Liczymy pasujące modele…
A remix of these amazing models found here: http://www.thingiverse.com/thing:463063 To print, lay them on their backs, have supports on, use a brim, and have the "Combine all" option selected in Cura. Want to access even more models not…
Eren Jaeger in Titan Form. mix of the 3 best versions I have found. Head/Midsection/legs.
Description This upload contains several CAD models of electrical switch components compatible with Busch-Jaeger Reflex SI . All parts were independently modeled based on real measurements of existing components. They are not original…
Eren Jaeger from Attack On Titan. Print requires supports. Wires to swords have been removed to aid in printability.
This design was modeled it after a Jaeger-LeCoutre Gyrotourbillon, which they offer in several of their high-end watches. I tried to make the model an accurate (scaled up) version of the original mechanism, which is less that 10mm in…
Source: https://www.models-resource.com/mobile/thesevendeadlysinsgrandcross/model/66942/
Aufputz Gehäuse für Busch Jäger Balance Si Serie. Für 1-Fach, 2-Fach und 3-Fach - Rahmen. Update: Auf Wunsch von @David_1297020 eine 2x2 Variante hinzugefügt. Surface-mounted housing for “Busch Jäger Balance Si series”. For 1-compartment,…
We have one of the very common Busch-Jäger double lightswitches (type: 2511-21) in our bathroom for controlling the lights and the ventilation. Very often the ventilation gets turned on accidentally and runs for the whole day without…
Ersatzabdeckrahmen kompatibel zur Serie future® linear von Busch-Jaeger. Modelldateien für 1-fach, 2-fach, 3-fach, 4-fach und 5-fach-Rahmen Am besten auf der Sichtseite liegend mit Stützmaterial drucken. Ich verwendete PETG mit PLA als…
Socket outlet for the "future® linear" Switch range by Busch-Jaeger.
A simple model of the Jägermeister logo. On request, the lid can be printed and glued on, making it easier to hang up the logo. I have attached LED strips to the back of my print and fed them through the existing hole, thanks to ESP8266 I…
I build a simple light switch to replace my Busch-Jaeger switch, which I lost during a renovation. Works like a charm!
This is an adapter plate for the Philips Hue Dimmer v2. It fits on Busch Jaeger wall switches using only the clip of the switch. It is a remix of https://www.thingiverse.com/thing:2905340 by Hoelle and…
Adapter that enables usage of ABB / Busch-Jaeger dimmer knobs (6mm) on dimmers with 4mm shaft (e.g Elko compatible). I created the adapter to mount ABB Jussi knobs from previous dimmers on MicroMatic MicroDim ZB250 zigbee smart dimmers.
The Jägermeister emergency bottle in a manual call point. In case of an "acute fire/thirst incident", simply break the glass and be happy. :-D You still need: 1 bottle 4cl Jägermeister 1 bottle of model building / superglue Hot glue gun 5…
For my house I created these Glow in the dark edges for Busch Jaeger switches/sockets/a.s.o. Meant for finding the switches etc. in the dark. Easy install behind the plate. Take off the plate, put the glow in the dark edge behind the…
I had a few extra flush-mounted boxes for future use. But the original Busch-Jaeger blind caps are much too expensive. So I designed my own blind caps. I printed them with ASA Natur from Material4Print. The color matches pretty exactly…
Square light switch compatible with Busch-Jaeger. Includes a snap-in frame and a rocker-style switch plate. Clean design, easy to mount, and fits standard Busch-Jaeger mechanisms.
Transform your trailer connection with this practical adapter! I upgraded my trailer connection from a 7-pin plug to a 13-pin Jaeger connector, but discovered the new plug wouldn't fit in the original holder. This model solves that…
I remixed the Baby Safety Outlet Plug Cover (https://www.prusaprinters.org/de/prints/87642-baby-safety-outlet-plug-cover) to fit the Busch Jaeger Outlets we have in our house.
This Zentralscheibe is specifically designed for the BuschJaeger Future Linear collection to fill the gap around the Shelly Blu Button, creating a sleek and seamless look. Whether you're upgrading or customizing your smart home setup,…
The edges of some wall outlets weren't very nice finished and there wasn't an ability to plaster them again. So I designed an easy and simple cover to extend the window of the wall outlet a bit, in this case 10 mm. This is specific for…
This is an adapter plate I made for an existing network connector (UAE), that had to fit into a new Busch-Jaeger Balance SI frame. Project file is included for you to make modifications to the inside dimensions. I printed it in Sun White…
Schuko Steckdosen Einsatz passend zur Busch Jaeger "future® linear" mit verstärkten Elementen so dass beim Assemblieren nichts bricht.
Square frame compatible with Busch-Jaeger switches. Snaps securely over the mechanism and holds the switch plate in place.
There is never an outlet exactely where you need it. Especially on desks or countertops. Our kitchen did not have any outlets on the wall where we put the countertop. This print provides two installation boxes at a 45° angle to mount a…
In my smarthome I use Tuya zigbee 4 Gang switches, that were mounted above the normal Busch Jaeger switch, but the switches look different and you don't use the original switch anymore, so it's a bit obsolete, but wanted to keep it, in…
Rozeberte stávající teploměr a přeskládejte ho do nové krabičky. Originální krabička má desku zasunutou v plastovém držáku, ten jsem pro pohodlný tisk (bez podpěr) nemodeloval. Přidejte 2 další šroubky, aby teploměr správně držel. Deska…
This adapter plate works for fitting a Busch-Jaeger Reflex SI light switches as a blanking plate. Ideal for cleanly covering unused outlet slots while matching existing frames.
Mit diesem Adapter lässt sich die Warema-Rolladensteuerung in eine Steckerleiste von Busch-Jaeger einbauen.
It has to parts. An adapter for your Somfy remote control wich fits perfectly into a Busch Jaeger power outlet/light switch and a lid to cover it. You assamble it this way: 1: You put the adapter into the Busch Jaeger part, from behind.…
Hab es danach abgeschliffen und mit einem weißen Sprühlack besprüht. Gedruckt mit support
Block light switch and put a Hue Tab dial (mini) or Hue Smart Knob on it.
Remove the existing Jussi/Reflex SI cover frame and replace it with the new adapter cover frame. For 2-gang to 5-gang switches, there is an additional cover plate if you want to block access to those light switches. To my understanding,…
This two-part adapter allows a Somfy Smoove roller shutter switch to fit into a Busch-Jäger Future Linear frame. The mounting plate screws into the flush-mount box and provides the correct geometry to hold the Smoove securely. The…
I was looking around to integrate the Hue Remote into my Reflex SI System. And best to cover the existing switch, because this one need to be always on now. There was a design but that did not cover everything behind so I created my own…
Adapter for gapfilling for Busch-Jaeger Future linear frames and Loxone componentents. Tested wit Loxone Nano IO Air and Touch for Nano. Also Tested with Loxone Touch Air For mounting is also the mountingframe Type1 needed:…
💖 Support Me If you like this model and want to use it for commercial purposes , you can support me on Patreon and get a commercial license https://www.patreon.com/cw/MonsieurPierre This 3D model is a fan art figurine inspired by Eren…
This is holder for a Ikea Tradfri remote. The holder fits perfectly on a Busch-Jaeger Solo frame for a light switch. Busch Jaeger product code is 2CKA001754A4109 The holder fits between the wall en the BJ frame. The Ikea remote must be…
I want to replace my regular light switch with a Tuya smart switch. Since I prefer not to bridge the old switch permanently, I decided to use a cover and attach the smart switch to it instead. During my search for a suitable model, I came…
Just a Digitus DeleyCON Network Socket Cover for Busch Jaeger "future® linear"
A fast printing clip-in cover for Busch Jaeger "Duro 2000" and "Reflex" Frames. Version with 10mm hole is a easy way to mount a dimmer knob . Does not need supports. Inspired by…
Rocker-style switch plate designed to fit inside the frame and press onto the Busch-Jaeger mechanism. Smooth action and clean look.
This is holder for a Ikea Tradfri remote. The holder fits perfectly on a Busch-Jaeger Solo frame for a light switch. Busch Jaeger product code is 2CKA001754A4109 The holder fits between the wall en the BJ frame. The Ikea remote must be…
3fach Steckdosen Rahmen wie Busch Jaeger Duro SI mit mittigem 55x55 Rahmen für z.B. Homematic IP Thermostat
Combination of “ Blinddeckel für Busch Jäger Reflex SI Abdeckrahmen ” and “ Shelly 1 PM plus + Shelly Dimmer 2 mount for Gira 55 ” to mount a Shelly 1 PM in a Busch-Jaeger frame. I used PLA+ on an Anycubic Kobra 2 Max (60°/220°)
English The frame is assembled in the same way as the original frame of the light switch. For the new dimmer you need 4 (two are probably enough) 3.5x16mm countersunk head wood screws. I modeled the models based on my Busch-Jäger Balance…
Einleitung Mit diesem Adapter lässt sich ein Shelly Switch 4 nahtlos in bestehende Schalter- /Steckdosenrahmen integrieren. Anstatt optisch abweichende Shelly-Schalter im Wohnraum zu installieren, kann der Shelly Switch unauffällig an die…
I couldn't find anything for Busch-Jaeger Hue dimmer switch holder for over the original switch with thread on a 60 mm pitch. So I drawed my own. I just put the internal switch inside. You can also use welding clamps, but you should know…
based on https://www.printables.com/model/383077-cover-plate-for-busch-jeag
I bought a few WiFi dimmers that are to be installed behind your wall mounted light switch. The junction box in my concrete wall was to small to house the WiFi dimmer unit, so I designed a bigger cover for my existing switch and wall…
The ring has an inner diameter of 6mm. The plate on the bottom has a diameter of 15mm. For me the diameter matches perfectly the Busch Dimmer 2250 U. ------------------------------------------------------------------------------------ Der…
This print is compatible with the Busch Jaeger Busch-Duro® 2000 SI design and fits perfectly. For me the print sticks well enough without any screws used. This is compatible with a Ziggo DIO-01 Coax signaal overnamepunt. Feel free to…
Acetech Brighter R Tracer Adapter for the Jaeger Precision STFU Mock Suppressor Designed for a 11mm right hand to 14mm adapter that the tracer screws onto
A Apollo MSR-2 Mount for Busch Jaeger Reflex SI I came up with this, because there was no perfect position for my apollo msr-2. I installed a 230V to 5V converter in the wall and all you see (at least in this Version) is a cable and the…
This is an adapter from a Busch Jaeger wall switch to 3 Philips Hue dimmers. You can use double-sided tape to put it on the wall switch. There are magnets (2 per dimmer) at the back of the adapter. I have used Neodymium magnet 10x2mm.…
I made this because I was in search of a sleek solution for wiring up an oven with false plug protection within the Reflex SI series. Sadly, there are none (even without false plug protection or any plugs at all for that matter), so I had…
This knob / button is designed to fit an ABB 6523 UR 103 LED dimmer , which was originally covered by a Busch-Jaeger dimmer place and knob . The mounting hub on the original knob broke after 8 years of use. This model has been designed to…
An adapter to fit a Duco ventilation remote control module (its own frame removed) into a Bush Jaeger frame. There is no need to make a hole in the wall. In my case I replaced the frame for one switch with a frame for two. One half covers…
I always wanted mmWave Motionsensors inside my house. And I had several “blind switches” because of smart lights which have to stay on all the time so here's a (imho) really cool mount for your Everything Presences Lite. Things to print:…
Designed by myself. Use it for your inspiration Gamertag "SpackenJaeger" illustrated Letters in curved 3D Material PLA Layer 2mm
This model replaces the switch rocker of the BuschJaeger Balance SI series and allows the use of a Hue Button instead. A small magnet (ø = 15 mm, height = 1,6 mm) is inserted on the back so that the Hue Button holds magnetically. Due to…
Made for 100ml jaegermeister bottle. (more pictures comming soon)
I made this because I was in search of a sleek solution for wiring up a large fridge with false plug protection within the Reflex SI series. Sadly, there are none (even without false plug protection or any plugs at all for that matter),…
Since I installed a splash guard in the kitchen, the foot of the wheel (regulator) has become too short. Thanks to the extension, the wheel fits without needing to change anything.
Label for emergency Jaegermeister German Beschriftung oben und unten für das entsprechende Modell auf Deutsch
This design is created to replace the Duwi or zwave.me zwave modules while being able to keep using your Everlux and/or Busch-Jeager Duro 2000 switchgear. This is done by placing two micro switches into the print and place them behind the…
Front Plate / Abdeckrahmen to directly integrae Philips HUE Dimmer and TapDial
Fits Series: Busch-Jaeger Reflex SI (and possibly similar) Button supports a stroke of 5mm push-in function for turning the light on and off. Dimmer shaft: 4 mm Check the shaft and cover dimensions against yours before printing. The…
Do you have your underfloor heating thermostat mounted in a multi-gang frame directly next to or below light switches? It’s far too easy to bump into the temperature wheel when reaching for the switch in the dark or in a hurry. This…
3fach Steckdosen Rahmen wie Busch Jaeger Duro SI mit mittigem 55x55 Rahmen für z.B. Homematic IP Thermostat
Hab es danach abgeschliffen und mit einem weißen Sprühlack besprüht. Gedruckt mit support
Aufputz Gehäuse für Busch Jäger Balance Si Serie. Für 1-Fach, 2-Fach und 3-Fach - Rahmen. Update: Auf Wunsch von @David_1297020 eine 2x2 Variante hinzugefügt. Surface-mounted housing for “Busch Jäger Balance Si series”. For 1-compartment,…
Hi, this is an insert for the Busch Jaeger Duro 2000 switch series. It clips directly on the frame and has no additional fasteners. So, it is primarily designed to cover empty slots in a multi frame. It can also be used if you want to…
A cover to prevent me from switching the light off, so that smart lights stay controllable.
Just a Friends of Hue - Busch-Jaeger - Frame Replacement. 15% Infill, Print with Supports.
Busch-Jaeger Balance SI future linear 0531-4-4833 Support structure needed, adviced to print the support structure with support material. V2 is 3D-Print-optimized. When a seperate support material is used, the V3 has less print time.
Edit 18.03.2024: Added a 1 way and a 3 way cover plate Power Outlet Cover / Light Switch Set to fit the looking of Busch-Jaeger Balance SI future linear
Light switch plate (Schaltwippe) for Busch-Jaeger Duro 2000
Gedruckt wurde auf einem Prusa MK4 mit 0.4er Düse, PETG Auf dem Foto ist die Schaltwippe 2-farbig mit Schriftzug, die Konstruktionsdateien sind neutral. Die .F3D-Datei und .STEP-Dateien liegen bei, falls jemand nachbearbeiten (z.B.…
This is a little insert i made for mounting a pt100 sensor behind Busch-Jaeger blank plates. It also has a spot for 2 WAGO 221-412 clamps on the back to make installation easier.
This is a model of a Busch-Jaeger insert for mounting blank cover plates. I do not recommend you use it as is as the tabs in this model are very easy to break if you don't have perfect layer adhesion like when printing PP. This is just a…
This print is compatible with the Busch Jaeger Busch-Duro® 2000 SI design and fits perfectly. For me the print sticks well enough without any screws used. Is compatible with a regular keystone. Feel free to modify it! ;) The print at the…
