Liczymy pasujące modele…
Are you annoyed that the perfect holder for you doesn't exist? Well, now you can assemble it yourself based on what you need. Not anything more, not anything less. This organizer is based on blocks you can slide into each other to form…
Print Z=0,2 perimeter=5 infill=50
Section 3: Catalogue of Significant Artifacts from Sector Ulysses, Site 23 3.7 Artifact VN-07-SU-23: Elaborately Carved Phallic Effigy Recovery Context: Artifact VN-07-SU-23 was recovered from Stratum III-b within Sector Ulysses, Site 23.…
Flexible rails for IKEA LILLABO, BRIO, LIDL train track Flexible rails which help to easily build the train track compatible with IKEA LILLABO, BRIO, LIDL The difference of this rails is the end - sometimes you need male-male of…
First, many thanks to Romain for inspiring this remix. My grandsons only know full speed and sometimes stop. So, the yellow caution lamp was replaced with a sliding shutter, exposing either the red or green ‘lamp’. Gravity reared its ugly…
These days it's important to keep your children entertained. Parents who need to work remote and keep their children busy is hard. I designed these models based om dimensions of the IKEA tracks. We are always struggling to make the track…
Aperture Science Laboratories – We innovate science! I like the overall aesthetics of the Portal games a lot. So, to fill a blank spot on a wall, why not use an oversized Aperture Labs logo? The logo This print represents the Aperture…
Yet another version of bricks to create bridges with IKEA Lillabo tracks and DUPLO bricks. Designed for an inclination of 2 DUPLO heights / 20cm track. Floor->Slope (bottom) Slope->Slope (middle) Slope->Bridge (top) Bridge->Bridge…
The paper is finally published and fully open-access! https://bsapubs.onlinelibrary.wiley.com/doi/10.1002/aps3.11562 We have only scratched the surface in developing 3D printable tools for COBLE. We began with microscope adapters and a…
RUS: Корпус для самодельного лабораторный блок питания, на основе модуля XY6020L и импульсного блока питания. Корпус спроектирован специально для печати на 3д принтере без поддержек. Список компонентов: Регулируемый модуль постоянного…
These days it's important to keep your children entertained. Parents who need to work remote and keep their children busy is hard. I designed these models based om dimensions of the IKEA tracks. We are always struggling to make the track…
cable slots 4 mm size W=30 x H=35 x L=164 mm best wall mounting with 3 x 20 mm countersunk screws. screw hole diameter 3.5 mm Print instructions print settings: PLA filament fill density 20% layer density 0.15 mm filament consumption:…
This is a buffer stop female and male version. Have a lot of fun with it. Print Settings Printer Brand: Anycubic Printer: Predator Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament: Filemantwerk PLA light ivory Category:…
I belive during this time it is important to educate ourselves to understand how somthing exists in such a complex biosphere thats why i would like to share my Lab glove Box that i designed myself and i hope that there is somebody out…
4 way intersection for Brio and Ikea LILLABO wooden train. Print-in-Place to make the intersection rotatable. Print settings: 0.2mm layer height slow down bridges and turn on fan (100%) PLA/PETG All credits go to LocoRico for that great…
Designed for Ikea Lillabo but will probably work with other brands like Brio. Happy Printing ! If you found this project helpful, you can Buy Me a Coffee at the link below : https://buymeacoffee.com/mars.explorer
Remix of the great GAZ66 model of Pfelpensson, here with standard box used in different modifications for maintenance/repair workshops, laboratories, field kitchens, medical service and many other purposes. Model is hollow with holes in…
Portal Aperture Laboratories Keycap printed with White and Black
Hello Everybody, I changed a little bit of Smuk3Ds Rail Crossing. ATTENTION: The gate and the pillar have to show a V when you are pushing it together. My kids are loving their new toy hope that your kids will love it, too. Happy Printing…
A replacement for IKEA Brio / Lillabo train toy crossing gate. As the gates / barriers easily break off, this print can be used as a replacement. It was modeled from the original, with a few minor modifications to simplify printing.…
Video: https://www.youtube.com/watch?v=dkfyw4iPtmQ I wanted to make my own train set, but instead of starting entirely from scratch, I decided to take advantage of the Ikea Lillabo/Brio track system. I was also inspired by the following…
OVERVIEW This series of funnels is designed specifically with single use, or single material use in mind. The word ‘disposable’ does not conjure up positive thoughts in this day and age, however the intent is that they can be used for a…
Original 3D files not available publicly. Designed my own inspired based on the original product. Created for backup and educational purpose because original files is not publicly available. Printed using eSun ABS, scaled at 100.50%(ABS)…
This is a useful laboratory clamp to connect/mount pipes/rods with a diameter of max. 14mm You need to cut a M8 thread and use 2 x M8 screws with hat, (file included) There are two different versions. Both work well, v2 minimizes…
A stencil of the Aperture logo from the Portal games designed to be used with fabric paint for my Chell cosplay
PC ATX low power lab power supply. Printing without support in 0.20 or 0.15 For the screws: 4x M3 of 5mm 4x 20mm wood 6x m2 4x molded nuts Electronic part: Voltage Regulator :…
Now on Printables only: https://www.printables.com/social/237650-mitch/prints I printed the turntable hack from ben8p but the design isn't working, since it doesn't have the right rail design (the V slot). Therefore I made my own version…
Here is my take on the laboratory rocker, which is a laboratory tool/device used in laboratories for mild to moderately aggressive biological and molecular mixing applications. Please, note that no model herein should be used for…
Labour Comb for giving birth and natural pain management. Print with 0.4mm nozzle a few degree hotter bed than usual, otherwise the thin tips can curl up. (The green image is a test printed with PLA, but print with PETG, PLA has a…
A solid base (support, arch, pillar) for ikea lillabo bridge. Our basic set came with a light plastic arch which ended up to be pushed away all the time. Later I found out that ikea used to make the bridge in one solid wooden part. I´ve…
This is a remix of Laboratory centrifuge less than 5$ by dustkris . I changed it's orientation so I can use it with Vertical Support for Dremel by RobJP_ . Printed with PETG and 100% infill - better safe than sorry! I made an additional…
I have constructed these attachments for the IKEA freight wagon. Prints the models in 0.2 layer height and does without supports. You will need the following magnets for some of the attachments: Magnets 6x1 mm These additional parts if…
Stativklammer für 8 mm Stangen. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthex M4s).
Dialysis clamp for closing freaking dialysis tubes for protein purification. Print instructions So this is my first project ever. I tried to print a clamp in one piece that would work for unfolded dialysis tubes to save some material and…
I designed this extruder visualizer based off the logo for Aperture Labs from the video game Portal for my shiny new Prusa MK3. I didn't want to deal with support material, so it lays completely flat on the print bed. In order to glue the…
Here are both possibilities in. Have fun. Print Settings Printer Brand: Anycubic Printer: Predator Supports: Yes Resolution: 0.2 Infill: 25% Filament: no information PLA ivory Notes: I have a Anycubic i3 Mega S. No Predator Category:…
This is a 3D printed piece that works as an interconnect between Duplo bricks from Lego and Brio or IKEA LILLABO wooden train tracks. I was inspired by http://www.thingiverse.com/thing:4041 , but after trying out a print, I found it too…
Surely you have a friend who likes the SCP Secret Laboratory game, this keychain is the perfect gift for him or her.
Raise your tracks to the next level using this awesome easy-to-print pillar that I have designed. There are various other designs available currently, but they either are hard to print or require a lot of material. This design is simple…
A case for a buckconverter/regulated power supply with usb connector. There is also one magnet on either side for easy storing of for example a screwdriver. Supplies: SK60 SK120 DC Buck Boost Converter = Aliexpress Female Barrel…
print with the big side on ground
This model is compatible with the lego system.
ARL-99 HELLDIVER From the Japanese multi-media franchise PATLABOR: The Mobile Police, the ARL-99 HELLDIVER is a Labor used by the Japanese Self-Defense Ground Forces, manufactured by Shinohara Heavy Industries. The OpenFigure3D version…
Remix of Brio switch featuring female and male connectors . Improved pins dimensions to fit perfectly with Ikea Lillabo tracks.
Dexter from Dexter's Laboratory Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
250 mL Flask Holder This flask holder is meant to hold 250 mL flasks in place on an orbital shaker, assuming your shaker has screw holes to attach flask holders. I remixed this 250ml Conical Flask Holder , making the following changes to…
This is my version of a mechanical switch for wooden track trains. Some may call it over engineered, but that's what I was asked for ;-) The tolerances of the connectors are quite loose, so it should work with most of the wooden track…
IKEA LILLABO - wood tracks with connector, does not fit BRIO
verstärkter Betätigungshebel
Power module https://www.aliexpress.com/item/1005005429587089.html Print without supports as showed in screenshot attached. Insert 3mm nuts into the holes in the case and fix cover with 3mm screw.
AAA case from https://www.thingiverse.com/thing:941081 I used standard DIY Gear Motor. Demo on Youtube
Holder for 13 vacutainer vials, easy print, no support needed
The ultimate STACKABLE laboratory organizer! Simple to print, customisable, .step and .shapr file incuded. Designed in Shapr3D. Print with PLA with 0% infill. Hope it works and helps! Happy printing, thanks for downloading
A GL18 cap for laboratory test tubes and especially useful with the 4-port GL80 caps for Duran bottles. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 100 Filament: Generic ABS Category: Engineering
Hello, i dont provide the sphere because of the logo, just create a Geosphere - Radius 120mm. Remember! just in case, if you scale down your sphere and the atlas-stand think of the dimensions of the cup for the cards.... because he will…
This is a Lego Duplo Brick <-> Ikea Lillabo Car adapter. Duplo plate code is the parameterized duplo block from @247generator. You can now use Duplo or compatible top on Lillabo wheelbase! Print Settings Printer Brand: Prusa Printer:…
Versatile modular laboratory stand ... more info now only czech (in e-Mole magazine http://www.e-mole.cz/cislo/e-mole-c-7-8 ). English BOM (on image 3): Bitbeam Holder (3D printed) - 1x Vertical Rider (3D printed) - 1x Horizontal Rider…
When handling samples obtained from difficult (environmental) matrices (e.g. manure, dirty surface swabs, or water), Nucleic acid extraction and purification often becomes problematic. Scaling up during epidemics or environmental…
Dee Dee from Dexter's Laboratory
Brio Rails Conjunctions compatible also with IKEA LILLABO, Playtive and others. I tested them with wooden and 3D parts from other people and it fits nicely. Printed using PLA. 17. 11. 2025: Added short rail.
GRIDFINITY laboratory organizer. 8 types. Use also this or other gridfinity grid base. Check also my other design, stackable laboratory organizer . Hope it helps, and happy printing!
These train pillars are designed to provide stable and reliable elevation for your wooden train tracks with the ability to stack. These pillars feature a solid, one-piece construction, offering a fixed height for creating bridges,…
Laboratory hand-crank centrifuge. This tool can be used in emergencies or in the absence of electrical power.
I designed these two vial holders to maximize practicality and efficiency in the lab. I currently use them, and so do some of my colleagues. These holders can accommodate various standard vials: The larger holder can accommodate up to…
This toy car is a direct replacement for the IKEA Lillabo platform and requires no screws for assembly! -- Please feel free to contact me to get further info on the model or for any printing issues. And don't forget to check my instagram…
A wall mount for measuring and laboratory cables. The distance between the arms is 4 mm. Easy to print!
This is a nice little precision pump and controller combination. It can dispense 100 ml/min at 300 rpm. I set the output to 1 amp and use 16 micro steps (set dip switches to 16 and F09 to 160). I use working mode 3 (F01 to P03) and a low…
Dexter from Dexter's Laboratory
Streamlined Lillabo Turntable for Wood Playsets Explore a fresh take on the Lillabo turntable enhancement, tailored for the IKEA Lillabo series. While reminiscent of previous designs, this rendition prioritizes simplicity and efficiency.…
DC-DC regulated laboratory power supply and meter made with an standard adjustable power supply module.
Made this simple rack for a colleague in the lab who needed a multi-size holder for an experiment. The rack can hold : 1x 50mL falcon tube + 2x 15mL falcon tubes and 6x 1.5mL eppendorf tubes I printed mine in PETG for its better chemical…
It's a replacement barrier for the Lillabo (IKEA) wooden train level crossing. The original (red) barriers break quite easily. These aren't much sturdier (it has two pins either side, one of them has a small diameter, so can't really…
Breadboard holder with laboratory plugs Breadboard:…
This is the last filament cleaner I will publish as I've printed far more than I'll ever use! The aim was to make one that I was totally happy with - quick to print, minimal materials, satisfying to use and pleasing to look at. A…
The Laboratory Mouse Monument is a monument in Novosibirsk's Akademgorodok, located in a park near the Institute of Cytology and Genetics (ICG) of the Siberian Branch of the Russian Academy of Sciences. The monument was unveiled on July…
There are a bunch of different clips uploaded by other people. I found them very hard to use and too difficult to remove. So I created my own version of the clip that is easy use and remove. It's neither too loose nor too tight and works…
This is a useful laboratory clamp to connect/mount pipes/rods with a diameter of max. 15mm You need to cut a M8 thread and use 2 x M8 screws with hat. (file included) here you can find the 90° version you might also be interested in my…
Stativplatte für 8 mm Stangen. Die Löcher zur Fixierung sind für kurze M4 Einpressmuttern konstruiert (z.B. Ruthex M4s). Die Platte ist 180 mm lang, damit sie auch auf den Prusa Mini passt. Das Model auf dem Foto wurde mit einer 0,6 mm…
Aperture Laboratories Plate that covers the USB port on the Creality K1.
I wanted a cross over that didn't have a straight through option, so trains would always cross over to the other side of the track, so I modified the original to suit my specifications. I've also applied a fix to the track to allow it to…
LILLABO Track Flex-Pack: Male-to-Male & Female-to-Female Adapters 🚀 Unlock new possibilities for your IKEA LILLABO train layouts! This essential adapter pack gives you the flexibility to connect any two track pieces, regardless of their…
This is a stackable bridge for our Ikea wooden train. I have revised it because the height of Ikea is 65 mm. First of all I did not want to make it stackable. But when I have printed the columns, my daughter wanted to build higher tracks.…
PLA, infill 15% no support For one base, you need 21 sticks. Stick are printed horizontaly for endurence. Tolerance: holes are 3.3 mm width, stick have 3 mm
Vial or test tube holder for easy filling and mass readings. 4 different angles available for ease of use, various vial sizes, and convenience. Warning: Check MSDS of chosen print material and any chemicals present. Due to the layered…
Summary This is set of 4 railroad switches or turnouts with control panel for Lillabo(IKEA) or Brio wood tracks. Heart of power box "3V 30RPM Mini DC Motor with Metal Gears - GA12-N20 Series" with two microswitches as end stops and two…
English Version: These are the things you need to print out: Cabin 1x Roof 1x Magnet holder 1x Crane head 2x Crank 2x Crank pin 2x Wagon 2x Winch 1x Wheel without rubber 8x or (optional) wheel with rubber 8x Assembly aid01 1x Assembly…
Debido a una necesidad específica, creé esta cadena de eslabones que están unidos entre sí por lo que NO permite movilidad adicional a la mostrada en la presentación. Consta de 13 eslabones y un aditamento para ser unido con tornillo a un…
HAWKINS NATIONAL LABORATORY SIGN Category: Signs & Logos
We have printed many parts of "Duplo/Lillabo bridge bricks", but in order not to have to print both directions (m/f and f/m), we made ourselves an adapter m/m. Same size as the original. Printed with Overture PLA for us it fit better at…
Made for the 71. Organic Supports flash contest The model should be printed with organic supports. These are not to be removed after the print as they represent sturdy trees holding the elevated scenic railway track overhead. The track is…
In unserer heutigen Zeit scheinen Züge mehr Fahrzeuge denn je von einem Ort zum anderen zu transportieren, und jedes Mal beobachten meine Kinder fasziniert, wie sie vorbeifahren. Aus diesem Grund wollte ich meinen Kindern eine zusätzliche…
Hi All, The first project I built back in 1990 when I graduated with a BS in Comp-Eng was a power supply. It has served me well all these years, but it was limited. So I decided on a new 3D printed update. I like Sebr's power supply…
I designed this overpass to let your train track smoothly transition into another room, just high enough to clear obstacles like door thresholds or carpets. To offer flexibility, I’ve included multiple versions of the overpass, with…
Abstract: The implementation of automation has already had a considerable impact on chemical and pharmaceutical industrial laboratories. However, academic laboratories have often been more reluctant in adapting such a technology due to…
Organize your lab bench with this universal, multi-tier tube rack designed to fit a wide variety of laboratory tubes and vials. The stepped layout provides easy access and clear visibility for each row, making it perfect for busy lab…
Crossover to equip a tapered joint NS14 (Normschliff 14) with a glass thread GL14. I printed it quite often in PETG and all are still in use. No support needed if printed upright - therefore the conical shape between the two connections…
A few days ago, I reached for a sample in my lab and I ended up knocking over lots of vials in the process of trying to get them organised. Never again! These organisers are secure enough to keep your precious samples safe. I also…
Just a normal chemical laboratory glass tube, but with the screw.
Printed on an FDM printer with 3 perimeters and 20% infill. Printed in PETG, but other materials (PLA, ABS/ASA) should be fine too. Thanks to kl4appdrachen and Gimble for sharing their models!
Fuente de alimentación para laboratorios, realizada con un fuente de PC ATX. Medidas de la Fuente de alimentación. Alto: 85,50mm. Ancho: 150,50mm. Largo: 140,50mm. Hay un fichero stl. llamado CAJA_FUENTE_ATX_CON_3.EV.stl Este fichero…
