1046 modeli
The 21 Cup Rubbermaid containers are getting harder to find and usually more expensive. Here is another great option from the community. https://www.printables.com/model/952313-filament-dry-box-with-rollers This is a spool skate that fits…
I needed cheap, low-working-load sheave blocks for theatrical rigging to fit 3-4mm VB (Venetian blind) polyester cord, so I decided to design some that use ubiquitous & cheap 608/608ZZ bearings for smooth running. I had a bunch already…
This 3D-printed bowl is a compact and stylish solution for organizing your everyday essentials. Perfect for holding keys, AirPods, earrings, coins, and other small items, it helps keep your space neat and clutter-free. With a smooth,…
This case is used to store Bauer Hockey Skates runners. It can also be used for other models of runners like CCM, although True's runners won't fit. Checkout my other models for the TRUE model.
Hello, skater cat badge + keychain. Gcodes provided with a pause during print to swap filament maunally. Thanks for your download, enjoy the print!
Print in PLA or PTEG. Wall thickness 4-6. No support needed.
100x160mm sign, advertising ACME Rocket Skates, as seen in cartoons. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh version. Also see the…
Designed for Printables Flash Contest #101, this finger skateboard I designed features real rolling wheels to give you that tactile feeling. Tried my best to design it without need for supports, but the wheels that do not contact the…
Are you a skater? You will like it. It's very simple and rad! If you like this model, a coffee helps me stay balanced - both on the board and while modeling ☕ 👉 buymeacoffee.com/nexl Thanks for the support 🙏 Print instructions Material:…
Check out the new V2 too :) https://www.printables.com/model/692209-robust-finger-skateboard-v2-durable-rollable-fully/files Board 1: WIth Chamfer Board 2: With radius Printing Instructions: Print the axis massive with as many perimeter…
This is an old version. You can find the updated version here . Introduction I'm Seb, I'm a student and I've been working on the idea of 3D printing a skateboard for more than 2 years. The goal was to print both the trucks and the board…
Fingerboarding is so much fun, this project allows you to print a modular skatepark. All models are made with 3d printing mind so no small features or difficult overhangs. All parts are compatible with each other. Combine and mix…
I have designed these PS5 skates for a buddy of mine. He was super happy about them so I am assuming they fit well enough
Le adapte vanas ruedas a los pies del DUMMY 13 unas ruedas
Give it a “like” and a download, so I can get those sweet sweet Prusameters :) --- This is a simple and effective wall hook for hanging skateboards or scooters on the wall, such as in a garage. I printed a few, and realized I could also…
Jump and grind how you want and where you want. At any time. It is modular, so you can start small and go big over time! Update 2024-01-21: 3rd addon uploaded! Thanks for the first makes :-) Transition from low to high block, small ramp…
Need a ride? Why not Fingerboard... An Open Source Project - Fusion360 File Available! Print instructions Print, Peel, Snap and Play PS: Model toy in the G-code is 86% scale of .stl model files.
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
Can You 3D Print a Skateboard? There are a lot of new features in this updated version (old version) : completely revised instructions material test improvements for easier printing version for Prusa XL or other large printers The project…
Skateboard for DUMMY 13. Now your dummy can shred like the ripper it is, right up until it faceplants. Seriously though, this is a non-functional skateboard best used for posing ground or air tricks using the Lucky 13 display stand. There…
A cool Tech Deck skate park for all your Tech Deck Needs. Railings need supports and feel free to trim it down if it doesn't fit your printer.
I use PET with 15% infill. Supports on rails only.
added a v2 with thicker keychain loop
Tech Deck-Finger Bored Skate Park Does not need to be scaled up or down. It is fully usable with tech decks. I also recommend using blue tack to prevent skate parks movement. Resolution: I used 0.3mm but I recommend using lower like 1.5mm…
skate park compilation by rafster300 on Thingiverse: https://www.thingiverse.com/thing:4794263
This is a fully functional Fingerboard I made. Use glue to attach the trucks and wheels. Make sure you upload your makes. If you like this model, you know what to do... hit that like button! Make sure to follow us so you get notified when…
Do you like skateboards? That will come in handy. It's very simple and rad! Print instructions Really simple skateboard deck wall mount - holder. The holder is designed to easy fix to the wall using one screw. Just attach the board with 1…
I created my own model of U-RAMP for Finger Board - Skate Board for everyone, who need a cool training place for practising skills with Finger Skateboard :-) I did my model of U-RAMP for Finger Board - Skate Board in scale, that You can…
Wall mounted holder for Skateboard / Longboard. Total width: 25 cm Two versions for different wheel diameters: 70 mm and 80 mm Update: As requested, I uploaded version without the screw holes. Happy Printing! Print instructions Print…
Mini Skatepark to play with, use your favourite tech decks to prove your skills over the board with your fingers. Each module has a size equal to 15 x 15 cm. Build your skatepark as you want. Use the dovetail connectors to fit the modules…
Fingerboard with Suspension! & passthrough axles keeping wheels from loose feeling wiggle motions with banded suspension giving way to axle twist. High-friction surfaces like cardboard or leather work best for wheel movement. Quick print…
If you like my work, please consider joining my patreon! This is ideal if you want to sell your prints. patreon.com/JBNeto This is my own take of the famous Robert Planters. There is a whole collection done in the same size so it's all…
Similar to other designs but designed to print without supports. The only hardware required is two skateboard bearings. The mount and spool holder are designed to snap in place ( see image for more details). A long and short variation are…
Ice skate blade cover 30 cm lenght,for 3.5 mm thick blade scale lenght to fit your needs and printer :) should hold on blade by friction, if needed secure it by rubber band no supports
This video shows how this Lazy Kate is used. A lazy kate is generally used to hold bobbins while you ply yarn on a spinning wheel. This design is a colapsable design that fits pieces together and uses magnets to make them more user…
Skateboard Wall Mount Halter If you like it --> press like it :-) Wheel Diameter up to 60mm width for wheels 35mm Printer Brand: Creality Printer: CR10-V2 Rafts: Brim Supports: tree 40 degrees only on bed Resolution: 0.2 Infill: 100 %…
This is a remix from kingCondorDanko's model of a skate obstacle. I detached the rail from the ramp, so that you can print them seperately.
Two hooks to mount a skateboard to the wall. Fits skateboards with a wheel diameter of up to 54mm. Print instructions 0,2 mil quality setting, no support, no brim
Usage Please refer to the license. Mini Snowskate? Mini snowskates are fingerboards meant for use on snow, carpet, or any surface you deem fit. They work much like the single deck snowskates that have gone from winter pass time to pro…
hay que ajustarlo en cura no esta echo para imprimirlo directamente si lo quieres grande te recomiendo hacerlo de 25 a 35 centímetros de largo si no cabe en tu impresora recomiendo hacerlo en varias partes y pegarlo o en algún programa…
Easy to print Skateboard you can play with on your tabletop or other places. It flips jumps and drives nice and is very durable. Perfect for all age groups :) Prusa edition: It has the Prusa name engraved :) You will not need any glue due…
Support needed, infill 15%, no brim, no rafts.
Model of figure skating ice skates. Can be used as a pendant, key ring, necklace, etc.. Ideally print upside down with supports. If you like the model, please give it a like. ❤ Model krasobruslařské brusle. Lze využít jako přívěsek,…
This is a bracket to hang skateboard decks on the wall as a decoration. There are two holes to dowel the bracket to the wall and four to attach the deck. Print on the head as shown in the picture. On the top is a slot for led strips in…
This is a model of 6008ZZ Bearing, that is used to test fit sizes in Fusion 360. It is non functional, however offers dimensional correctness for use in designs. Category: Robotics
I always wanted to print my own Mouse Feet Skates so as soon as i bought my Bambu P1P I decided to measure my Logitech G Pro X Superlight mouse and make it happen :) This is the first version (and probably the only one) I've created for…
Strong model to firmly secure your skateboard to the wall for easy display The wheels of the skateboard will face outward to better protect the walls. Easy installation, after installing the bottom bracket, it can be tested and adjusted…
These skateboard riser pads will elevate your skateboard deck by 1/8 inch and therefore there will be less wheel bites. Wheel bites can occur if the space between your skateboard deck and your wheels is too small. So if you take a sharp…
Simply modeled at Tinkercad
Easy small Skateboard Holder for the display of your Skateboards, made for a friend. For the 0.4mm nozzle, I personally use 0.2mm layers and 99% gyroid infill - from what I read and watched, it should provide the best integrity and part…
Finger Skateboard If the tire does not roll well, adjust the Z-seam setting. (Orca Slicer recommended)
V2: The covers slip of my Bauer ice skates pretty easy because there is no edge to hold on. You probably should only printe these if your skates have a edge or sth. similar. They probably work for figure ice skates V3: Bigger cap for…
Made for fun. Print with %90+ infill Print as shown in picture's besides the rail print as it is in the model I suggest to make all to see what works best using the all in one file
Heyho I built a finger skateboard some time ago and I'm still super happy with it myself :) The first parts I printed back then are still alive and working like the first day. But some people had problems with the pressfit during…
This is a basic screw mounted skateboard holder design. I wanted mounts that were focused on being easy to take boards out and in of - a few models I tried here had far too tight fits and frustrating angles. Screw mounted because I've yet…
This is a 12 cm long by 3.5 cm wide mini skateboard, designed for easy 3D printing and fun finger use. The top features a clean hexagon grip pattern for extra grip. The model is print-in-place, meaning there’s no assembly needed — just…
Printed in PLA or something else you want.
Ice Skate with hook. I remixed this model so the blade is printed alone, that means less supports, easy to print blade in different colour. To assemble skate and blade is not easy, but it is not needed to glue it, just put it in and it…
Holds skateboard on wall Print without top or bottom layer and cool infill for the nice pattern like in the pictures. I find that good double sided tape holds better than small nails but both possible. Mine have been hanging there for 5…
Hold your skateboard or penny on the wall with just one screw
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
Print with variable layer height for best results
Here you can find a suitable skateboard for the "ETP-Robot" Action-Figure. The skateboard is also easy to print and very stable even with PLA. The wheels can be rotated and the wheel carrier is fixed with printed screws. I would be very…
Pequeño llavero de patín lineal.
This is a Lazy Kate that is compatible with bobbins from the EEW 5.0, EEW 5.1, EEW 5.2, and EEW Nano. The little hole and slot allows you to add a piece of elastic so you can tension the bobbin. For more fiber tools see our store at:…
A 3D printable skateboard wheel. It has a stiff core, but it is able to absorb some bumbs. The 608 bearings can be pushed in simple. The core has an offset and is not supporting the full length of the wheel for more grip. It also has some…
Cinnamoroll on the roll, skateboarding.
You need to print out at least: Two rails of your choice Two bumpers Two footpads One tyre You also need Two 608 bearings - pull them out of an old fidget spinner (outer diameter: 22mm, inner diameter: 8mm, thickness: 7mm - or use the…
Hi there, here is my skateboard/longboard wall hanger that was designed to fit into a tight space behind my apartment door. The model is light-weight, prints relatively fast and is strong where it needs to be. I would recommend printing…
This is a Skateboard/Longboard hanger that doesn't require any support, it should be able to hold any size board. it takes about 6 hours to print per piece, so 12 hours total print time. u will also need 4 screws to secure this thing to a…
Slides onto skateboard wheels to stop you from rolling away while practicing difficult tricks
The Wall Mount for Skateboards is a practical and stylish solution for securely storing and displaying skateboards. This innovative mount consists of two parts: one part attaches to the skateboard, while the other is mounted on the wall.…
Here a really cool Skull Hoody Boy sculpture on a skateboard. The colored picture is a picture of the original model file, vertex painted and rendered (with Blender). The picture in single color is to show how it can look if you do no…
Printed In PETG Used 50% plus infill Print with Supports
The mount consists of two separate hangers as you can see in the pictures. They take every standard skateboard truck and also every longboard truck I tested with (Paris, Caliber) and every wheel size from park skate wheels to 90mm…
BOM: 3x M3 Ruthex threaded inserts or similar 3x M3x8 Screws 2x 608 Bearing Edit v2: Since so many have commented it, i added another Ruthex and Screw at the Bottom
This model is compatible with the lego system.
miniature model of skateboarding ramp
A roller Skate carrier, remixed from a bag carrier.
I needed a compact skateboard stand for my dorm room that wouldn't require any wall mounting solutions. I liked the idea of a vertical stand, but couldn't find any that fit my needs. This is a two-part, easy to print skateboard stand that…
This is an ice skate blade cover. It is a symmetrical design, requiring 4 printed parts in total for a pair. To form one cover, 2 pieces have to be attached together by an elastic cord, as shown in the pictures. I recommend using a 2.5mm…
Ice skate earrings - there are two types: single sided and double sided. The single side is best printed with a black bottom and then a white top. The double sided prints are done in height sections as well but with a mirrored pair to be…
Skatepark for fingerboards.
Here's a little techdeck park that I made for my sons. Enjoy!
Skateboard wall mount. Use one on top set of holes or two for broken boards. Get fancy and print with wood pla and stain. Print instructions Licence: Creative Commons - Attribution Category: Household Print Settings Printer Brand:…
Hey Fingerboard fans. I created a modular skateboard park for your fingerboards. Should print with minimal supports, if there is more things you want on there, comment and I can try to add them. Please download and like, just starting and…
I have made this wall mount for my electric longboard Yuneec e-go that has the wheels of 90mm of diameter. Print Settings Printer Brand: Zortrax Printer: Zortrax M200 Rafts: Yes Supports: Yes Resolution: 0.19 Infill: 80% Category: Tool…
My first aggressive inline skate frame design. More about it on my website here .
Easy to print Longboard Holder/Wallount. If you want I can make other dimensions, just let me know. Printed with PLA on Anycubic Mega Zero 2.0 No Support needed.
I made this for my room as a sketch for a concrete fingerboard park.
No support. Simple white design for custom painting.
This model is a model skate board made for the Lucky 13 figurene that has the feet attached to it.
