Liczymy pasujące modele…
I was told I had uploaded this on other sites, but not here on Printables. This is now corrected. Enjoy! :) Jon Snow. It is difficult to write much about this character without spoiling things for those who haven't yet seen the entire arc…
Jonsbo/Jonsplus Z20 Feet Riser It's 30mm high, but even if it's higher than this, there's no change in temperature, so I think it's the best length Based on the Thermalright TL-S12 system fan 1000rpm I'm using, the internal temperature…
printed as full solid. small supportstructures for the protruding pin.
This is my rather bold attempt at recreating the famous Jon Mud cube, he is not screaming in this picture but rather holds a blank stare. I say bold as I usually do not do much 3D sculpting to this degree, either way, I hope this model…
I wanted better temps for my system so i modded a duct for fresh air intake and a mount for 2x 120mm fans in the bottom. For the 2x 120mm Fan shoud in the bottom you need to cut out some parts that are in the way and also need to remove…
The riser goes on like an adapter its placed on top of the original feet and it raises the case by 11mm. You need four M3.5 x 18mm screws.
Bring the King in the North to life with this stunning 3D printable Jon Snow figurine that captures every detail of Westeros' most beloved hero. This meticulously crafted STL model showcases Jon in his iconic Night's Watch cloak with…
These brackets allow an SFX power supply to be mounted with its connector side facing the existing cable channel on the Z20 computer case, in the style of BTS or Project Zero motherboards. This cleans up the interior of the case and might…
This is the Holy Grail from Indiana Jones and the Last Crusade. I modeled it in Fusion. I used supports on the underside of the cup but that was it. Please leave a make and I hope you enjoy printing this amazing prop
This is the front cable cover of the Jonsbo Z20 case With the case on the side, I made a cover that covers the cable because it keeps showing. It's fixed to the frame using a 6x3 magnet At first, I wanted to follow the design of the case…
This is a simple Jon boat game token for monopoly or similar games that I made for the tokens design contest.
Jonsbo N6 rear fan mount, the round holes in the oem mount where extremely noisy for me. This mount quiets it down to a bearable level.
I made this to launch tiny mice into my hallway for my cat https://youtu.be/WJa3cPQA99g
Sorry, my English is bad, this is google translate. My experimental project of dust filters for PC, which was motivated by the original filters from the excellent compact case Jonsbo Z20, which perfectly protect against mosquitoes and…
IKEA Jonaxel wire basket wall mount.
This model was made with the waterfowler in mind. I wanted a place for the essentials while out duck hunting in the boat..... COFFEE AND AMMO! I have added a mirrored file so you can print one for both sides of the boat. Printed in PETG.
Wyjątkowe popiersie inspirowane postacią Hellboya – idealna dekoracja dla fanów komiksów, filmów i kolekcjonerskich figurek. Model przedstawia charakterystyczną, muskularną sylwetkę, rogi oraz rozpoznawalny wygląd bohatera. Doskonale…
Count stopper for KJ-8310C mahjong table. Printed in PETG with 0.4 mm nozzle and 0.2 mm layer height. Super glue a 10 mm x 2 mm magnet in there.Tap the larger hole with a M4 tap.
Lesson Plan & Constraints: The Objective of this print in place project was to take an image online and trace that image in the software Solidworks and make it a 3D object within a 8cmx8cm constraint box. While doing this my partner and I…
I tried multiple variations and adjusted the dimensions to perfectly match the JONAXEL. This one is super tight and strong.
In my case, I managed to print the Dodecathleon flower pot from the second attempt, after I added the improvements I mentioned in the model description and rotated the model a bit so there were no strictly horizontal planes. See the photo…
Ablageschale für Zeiss 85mm f 4 mit Nikon Bajonett. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann. ……………………. Storage tray for Zeiss 85mm f 4 with Nikon bayonet. The tray is 1 to 2…
Permet de ranger les 5 dés et le stylo (la version sur la photo est un premier a eu un problème d'impression et le crochet qui s'accroche sur la reliure n'est pas présent). Filament PLA Pearl RED de chez PRUSA. Le blanc, c'est de la pâte…
The model allows to mount a microphone at the hole of a Cajon. The holder has a mounting position for. Due to the long arms, there is a support ring, that stiffens the arms. I attached felt gliders at the claws (see pictures) to get a…
YouTube demo video: https://youtu.be/58Jl6n0qayw YouTube build video: https://youtu.be/NGpEOg99Y-0 A radio controlled version of the 'Prober' vehicle from the 'Jonny Quest' show. The episode is S1E18 called 'Pirates from Below'. It's a…
This model is designed for the ASUS N100I-D mainboard inside the Jonsbo N2 case. It mounts directly onto the CPU heatsink and allows you to attach an additional 120mm fan. It's is also compatible with…
This is my rather bold attempt at recreating the famous Jon Mud cube, he is not screaming in this picture but rather holds a blank stare. I say bold as I usually do not do much 3D sculpting to this degree, either way, I hope this model…
Printable 3D model. Torregrossa is a tower located in Jijona's castle (Spain). STL file.
Front panel with "mesh", blank, and diagonal variant. Image 1 showcases the mesh variant, with a version with some window screen glued on the back. Image 2 showcases just the mesh variant, and Image 3 showcases the blank Updated 14 Jan…
The holes line up for the back holes, there are 10mm holes left for the magnets, there is one required for each screw, 2 for the top, and 2 for the bottom, totaling 8. The fan and case both have magnetic screws, which is the primary…
Hey visitor, found your favorite film or TV show? Check out the full movie collection here: https://www.printables.com/@WalterSpanu_3005190/collections/2922712 Game of Thrones-themed low-relief wall plaque in silhouette style, characters…
Concepto de Diseño El Diapasón de Cajón está diseñado para imitar la experiencia de tocar un cajón en un formato compacto y portátil, perfecto para los aficionados a la percusión con los dedos. Uso Ideal para practicar ritmo y técnicas en…
A PSU mount that place the SFX closer to the front and the top. BOM: 2x inserts M4x5 D6 2x inserts M3x4 D5 2x M4x12 or bigger 2x M3x10 D965B (can use smaller M3x8 should be ideal)
This feet makes use of the original screw. Have a spot for glides.
Jonah and the Whale Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) See my other Statues here: https://www.printables.com/@StudioMechanik/collections/2993601
David Bowie (David Robert Jones) – Buste 🇫🇷 Description (Français) Ce buste représente David Bowie , né David Robert Jones , figure majeure de la musique et de la culture populaire du XXᵉ siècle. Le modèle est inspiré de la photographie…
These models are intended for decorative and display purposes and can be freely scaled or customized for personal projects. 📃 Usage & Licensing 🔹 Personal Use: You may print and display this model for your own enjoyment. 🔒 Commercial Use…
Philips OneBlade y Kingdom Come libro hueco con cajon para el cargador cabezales y accesorios
A new 3D figurine generated by AI, a Chibi Indiana Jones. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the camera…
🔹 Casual & human 🔹 Enjoyed this model? This model was generated using AI. The model may not be technically correct and may require further modifications before printing. Printing and use are entirely at your own risk. Coffee = motivation ☕😄
Disney Indiana Jones Magnetic Mickey Mouse Ear Category: Other
Disney Indiana Jones Stunt Show Magnetic Mickey MouseEar Category: Other
I create all my models in my free time. If you'd like to support my work, I would really appreciate a small donation. ☕ ℹ This model allows the installation of 2x 120 mm fans while retaining the original front cover. UPDATE 2026-07-09:…
I create all my models in my free time. If you'd like to support my work, I would really appreciate a small donation . ☕ ℹ Jonsbo N6 Air Vent Blockers for front, back and sides. ✅ Compatibility Jonsbo N6 NAS case ⚙ Print settings No…
Jonsbo N6 rear fan mount, the round holes in the oem mount where extremely noisy for me. This mount quiets it down to a bearable level.
Material: Glow in the dark PETG Settings: 4 walls 20% sparse infill Filament Changes: Start: Blue Layer 21: Red Layer 30: White Layer 40: Blue
The Jonsbo D32 case is a really cool and compact case, but its small dimensions pushes the user to find different air cooling paths. One of these paths sees a back intake and top exhaust but the case lacks both a back filter and a…
Tenbou sticks used for Riichi Mahjong These Tenbou Sticks are designed to be printed on single color printers, they are slightly flat on both sides for easier printing. Pick your own colors, here's my selection and how many of each to…
Ułatw sobie codzienne sprzątanie dzięki funkcjonalnemu adapterowi do kija o średnicy 25 mm. To praktyczne rozwiązanie, które zwiększa wygodę użytkowania i pomaga utrzymać porządek w domu, garażu lub warsztacie. Adapter został…
Jon Bon Jovi - Slippery When Wet - 1986 3D printable model.
Hueforge 5 couleurs Préréglages Extra-fine 0.08mm - Buse 0.4mm - 2 parois - 100% remplissage Type de bordure : Extérieure uniquement - 5mm - Ecart bord-objet 0mm Cadre inclus dans le Gcode, possibilité d'en modifier la couleur Commencez…
Bring controversial charisma to your space with this incredibly detailed 3D printable figurine that captures every nuance in stunning digital craftsmanship. This meticulously designed STL model showcases the distinctive features and…
Huge thank you to Printables user soozafone for creating my new obsession, Lucky 13 . Supports will be needed for the Hat and Head You will need the Lucky 13 armature and skin found here…
Gedruckt wurde auf einem Prusa MK4 mit 0,4er Düse, PETG Der Flachring ist in verstärkter Ausführung OHNE den O-Ring an der Unterseite damit die Rille für den O-Ring KEINE Sollbruchstelle ist. Für mehr Stabilität hatte ich “Perimeter” = 8…
A riichi mahjong compass suitable for use the larger, Chinese, mahjong tiles
voici le tube de jonction entre le clapet et le ventilateur de la borne anti-moustique LAMI V2 DIY n'oubliez pas le calcul de rétrécissement de votre filament je l'ai imprimer en PETG la valeur de l'échelle est donc de 100,42 % pour les X…
Este diseño forma parte de las piezas fundamentales de la decoración del cofre del hombre muerto de la película piratas del caribe. Junto a este modelo se subirán mas adelante las piezas de decoración restantes, ya que por ahora están en…
Conversion kit to turn an IKEA Jonaxel Shelving Unit (50x51x70 cm) into a 19" rack. This model fits 1U of equipment. Designed to use M5 nuts and bolts to attach to the Jonaxel, and M6 bolts for the rack mount equipment. You will need to…
A great Wall Art of Indiana Jones. Do not forget to upload your makes, thanks ! Inspired by a sticker
Modelo Gratis del emblematico y carismatico loro de tadeo jones la pelicula de dibujos animados. espero que lo disfrutes. Siguenos y deja tu like. Parámetros de impresión 3D Impreso en resina en fdm altura de capa 0.12 soportes arbol…
Ikea made a toilet paper holder under the name LILLASJON that has a barrel surrounding the roll, with a shelf insert on the top. Big box stores that sell “jumbo” rolls in bulk are a touch oversized for this setup, which required removing…
Esta estatua sale con el gesto nuevo de la FNCS "¡Victoria!" El modelo mide aprox 25cm de alto es una excelente adición a tu colección de objetos de Fornite :D Esta divido en 2 partes y ya incluye un pequeño conector para que no quede…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions: Start with Black At layer #8 (0.66mm) swap to Jade White for the rest.
So, I needed a reflector for my Elinchrom Ranger. No retailer nearby and photoshoot coming up soon. Desperate circumstances result in desperate solutions. Measured the safety-cap and the Bajonett it get attached with. Created a version of…
I'm not going to do a full write up of this however here's the part list and files in case anyone want's to make their own. I was given an Indiana Jones figure and spent a day drawing up this is a minecart loosely based on the one in the…
This is the design of Dany Sánchez , but I added the Arabic and Chinese numbers, since my play-mates sometimes cannot remember which wind is which number. To get nice contrast between the characters and the base of the token, you can…
This is a set of blocks that can be used to recreate the Indiana Jones figure at 500% scale. This figure was included in 15 different sets from 2008 to 2009 such as Indiana Jones and the Lost Tomb , Indiana Jones Motorcycle Chase , and…
needs supports Cool website i found🙃 Tutorhelp.Ignorlist.Com
Brotherhood of the Cruciform Pendant(s), Indiana Jones and The Last Crusade Category: Props
Gedruckt wurde auf einem Prusa MK4S mit 0.4er Düse, PETG. Stützen war eingeschaltet. “Perimeter”, “massive Schichten” “Boden” und “Oben” hatte ich wegen der Stabilität auf 5 gestellt. Wenn sie die Sitzschale, wie auf dem Foto zu sehen,…
the size 25x18 is the outside of the cable trunking (consequently, the inner space of each joint covers) if there's a lot of downloads, i might consider building the 2 missings parts "90 OUT" & “END”
No requiere de soportes a la hora de imprimir. Se puede escalar a la medida deseada directamente desde el laminador. Free supports It can be scaled to the desired size from the slicer.
Do what you want with my fan-made Airy model :p Finally updated, hope this is super, if not, the most accurate model For the limbs i would use a wire of some sorts or a pipe cleaner, no idea how you would do the face, i mean you could…
Kirby as Indiana Jones keychain I think it's pretty cool. PLEASE LIKE (still tryna get a 3d printer)
Lichtgevend jongens naam Isaac, Luminous boys name Isaac
Lichtgevende jongens naam Linus, Luminous boys name Linus
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm Swap Instructions: Start with Black At layer #8 (0.66mm) swap to Jade White for the rest.
Interested in selling physical prints of this design? Terra de Verdant offers access to over 300 high-quality STL designs just like this one. You can download all our designs and gain legal right to sell the physical prints by joining our…
Lichtgevende jongens naam August, Luminous boys name August.
We play Mahjong every Saturday, or should I say we are learning. This model is a rack I designed and printed which can be used to hold the tiles, melds and to build the wall. The black line is just a color change to allow players to fit…
Lesson Plan & Constraints: The Objective of this print in place project was to take an image online and trace that image in the software Solidworks and make it a 3D object within a 8cmx8cm constraint box. While doing this my partner and I…
Remix of the fan duct by D3Cove here: https://www.printables.com/model/377029-jonsbo-n1-fan-and-hdd-air-ducts My particular (Phanteks) fan left gaps that allowed air to escape so I added some solid parts to close up the gaps.
Cover for the Jonsbo N1 front I/O and faceplate holes to make the front look nicer if not using the faceplate. Contains a front I/O cover, two screw hole covers, and four nuts so you don't need any other hardware to secure it. The front…
I tried multiple variations and adjusted the dimensions to perfectly match the JONAXEL. This one is super tight and strong.
Une boite à glisser dans le calendrier de 365 Aventures – Le Donjon pour ranger ses dés, son crayon et autre chose si nécessaire
UPDATE: I slightly tweaked the HDD baseplane, now the hdd slides perfectly. Every tenth of a millimeter counts. UPDATE 2: I modified the HDD part and removed the extrusion. I uploaded the full fusion 360 file under the name v2.1, and the…
Bajonet NIKON/T2 pre CCD Moravian Instruments, distance 9, 10, 11 mm
![[Hot swappable] Jonsbo NV10 Back Panel 200mm Fan Mount](https://media.printables.com/media/prints/c2dc7d22-3709-4cd1-b4e9-4cef8ca4a86e/images/11657716_472503c3-9302-457d-8cea-0a4e9919a52f_0c930671-3ae6-45ee-9d2e-98047222da71/20260107_084455.jpg)
