689 modeli
This is one of the sample objects bundled with the Original Prusa SL1 3D printer designed to test whether your printer works correctly. Model by Michal Fanta, used with permission
This is one of the sample objects bundled with the Original Prusa SL1 3D printer designed to test whether your printer works correctly. Print instructions Complete guide, how to do SL1 resin calibration Model by Michal Fanta, used with…
The Wio Tracker L1 Series is a low-power, scalable Meshtastic node featuring LoRa (862–930 MHz), an nRF52840 for efficient processing, and an L76K GPS for precise location tracking. The L1 Pro version is a fully integrated,…
This is one of the sample objects bundled with the Original Prusa SL1S SPEED 3D printer designed to test whether your printer works correctly. Model by Michal Fanta, used with permission
The professionally designed travel/storage case for the Henson AL13 safety razor is a sleek and innovative solution for safely transporting and storing your razor and blades. Designed with precision and attention to detail, this…
The calibration test object for resin 3D printers. Print instructions Printable without supports.
Works with both Prusa SL1 and SL1S Speed printer. The Prusa SL1/S Speed Drip Adapter holds the build platform at an angle to allow excess resin dripping of the platform and model. The fixture is rigid and frees up both hands to release…
Printable files for the objects from the resin sample print box . See the link above for more info about the actual sample prints.
This is a custom case for the Wio Tracker L1 E-ink kit from Seeedstudio . The e-ink display that comes with the board is somewhat large but I tried to get the enclosure as pocket-able as possible. I uploaded two versions of the front with…
This is a replica model for Mercedes Roadster 1960 (WIP). I'm not sure if it is possible to connect pins & tires to main since the body has fender skirt. Please feedback. update01 : I've added main body parts one by one for remix editors.…
This is a case for the Wio Tracker L1 from Seeed Studio which can fit the Meshnology 3000mah 755060 battery. Makes a good standalone Meshtastic device with the new firmware which has the virtual keyboard. Update 6/12/2026: Added step…
Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini with an VL53L1X / TOF400C sensor and keep the whole thing as small and modular as possible. Later on, the project will be used with ESPHome and…
Update 02.07.2024 - V3 Model with no blinkers. I saw that there were a couple of request regarding a model with no blinkers, new model added ;) Update 28.06.2024 - V3 model released! Updated the design so its easier to install the lid.…
1 & 2 Nikon EN-EL15 Battery Protection Case
A holder for the WAGO221 with labels L1, L2, L3, N, and PE. The holder mounts with M5 screws. An additional model of the holder is available without labels. The Wago fits snugly, requiring a slight pry to remove. I printed at a 0.16mm…
Wall mount bracket for the Bosch 18V charger model AL1830CV. Print it on its side to ensure it is more flexible and durable. PETG is better for this use case, but PLA should be good enough.
Similar to the stock case with the following changes Optimized for FDM printing cover prints facedown with no supports longer body with room for 3000mah battery requires 2mm heat set thread inserts added place for 2.5mm heat set thread…
Battery Cover For Nikon EN-EL15 Motivation For some reason I tend to lose the battery covers of my EN-EL15 Batteries. Therefore I designed a replacement. It was also a Test for printing with (semi-) flexible material on my i3 MK3. In the…
Double-sided mechanical curved switching track compatible with BRIO and IKEA wooden rails. Printable in place without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini…
These are flat replacement L1 and R1 buttons for the first gen PS4 controller (CUH-ZCT1). The buttons are not modeled to be exact replacements, they are flat and chamfered on the front, both as I wanted something that was a bit nicer to…
Description: Welcome to my 3D model of a Makita 18V Battery Pack Holder, tailored specifically for the Makita BL1860B v2 battery! This model has been meticulously designed to offer a perfect replica for those who need an extra holder or…
Simple blade guard that slips over your Henson AL13 safety razor so you can throw it in you dopp kit (toiletry bag) without worrying about inadvertently cutting things or damaging the blade. There are drain holes in the bottom to keep…
Printable parts for your SL1S SPEED printer. Print instructions PrusaSlicer's default PETG 0.2mm presets. For the CENTERING PIN SL1S_SLA part, we recommend printing it with Prusament tough resin.
Model Blaniku L13 - NElítá Model of L13 Blanik - no flight
A simple stand for the Henson Shaving AL13 safety razor with a spot for a pack of blades and a sharps disposal box; which can be found here: https://www.printables.com/model/779604-safety-razor-blades-sharps-disposal-box I will probably…
This is a simple model of an 81mm Mortar, L16. Prints fairly well in a larger size with FDM, not much needed in the way of supports. Enjoy Category: Props
I didn't have a travel case for my AL13, and there were only some around that I weren't fully happy with, so I thought, Why not design and print one myself :D ? This model is print-in-place, as I wanted to try it to improve my skills.…
Adapter mount for Surefire HL1 helmet lights. Current screw holes are configured for Ops-Core ARC Wing-Loc rail adapter (20-98-103) but use the .step file to adjust hole size and position to suit your mounting requirements. Tolerances in…
Make sure that after printing the holes in the joystick and back button are cleaned up so they sit properly. https://youtu.be/DMV8aHCts8Q
All printable parts for your Original Prusa SL1 resin printer. The SL1-IR_HOLDER_SHEET comes pre-installed on the optical sensor . Files are also available on Prusa3D Github , including the not user-replaceable parts. Print instructions…
a battery holder for nikon en-el15 batteries
Introducing the Actuator priming foregrip! This grip was designed to fit flush on the priming block of the SBL1, but should work as a priming grip or foregrip for many other blasters with picatinny bottom rails. This grip should print…
The Henson AL13 is a great razor, but it does not come with any kind of protective cover. The blade remains exposed, so can easily be damaged when stored, especially in a bag with other toiletries. Similarly, leaving the blade exposed…
Simple cover for your Prusa SL1 tank protecting resin and display from damage. Fits between tank screws, without removing them. The cover is easy to keep clean and protects the resin from UV-light is printed in a black filament. Looking…
These clips are ment for the Ortlieb panniers with the QL1 / QL2 klick system. https://www.ortlieb.com/de_en/ql1-ql2-hook-inserts The originale ones come in the sizes 8mm and 11mm to fit the Bike rack. These here are designed for Bike…
A compact, detailed model of the L1 lumbar vertebra , designed as a small anatomy reference or unique medical-themed keychain. This model balances recognizable anatomical features with clean, support-free printing, making it ideal for…
Ключ нарисован, потому что потерялся комплектный, а покупать, это надо идти и искать незнамо где. Особенно, Москва - это “место где всё есть”. / The key is drawn, because the complete key is lost, but to buy it, you have to go and look…
Here are all of the 3D Printed parts that come stock on the 45Drives HL15 server. If you need spares, or want to print your own, go to town. We recommend using PETG with at least 20% infill for these parts. PLA will likely soften at…
Easy to print shroud for NH-L12s to improve exhausting hot air OUT of the case. Print in ABS/ASA or other heat resistant material. Requires spacer under power supply cable in order to fit, for example THIS (tested). 2025/02/14 - I've…
Commercial Use and Attribution Notice MeshPack © 2025 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale, is permitted under…
Protect your precious Nikon batteries with this simple and “snappy” case! Printing Use the standard print settings in your favourite slicer. Make shure that “Minimum travel after retraction” (Prusa-Slicer) is set to 1 or lower I used eSun…
can be printed in PLA or PETG with 0.2mm layer height profile 2 or 3 perimeters. Make sure you use soap for robot cleaners. Follow the instructions in the pictures. I used my finger nail to remove the cap only the first time is difficult.…
Update: Version 3 uploaded. For user request I have added 2 more screws at the arms to base connection, and enforced a little bit the arms. Setting the nuts in the slot for the lower screw will need patient.:) I have not printed this…
Simple cover for your Prusa SL1S Speed tank protecting resin and display from damage. Fits between tank screws, without removing them. The cover is easy to keep clean and protects the resin from UV-light is printed in a black filament.…
made chest wider, so shoulders are wider for that superhero look.
CL1P is a minimalist filament clip designed to stay completely inside the spool without sticking out. Many filament clips extend beyond the spool and get in the way — this is exactly what CL1P avoids. With a material usage of only ~0.3 g…
The Original Filament Pelletizer PEL1.1 is a commercially certified complete kit from ARTME 3D ® . The kit comes with all the necessary components; only the 3D-printed parts need to be printed by the user. You can buy the necessary metal…
Modified the great case designed by zeropt to fit a 3000mAh Makerfocus battery (65x35x10mm). A M3x14mm screw is needed. I had no Onshape experience and I needed some time to figure it out and to appreciate the great design of zeropt.
This is a useful battery holder 3mf file that utilizes a dummy battery stl from wdwhite and a gridfinity 2x1 template by Zach Freedman I used it to clear up a stack I had. These are not stackable at the moment It's noted in the part…
A simple tool to help you 1. verify there are no print leftovers in the resin vat or stuck to the FEP foil. 2. filter out the possible chunks - sort of - without removing the vat from the printer. Just submerge the tool into the resin vat…
Do pobrania moja wersja powiększonej baterii 2x, 3x i 4x względem wersji BL1518N do Makity, ja zrobiłem wersję 2x większą czyli 5s2p, dodaję 3 wersje tego adaptera do pobrania… - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i…
Address change ;) https://learn.adafruit.com/adafruit-vl53l1x?view=all # SPDX-FileCopyrightText: 2022 wrdaigle for Adafruit Industries # SPDX-FileCopyrightText: 2022 Kattni Rembor for Adafruit Industries # # SPDX-License-Identifier: MIT…
Where to put the vat when not on the printer? I made this simple tray to hold the vat/tank for the Prusa SL1S Speed printer. It will protect the FEP from damage and hold any spill from the vat if stored with resin (not recommended). The…
Prusa SL1S Speed Tank Cover for use with mounted tank screws Prusa SL1S Speed Tank Abdeckung zur Verwendung mit montierten Tank Schrauben
Upgraded SEEED Wio Tracker L1 E-ink made space for the maker focus 3000mah battery, and case made more compact, upgraded buttons, added a hook to the top, added supports to hold the screen. just a basic case note: its a different size…
Adapter to fit 2.5" drives in the HP ProLiant ML150 G6 3.5" drive tray. Should also work for ML330, ML350, ML370. Confirmed by users: ML110 G7 Updates: 26 May 2019 - Added v3 of the adapter, just optimized it to use less plastic.
Trichter zum Ablegen des Tanks direkt auf der Resin Flasche. Passt bei allen gängigen Flaschen. Auch das originale Sieb passt hinein.
Before I started designing, I had set myself the following goals. It should be as small as possible, but still have all-wheel drive and have suspensions. Of course, it also has to consist largely of 3D-printed parts. If you want to learn…
This is a remix (draft) of the "Makita Mega Battery for 18650 10x extended 15x 20x replica" ( https://www.thingiverse.com/thing:5026796 ) with the following changes: modified version of 1.stl + 2.stl to fit a BMS (BL1830) like…
This is belt holder for Wio Tracker L1 Pro. It has mount holes compatible with walkie-talkie belt clip for Baofeng UV-5R (costs about 1 USD). Clip allows holder to be attached to waist belt, backpack, pocket or something else. It has…
-I recommend printing from PETG with 100% infill. -The part is not symmetrical, you will need to reflect the 2nd half in the slicer. -I use Hobbywing 65A G2, most likely it will fit other ESC
It can be unsafe or risky to handle the construction platform full of resin with the risk of it being dropped - and worse if it falls into the tank or hits the display. The build platform on the Prusa SL1 and SL1S Speed has very little…
I used tinker to lengthen the clavicle because I wanted that broad shoulder look
Printed with 5 base layers, 3 perimeters, 0.4mm nozzle, 0.2mm layers, PETG (other materials could work too) Printed buttons and text in separate color. Remove the colors in the 3MF file if you can't print with multiple colors.
Happy printing, not sure if scale is giant. looked about right. happy printing.
Continuing with the Prusa mate series, I was Inspired by Mikolas Zuza's talking ClapTrap remix of Chaoscoretech's ClapTrap design. This design isn't a remix. Introducing the CL4P SL1. A unique combination of Borderlands ClapTrap and the…
A compact, 3D-printable case designed to snugly fit the nRF54L15 devkit.
This is a case for the Heltec T114 V2 for you to dangle on a bag, backpack, or set of keys as a neat “charm”. It includes space for a GPS module, as well as a RAK PCB antenna or OEM coil antenna. Materials Required Heltec T114 V2 nEF52840…
A dummy battery for Nikon en-el15, to fit Nikon D7100 camera and others. I've createed this in order to work on other projects. Category: Camera
I printed the wide version in ASA at 0.20mm layers which should have been pretty good. But the screw posts are not designed well (sharp corners) and one did break despite careful handling. I find the walls a bit thin and the accessory…
Design based from the original parts. works with standard resin. It might be printed with an 0.2 or 0.1 nozzle for FDM printer as well. After 6 months of daily use one part broke. I made a V2 of the hook a bit thicker at the base and add…
This is a tiny box to hold a wide NodeMCU board. The box is tall enough that you can cram a few select parts underneath the board. There's a cutout for the (ugh) micro-USB port, and a hole to stick a 3mm LED out, or run some wires…
Can be printed without supports. Wires protection must be printed in vertical orientation
This is a mount for a Hobbywing QuicRun 10BL120G2 ESC to be mounted in the stock ESC mounting holes for the Arrma Gorgon. Using the Stock mounting holes for the ESC this mount will allow the Hobbywing QuicRun 10BL120G2 to mount into the…
pasek do modelu 14 3dsets HDT 144-3M-06 drukować z tpu
The Wio Tracker L1 Series is a low-power, scalable Meshtastic node featuring LoRa (862–930 MHz), an nRF52840 for efficient processing, and an L76K GPS for precise location tracking. The L1 E-ink version supports a detachable E-ink display…
This is a case for the Wio Tracker L1 from Seeed Studio which can fit a 3000mah LiPo battery with the measurings 67.5 x 36 x 10,2 mm. Makes a good standalone Meshtastic device with the new firmware which has the virtual keyboard. Model…
L13 Sailor moon accessories
LIAN LI UNI FAN AL120 Cover for hiding dasy chain mechanism. One with chamfer, one without.
Commercial Use and Attribution Notice MeshPack Pro © 2025 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale, is permitted…
EDIT: I have redesigned after getting some excellent feedback. V5 Part A and Part B are below. I have designed a build platform holder for the SL1 because I am lazy. It works with low to mid sized models - taller models will still need…
BUY HERE WITH MAPS <<Etsy Shop>> This is a custom case for the Wio Tracker L1 E-ink kit from Seeedstudio . Battery: I was able to comfortably fit a 3000mah LiPo . Hardware: The WIO Tracker L1 is mounted to the case using two short M2…
I made a small remix of Michal Fanta's awesome Original Prusa SL1 calibration test model for Christmas. Merry Christmas! Print instructions The .SL1 file is printed in 0.025mm layers, Pad around object and support for the Santa hat. You…
The original iFlight XL10 GPS holder is for GPS modules with smaller antennas. I used the Foxeer M10Q-250 which has a bigger size of 25x25x8. This adapter fits the original end part from iFlight. Print at an angle (see pictures).
Designed this to hold (3) of my batteries and (4) SD cards so they are not bouncing around in my camera bag. The 2 parts screw together pretty tight so your printer needs to be dialed in.
Fits the 14 flute, 65mm oil filter used by the 2003 Suzuki VStrom.
A GL18 cap for laboratory test tubes and especially useful with the 4-port GL80 caps for Duran bottles. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 100 Filament: Generic ABS Category: Engineering
Simple SL1 Hose adapter for 40mm ID hose. Also included step file for modification. For correct usage, remove the original filter and use with your own strong exhaust system.
Other versions: 27.03.2022: ClipOn Handle for SL1/S Speed Platform V3 29.07.2021: ClipOn Handle for SL1/S Speed Platform Handling the build platform full of resin can be messy or unsafe if it is dropped - worse if dropped into the tank or…
Update January 10 I created a highly accurate .dxf/svg file of the SL1S precut FEP sheets and based this design off of that. Use double sides tape to hold the template down onto the protective plastic covering the FEP. I used a 2mm…
Designed up a holder for the Godox TL60 and TL120 because I'm not a super fan of the thin metal wire deal to hang the lights from. This slides right onto the handle and has holes to embed your own ¼"-20 threaded inserts. I recommend and…
Kluczyk do zastosowania z kluczem 13mm lub grzechotką ¼"
Printed on Elegoo Neptune 3 Plus
When I printed the original by spontaniel I found that the fit was too snug at default size and the battery retention nub didn't work if you increased the size. Since this is all very hard to see in still images I recorded a short video…
Official 3D print files for the CL1.
Since the official HPE price for a 4xLFF cage exceeds €200 in my region (Slovenia | EU), I decided to make my own. My server already has an 8xSFF HDD cage, so I designed an additional cage for LFF drives to prevent them from being stacked…
