Liczymy pasujące modele…
Designed for Printables Flash Contest #101, this finger skateboard I designed features real rolling wheels to give you that tactile feeling. Tried my best to design it without need for supports, but the wheels that do not contact the…
Are you a skater? You will like it. It's very simple and rad! If you like this model, a coffee helps me stay balanced - both on the board and while modeling ☕ 👉 buymeacoffee.com/nexl Thanks for the support 🙏 Print instructions Material:…
Check out the new V2 too :) https://www.printables.com/model/692209-robust-finger-skateboard-v2-durable-rollable-fully/files Board 1: WIth Chamfer Board 2: With radius Printing Instructions: Print the axis massive with as many perimeter…
This is an old version. You can find the updated version here . Introduction I'm Seb, I'm a student and I've been working on the idea of 3D printing a skateboard for more than 2 years. The goal was to print both the trucks and the board…
Give it a “like” and a download, so I can get those sweet sweet Prusameters :) --- This is a simple and effective wall hook for hanging skateboards or scooters on the wall, such as in a garage. I printed a few, and realized I could also…
Need a ride? Why not Fingerboard... An Open Source Project - Fusion360 File Available! Print instructions Print, Peel, Snap and Play PS: Model toy in the G-code is 86% scale of .stl model files.
Can You 3D Print a Skateboard? There are a lot of new features in this updated version (old version) : completely revised instructions material test improvements for easier printing version for Prusa XL or other large printers The project…
Skateboard for DUMMY 13. Now your dummy can shred like the ripper it is, right up until it faceplants. Seriously though, this is a non-functional skateboard best used for posing ground or air tricks using the Lucky 13 display stand. There…
I use PET with 15% infill. Supports on rails only.
added a v2 with thicker keychain loop
This is a fully functional Fingerboard I made. Use glue to attach the trucks and wheels. Make sure you upload your makes. If you like this model, you know what to do... hit that like button! Make sure to follow us so you get notified when…
Do you like skateboards? That will come in handy. It's very simple and rad! Print instructions Really simple skateboard deck wall mount - holder. The holder is designed to easy fix to the wall using one screw. Just attach the board with 1…
Wall mounted holder for Skateboard / Longboard. Total width: 25 cm Two versions for different wheel diameters: 70 mm and 80 mm Update: As requested, I uploaded version without the screw holes. Happy Printing! Print instructions Print…
Similar to other designs but designed to print without supports. The only hardware required is two skateboard bearings. The mount and spool holder are designed to snap in place ( see image for more details). A long and short variation are…
Skateboard Wall Mount Halter If you like it --> press like it :-) Wheel Diameter up to 60mm width for wheels 35mm Printer Brand: Creality Printer: CR10-V2 Rafts: Brim Supports: tree 40 degrees only on bed Resolution: 0.2 Infill: 100 %…
Two hooks to mount a skateboard to the wall. Fits skateboards with a wheel diameter of up to 54mm. Print instructions 0,2 mil quality setting, no support, no brim
Easy to print Skateboard you can play with on your tabletop or other places. It flips jumps and drives nice and is very durable. Perfect for all age groups :) Prusa edition: It has the Prusa name engraved :) You will not need any glue due…
Support needed, infill 15%, no brim, no rafts.
This is a bracket to hang skateboard decks on the wall as a decoration. There are two holes to dowel the bracket to the wall and four to attach the deck. Print on the head as shown in the picture. On the top is a slot for led strips in…
This is a model of 6008ZZ Bearing, that is used to test fit sizes in Fusion 360. It is non functional, however offers dimensional correctness for use in designs. Category: Robotics
Strong model to firmly secure your skateboard to the wall for easy display The wheels of the skateboard will face outward to better protect the walls. Easy installation, after installing the bottom bracket, it can be tested and adjusted…
These skateboard riser pads will elevate your skateboard deck by 1/8 inch and therefore there will be less wheel bites. Wheel bites can occur if the space between your skateboard deck and your wheels is too small. So if you take a sharp…
Easy small Skateboard Holder for the display of your Skateboards, made for a friend. For the 0.4mm nozzle, I personally use 0.2mm layers and 99% gyroid infill - from what I read and watched, it should provide the best integrity and part…
Finger Skateboard If the tire does not roll well, adjust the Z-seam setting. (Orca Slicer recommended)
Heyho I built a finger skateboard some time ago and I'm still super happy with it myself :) The first parts I printed back then are still alive and working like the first day. But some people had problems with the pressfit during…
This is a basic screw mounted skateboard holder design. I wanted mounts that were focused on being easy to take boards out and in of - a few models I tried here had far too tight fits and frustrating angles. Screw mounted because I've yet…
This is a 12 cm long by 3.5 cm wide mini skateboard, designed for easy 3D printing and fun finger use. The top features a clean hexagon grip pattern for extra grip. The model is print-in-place, meaning there’s no assembly needed — just…
Holds skateboard on wall Print without top or bottom layer and cool infill for the nice pattern like in the pictures. I find that good double sided tape holds better than small nails but both possible. Mine have been hanging there for 5…
Here you can find a suitable skateboard for the "ETP-Robot" Action-Figure. The skateboard is also easy to print and very stable even with PLA. The wheels can be rotated and the wheel carrier is fixed with printed screws. I would be very…
A 3D printable skateboard wheel. It has a stiff core, but it is able to absorb some bumbs. The 608 bearings can be pushed in simple. The core has an offset and is not supporting the full length of the wheel for more grip. It also has some…
Cinnamoroll on the roll, skateboarding.
You need to print out at least: Two rails of your choice Two bumpers Two footpads One tyre You also need Two 608 bearings - pull them out of an old fidget spinner (outer diameter: 22mm, inner diameter: 8mm, thickness: 7mm - or use the…
Hi there, here is my skateboard/longboard wall hanger that was designed to fit into a tight space behind my apartment door. The model is light-weight, prints relatively fast and is strong where it needs to be. I would recommend printing…
This is a Skateboard/Longboard hanger that doesn't require any support, it should be able to hold any size board. it takes about 6 hours to print per piece, so 12 hours total print time. u will also need 4 screws to secure this thing to a…
Slides onto skateboard wheels to stop you from rolling away while practicing difficult tricks
The Wall Mount for Skateboards is a practical and stylish solution for securely storing and displaying skateboards. This innovative mount consists of two parts: one part attaches to the skateboard, while the other is mounted on the wall.…
Here a really cool Skull Hoody Boy sculpture on a skateboard. The colored picture is a picture of the original model file, vertex painted and rendered (with Blender). The picture in single color is to show how it can look if you do no…
The mount consists of two separate hangers as you can see in the pictures. They take every standard skateboard truck and also every longboard truck I tested with (Paris, Caliber) and every wheel size from park skate wheels to 90mm…
BOM: 3x M3 Ruthex threaded inserts or similar 3x M3x8 Screws 2x 608 Bearing Edit v2: Since so many have commented it, i added another Ruthex and Screw at the Bottom
This model is compatible with the lego system.
I needed a compact skateboard stand for my dorm room that wouldn't require any wall mounting solutions. I liked the idea of a vertical stand, but couldn't find any that fit my needs. This is a two-part, easy to print skateboard stand that…
Skateboard wall mount. Use one on top set of holes or two for broken boards. Get fancy and print with wood pla and stain. Print instructions Licence: Creative Commons - Attribution Category: Household Print Settings Printer Brand:…
Hey Fingerboard fans. I created a modular skateboard park for your fingerboards. Should print with minimal supports, if there is more things you want on there, comment and I can try to add them. Please download and like, just starting and…
I have made this wall mount for my electric longboard Yuneec e-go that has the wheels of 90mm of diameter. Print Settings Printer Brand: Zortrax Printer: Zortrax M200 Rafts: Yes Supports: Yes Resolution: 0.19 Infill: 80% Category: Tool…
Easy to print Longboard Holder/Wallount. If you want I can make other dimensions, just let me know. Printed with PLA on Anycubic Mega Zero 2.0 No Support needed.
No support. Simple white design for custom painting.
This model is a model skate board made for the Lucky 13 figurene that has the feet attached to it.
Skateboard Wall Mount Elevate your skateboard from the floor to the wall with our sleek Skateboard Wall Mount! With just two screws per bracket and two brackets per skateboard, installation is a breeze. Display your board like a work of…
Hi there, I created some fenders for my Evolve GTR skateboard with the 150mm(6inch) all train wheels. I printed the fenders in PETG with 3 perimeters and 0.2 layer height. This way they are still a bit flexibel incase you hit something or…
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal , @paulorfo (Venmo), $paulorfo (Cash App) -------------------------------------------- Skateboard remixed for LOL Surprise A little shorter and the…
For each board, 8 magnets are needed, so 16 magnets are required in total. I designed the model so that it uses magnets with dimensions of 6 mm × 3 mm. In the slicer, a pause needs to be programmed before the cavity for the magnets gets…
3 polar bear poses. 1 skateboard (Flipped to print upside down) Need supports for "Skateboard Pushing" bear. Please use brims for polar bears if needed
This is a 3D printable model of the standard 608 bearing (8×22×7 mm) , the most common bearing used in skateboards, inline skates, and scooters . Dimensions: 8 mm inner, 22 mm outer, 7 mm width Single-row ball bearing design Printable for…
Model This is my first design! Ever since I started 3d printing I wanted to learn how to design stuff. This is what I came up with, this is a Print-In-Place finger skateboard or fingerboard. This is similar to a Tech Deck but a lot…
Magnetic Fidget Skateboards - Perform Tricks, Slides, and Magnetic Stunts! Unleash your creativity with these 3D-printable Magnetic Fidget Skateboards ! Designed for endless fun and tactile satisfaction, each miniature skateboard features…
While similar to other longboard racks, this design is meant to provide a one size fits all alternative. Most wall mounted racks hang the board from the wheels, meaning if someone has wheels that are too big or too small, the rack does…
easy and stylish way to keep a skateboard off the floor, made for 53mm diameter wheels
Primarily designed for Skateboards, but the hook can hold a lot more than that. It's smiles at you, whatever you hang on it. A really friendly and reliable helper so far, for holding our stuff on the wall. I tried it with Skateboards,…
Collection of patterend/stylized riser pads in different heights. In this way, trucks can be adapted to the individual riding style, different front and back truck heights can be compensated and more. Features: - Sleek design that fits…
This is my latest shape for a professional Fingerboard. Print instructions i would suggest to print it in PLA lying on the side of the board with support material on build plate
Skateboard Rad / Skateboard wheel / Longboard wheel D70 x 43 !!! HAFTUNGSAUSSCHLUSS !!! Ich habe sie nicht getestet. Für den Reifen empfehle TPU möglichst hart (100% Füllung). Für die Felgen empfehle ich PETG (100% Füllung, vielleicht…
Skateboard Rad / Skateboard wheel / Longboard wheel D70 x 43 !!! HAFTUNGSAUSSCHLUSS !!! Ich habe sie nicht getestet. Für den Reifen empfehle TPU möglichst hart (100% Füllung). Für die Felgen empfehle ich PETG (100% Füllung, vielleicht…
We had some very strong rain and I need my Meepo hurricane to commute to work (sold my car). I know that the hurricane is water/ splash proof but unfortunately I am not :0 A wet road will get you completely covered in muddy water, so I…
Finger skateboard ramp with grind bar / fingerboard / skateramp
cutted both sides and put them together again to fit a width of 160mm
Hook that attaches to the handle of the bag to carry your skateboard on your back. The model is designed for an Eastpak floid bag but adapts well to other bags. I suggest printing the part vertically to optimize resistance to layer…
All you need to do is print 2 of these and you're done! I do recommend that you get some sort of soft surface to add to the print. I used cork from an old corkboard. Don't forget to leave a like!
This skateboard deck display mount Uses M5 hex nuts that should be heat pressed in for longevity Mount using 25mm M5 screws (or up to 50mm) to thread into the model for additional support Recessed slot on back for a flush wall mounting…
Mount your boards on the wall right by your door. Ready to shred.
This is a simple (but that works) ramp for a small skateboard (like tech deck) that I created. You just need to print and mabye add a grip below and it's ready !
Updated design to fit a standard skateboard bearing (608). I figure this size of bearing is common enough that most people might have one setting around. Print Settings Supports: Yes Resolution: 0.24 Infill: 20% Category: 3D Printer Parts
Just for fun. I used rebar tie wire to assemble the wheels and skateboard body.
The two main parts are printed in PETG with an infill density of 65% to ensure sufficient hardness and robustness. A tolerance of 0.15mm was added to the letters to fit and hold without anything else. They are printed in PLA with 100%…
Remixed from an already great design by fessyfoo. For a clean look I didn't put any screw holes in the Punisher's head. So if needed, a small amount of 3m outdoor tape would keep the top part flat and flush with the wall. This design is…
Mini Skateboard toy, fidget, keychain or whatever you want it to be. Glue is needed for assembly for OPTION 2 ! Please follow the steps in images! In my case Stick 1.5 worked well without glue and for Stick 1.4 I had to use glue.
A dynamic female figure captured mid-trick on a skateboard.
Skateboard hanger combined Hi. This is my first Fusion 360 design. I've found this amazing Skate hangers from @Maker81 (https://www.printables.com/model/128064-skateboard-wall-mount-wandhalter) and used it for my sons skateboard. But…
See original design for instructions. I made the design low profile so it aligns with the runout sensor.
I used 1.04 Flow Rate for this Lightbox. Turned out really nice. 04 Nozzle @ 20% Adaptive Cubic Infill Use Textured Plate Face Down Printed with a Bambu X1C with AMS and Bambu Filament
Wanting a simple easy to print horizontal wall mount for skateboard promotional decks. Print Settings Printer: Eryone Thinker S Rafts: No Supports: No Resolution: 0.25 Infill: 15 Filament: Anycubic PLA Silver Category: Art
I wanted to show off some nostalgic pro boards but didn't want to put a hole in the wall or spend $40 per board on commercial options. I designed this wall mount to use 3M strips and hold new and old-school decks. Hardware * M5 5.8x7.1mm…
Here is a remixed version of achmed20's Skateboard backpack hook. I originally printed it to use with my skateboard and longboard but I found out that the original was better suited for longboards only. This model had the middle sliced…
A simple wall mount for your old (or new) skateboard decks for decorative purposes.
Basic skateboard holder with no visibile screw . It’s perfect for 11mm thick decks and every type of skateboard, this model can easily hold my longboard‘s weight. I printed it in PLA with 2 wall, 40% cubic infill, 0.2mm layer height and…
This is a collection of different shockpads for skateboards / longboards / surfskates and other boards. There are: Normal risers from 1 - 20mm Riser with wide support from 20; 25 ; 30mm Risers with angles in all possible variations They…
WICKED model of a rat on a skateboard. inspired by Nilla Wafer from Alveus Sanctuary
This is the next iteration of my popular Skateboard Wall Mount Hanger . Now with a refined design and a worm texture for multi-material printing. If you like this model, a coffee helps me stay balanced - both on the board and while…
EMO robot skateboard Let's be honest… EMO needs another skateboard he can ride on! =) I am pretty sure: When I don't look at him he is practicing some new tricks… ;-) EMO will hold (a little bit) on to the board with 2x neodym magnets…
Cool finger skateboard to play with at home, outdoors, everywhere!
Printed using PETG. Print as shown in image. Use touching build plate supports only. Set support overhang angle to 60.0 Degrees. 10% infill. Grid infill. .15 resolution.
This is a mount for hanging a skateboard for display. Print one to go vertical and two to go horizontal. It was designed to use #10-24 screws (The ones pictured are 2"), finished off with cap nuts. Counter bore is to allow some space for…
i think it works great for me
NOTE: This is a concept model used for testing and a show model. Never ever use these as a replacement for the real thing! If you decide to try them out, be careful and use proper safety gear. Use at own risk. This was a weekend project i…
It is simple design to be mounted on wall and deck. You just need the stud screws. See pictures. Befor You will drill holes to wall, please assembly printed parts to deck and then make a marks on wall to be shure that all will be right.
This is my take on a skateboard and scooter hook to keep the kids' gear off the garage floor. Printing with PETG, 2 perimeters, and 15% infill seems to be pretty strong and stiff. I printed some with 4 perimeters for extra strength. I did…
Show off your deck's artwork - holds deck ~2.25" from wall to clear shaped decks. #10 screw to mount board. Can be mounted horizontal or vertically, with or without trucks attached. Has 6 mounting holes for old-school or new-school truck…
These simple DeWalt contractor batteries are actually 5S2P of Panasonic/Sanyo NCR20700A cells , with each cell rated at 30A continuous discharge . Use them to make your 10s electric skateboard FLY with 60 amps for a fraction of the cost…
