Liczymy pasujące modele…
https://paypal.me/radicalreel #2023 02 25 added another version Awesome (in my opinion) crown i designed for my sons Birthday. Make sure to measure the needed diameter and scale to the right size. This one is 160mm inner diameter.…
3D Printed Parts designed for the FPV Supply Co. Kronos Racing Frame.
Holds any plate/cup/bowl or other object on the table. Objects <25 mm thick can be stored in the side compartment. I use it for phones, remotes, chargers and snacks. Made two of these for my IKEA LANDSKRONA couch, however it should fit…
There are 2 versions of the bottle cap. V2 is a little more solid and grips better than V1. V2 MIGHT be a little too tight for small kids…but that also depends on your choice of material. Material used: Filatech FilaFlexible40, blue…
I made some modifications to SeafoamBoy's Ouro Kronii BEEGSmol model and converted it to STL to make it more 3D printer friendly. I uploaded 2 versions one is just a straight conversion of Kronii's head with a base and connecting support…
Update 28.07.2025 Recently change my printer and was now able to print a 7x7 plate. Added the lighweight with connectors model some seconds ago! Update 17.12.2024 Added model with connectors. Build the size you want or extend it! / Model…
If you’d like to get this model or explore even more of our work, including full figurine collections, exclusive designs, commercial licenses, and other great perks, you can find everything on our Patreon—see you there:…
TinyMtn Free Pack 15 - Ring of Fire This is a package with sets of 3D model files for four symmetric volcanic cones on the Ring of Fire. Mount Agung, 3031 m / 9944 ft Mt. Fuji, 3776 m / 12,388 ft Kronotskaya Sopka, 3528 m / 11,575 ft…
“Door Delete” for the Nerf Rival Kronos blaster. Replaces the loading door flap. Prints without supports (requires a 60degree overhang)
No shell cutting required, replaces the sliding doors at the bottom of the priming slide. Undo the four screws on the slide, pull out the doors, put in the T-pull, assemble again. Printing requires support for the tabs on the sides.
Straw Bale for Siku 1628 Krone Big Pack (1:87). Size: 18x14x8mm. Print with ‘fuzzy skin’ for a realistic surface. --- Strohballen für Siku 1628 Krone Ballenpresse (1:87). Größe: 18x14x8mm. Am besten mit ‘fuzzy skin’ drucken für eine…
Color: White / Champagne / Silk white Materiel: PLA / PLA+ Brim: Required, smooth sheet recommended (strong adhesion required for printing)
Spring Spacer for Nerf Kronos/Heracles/Mercury (identical internals) Increases spring compression for higher fps. around 15fps higher than stock for my blaster 7mm tall spacer. Highest that would still catch. Unlike most spacers, this one…
Es ist meine erste Konstruktion also wenn man Fehler findet, bitte nicht zu streng sein. 3MF vorhanden, mit 15% infill und höherer Lüfterleistung sollte es top werden. Vorsicht, die Dornen sind sehr spitz! Eine weitere Version mit…
This is a speed loader for the Nerf Rival Kronos. Similar to other speed loaders it holds 5 balls and allows quick loading of them all at once. This model has a sliding pusher to grab onto instead of having to use your fingers to touch…
Ideally you'll need a 30x30x35cm bed or larger, it can only just fit on my CR-10 bed. There are files for 20cm beds like Enders, but you'll need to join more pieces together and will have more seams and misalignment, depending on how good…
Der Halter wird unterhalb der Gabelkrone in das Loch gesteckt! Und die M5 Schraube, vorsichtig fest ziehen! Der große Konus, hat im losen Zustand ein Maß von 30 mm! und im gespannten Zustand 35 mm! die Gabelkrone muss vorher gemessen…
Dear makers, we would like to share our variable DIN holder for LSA KRONE terminal. This is a version for LSA Krone Terminals with curved holders like this:…
The cap caddy fits a Rubycon ZLH 470uf 35v and ELRS EP1 RX.
A simple replacement for a showers broken door handle. The particular shower is "Krone - Die Dusche" but due to it's simple design the handle should fit on every glas door which uses a threaded rod that doesn't exceed 4mm in diameter and…
Kronos Skull Model with Stand (optional) Collection: BadAssGodCollection (more in progress) Printed on: Prusa MK4 and Bambu P1S Material: PLA Scalable: Yes (I have uploaded a pre-sliced file at 50% size.) Supports: Yes (organic / plate…
Bottle Cap Treasury Introducing the Bottle Cap Treasury – your perfect companion for the fascinating world of bottle cap collecting! This storage box seamlessly blends appealing design with high functionality and has the capacity to house…
I have made a Nerf Rival Kronos Holster. I couldn't find one I liked so i gave one a try. This design can carry two speed loaders, of which you can find the files for here: https://www.thingiverse.com/thing:2826909 . I have updated the…
sido maske mit kronesido maske mit krone
Kroniky Avelu - tisknutelné žetony a figurky Jedná se o kompletní tisknutelnou sadu všech žetonů a figurek. Rozměry přesně odpovídají původním předlohám. Chronicles of Avel - printables tokens and meeples This set includes all tokens and…
No shell cutting required, replaces the sliding doors at the bottom of the priming slide. Undo the four screws on the slide, pull out the doors, put in the T-pull, assemble again. Printing requires support for the tabs on the sides.
Inlay für Kronkorken um einen 8x3mm Neodym Magnet wir z.B.hier: https://amzn.to/2FPV8sI anzubringen. Kann als Pinnwandmagnet oder für Kühlschränke verwendet werden ;) Print instructions Category: Organization Print Settings Printer Brand:…
This is an accessory for the awesome Kronoform Desktop Clock https://www.printables.com/model/962592-takara-mc-06-kronoform-the-desktop-clock by @MaxSterling. I modified the back half of the watch model to add new connector slots so I…
I used a cereal box for some thin cardboard and some matching felt. It was worn using some bobby pins to hold the hat on my head.
For the Arm and Lower Leg pieces, print two of each, then mirror the part and print two more each. Most slicer software should have that option available. The parts should print well in the orientation here, but do require supports for…
my print settings: Rafts - Brim: NO Supports: YES Nozzle: 0.6 Resolution: 0.28 Walls: 2 Infill: 5% Material: Brand: Eono Material: PLA Color: Black printed on Artillery Sidewinder X1
Dreikönigskuchen-Krone die noch selbständig verziert werden kann. Am besten die Enden mit Klebstreifen befestigen. Die Krone ist für Kinderköpfe gedacht ;)…
I've designed this turntable to fit on a standard 3/8" tripod mount. Used it on the Edelkrone Head One to shoot fotos for photogrammetry. Check out my YouTube Documentation about the process. Print instructions Category: Camera Print…
If you want to enable your Kronos to fire short darts but don't want to pay for a kit, this insert does the job. Plus, the modification is completely reversible and does not require permanent changes to your blaster. Only 3D printed parts…
Have fun with painting :)
A little fidget toy that can be printed in under 1 hour and my first published model. It can be spinned around or you can rotate the two halfs in one hand. The sound can definitely annoy your friends. I hope you like it
Schichthöhe 0,16mm Fülldichte 15% Füllmuster Bienenwabe Da ich mir ein Hydrometer zugelegt habe, beim Ace Pro es aber keine möglichkeit gab eines zu verbauen, habe ich kurzerhand mal eben einen Stand dafür erstellt. Der Stand ist zum…
English: This thing has a 100x15mm round ferrit-magnet inside. It's designed to catch bottlecaps falling down when using the wall-mounted bottle opener. It collects the bottlecaps - so it's a bottlecap collecting-point and has to look…
Többi koronázási ékszer - Other crown jewels: https://www.printables.com/@AveSavaria_3452552/collections/3682856 Az Erzsébet (Sissi) és Zita királnyék 1867-es és 1916-os koronázásán használt un. Habsburg "házi korona" 1:1 arányú…
This is a base for they Keykron k3 pro keyboard and a apple trackpad base
Game piece with a crown I have made for a friend. He is the king of „Mensch ärger dich nicht“, at least we let him believe ;-) To put in some weight, a 8mm nut is insert into the print. The stop command is already added to the provided…
The logo is not in he stl model. Modell ohne Logo. Material: Flexfill 98a
Plunger Head Shim for Nerf Kronos / Heracles (and possible other Kronos reshells) Place this shim on the plunger head underneath the O-ring for a tighter seal. Same concept as the oldschool teflon tape wrapping method to tighten seals;…
Hi, wenn ihr für ein Geschenk leere Glasflaschen wieder mit alten Kronkorken verschließen wollt, klappt das hiermit recht einfach. Das Innenleben braucht ihr 3 mal. Die drei Teile werden mit einem Gummiband zusammen gehalten und kommen…
This is a remix of the door for the Nerf Rival Kronos Speedloader v2 by mshurkr1. I was having issues with the pin hole and the speedloader hole both being too small while everything else was perfectly fine. Now yes, I could have just…
USE AT YOUR OWN RISK!!! I made this when I was new to CAD design and did not have 3D printer of my own. PLEASE USE SOMEONE ELSES DESIGN THAT WORKS... WARNING: Its a little too large, as in the HIRs are loose inside... I will update this…
This is a rival rail that glues onto the bottom of nerf kronos. It is easy to print and simple to put together. There is a One piece version and a 2 piece version(the 2-piece takes less supports). Before you glue on make sure you cut any…
Just a virion model with a hook. **Print will full support and 3 perimeters**, otherwise spike proteins will fall off :)
SMA Mount without distance: closer to the frame Kronos SMA v3: Has enough space to fit a little receiver behind the stack.
This Kronos Ghost Door is A replacement internal magazine through-hole loading door, allowing for faster and easier reloading of your Nerf Rival Kronos blaster. The Kronos stock door does nothing but get in the way, and this provides a…
Very basic tubes made for Norwegian coins (Krone) with push-fit caps printed in vase mode. I had a bunch of coins stored in a jar that I wanted to sort and put away in storage and came up with this basic design for quick printing and no…
Micro antenna holder for the Kronos racing frame, added fin to help with turtle mode. Also looks really cool :D
Cam mount for Kronos frame - cam Hdzero micro V2
Abdeckungen für Flaschen mit Kronkorken mit Zahlen von 1 bis 24. Damit läßt sich prima ein Adventskalender erstellen. Die Zahlen sind in der Konstruktion 0.1mm erhöht sodass sie sich im Slicer gut einfärben lassen. Diese Erhöhung ist nach…
This is a front plate for a Nerf Kronos designed to be printed in two colors. It also has room for a 6 shot follower. You can either use a dual extrusion printer or print it in two separate pieces and glue it together. You will also need…
A protection plate for your electronics of the kronos frame :)
Ich habe einen kleinen Ersatz für den Bruder Krone Swadron konstruiert; Leider gehen die Räder sehr leicht kaputt und so habe ich hier den perfekten Ersatz für euch. Ich habe zwei Versionen für euch erstellt. Zusammengebaut, was natürlich…
I wanted an inexpensive optic for my Nerf Rival Kronos. The Daisy Electronic Red Dot Point Sight (https://www.amazon.com/gp/product/B000N8KHQG/) fits the bill, but the bracket doesn't fit on the Nerf Rival Kronos' rail. The model is…
Plate can be used to mark KRONE LSA plints with custom labels
This part is a holder for placing the “Krontaler” thermo-hygrometer inside an enclosure or a filament storage box. By the way, this ALDI-hygrometer can measure humidity from 20%, unlike some other models which start measuring only from…
This is a remix of the Nerf Kronos trigger by beardland . It has been split in half to make it easier to print, and also some aesthetic holes were added so it more closely matches the original trigger. Design on Onshape Print Settings…
This is an easy fix for the Nerf Kronos that fixes the issue when you remove the jam door and are left without the rod shaking back-and-forth. This piece keeps the rod in place and creates the breech to be a perfect square.
Clamp that fits a Ikea Havstorp kitchencabinet door for trashbin made bij @DrKronos
A swedish 10-krona for our shopping carts in sweden Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: PLA PLA PLA Category: Household
The coat of arms of Sweden and the symbol of Stockholm. While not necessary, I decided to change out filament quite a lot to get the right colors: blue, white, yellow, then white again. Print instructions Unassociated tags: iPhone 6,…
Nekron is the Lord of the Unliving, one of the most powerful forces in the universe, able to summon the dead to serve him towards whatever ends he might seek. Nekron is a physical manifestation of the concept of death as a cosmic…
Fully compatible with magnets position to my remix here: compartment stand off needs to be printed in mirrored and non-mirrored version other parts 1x each I was not able to fil all to original box. Insert for this extension will lift top…
Halter für Kronkorken, Schlüssel oder andere Dinge, welche magnetisch sind. Schöne Deko für den Kühlschrank. Als Magnete habe ich Magnetkugeln mit 10mm Durchmesser genommen, welche im Netz für kleines Geld zu bekommen sind. Diese sind…
Bei Elektroinstallationen im Trockenbau hat mich der feine Rigipsstaub beim Bohren von Hohlwanddosen immer gestört. Deshalb habe ich diese einfache Bohrabsaugung konstruiert, die direkt an einen Staubsauger angeschlossen wird und den…
Kronos Bust is a detailed 3D printable statue inspired by Kronos , the mighty Titan ruler associated with time, harvest and the age before the Olympian gods. The model features Kronos holding a large sickle , with a regal crown, flowing…
you need 6-32 1-½ phillaps head screws and bolts
goldene sido maske mit der krone Golden skull with crown. Category: Music
Die Schraube welche benötigt wird um Fronten bei älteren Eckschränken einzustellen. gedruckt mit 50% Füllung, 0,16 und 3 Wandlinien.
Fin for the fpvsupply co Kronos frame that holds a micro axii v2 and has a notch for an rx antenna. Printed without supports and 15% infill. V2 has thinner support struts than the strong version. Remixed the micro axii v2 off the TT.
Hockey pucks with Team Sweden logo. Logo protruding, another in engraved style. Side knurled pattern versions also available. Enjoy! Check out other pucks in my collection: https://www.printables.com/@m_collectable/collections/2703845
Dieser Halter ist für Kronkorken gedacht (Biedeckel) wir benutzen ihn für Gummideckel die zum Schutz der Flaschen sind vor Wespen Bienen oder anderen Tieren.
Scorpion EVO Ontos but shorter. Hits ~125 with 21cm worker barrel and the weakest OOD seagull spring. https://outofdarts.com/products/worker-threaded-breech-barrels https://outofdarts.com/products/worker-seagull-tuning-upgrade-springs…
Perfect fitting clips (1 mm) to insert in the cutouts of the Clockface for a better reading .
Top plate for the Kronos. Can be used for modeling any add ons or printed to test fit add ons.
This is designed to be fitted over 1 3/4 inch PVC and the exposed magazine. The slots take 1/8" by 3/4" aluminum fat bars. The holes that fasten the bars are designed to take M3 screws, but can be bored out to take larger screws.…
With this part you can fix the RC of your Dronavia Kronos MVC3 kit on the back of your DJI Mavic 3 Pro remote (model : RM330) Way less fragile than their fixation on the USB port. You only need 2 M2x5mm (M2x3 or M2x4 work as well). I…
Since Titla doesnt make a holder or box for their filter set as part of their Kronos iPhone system, I thought Id go ahead and just make one. Nice snug fit. PLA Infill 100% Printed on an Anycubic Kobra 2 Pro. (My Prusa was busy)
USE AT YOUR OWN RISK!!! I made this when I was new to CAD design and did not have 3D printer of my own. PLEASE USE SOMEONE ELSES DESIGN THAT WORKS... WARNING: Its a little too large, as in the HIRs are loose inside... I will update this…
Stack Base 3d print which lets you mount the ESC without using gummies. Protects against shorts on the frame inserts. Prints without supports good enough for the use case, which isn't visible on an assembled drone. Not tight enough to…
My settings: Layer 0.4mm Infill 100% Ill be happy if you share your print and rate it in the comment section :)
I needed to use my Dronavia Kronos MV3 parachute on multiple drone so remade the holder from the original provided with the kit Printed in Prusa PETG Carbon I strongly advise printing sideways with supports. You do not want supports in…
Old Akron University logo from the 90s. Turn on Ironing for a better top layer GIANTARM Matte PLA (Matte Navy Blue) SUNLU PLA (Pure Yellow)
Printed with: 4 walls. 4 top/bottom layers. Min 70% infill. This is for higher weight of the model. Please give a like and/or comment if you like it.
Gridfinity 5x1x6u for krone pushdown tool.
Very soon after starting to use the Dronavia Kronos MVC3 kit, the button on the parachute broke so I designed this part as a replacement. I tested it with Fiberlogy Fiberflex 40D without support and it worked great.
New top plate for the Kronos Alpha frame. I slightly modified the width to give better coverage to the electronics and widened the inner cutouts a bit for ventilation. It's designed in 2mm, but you can use it for 2mm or 3mm carbon fiber…
Hier kommen noch Werkstatt Tips, wie man Reibahlen handhabt, denn eine geriebene geometrisch exakte Bohrung macht den Rotorwechsel/Wartung erheblich leichter…
Our Kronos fingerprint sensors would often become detached due to the bezel design. This is a suitable replacement
STL Datei: Rotor_Ultimate_Bearing608TEW2022BVW8M6M3Stufensitz22_06mm
