm.
The Segway Navimow has impressive navigation capabilities and even offers manual control via the mobile app over a Bluetooth connection. However, like most robotic mowers, it tends to leave a fairly wide strip of uncut grass along the…
zakladna 100x100x107 tisk je z ASA vrstva 0.20 Vytvořen gcode pro MK4 stl soubor vsechny tiskarny
Replaced the fillet with a chamfer for better printability
This robust, 3D-printable storage box is designed specifically for STIHL iMOW users. The lid features a raised iMOW graphic and STIHL lettering, making it instantly recognizable and a perfect match for your robotic mower setup. The box…
These custom-designed traction wheels are made for the iMOW robotic lawn mower. They offer improved grip on uneven or slippery terrain compared to the original wheels, making your robot mower more efficient in challenging conditions.…
A couple of Gridfinity bins to hold a “year's worth” of extra Segway Navimow blades and screws. The blade bin stores the blades in a way that keeps the sharp sides safely stowed, but still easy to pick out when needed. Print with your…
Mount for an Navimow X3 GNSS antenna. Dimension: 119 x 80 x 70 mm printed in ABS with 15% infill and 3 perimeters works well Category: Outdoor & Garden
Cutting disc blade for Segway Navimow X series. Consist of two parts for easier printing without support. You will need 12 M4x20 hex screws and 18 M4 nuts. You can use original segway blades. When printed, holes for blades will be blocked…
Wem die LED zu auffällig ist, kann diese Blende anwenden. Ich würde mich über ein Foto dieses Objekts freuen.
Blade disc for Segway Navimow H1500E that has 6 blades instead of the original 3.
Winter cover for the lower bar of the GPS-mount bar of the i-Series Navimow, printed in PETG.
This is a "stronger" and "taller" version of an RTK mount. The original was a good base, but he antenna was still below the roof line. This brings it up higher and is extremely strong. The weakest point is probably the two screws that…
Segway Navimow X3 Series Antenna Mount Mount to a wall, roof peak, or under a gutter. Length: 230mm Width: 90mm Height: 80mm Simple printing, no supports needed. I recommend printing with PETG; 5 layers; 45% gyro.
The original wheels get bad after some years and the robot does not drive good. The new wheels have much better grip and can easily be replaced. No support structure necessary. But you need some longer screws M6 to fix on the mower.
Designed specifically for the Navimow i110N, this custom container offers an alternative to the official GPS tracking accessory. It securely holds a Samsung Galaxy SmartTag2, providing an affordable and effective tracking solution. The…
The original Rimowa steel loops that hold the compression strap for the dividers down didn't last very long. This is my attempt to make them sturdier. Printed in PETG with 5x (walls, top & bottom), 50% infill
Quick remix of macht_rebels airtag holder for Rimowa luggages adjusted for Samsungs SmartTag+. The holder simply clips between the suitcase back and telescope handle. Printed in TPU for better fitment and surface adhesion, should also not…
This adapter will allow you to mount the Segway Navimow (i110 at least) RTK to chainlink fence posts. This may allow other "poles" that are about 1" (25.4mm) thick to attach to chain-link posts. There is a extra little "hole" on the side…
I was traveling this year and used my suitcase so much that all eight wheels came apart. I got replacement wheels with ball bearings, but the pins had different diameters. After many years of usage, the original pin became loose in the…
This is a remixed mower blade disc for the Navimow i-series, reworked specifically for light-weighting and to prevent warping when printed in high-temperature engineering filaments. I originally had a really hard time printing the flat…
A sturdy wall-mounting arm for the Segway Navimow RTK antenna, designed to fit the Navimow X-Series (X450, etc.). Helps mount the antenna to a shed, wall, or fascia board to get better satellite signal. Built-in Cable Routing: Features a…
I want to attach the RDK antenna of my Navimow i105 at the wall of the house. Because of the roof I need 50 cm of distance. I decided to take a satellite antenna mount as easiest solution. To attach the GPS antenna I replaced the end cap…
This is a fence mounting clip for the GPS RTK Antenna for the Navimow i-Series. You'll additionally need 2 M3 Screws, Nuts and (optionally) Washers, or 2 Zip-ties. The model should print fine without supports if you print it as-is with…
An meinem alten RIMOWA Cabin Trolley Silver Integral ist der Tragegriff gebrochen. Ich habe das Griffstück als reines TPU-Teil entworfen (ohne innere Metallfeder wie im Original). Passt mit ein bisschen Nachbearbeitung an den Enden. Da…
These ground spikes are made to mark the location of your Navimow mower base when you pull the station for winter storage. Push them into the anchor points before removing the base, and you have a simple reference for putting everything…
Imow ruler Pour robot Stihl RMi422. Permet de poser le fil a 28cm du bord du terrain en longeant une bordure pavée
This is a baseplate to mount the Segway Navimow X4 (X430, X450) "EFLS" (RTK GNSS/GPS) antenna base station pole/mast to a horizontal surface (with second design for a surface with a 5º tilt ). A machine bolt/screw is used affix the pole…
This is a pair of models to mount the Segway Navimow X4 (X430, X450) "EFLS" (RTK GNSS/GPS) antenna base station pole/mast to a vertical surface (with second design for a surface with a 3.5º outward tilt ). Two mounts: Lower mount: Has a…
Ersatzmulde für Rimowa Koffer Schloss. Gedruckt aus Prusament PC Blend. 100% Infill, 0,10mm Schichthöhe.
Replace the original wheels and you’ll no longer have to worry about the mower getting stuck on rough or slippery terrain. Taking the wheels off and fitting new ones isn’t exactly easy, but I’m sure you’ll manage it. Use two large…
This 3D model is a replacement part for the wheel cap retainer (clamping washer / starlock washer) for the STIHL / Viking iMow 632 robotic lawn mower series. The original part often breaks or gets lost when removing the wheels. Without…
This is my first model created with Autodesk Fusion. I thought this would be an easy project to help "get my feet wet" in the app. I had downloaded and printed several differnt designs and size discs to try on my lawnmower. I liked having…
Aufrüstung von 6 auf 9 Messer plus Rotor damit bleibt weniger Abschnitt im Gehäuse
ust a bracket to attach metal fence spindle to the Navimow gate as they only supply a few brackets and mostly made for wooden fence. Fits 10mm spindles. I included 3 variation; 1x 40mm version (1 spacing width) with a larger slots to…
Die Halterung eignet sich perfekt zur Montage der Segway Navimow Antenne an einer Wand. --- The bracket is perfect for mounting the Segway Navimow antenna on a wall.
This 3D model is a replacement part for the wheel cap retainer (clamping washer / starlock washer) for the STIHL / Viking iMow 632 robotic lawn mower series. The original part often breaks or gets lost when removing the wheels. Without…
The original Rimowa steel loops that hold the compression strap for the dividers down didn't last very long. This is my attempt to make them sturdier. Printed in PETG with 5x (walls, top & bottom), 50% infill
Um den Abstand zwischen Scheibe und Klinge wie beim orig. nachtzustellen, empfehle ich noch zusätzlich eine 4mm Scheibe beizulegen. Damit drückt sich auch der Schraubenansatz nicht in den Kunststoff ein. Verwendet werden normale M4…
