1155 modeli
This 3D-printed desk organizer is designed to work with Gridfinity by Zack Freedman, and the module inspiration comes from my original desk organizer system . Each module in this project is 6U tall and fits perfectly on 2x4 Gridfinity…
The Clickplate is a Gridfinity baseplate that doesn't utilize magnets. Instead, it secures bins with four small arms per square. The grip is quite strong, as the layer lines interlock with each other. Here is a Video of it in action. Here…
Edit: I just found out that @jerrymk_985120 made the OG Clickfinity . That's where all the magic happened. Sorry I didn't acknowledge all your hard work earlier, Jerry. I couldn't have done what you did. Recently found NoWarrenty's…
This print is a good way to test your TPU, PLA, ABS, etc. After the stickman prints, you can color in the eyes to give it some pop. Or you can change the filament when it gets to the eyes. Don't forget to like this model! Make sure to…
Use an M8 24mm flat washer for heat insulation. You can also add a nut on top of the washer for more protection. Printed with filamentum timberfill rosewood 1mm nozzle
Print details: Material: PLA Recommended layer height: 0.10mm Supports: yes Infill: 15% [Englilsh] https://www.thingiverse.com/thing:2635032 1:12_Kettenkrad model by compon I made a Remix of the following. -No need to paint by using 3…
1:42 Scale German tank destroyer from WW2. There's no moving parts, it's just one solid part. It should print in the orientation I have already sliced it in for maximum strength of the gun barrel. I won't be uploading the Panther tank,…
Kickstarter campaign is live right now over at https://www.kickstarter.com/projects/martinschneider/blockface-a-stamp-kit-to-explore-typography-and-more You can pledge for a DIY kit there if you don't want to source all the materials.…
Small cases for Luckfox Pico Pro/Max (RV1106) and Pico Plus/Mini (RV1103) You can add a piece of clear filament in the hole near the usb-c port to guide the indicator light through (for Pro/Plus/Max). There is also a version without the…
About Brickfinity Brickfinity is a Gridfinity-inspired solution for Ikea ALEX storage units. It's specifically sized for the 6-drawer wide ALEX unit (804.854.23). Because it's sized uniquely, Brickfinity is not compatible with Gridfinity…
3D Printed Backflow Incense Material is PLA 。 FB： https://www.facebook.com/3DPPark/videos/1204277066349363/ Print Settings Printer: CR-10 Rafts: No **Supports:** No Infill: 10 Post-Printing ============= cura1 cura2 cura3 How I Designed…
Plaque d'accueil pour caméra piéton. Reste solidaire du gilet support. PETG privilégié.
Meet SpinDeck Fidget, a 3D-printed stress-relief toy born from the world of skate culture and magnetic magic. It’s made of two mini skate decks, each packed with 8 strong 8x3mm magnets that click, spin, and dance together with every move;…
I wanted a ramp that basically ANY RC mini monster truck could backflip from - so I created it! The right side (in the picture) is a constant curve that goes past 90*. This makes backflips EASY. The left side is a steep ramp (partially to…
I have created this model of the KF-51 Panther tank to print.
This funny egg cup man brings a smile to your breakfast table. Not just at easter. The small character holds your egg while sitting with relaxed legs – perfect for a fun and playful breakfast setup. The design prints easily and does not…
Maybe you like the Original Clickfinity Refined but think it uses too much filament, or maybe you were just looking at different Gridfinity baseplates and found this. Either way, this might be what you are looking for. Clickfinity Refined…
Warrior Cat. Riverclan Hawkfrost.
Absolutely not my best design. 🫤 I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures…
Sd.Kfz. 234 Ver. 2 kitcard 1:100 scale model German eight-wheeled armored reconnaissance vehicle used during World War II, known for its speed, mobility, and distinctive turret design. The Sd.Kfz. 234 Ver. 2 is a kit card model – all…
SKF 6000 Series Ball Bearing Archive
Dive into the architectural elegance of Frankfurt am Main with this 3D model, showcasing the city's iconic skyline! Model created using OSM as well as manually reconstructing several buildings. The Model is completely square. I printed it…
In celebration of ZombieHedgehog's birthday, I designed this waffle. He at waffles on stream to celebrate and I only thought it fitting to design something to go along with the theme! This floppy design is a little different from my other…
A printable and improved (in my opinion) version of the Peter Jones Klickfast Belt Dock in all sizes offered. Featured using my TYT MD-UV390 Klickfast stud . Features Top centred Klickfast dock connector with retaining mechanism Resizable…
First release of my modular rack system. Very plain at this current stage, only empty modules and bricks. You will need to understand basic CAD to get use out of the system at this stage. The included STEP file only includes blank…
I found the KlickFix adapter https://www.thingiverse.com/thing:717890 from LocalwarCorp a while ago, but when I need an adapter with holes in a different location, I couldn't do it properly. So I just measured the one I printed, and…
Heckflügel für Worx Landroid
Backflow Incense This Backflow Incense is designed with Meshmixer. Nuts of the top is used for heat insulation. You also can use anything for heat insulation. Cute Buddha Bank （寶寶佛） by clavenmoo from:…
Klickfast compatible dock to mount on a 25mm strap, for example part of MOLLE or common backpacks. Print settings: 0.12mm give better results on the middle part of the clip. 0.2mm are still fully functional. Printed with PETG. 6 wall…
Modular router plate for the Bosch GKF-12V. Highly inspired and based on thing 3707881 by EpicFazer. I wanted a plate that I could use for different purposes, without having to disassemble the entire thing every time. It also has the…
SKF 6200 series ball bearings archive
Ich habe es mit 0,1 mm Schichthöhe gedruckt, kann sicherlich auch mit mehr gedruckt werden. Wer einen Farbwechsel möchte, bei der 1,6 mm Schicht fängt das Logo an. I printed it with 0.1 mm layer height, can certainly be printed with more.…
Geetech PLA Matte BambuLab X1C Mit Supports
Press for burger patties in 135mm size. Every minced meat shrinks when cooked on the grill or in the frying pan. Depending on the type of meat, fat content and water content, the meat can shrink by 10% to 30%. That's why the press here…
A simple model of a KFC Bucket, the model with integrated supports prints nicely on its own. Print Settings Printer: Anicubic Mega S Rafts: No Supports: Doesn't Matter Resolution: 200 Infill: 15 Filament: Prusament PLA Jet Black Category:…
Table of Contents Overview File Name Convention Instruction for Use How to use the .f3d file in Fusion 360 "Alt File's" Purpose Overview The primary change with his design is in the default ability to combine edges to the baseplate. You…
The Harder and Steenbeck Ultra Airbrush nozzle has holes on the sides, therefore it is almost impossible to create a backflow for cleaning or mixing colors. There is an H&S Cleaning cap (127990), Reinigungskappe in German, but the…
What is this? We all love our honeycomb storage walls! (credits to RostaP ) But there is one main drawback, that once the insert being inserted, they hardly can be removed . So I created an easy swappable insert system, that is still…
Hello, A Bosch GKF 12V-8 is a little bit challenging for milling a circular holes. None of the jigs for circles fits it. Therefore, I designed my own jig. The input requirement was a wide range of radius - usable for small tweeters and…
EDIT: initially forgot to include the wheel file, at the time of writing this its uploaded but hasnt rendered a preview and isnt included when hitting the "download all files" button yet, you can get it from the list of individual files.…
Please use a metal washer or some kind of insulation. Don't put the incense directly on the plastic. Don't burn down your house.
Deutsches Beispiel EU-Kennzeichen Lang und Einzeilig. More of my license number plates: https://www.printables.com/model/1200241-kfz-kennzeichen-sample-german-eu-number-plate-einz…
Upgrade your gaming setup with this stylish and practical wall-mountable display frame designed for PlayStation and Xbox game cases. Featuring a convenient hinge mechanism, this frame allows for quick and easy access to your game…
This gearbox brace replaces the original skidplate. I made it in an attempt to solve the well known Tamiya ORV differential issue. The gearbox brace puts pressure on both sides of the of the differential. This should reduce the chance of…
Each filament shrinks a bit after printing and then you don't have to be surprised if the dimensions are too small. You can do something about that... With this model you can calculate the shrink factor of your filament and later create…
english version below deutsch Ein Stück Frankfurt - Bahnhofsviertel / Innenstadt / Westend - Skyline Cityview Ich habe mir ein Stück Frankfurt im Rahmen gebastelt. Der Druck stellt ca. 1 Quadratkilometer Frankfurt dar, inkl, markanter…
Rev C Update 1/20/22: Added a beefier grip, and adjusted the mode height a bit for better printing (either 0.16 or 0.20 layer height recommended). Also updated the lens mount to what I've been using on other cameras. ---------- Light and…
Input shaping test print for markforged kinematics. Follows the movement correctly to isolate steppers.
This case plunger design will allow the plunger to retract into the case column with a case in the plunge and not damage the case. NOTE: Currently only available for 9mm. However, I plan on offering plungers for other calibers as requests…
A quick remix of the wallet holder to fit a larger wallet and a set of keys. The key holder does go outside of the boundaries of the baseplate.
Eintracht Frankfurt Keychain The keychain was designed by me as a gift for my best friend. :-) We are both Eintracht Frankfurt fans! Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator 2X Rafts: Doesn't Matter Supports:…
A simple Picatinny / NATO rail adapter meant to hold an Olight Arkfeld Pro flashlight and green-laser. Absolutely not intended for duty/precision use – I threw this together just to be goofy by attaching a light and laser to a…
This is a simple wrench I have created to assist in opening and closing the Frankford Arsenal Tumbler. It utilizes 2x m5x50mm bolts to fasten the handle to the wrench. There are two different handles for your choosing: Slim Handle - if…
Bosch GKF 12V-8 Fräszirkel in der Länge (Radius) verstellbar. Ihr wollt große schöne Kreise fräsen? Keine Lust auf Stichsäge? Kreise bis knapp 2m Durchmesser sollten kein Problem sein. Die kleine Platte kann über drei (oder sogar mehr)…
Passt für das Tamiya DT-03 Chassis, besonders für den Neo Fighter Buggy und Racing Fighter Buggy. Die Befestigung des Heckflügels erfolgt mit den im Karosserie-Kit enthaltenen Teilen. Der Heckflügel wurde von mir aus TPU Shore 98A mit 25%…
Das Wappen der Eintracht in Ø250. Einfach weiße Basis drucken und dann nach 2mm Filament auf rot (oder schwarz) wechseln
A set of "filters" to be used as 32mm darkfield filters for microscopes Category: Parts
The Paulskirche was consecrated in 1833 and in 1848 became the seat of the first German National Assembly, on whose drafts the present Basic Law of the Federal Republic of Germany is based. At present, awards ceremonies as well as…
This is a movable model of the Sd.Kfz 302 "Goliath" in a scale of about 1:6 (~25 cm). The Goliath light charge carrier, a self-destructive minitank (German: Leichter Ladungsträger – Goliath), called by the Allies "beetle-tank" was a…
Note: Here are some remixes that works better than this model, so maybe download from there? Remix by NoWarrenty on Printables Additional features joinable with edge and corner connector pieces built-in screwholes comes with more sizes…
A theoretically simple but in practice quite complicated part to for connecting a TYT MD-UV390 (optionally plus) to a KlickFast style dock. This is a minimal approach to produce a small but secure alternative to a standard belt clip…
a mallard rogue for my dragonbane game remix from the adventure dragonbane mini makander and RN Estudios orwin
The clickfinity baseplates by James Boone are amazing https://www.printables.com/model/719455-gridfinity-clickfinity-baseplate-w-connectors , but they are not designed to be flushed with a vertical surface. (You might also want to…
A circle cutting jig to cut circles from 80 mm diameter to 300mm diameter (minus half the radius of the cutting tool). It has a adjustment slider to set the radius, and a split adjustment to allow for you to set the radius and move into…
Adding a cone like this to the center increases vortex action and cleaning efficiency. Similar concept to the commonly used funnel mod. Printed in PETG with 3 perimeters for strength, though printing in TPU would make for better…
To standardise all my equipment, I wanted my new Baofeng UV-5RH radio to have a Klickfast stud, so I fired up the 3d printer and printed out the Klickfast for Baofeng UV-5R by Hoopajoo on Thingiverse (…
I had some issues installing SKF bearings and mainly dust seals on my forks on triumph street triple 675r. I had created and printed some variation of some fork driver I downloaded to 41mm. But, after successfully installing the bearing,…
I created a two fictional or alternative types of models of Panzerjäger Tiger (P) Ferdinand (Sd.Kfz.184) mit Krupp Maus II Turm mit 150 mm Kampfwagenkanone KwK 44 L38 in size - scale 1:100 for model makers to the dioramats or like a model…
This is a replacement prop rod clip for a Rev Industries (OEM brand for BAKFlip) hard folding tonneau cover. It can be installed by slipping onto the end of the rail and sliding into place, or by snapping it on at the desired location. In…
Ich habe den ersten Druck in PLA gemacht. Ich denke, PETG wäre noch besser geeignet, aber bisher funktioniert es sehr gut mit PLA bei mir. Hält bei mir besser als das Original. Support: JA Infill: 15% Layerhigh: 0,2 Brim: Yes I did the…
This is a battery Cover for FlikFlak Watches for Children. Very small Part, but now works for over a year very well! ----------- Dies ist eine Batterieabdeckung für FlikFlak-Uhren für Kinder. Sehr kleines Teil, funktioniert aber jetzt…
My smile is full of blades. This is a Legendary Hunter sword sized and changed to fit in the hand of a dummy13 Print settings are 20% infill and print flat
Update 20240229: v6 is a significant rework, and I'm not actually certain I like it…but it does fix some issues with v2 and my prior use of mirroring bodies. Turns out that mirroring a body….mirrors it. So some elements of a body may no…
Did a renovation for an old Clodbuster and used a Blackfoot shell for this. As there is no proper interior available I designed a very simple interior to cover the cables and wiring and give it some more realistic touch. Some parts need…
Just a simple logo you can print and attach.
Scale 1:72 The model features a fully rotating turret mounted on a bearing for smooth movement, along with freely spinning wheels for added realism and playability. Assembly is simple and beginner-friendly: Glue the front and rear hull…
One of the cable release covers broke on my BakFlip Tonneau cover. This is a replacement for it.
Print with 3-4 Perimeters and ~50% Infill. Works without support materiel. Print instructions Category: Outdoor & Garden Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0,15 Infill: 50 Filament:…
Case and wall mount for the LuckFox PicoKVM. Has cut outs for all ports and buttons. Uses 2.5mm screws for lid (Tight). Depending on the screws you are using to mount the box, you may need to use/print washers.
Xol toolhead exx36 mount with pg7 strain relief and additional bottom screw to connect to the xol toolhead carriage
Geetech PLA Matte Grau Bambu Lab X1C Mit Supports
Simply print, attach a keyring/keys and click into a Klickfast dock Recommended Printing: 0.20mm layer height 100% infil Use normal supports (snug style works for me) Orient on short side with hole at top (see image) Use PETG, ABS, PC or…
KFC / Kentucky Fried Chicken logo in 3D. 5mm high.
A remix of yzfdmeier's Frankford Arsenal X-10 Case Feeder Shuttle Block . I cleaned up some details that improved the overall fit and finish. Also, added a maker's mark to differentiate mine from his. To use, push the case shuttle towards…
Meet Spike – The Official Punkfil Mascot We challenged the community to design a mascot worthy of representing Punkfil – Rat Rig’s signature filament brand. Out of several creative and high-quality submissions, one stood out. Spike ,…
I designed it for my son, it's fully printable in various colors. Give it a like if you liked it, just knowing that makes me happy. Hope you like it. Enjoy it.
I couldn't find a a chin mount for my o'neal backflip helmet so I designed this one. I secured it with a drop of hot glue for preventing it from shaking and two zip ties. Hope it's useful for you!
Habe zwei STLs eingestellt. Einmal das normale Logo und einmal mit dem Schriftzug "Pokalsieger 2018". Habe jede Ebene 3mm abgesetzt, falls man das ganze nach unten skalieren will oder muss - Außendurchmesser bei 100% ist 200mm. Somit kann…
You probably want to cut this model upinto pieces. Such can be done in programs like Meshmixer
LEGO Panzerwagen Sd kfz 247
I've had a MARKFROST lamp base sitting around in a box for years - it's a really pretty base but without any way to attach a shade it's a bit blinding just having a random lightbulb sticking up out of it. If you print this in vase mode,…
Instead of a handlebar bag, you can attach this drinks crate for 6 x 0.5 l cans to your KLICKfix mount. It is printed in one piece with the adapter plate, e.g. PETG Large enough for 6 beer cans, but also small enough for a standard…
Geetech PLA Matte Grau Bambu Lab X1C Mit Supports
This model is a base plate for Bosh GKF 550 router. It is designed to be as close as possible to match the original base plate mounting system. The stl file is large, that's why I also put the editable version. In the back, the hole must…
Sd.Kfz.8 Half-Track. All the pins and holes require some filing. The photo shows it towing a PaK 40 75mm. Most sources say it was used to tow a heavier gun. The new modified front axle 8, steps 9 and rear panel plug into the chassis A…
JCreateNZ --- I bought Bar Keeper's Friend but it didn't come with a lid, so I made one. Should fit both Barkeeper's friend cleanser and cookware cleaner & polish. If your printer is accurate it will snap on for a tight fit and seal (but…
