1341 modeli
RC model tanku KV-1 v měřítku 1:10. Předloha je typ vyráběný v červnu 1941. Model má ovládaný pohon, otáčení věže, náměr a zákluz. Veškeré podklady pro stavbu jsou v návodu. Několik hotových je k vidění na…
Description; Halo Mk V Armor from Halo Infinite (ripped from in-game) adapted to an action figure using my MODULYR V2 action figure template. This is a 6 inch scale figure, with 22 points of articulation. It comes with a colored visor…
Hey all! If you're here, you probably want a cool mounting solution for your JetKVM into a 1U rackmount form factor. You're in luck! Below I've outlined options for both fully 3D-printed solutions, as well as hybrid solutions utilizing…
Věž MT-2 pro model tanku KV-2. Podvozek je celý použit z modelu KV-1 https://www.printables.com/cs/model/219806-tank-kv-1-rc-model-110 Veškeré info ke stavbě je v návodu. Zde odkaz na kolegou postavený prototyp:…
We created this little duffle bag buckle for individual use. Holds very stable and tight. Watch the video! https://www.youtube.com/shorts/DLxIzBYfSyA You can print it, scale it, whatever… The standard size is designed for 25mm wide straps…
1:40 Scale Modeled in Fusion 360 Modeled in 4 hours
A 10-inch rack mount for the JetKVM. I made this model in 3 variants. For 1, 2 or 3 JetKVMs. Each variant also has versions with keystone slots. A huge shout-out to JaredC01 for the original mount, which I used as a base for mine. His…
Konverzní sada pro přestavbu modelu tanku KV-1 na verzi KV-1E. Základní verze KV-1 zde: https://www.printables.com/cs/model/219806-tank-kv-1-rc-model-110 Veškeré info pro stavbu najdete v návodu.
The housing consists of two parts. The cap is snap-in. The HDMI and USB-C ports are easily accessible and not recessed into the housing. The housing has a cutout that allows access to the microSD card without disassembly and holes for…
Budget PiKVM Enclosure (Raspberry Pi Zero 2W + OLED) This is a custom-designed, two-part enclosure built specifically for a budget-friendly PiKVM setup. It neatly houses all the essential components for a compact, remote PC management…
Intro: These are adapters to mount the Simagic P-HPR (Haptic Pedals Reactor) for the Heusinkveld Sprint Pedals . All 3 pedals (clutch, brake, accelerator) are included. Models: You will notice that there are 2 models per pedal, labeled…
Geekvape Aegis legend 2 510 connector repair
This model is a detailed, scale reproduction of the Y25 single-circuit 400 kV high-voltage tension pylon , an essential component of high-voltage electrical grids. The design is based on a precision 3D photogrammetry scan taken in the…
The parts are separated so that the model's printable Also the machinegun barrels are removed for obvious reasons, sorry!
Das ist ein Unterdruckventil für einen Zyklonabscheider. Es kann mit Hilfe der Feder eingestellt werden und verhindert das implodieren eures Sammelfasses. This is a vacuum valve for a cyclone separator. It can be adjusted by means of the…
This is a very simple model of the Russian cruiser " Moskva " with an artistic impression of the hull damage she sustained before her sinking on the 14th of April 2022 . Printing Nothing special. Both models have slight overhangs but…
Found this online thought was funny and came out really clean so thought would share, link to the creator and other models here. https://cults3d.com/en/users/MPPrints/3d-models
Nie je to len ozdoba do vlasov, je to najsilnejší ochranný amulet, má liečivé účinky, je to zároveň najstarší symbol používaný na našej planéte. Je to vzorec, podľa ktorého bol stvorený svet. Tlačené z materiálu Silk Gold na zrnitej…
Další dekorační váza z mé dílny, tentokráte lze dovnitř nalít vodu a dát živou květinu. Another decorative vase from my workshop, this time you can pour water inside and put a live flower. Print instructions filament PLA 0.1mm detail…
The Victorinox SwissTool Spirit X is - imho - perfect. Except for the missing tweezers and toothpick - a fix. PS: FreeCAD source file included. Category: Containers
Tankdeckel für folgende Stihl Motorsägen: MS:020,021,023,024,025,026,034,036,038 Die Dichtung sollte mit einem Weichen TPU hergestellt werden um gut abzudichten. Nutze A70 Shore TPU. Empfohlenes Material ist ABS bzw. ASA um die nötige…
Tiny Tank – KV-2 1:200 scale model Easy to assemble – the turret clicks onto the hull and can rotate. Just glue the tracks and back part to the main body. To scale a model from 1:200 to 1:144, you need to use a scaling factor of 138.8% in…
This model is inspired by https://www.thingiverse.com/thing:4950281 Case for a PiKVM ( https://pikvm.org/ ) with following equipment: Raspberry Pi 4 HDMI to CSI-2 bridge based on TC358743 https://de.aliexpress.com/item/400010 USB-C/PWR…
This comes in handy when the knob of your water cut off valve (German: Eckventil) from the company Scheel breaks and turns wild without closing or opening the valve. Fits a 4,7mm x 4,7mm rectangles on the valve that is ~13mm tall. To get…
Hikvision protective shield for KV6103/6113 series villa door station.
This is an HO Scale (1:87) model that I made to fit in a shadow box for a nostalgic display of a recently closed down local landmark. Mels' Tea Room www.historicplaces.ca Mel’s Tea Room is a distinctive brick and stone landmark on Bridge…
Tištěno na tiskárně Prusa I3 MK0 - 3mmABS
Additional parts needed: 4 M3x12mm screws (a little bit shorter or longer should also work) Print the mount and 2x each washer. Use 3 perimeters and 25% infill. Then mount the reactor the mount first with the included M4 screws. After…
2parts, held together by four M3 10mm screws and nuts. no supports needed. OpenSCAD source available. New : Optional top that houses 4x4x4mm NdFeB magnets. Even half-populated it will stick to any metal case (just be aware of magnetic…
Simple enclosure for the Silpeed NanoKVM-Lite. I printed with no top or bottom layers and 30% hexagon infill for additional airflow. No supports needed. Made in FreeCAD 1.0rc2, source file encluded so feel free to mod it to your liking.
A small case for Raspberry Pi Zero 2 W mainly designed for PiKVM variants with covered GPIO and CSI slots or open HDMI to CSI-2 bridge: https://www.aliexpress.com/item/4000152180240.html CSI case: 1x piKVM_-_rpi.stl or…
This is another version of the anti-tip feet for the popular IKEA learning tower, consisting of "oddvar" and "bekväm". The feet do not raise the tower, so no additional feet are required for the two rear chair legs. I tried to create a…
This is another model from my Vapor's World collection . Protection for Geekvape Zeus Subohm Tank. If the mod accidentally tips over, there is a high risk that the glass tank will break. This protection prevents that. No support required.…
Everything printable at 0.2mm layer height, you can upscale the model if you want, but i advise to not downscale due to the fact, that it will lose a lot of detail and some supports are already quite hard to remove. Turret is fully…
Replacement for the clip to the slider in the IKEA Kvartal system (not longer produced by IKEA). Latest Update: 2022 Feb: Additional tweaks to increase stability Print instructions Material: PLA or PETG Layerheight: 0.15 mm Nozzle: A…
The NVR is shifted forward for about 60mm, suitable for shallow rack cabinets where there's not enough depth the height is also slightly higher than 1U because it holds the NVR from the bottom, not a problem if you leave a bit of space…
This is another model from my Vapor's World collection . The stand prevents accidental tipping of the mod. No support required. I am looking forward to your Makes! :-) If you like this model, feel free to check out my others here .
Tiny Tank – KV-1 1:200 scale model Easy to assemble – the turret clicks onto the hull and can rotate. Comes in three versions: KV-1s KV-1b To scale a model from 1:200 to 1:144, you need to use a scaling factor of 138.8% in the slicer An…
Remix with minor fixes to NewProggie's JetKVM mount with 8 keystone modules.
Tlumič hluku přepadu pro mořská i sladkovodní akvária. Model je navržen pro maximálně jednoduchý tisk bez podpěr. Montáž je rychlá a intuitivní – stačí složit a nasadit na přepadovou trubku. Ověřeno dlouholetým provozem. Hlavní výhody:…
A beautiful minimalist painting of a Spring flowers on the wall, with a stand on the table or window easter decoration. Size 156 x 200 mm You can find the small print stand for the table on my profile ↓…
A Tank replacement for the Geekvape made out of PETG. I"m using it for a year now. depending on your printer you might scale it in Z achsis about 1% or so. the fiddeling between its to large, and you don't get it in, and its to loose and…
An Soviet tank from the youtube channel gerand and it took forever to download my design :)
Case for the dev board for the Kria KV260. Source Files OpenSCAD file included. The source files depend on BOSL2 . The design is parametrized to modifications of parameter. For more intricate modifications, it is advised to use the cad…
You may need to heat up the camera mounts so you can bend it to make the camera fit easier. A little late to mention but the camera mounts fit my 160 FOV cameras, its a tight fit, I'm not sure of the compatibility with 130 FOV cameras.
Bracket for mounting Hikvision doorbell camera with 45 degree angle, intended to be mounted in a corner. Can be mounted left or right. Print settings: 0.2mm layers, 20% infill. I printed in silver PLA to (roughly) match the camera's…
lost my tip and made a new one so you don't have to. best on a resin printer but probably print on any style printer. you will need o-rings for the base it is designed for them like the original. all files included so you can mod it as…
Original model from thingiverse: https://www.thingiverse.com/thing:3493230
This is a custom-designed protective case for the Sipeed NanoKVM Lite, an open-source KVM switch that allows you to control multiple computers with a single keyboard and mouse. The case is designed to provide both protection and…
Simple hook (in four lengths from 10 - 40 mm) for the holes of the IKEA Elvarli connecting post/pillar. Simply hang in the hole and if desired firmly fix with the safety clip. Thus, unintentional sliding out is no longer possible and the…
A Drip Tip for the Geekvape Zeus Atomizer Print Settings Printer: Creality Ender 3 Rafts: No Supports: No Resolution: 0,1-0,2 Infill: min Notes: Print upside Down to avoid using Support Category: Other
You can use it as a vase, pen holder or flower pot. Print instructions Use a vase mode. :)
První model co jsem zkusil. Chyběla miska pod květináč, tak tady je :) Ale hodit se může na cokoliv. Základna průměr 14 cm, vnitřní průměr 13,5 cm My first model, bowl under the flowerpot. Base 14 cm, inner diameter 13,5 cm. Enjoy
From the pdo file to obj and then to stl. The scale is 1:8 always for my diorama. Original size is 610 x 488 x 184 mm. Picture is from the website of George Hull. You can print it with supports. Edit: There is a problem with some layers,…
A modular, 2-part, 19-inch rack mount for the JetKVM. I made this model in 2 variants. For 2, 3 or 4 JetKVMs per module. The 2 and 3 KVM variants also has versions with keystone slots. This mount is part of a 19-inch modular rack mount…
Both In is for having both ethernet and the IO behind the rack ear. I use this configuration to mount the NanoKVM to the back of a rack and use keystones to pass through all the IO and Ethernet through my patch panel. Eth Out is for…
Eckverbinder für 2020 Aluprofile mit einer Wandstärke von 3mm und 4mm für M5 bis M3 Schrauben. Löcher sind in 5,2mm, 4,2mm und 3,2mm Durchmesser Cornerbrackets for 2020 Aluminiumextrusions in 3mm and 4 mm thickness for M5 to M3 Screws…
(English see below) Diesen einfache Eckverbinder kann man in Fusion 360 so anpassen, dass er zu unterschiedlichen Kabelkanälen passt. Dazu gibt man in Fusion 360 (Datei „ Kabelkanaleckparametrisch v2.f3d “) unter dem Menüpunkt "ändern"…
Pro majitele HIKVision kamer, domeček pro montáž kamery na stěnu nebo do podbití, pokud vám kouká ze zdi/podbití už RJ45 koncovka.
This is another model from my Vapor's World collection . This belt holder for Geekvape Aegis Legend 2 is a practical solution for hands-free convenience while keeping your vape device secure and close at hand. Fits belts up to 40mm wide…
I did some quick modelling while waiting for the JetKVM Kickstarter campaign to end. Using their provided JetKVM 3D Model , I designed this under desk mount that might come useful for someone using their JetKVM at their workstation for…
aquarium scraper škrabka na akvárium my Print : layer 0,15 infill 100 %
There's a hole in this Benchy. PLA Pro .2 Layer height Supports required If you like, like. Peace
Eckverbindungen für Konstruktionslatten 24mm x 48mm Größe: 80mm x 82mm x 55,5 mm (BxLxH) Jeweils eine Rechte und eine Linke Eckverbindung
If you are looking for a vacuum valve to be installed directly in your 50mm (DN50) pipe installation you might find this thing very helpful. As an example if you use one of those cyclone dust separaters and fear that your holding tank…
An emergency mask for EMS and hospitals that can utilize a 3m bayonet style filter or a cloth filter. The modifications have a 'bulb' around the rim to accept a 1/4" or 3/8" i.d. rubber tube. This print will seal better than an N95 mask…
Attaches to the nut on the top bolts for each pedal. These attach using the screws that come with the TT25. Print in the orientation they are saved in and use supports. Recommend you print with enough walls that the mount part for the…
There seemed to be no free Simagic HPR adapters for the Heusinkveld Ultimate+ pedals, so I made my own. One model for brake and throttle, separate model for clutch. Designed for M5 Ruthex inserts . Run a long M5 screw through the part…
Simple case for PiKVM ( https://pikvm.org ) based on Raspberry Pi Zero 2 W. Components used: Raspberry Pi Zero 2 W. CSI-to-HDMI converter / adapter based on TC358743. I'm using the module with green PCB labeled “C779”. Different modules…
Print Settings Printer brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Layer Infill: 30% Filament brand: Generic Filament material: PLA
General notes about the model This is an adapter for mounting a Dayton Audio TT-25 “puck” bass shaker to the back of Heusinkveld Ultimate Plus pedals. It should work on any of the pedals, but I only tried the accelerator and brake. The…
Model of the German 20mm Flak 38 anti-aircraft gun. Easy to make model, printed entirely in PLA in layers of 0.10 and 0.15 The model can be displayed alone or in a version transported via a special trolley from the Opel Blitz link below…
Rechtwinklige Verbindung von bis zu 3 Aluminiumprofil 20x20 Nut 5 I-Typ Right-angled connection of up to 3 aluminum prof Passend für Aluminiumprofil 20x20 Nut 5 I-Typ für ISO 7380-1 M5 Halbrundkopfschraube Suitable for aluminum profile…
Needed to design a custom Junction Box for a Hikvision dome camera DS-2CD2145FWD-I(s). Came up with a simple design of a Junction box with a threaded inner side and a corresponding mounting plate for the camera with an outer thread.…
A beautiful minimalist painting of a easter bunny and flowers on the wall, with a stand on the table or window decoration Size 146 x 200 mm You can find the small print stand for the table on my profile ↓…
Fender cover for universal e-scooter holder by https://www.facebook.com/djkvido This model extend cover area in compare with original one. To buy this universal aluminum fender holder, ask https://www.facebook.com/djkvido PRINT: I used…
Zápich do květináče - Velikonoční zajíc. Topper as Easter Bunny.
Hp prodesk 10" panel rework to add a JetKVM next to it. I really wanted to fit the screen flat. because why have it at a angle? The JetKVM is to be disambled to fit, but the screws from the case can be reused in this print. the screen…
výška - 10cm šířka - 6cm hloubka - 5,5cm
Case and wall mount for the LuckFox PicoKVM. Has cut outs for all ports and buttons. Uses 2.5mm screws for lid (Tight). Depending on the screws you are using to mount the box, you may need to use/print washers.
Thanks to Redstar over at the Mandalor Mercs Costume Club for releasing this very cool concept helmet in pepakura .PDO. I have converted the PDO to STL and added a couple of tweaks. I have included a short video on one part of the process…
Wall mount for Hikvision doorbell DK-KV8x13, 45 deg. You need four M3 brass heat insert nuts.
Eckverbinder für Gehäuse mit 5mm Plexiglas... M4 Senkkopfschrauben Corner Panel Joints for Housing with 5mm Perspex
Remix of JaredC01 original JetKVM mount with 8 additional keystone modules suitable for a 10 inch rack
Camera and LED mounts for the Quest 2 for use with the EyeTrackVR project to add eye tracking! Print in PETG for best results, PLA is fine. Both general/V3 LED and V4 LED mounts are included.
Miska pod květináč / Bowl under the flower pot Vnitřní rozměry misek jsou 50 mm, 90 mm a 120 mm. Jsou zde 2 varianty. Jedna se středovým křížem a druhá bez něj. Ať se Vám modely líbí a budu rád za ukázky vašich výtisků.
Systemprofil-Eckverbinder für Aluminuim-Systemprofile der Abmessung 20mm x 20mm. in das Loch in der Mitte des Alu-Profils (4,3mm) muss ein M5 Gewinde geschnitten werden. Die drei Alu-Profile werden mit M5x16 Senkkopfschrauben an dem…
Link to the Fusion file: https://a360.co/40vNwG4 Inserts are ruthex m3s, if you have insert that dont fit the holes, text me and i change it. Instructions for assembly over on Jareds post Slots are for velcro cable ties
Assuming you're using the same (Geekworm X630) HDMI-CSI bridge (…
A beautiful minimalist painting of a Lotus flower on the wall or with a stand on the table. Size 200 x 175 mm You can find the small print stand for the table on my profile ↓…
Ugreen KVM Under Desk Mount. Print this with supports on the sections which extend out. Specific Model : UGREEN 8K Displayport KVM Switch DP 1.4 with 4 USB 3.0 Ports (3 USB-A + 1 USB-C) Support 8K@60Hz 4K@240Hz Share 1 Monitor Keyboard…
Praktischer Verbinder für Maker Beam, Kanthölzer und Rohre. Für SLS-Druck optimiert.
JetKVM 1U Rackmount Remix for 10" Racks – Built for EZCOO KVM Integration Meet the JetKVM-KVM — a clean, compact solution for managing up to four systems with a single JetKVM and a KVM switch. Designed to fit 10" racks, this custom 1U…
Just some small tweaks to these incredible adapters to make for easier printing and assembly. Printed in Jessie Elixir PLA on a MK4S.
Angle mount for Hikvision camera (DS-2CD2343) to roof beam (100mm base width). Camera outer diameter 127,3mm, 25° angle. Printed with 3 wall loops, 5% gyroid infill.
Wasser Eckventil Ersatzrad wenn Ihr andere 4 Kantmasse benötigt schreibt mich bitte an. Sollte in ABS mit 60% Füllung gedruckt werden. geht wahrscheinlich auch mit PETG..
https://www.thingiverse.com/thing:6056548
I wanted something a bit more compact for my cameras at my property. The cat5 goes right through the back of this box in through the wall. There's three screw holes for recessing screw to anchor. I added 8-32 screw fittings to hold the…
